Site Definition issues when entering remote info in DWcs3

good day,
I am hoping someone can assist me with getting one of my new sites up and running. I am still on Dreamweaver CS3 as my hard drive at thsi time can not support hte size of CS4. I have created a new website for a friend of mine and she has provided me what information she has from her service provider, however when i enter the information and test the connection i get an error telling me an FTP error occurred. My friend is using 1&1.com, i have never heard of them before but have gotten a domain name, a directory file name, a username, and a password from them. below are picutres of the error and what i am entering to try and upload the site:
could someone or would someone be able to help me out - i would be eternally grateful!

Host Directory is the location on the server where your files will be stored.
This will not be plain text with a space as you have entered. It will be a folder name provided by the host - or it may be blank.
The FAQs at 1&1 suggests that no host directory info is required:
http://faq.1and1.com/web_space__access/ftp_account/dreamweaver_guide/3.html
(Note: the above FAQ is incorrect in that it directs people to set up a remote site via New > FTP & RDS Server which is rarely the case.
The usual route is New > Site.)
http://faq.1and1.com/web_space__access/ftp_account/3.html
Also, uncheck the Use Firewall box.

Similar Messages

Site definition issue (maybe???)

My desktop computer had some issues and I am having a hardware and operating system upgrade done on it. It had six hard drives, none of which were damaged and all of the data is intact. This data includes all of my DW CS4 sites which are in one of two directorys (i.e, "Client A-M" and "Client N-Z"), under a client sub-directory in the client's name.
I have a free-standing docking station where I mounted the hard drive with the client files and copied them to an external drive which is attached to my laptop, which has a full CS4 Premium Design Suite, including DW CS4, installed. I have already edited and updated some sites, a couple with no problems, and a couple with some problems reocognizing and updating templates.
In a previous post, I addressed this issue and it was suggested that on the ones where I had problems, the issue was site definition files. I have just recieved a request to do some updating on a site which I have not opened on the laptop. As a prevention to avoid any problems, my quesiton is this:
Should I redefine the site in it's existing folder on the laptop as a new site since this installation of DW CS4 has never seen that site before and the subject site is not on its recognized list of sites.
Thanks in advance for you help,
Joe
PS: What is the file extension for the site definition files, and where do they reside on the computer?
J.

Without knowing the issues it's hard to determine. You could always try to bring the files over. Assuming your computer was setup with a RAID configuration and you didn't lose data then you should have no issues transferring the files. But if you were running 6 independent hard drives and you have already run into issues you may want to consider just entering the data in fresh just to ensure no corruption down the road. The files for the site definitions will vary. Typically on the Mac they are located in the Library->Application Support->Adobe->Dreamweaver CS5 folder, on Windows it's hidden away in the Application Data folder.

Xyz.xyz, OK, Site definitions issue

I've had this issue since Studio 8, and even with Studio 8
uninstalled completely, and with a fresh DW CS3 install, the
xyz.xyz issue is still haunting me.
When I go to add a new site, and get to the site definitions,
I click to select "local folder" for the files - it always shows:
File Name: OK
Save as Type: xyz.xyz
and when I browse to the folder I want my site in, it never
updates. It simply shows /
You can see the image here:
http://www.creationnation.com/dwcs3xyz.jpg
I can manually type in the location and it does fine, just
doesn't let me browse to the location.
If anyone can help me out I'd appreciate it!

Tell us EXACTLY the steps you follow to get to this point,
starting from the
Site manager, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Creation Nation" <[email protected]> wrote
in message
news:f8tsvo$b3t$[email protected]..
> I've had this issue since Studio 8, and even with Studio
8 uninstalled
> completely, and with a fresh DW CS3 install, the xyz.xyz
issue is still
> haunting me.
>
> When I go to add a new site, and get to the site
definitions, I click to
> select "local folder" for the files - it always shows:
>
> File Name: OK
> Save as Type: xyz.xyz
>
> and when I browse to the folder I want my site in, it
never updates. It
> simply
> shows /
>
> You can see the image here:
http://www.creationnation.com/dwcs3xyz.jpg
>
> If anyone can help me out I'd appreciate it!
>

