Site Displays Perfectly in DW Preview But Not When Uploaded
Hi,
I have a site which displays fine in IE, both the CSS and
XHTML validate and when I use the FF preview in looks just fine.
However when I upload the site to the server, the footer and a
couple of images are missing and I'm just can't figure out why. All
the paths are correct but I just can't figure out why it displays
correctly in the preview FF and it's not when uploaded and viewed
in FF. Site diplays in IE without any problems via preview or
upload.
Any help?
I think you'll need to post a link or some code.
Regards
Martin
Similar Messages
-
Site works in preview but not when uploaded to the web
I have been trying to add a link from my website to another project I have been doing, a mini site made with Flash.
I wanted the link to open up a new window with the animation playing inside, and it works perfectly when I use "preview in safari" within dreamweaver, but now I've uploaded to the web it just opens up a blank window.
This is the url for the homepage:
http://kayleighthompson.com/
and the link is the ActiveAid button at the bottom of the navigation list.
If anyone knows how to get this working I'd be very grateful! It's for a uni project due in this afternoon :SI think you may be having a problem with how Flash is displayed. The Flash on the first page doesn't display in IE8... although it does in Chrome. The second page doesn't display in either. Your link is correct. I checked that.
Wish I could be more helpful, I'm having the same issue with IE and DW CS4 myself, and can't figure it out.
This may help: http://code.google.com/p/swfobject/wiki/documentation
Good luck! Let me know if you figure it out.
[email protected] -
Text visible in preview but not when uploaded.
I'm designing a mobile site in Muse.
The fonts I'm using are from the Museo family through Typkit.
I've uploaded the site a few times during the design process and had no trouble with text frames or text appearing.
Yesterday I added a new text frame in one section to link to a phone number and now sections of text are not visible when I upload the site. It is, however visible in the Muse preview!?
I've tried creating the text boxes from scratch but they still disappear in that particular section of the site.
Does anyone know why this is!?
The pale grey line is the text box where the text should appear.Hi Michael,
It works fine at my end, please try clear browser cookies/cache and then check. If possible, check this on a different device and see how that goes.
- Abhishek Maurya -
Dynamic text works in preview but not when uploaded
Can someone help me resolve as to why my dynamic text works
in DW8 preview by I get an error after FTPing the page.
Warning: require_once(/Connections/oneandone.php)
[function.require-once]: failed to open stream: No such file or
directory in /homepages/0/dxxxx/htdocs/xxxcom/index_by_town.php on
line 1
Fatal error: require_once() [function.require]: Failed
opening required '/Connections/oneandone.php'
(include_path='.:/usr/local/lib/php5') in
/homepages/0/dxxxx/htdocs/xxxcom/index_by_town.php on line 1
My testing server is my remote server.
Thanksah ha sorted - seems to have something to do with relative
links. Changing site root relative links to document relative links
has done the trick.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=263&threadid=1154447&hi ghlight_key=y&keyword1=virtual%28%29 -
Standard text displayed correctly in print preview but not in print
Hi,
I have a script in which a standard text has to be printed in the output.
The standard text contains some german characters.
These characters are displayed correctly in print preview but not in print.
The text is maintained in 3 languages DE,EN and Russian.
The same text is being printed in some standard report. But that is displayed correctly both in print and print preview.
Please suggest something.
Regards,
Richa AggarwalHi Richa,
Check this document from SAP: [help doc|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0652a95-5f0b-2a10-5aba-c085f8bbe6d6?QuickLink=index&overridelayout=true]
It indicates that you have to be sure to select "Unicode" fonts for your SAPScript form to ensure the proper printing of "Unicode" characters. If a character does not display then that means it does not exist in the font that you are using.
Regards,
Ryan Crosby -
Load swf works in Publish Preview but not when published
Hi Folks,
I having a problem where im trying to load two 1mb SWF movies into my Flash piece. It works fine in Publish Preview but not when I finally publish. I get this error in IE:
SecurityError: Error #2000: No active security context.
I have googled around and there is some talk online of a hack where by you get a timeout to overcome this. However im not so technical do I dont really know how to do this to my code in AS3. My code at the moment is below.
Any help would be much appreciated and rewarded with Karma
movieClip_12.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_9);
var fl_Loader_9:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_9:Boolean = true;
function fl_ClickToLoadUnloadSWF_9(event:MouseEvent):void
if(fl_ToLoad_9)
fl_Loader_9 = new Loader();
fl_Loader_9.load(new URLRequest("search.swf"));
addChild(fl_Loader_9);
else
fl_Loader_9.unload();
removeChild(fl_Loader_9);
fl_Loader_9 = null;
// Toggle whether you want to load or unload the SWF
fl_ToLoad_9 = !fl_ToLoad_9;
movieClip_14.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_10);
var fl_Loader_10:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_10:Boolean = true;
function fl_ClickToLoadUnloadSWF_10(event:MouseEvent):void
if(fl_ToLoad_10)
fl_Loader_10 = new Loader();
fl_Loader_10.load(new URLRequest("refunds.swf"));
addChild(fl_Loader_10);
else
fl_Loader_10.unload();
removeChild(fl_Loader_10);
fl_Loader_10 = null;
// Toggle whether you want to load or unload the SWF
fl_ToLoad_10 = !fl_ToLoad_10;I think this is