Site Definition Issue

I am using Adobe Dreamweaver 8.
When I define a Dynamic site and enter the FTP login info AND
the FTP password Dreamweaver does not save it even though I tell it
too (The little box is checked).
So everytime I start Dreamweaver and put files to the server
I have to re-enter this information. As long as I leave Dreamweaver
running I don't have to re-enter the FTP info. But after shutting
Dreamweaver down, I have to re-enter the FTP info the NEXT time I
start it.
Is there a fix for this?
Thanks for any suggestions.
NTG2112

> I am using Adobe Dreamweaver 8.
known issue- dw8 and IE7 conflict.
go to the adobe.com site and get the 8.02 dreamweaver
updater.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

TS1424 Says to contact iTunes support to complete transaction when entering billing info

How do I fix my billing info? It says to contact iTunes support to complete this transaction. What do I do?

You can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

The last search site pops up when entering Mozilla why?

When I click on Mozilla logo to log on, the system brings up the last search made rather the home page, why?

Select one of these:
*Tools > Options > General > Startup: "When Firefox Starts": "Show my home page" or "Show a blank page"

Error creating acl for (resource). I get this error when entering security info in web.xml.

We're using iWS 6.0. Is there some security configuration that needs to be done in order to use standard security directives in our web application's web.xml?
Thanks!

Hi ,
I have tried adding the following into web.xml but the security feature just doesnt work and the user can go to any page without any restriction.
<security-constraint>
<web-resource-collection>
<web-resource-name>Declarative Security Test</web-resource-name>
<url-pattern>/SuperServlet</url-pattern>
<url-pattern>/*</url-pattern>
<http-method>post</http-method>
<http-method>get</http-method>
</web-resource-collection>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
<auth-constraint>
<role-name>guest</role-name>
<role-name>member</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
</login-config>
<security-role>
<role-name>guest</role-name>
<role-name>member</role-name>
</security-role>
The roles mentioned above have been added correctly into tomcat-users.xml..The version of tomcat I am using is tomcat5.0.28.Please help.

Site Definition - local info, remote info confusion

Hi,
I am new to DW CS4, but doing well getting to know it.
In the Site Definition dialog, Advanced Tab:
Local Info:
Links relative to document is selected.
-- HTTP address -- I'm not quite sure which of the following to use:
http:/www.johnblaustein.com -- this is my site
http://johnblaustein.com/var/www/html/ -- this is the folder on the server that stores the site.
Remote Info -- set as follows -- which works fine to connect:
Access: FTP
FTP host: johnblaustein.com
Host directory: /var/www/html
QUESTION: On the Local Info Tab, which of the above two addresses do I use? I think I simpy use http:/www.johnblaustein.com, but I am not sure. Also, do I need the "www"?
Thank you.
John

Yes, that's kind of what I thought, but I wasn't sure. The /var folder is not visible on the web.
Thanks for the quick reply.
John

Site definition files

I had to reinstall my dreamweaver software completely, and
now I would like to reconstruct my site definitions without
manually entering them all again. Unfortunately i didn't export
them before my computer crashed. I have all the files that
dreamweaver created before in the application data folders etc and
I was wondering if there is a way that I could use that with my
newly installed dreamweaver to recreate teh site definitions?
thanks

a0123aa wrote:
> Unfortunately i didn't export them before my computer
crashed. I have all the
> files that dreamweaver created before in the application
data folders etc and I
> was wondering if there is a way that I could use that
with my newly installed
> dreamweaver to recreate teh site definitions?
Unfortunately, no. I'm not sure where site definitions are
kept on a
Mac, but on a Windows machine, they're stored in the Windows
registry.
Site definitions can be automatically rebuilt only if you
exported them
in the first place.
David Powers
Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
http://foundationphp.com/

Error clears remote info

Dreamweaver sometimes says something to the tune of "index
not found in site" and then clears my remote info. Wtf?

They should look in their own tech articles. I had the same problem and this solved it:
http://docs.info.apple.com/article.html?artnum=93061
With one caveat. The article talks about creating a shared folder in the Users folder, but I could not create it there even with Admin permissions. However, I could create it somewhere else and paste it into the users folder, the change the permissions.
Makes no sense, but seems to solve the problem!

Need help : cannot anymore select local info in site definition only remote

Hi
I made the mistake choosing in site deffintion for remote info and not local info
Now it seems impossible to reverse it cannot anymore select local info in site definition only remote
So now I can not make the site normally.
I've closed dreamweaver a couple times and tried it again and even my pc but it seems to be something irreparable?
Does anyone know a better idea than reinstall?
thank you
Paul

You are on the Basic Tab of the Site definition dialog in DW CS3. Unfortunately, that's also the more confusing way to define a site. Nevertheless, you'll note that there are 3 selections across the top of the dialog:
1. Editing Files
2. Testing Files
3. Sharing Files
Have you already filled out the first two?
A site definition in DW *could* only have the first of those three filled out - you really only need the local site defined until you are ready to upload your files (assuming you are only creating static pages - that is, pages without server scripting).
To define most remote sites, all you need to do is to select that you connect to your remote server using FTP, and then to state the folder within which your website files are stored on the remote server (often this is a folder called 'www' or 'wwwroot' or 'public_html').
In my mind, the better way to define a site is to go right to the Advanced tab - it's less confusing because you just fill in all of the fields without going through this 'wizard-type' interface....
So - does that help at all?

Remote and Testing Server Site Definitions

I am confused about what information I should put in my
remote site definition info and testing server FTC Host directory
text boxes. My host placed 3 directories: database, log, and www on
my server and Dreamweaver placed two directories, Connections and
_mmServerScripts in the same directory as the above 3. I have
placed all of my site files, including my home page and folders in
the www directory and my Access database in the database directory.
Dreamweaver placed the connection info in the Connections folder an
d _mmServerScripts in the same directory.
In order to construct my local site to match the remote site,
I created a www folder on my local site and placed all of my HTML
files and supporting folders in it.
From various Adobe Tech Notes I have read, I was led to
believe my FTP host directory
Should be www/. However, when I do this and create a new web
page on my local site and upload it to my remote site, Dreamweaver
creates a new www directory inside of the one my host created on
the remote site and uploads the file to it instead of placing it in
the www directory my host created. Also, when I use F12 to test my
page in my browser I get a 404 page not found because Dreamweaver
placed a www in the page URL that shouldn’t be there and
after I remove it I’m able to see my page in my browser. My
URL prefix on my testing server site definition is:
http://I.P.number.html.
What am I not doing right?
Should I use www/ as my FTP host directory or leave it blank?
Also, what should my URL prefix be?
Thanks for your help.

What you need to do is set up so that in the remote server
you point to the
www level on the server, and don't replicate this locally.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"Jim_Moore" <[email protected]> wrote in
message
news:[email protected]...
>I am confused about what information I should put in my
remote site
>definition
> info and testing server FTC Host directory text boxes.
My host placed 3
> directories: database, log, and www on my server and
Dreamweaver placed
> two
> directories, Connections and _mmServerScripts in the
same directory as the
> above 3. I have placed all of my site files, including
my home page and
> folders
> in the www directory and my Access database in the
database directory.
> Dreamweaver placed the connection info in the
Connections folder an d
> _mmServerScripts in the same directory.
>
> In order to construct my local site to match the remote
site, I created a
> www
> folder on my local site and placed all of my HTML files
and supporting
> folders
> in it.
>
> From various Adobe Tech Notes I have read, I was led to
believe my FTP
> host
> directory
> Should be www/. However, when I do this and create a new
web page on my
> local
> site and upload it to my remote site, Dreamweaver
creates a new www
> directory
> inside of the one my host created on the remote site and
uploads the file
> to it
> instead of placing it in the www directory my host
created. Also, when I
> use
> F12 to test my page in my browser I get a 404 page not
found because
> Dreamweaver placed a www in the page URL that shouldn?t
be there and after
> I
> remove it I?m able to see my page in my browser. My URL
prefix on my
> testing
> server site definition is:
http://I.P.number.html.
>
> What am I not doing right?
> Should I use www/ as my FTP host directory or leave it
blank?
> Also, what should my URL prefix be?
>
> Thanks for your help.
>
>

Issue with Enter-PSSession when running from the shell and via script

Hello
Can someone please help me with the following issue
If I open the PowerShell console and do the following
Enter-PSSession -computername Server1
"This is a test" > C:\Log.txt
Exit-PSSession
It works e.g. the Log.txt file is create as expected on Server1
However if I put the exact same command in a script and execute the script.
./TestScript.ps1
The Log.txt file is created on my Client (e.g. PC) and not the Server1
I also tried using $Session = New-PSSession -ComputerName Server1 etc.....
then Enter-PSSession -Session $Session
I also tried Enter-PSSession etc....
Start-Sleep -seconds 60
"This is a test" > C:\Log.txt
Exit-PSSession
Again no luck when running from shell all OK, then executing as a script (again from the command line) files is created on client
Any ideas why this is happening please and how to resolve, I am using PowerShell v4 on the client and PowerShell v2 on the Server
Thanks
AAnotherUser__
AAnotherUser__

No, the command is explicitly designed for interactive use, not within a script. If you see
http://technet.microsoft.com/en-us/library/hh849707.aspx you'll even see it clearly state that it "Starts an interactive session with a remote computer".
There are quite a few threads elsewhere on the same subject, all of which say the same thing, for instance
http://powershell.com/cs/blogs/tips/archive/2010/11/15/enter-pssession-do-s-and-don-ts.aspx and
http://powershell.org/wp/forums/topic/running-multiple-remote-commands-with-enter-pssession/ and
http://blogs.technet.com/b/heyscriptingguy/archive/2009/10/29/hey-scripting-guy-october-29-2009.aspx and
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/7e89b957-ff5b-42c4-b107-d7e18752fcf1/enterpssession-within-a-script
So when you run it interactively, you've started the interactive connection to the remote computer and are now running the relevant commands on that machine. When you run it from the script it starts the remote connection, but crucially it doesn't use that
new connection, the script is still being run in the current local session.
When you think about it makes sense. Using the Invoke-command method you're connecting to a remote machine, sending the script block to the remote machine, and then running that block of code on the remote machine. The remote machine only knows about the
code you send it, not the rest of the script (which is why if you use variables you have to pass them to invoke-command otherwise they won't be available to the script block on the remote machine. Conversely, when you use the Enter-PSSession method, you've
connected to the remote machine, but you haven't passed any code to it. At that point you're on the remote machine, but it has no way to know what you want it to do since your script code is on the local machine. It can then either return to the local
machine and run the next line of code locally (which it does), or sit there connected to the remote machine waiting input that will never come (which would be even less useful).

Issue in Custom Blog site definition based on SharePoint 2010 blog site definition after migrating the sites to SharePoint 2013 and site collection upgrade

I have created a custom blog site definition using SharePoint 2010 blog site definition with Configuration ID 31 in onet.xml (new value). This was working fine for SharePoint 2010.
We created new SharePoint 2013 farm and deployed the all Custom solutions in
14/15 folders. After migrating the sites to SharePoint 2013 using Content DB approach, site created previously using my custom definition are working fine.
But after running site collection upgrade these sites stop working. When I post a comment then comments not getting listed on post detail page. However comments are getting added to Comments List but
PostTitle column of Comment is not getting populated.
Also, when we create a new site in SharePoint 2013 using my custom blog template then that is also not getting provisioned. default.aspx and look-up between post and comment list are not working.
If any one has faced such issue then please share your findings and any solution to fix this.
Thanks in Advance :)

Hi ,
According to your description, my understanding is that the blog based on custom blog site definition didn’t work correctly after migrating custom blog site definition to SharePoint 2013.
If you customized the Onet.xml file in a previous version's site definition, you should modify some sections in the file to work in the current version, like <BaseTypes> and <ListTemplate> etc. More information, please refer
to the link below:
http://msdn.microsoft.com/en-us/library/office/aa543837(v=office.14).aspx
For that the PostTitle column of Comment is not getting populated, please try to modify the view, then compare the result.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Communication between Lync - Mediant . 488 evt from mediant site when SBC Remote Early Media RTP parameter is set to Delayed

Hi,
I have a problem with Early Media functionality between Lync and Mediant 1000 E-SBC. If SBC Remote Early Media RTP parameter is set to Delayed (on IP Profile Settings level) i cannot establish connection. After receiving 183 Session progress (from Lync site)
call is released with 488 event (488 is sent from mediant site). Before "Not applicable here" in logs i can see:
6d:9h:46m:35s (      lgr_flow)(18219     ) #MediaResourcesConnector::AllocateMediaResources
(lgr_media_connector)(18220     ) MediaResourcesConnector:CalculateResourcesForAppExtensions Leading:DSP Opposite:NONE MediationLevel:NONE
(lgr_media_service)(18221     ) ServicesMngr: Allocate Media channel. current active: 0 and max is: 0
6d:9h:46m:35s (lgr_media_service)(18222     ) !! [ERROR] ServicesMngr: Cannot allocate more Media channel. current active: 0 and max is: 0
6d:9h:46m:35s (lgr_media_service)(18261     ) (#292) ChannelResource Deallocated.
6d:9h:46m:35s (lgr_media_service)(18262     ) (#293) ChannelResource Deallocated.
I need this because if im using SBC Remote Early Media RTP = Immidiately i cannot hear ringtone. Could someone give me any clues what is wrong in config?
I enclosed detailed logs:
Log is Activated 6d:9h:46m:35s (       lgr_sbc)(18057     ) (#51) SBCRoutesIterator Allocated.
(       lgr_sbc)(18058     ) Classification Succeeded - Source IP Group #2.
(       lgr_sbc)(18059     ) CallAdmission::AddDialog: Type INVITE Direction In IP group 2: 1 SRD 2: 1 SRD ovflw:1 used unres:1
(      lgr_flow)(18060     ) (#51)SBCRoutesIterator::Change State From: InitialRouting To : AlternativeRouting
(       lgr_sbc)(18061     ) CallAdmission::AddDialog: Type INVITE Direction Out IP group 1: 1 SRD 1: 1 SRD ovflw:1 used unres:2
(      lgr_flow)(18062     ) (#51)SBCRoutesIterator::Next route found: Route by: IPGroup , IP Group ID: 1, Live:1
(       lgr_sbc)(18063     ) Routing Succeeded -IP2IPRouting Rule #2.
(      lgr_flow)(18064     ) ---- Incoming SIP Message from switch:5060 to SIPInterface #2 UdpTransportObject[#2] ----
6d:9h:46m:35s INVITE sip:1234@Mediant;user=phone SIP/2.0
Allow: INVITE, ACK, CANCEL, BYE, PRACK, NOTIFY, REFER, SUBSCRIBE, OPTIONS, UPDATE, INFO
Supported: replaces,timer,path,100rel
User-Agent: OmniPCX Enterprise R10.1.1 j2.603.33.a
Session-Expires: 1800;refresher=uac
Min-SE: 900
P-Asserted-Identity: "TPSA 12" <sip:221111111@switch;user=phone>
Content-Type: application/sdp
To: <sip:1234@Mediant;user=phone>
From: "TPSA 12" <sip:221111111@switch;user=phone>;tag=434636a077aeb3418ef3d5c0887debbd
Contact: <sip:221111111@switch;transport=UDP>
Call-ID: 5050e7eb34568795c049d14a6b088172@switch
CSeq: 1290334631 INVITE
Via: SIP/2.0/UDP switch;branch=z9hG4bK668ced008893ef177292c6f0f662ca02
Max-Forwards: 70
Content-Length: 265
v=0
o=OXE 1415263596 1415263596 IN IP4 switch
s=abs
c=IN IP4 172.16.20.32
t=0 0
m=audio 32156 RTP/AVP 8 4 97
a=sendrecv
a=rtpmap:8 PCMA/8000
a=ptime:20
a=maxptime:30
a=rtpmap:4 G723/8000
a=ptime:30
a=maxptime:30
a=rtpmap:97 telephone-event/8000
(     sip_stack)(18066     ) New SIPMessage created - #57
(     sip_stack)(18067     ) New SIPSBCCallLeg created - #1695
6d:9h:46m:35s (     sip_stack)(18068     ) New AcSIPCall created - #1922
(     sip_stack)(18069     ) AcTransactionUser::AddMessageToQueue: Queueing message
6d:9h:46m:35s (     sip_stack)(18102     ) SIPCall(#1922) changes state from Idle to Invited
6d:9h:46m:35s (     sip_stack)(18164     ) SIPCall(#1921) changes state from Idle to Inviting
(     sip_stack)(18165     ) SIPSessionTimer<TU#1921>::FillSTRequestData - Session-Timer mode: TRANSPARENT
(      lgr_flow)(18166     ) ---- Outgoing SIP Message to Lync2:5068 from SIPInterface #1 TcpTransportObject[#648] ----
6d:9h:46m:35s (      lgr_flow)(18178     ) ---- Incoming SIP Message from Lync2:5068 to SIPInterface #1 TcpTransportObject[#648] ----
SIP/2.0 183 Session Progress
FROM: "TPSA 12"<sip:221111111@switch;user=phone>;tag=1c1656521459
TO: <sip:1234@Mediant;user=phone>;tag=499c98c8cd;epid=DE8F26F104
CSEQ: 1 INVITE
CALL-ID: 1656462877611201494635@Mediant
VIA: SIP/2.0/TCP Mediant:5068;branch=z9hG4bKac1657277504;alias
CONTACT: <sip:lyfe02.grupa.lukas:5068;transport=Tcp;maddr=Lync2>
CONTENT-LENGTH: 281
CONTENT-TYPE: application/sdp
ALLOW: CANCEL
ALLOW: BYE
ALLOW: UPDATE
ALLOW: PRACK
REQUIRE: 100rel
SERVER: RTCC/5.0.0.0 MediationServer
Rseq: 1
v=0
o=- 89 1 IN IP4 Lync2
s=session
c=IN IP4 Lync2
b=CT:1000
t=0 0
m=audio 52882 RTP/AVP 8 97
c=IN IP4 Lync2
a=rtcp:52883
a=label:Audio
a=sendrecv
a=rtpmap:8 PCMA/8000
a=rtpmap:97 telephone-event/8000
a=fmtp:97 0-16
m=audio 0 RTP/SAVP 8 4 97
(     sip_stack)(18180     ) New SIPMessage created - #55
(      lgr_flow)(18181     ) |       |(SIPTU#1921)183 State:Proceeding(1656462877611201494635@Mediant)
6d:9h:46m:35s (   lgr_stk_ses)(18182     ) |       |       |       #1694:SIP_ALERT_EV(1656462877611201494635@Mediant)
(     sip_stack)(18183     ) SDPBody::New - id = 126
(     sip_stack)(18184     ) SDPBodyMedia::New - id = 541
(     sip_stack)(18185     ) SDPBodyMedia::New - id = 540
(     sip_stack)(18186     ) <BaseSIP SDPSESSION #1694> UpdateChosenMediaByCN - CN as Remote -1
(     sip_stack)(18187     ) SDPBodyMedia::New - id = 539
(     sip_stack)(18188     ) SDPBodyMedia::New - id = 538
(   lgr_stk_ses)(18189     ) SBCOfferAnswerMngr(#1694) changes state from SIP_MEDIA_OFFERING to SIP_MEDIA_COMPLETED
(   lgr_stk_ses)(18190     ) <SESSION #1694> SendToCall - event: MEDIA_NEGOTIATION_COMPLETED_EV m_Call#1852
(      lgr_flow)(18191     ) |       |       (#1852)SBCCall <- (#1694)SIPSBCCallLeg: MEDIA_NEGOTIATION_COMPLETED_EV
(      lgr_flow)(18192     ) |       (#59)SBCCallPlacementFeature <- (#1852)SBCCall: MEDIA_NEGOTIATION_COMPLETED_EV
(      lgr_flow)(18193     ) |       (#1853)SBCParticipantEndPoint <- (#59)SBCCallPlacementFeature: MEDIA_NEGOTIATION_COMPLETED_EV
6d:9h:46m:35s (      lgr_flow)(18219     ) #MediaResourcesConnector::AllocateMediaResources
(lgr_media_connector)(18220     ) MediaResourcesConnector:CalculateResourcesForAppExtensions Leading:DSP Opposite:NONE MediationLevel:NONE
(lgr_media_service)(18221     ) ServicesMngr: Allocate Media channel. current active: 0 and max is: 0
6d:9h:46m:35s (lgr_media_service)(18222     ) !! [ERROR] ServicesMngr: Cannot allocate more Media channel. current active: 0 and max is: 0
6d:9h:46m:35s (lgr_media_service)(18261     ) (#292) ChannelResource Deallocated.
6d:9h:46m:35s (lgr_media_service)(18262     ) (#293) ChannelResource Deallocated.
6d:9h:46m:35s (      lgr_flow)(18263     ) |       |       (#1853)SBCCall <- (#1695)SIPSBCCallLeg: RELEASE_EV
(      lgr_flow)(18264     ) |       |       (#1853) SBCCall changing states from:AlertingState to:DisconnectingState
(      lgr_flow)(18265     ) |       (#1852)SBCParticipantEndPoint <- (#1853)SBCCall: RELEASE_EV
(      lgr_flow)(18266     ) (#1852) SBCParticipantEndPoint changing states from:InitiatedState to:ReleaseingState
(      lgr_flow)(18267     ) (#1035)SBCController <- (#1852)SBCParticipantEndPoint: RELEASE_EV
(      lgr_flow)(18268     ) |       |       (#1035) SBCController changing states from:EstablishingState to:DisconnectingState
(      lgr_flow)(18269     ) |       (#1853)SBCParticipantEndPoint <- (#1035)SBCController: RELEASE_EV
(      lgr_flow)(18270     ) (#1853) SBCParticipantEndPoint changing states from:InitiatedState to:ReleaseingState
(      lgr_flow)(18271     ) |       (#59)SBCCallPlacementFeature <- (#1853)SBCParticipantEndPoint: RELEASE_EV
(      lgr_flow)(18272     ) (#59) SBCCallPlacementFeature changing states from: Initiated to: Releasing
6d:9h:46m:35s (      lgr_flow)(18273     ) |       |       (#1852)SBCCall <- (#59)SBCCallPlacementFeature: RELEASE_EV
(      lgr_flow)(18274     ) |       |       (#1852) SBCCall changing states from:AlertingState to:DisconnectingState
(      lgr_flow)(18275     ) |       |       |       (#1694)SIPSBCCallLeg <- (#1852)SBCCall: RELEASE_EV
(     sip_stack)(18276     ) New SIPMessage created - #52
(      lgr_flow)(18277     ) |       |(SIPTU#1921)DISCONNECT_REQ State:Proceeding(1656462877611201494635@Mediant)
(     sip_stack)(18278     ) New SIPMessage created - #49
(      lgr_flow)(18279     ) ---- Outgoing SIP Message to Lync2:5068 from SIPInterface #1 TcpTransportObject[#648] ----
CANCEL sip:1234@Mediant;user=phone SIP/2.0
Via: SIP/2.0/TCP Mediant:5068;branch=z9hG4bKac1657277504;alias
Max-Forwards: 70
From: "TPSA 12" <sip:221111111@switch;user=phone>;tag=1c1656521459
To: <sip:1234@Mediant;user=phone>;epid=DE8F26F104
Call-ID: 1656462877611201494635@Mediant
CSeq: 1 CANCEL
User-Agent: E-SBC/v.6.60A.260.002
Reason: SIP ;cause=488 ;text="488 Not Acceptable Here"
Content-Length: 0
(     sip_stack)(18281     ) Resource SIPMessage deleted - #49
6d:9h:46m:35s (     sip_stack)(18354     ) New SIPMessage created - #42
(     sip_stack)(18355     ) Resource SIPMessage deleted - #42
(      lgr_flow)(18356     ) |       | TransactionUserMngr::ReturnTransactionUser - #1921
(     sip_stack)(18357     ) SIPCall(#1921) changes state from Disconnected to Idle
6d:9h:46m:40s (     sip_stack)(18358     ) New SIPMessage created - #47
(     sip_stack)(18359     ) Resource SIPMessage deleted - #47
(      lgr_flow)(18360     ) |       | TransactionUserMngr::ReturnTransactionUser - #1922
(     sip_stack)(18361     ) SIPCall(#1922) changes state from Disconnected to Idle

Hi,
On Mediant 1000 E-SBC SBC tab, when set Remote Early Media RTP Behavior to
Delayed, but also check if the following configuration set correctly:
SBC Media Security Behavior: SRTP
PRACK Mode: Optional
Remote Update Support: Supported Only After Connect
Remote Re-INVITE: Supported Only With SDP
Remote Delayed Offer Support: Not Supported
Remote REFER Behavior: Handle Locally
Remote 3xx Behavior: Handle Locally
Enforce MKI Size: Enforce
You can refer this
link
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Site Definition issues when entering remote info in DWcs3

Similar Messages

Maybe you are looking for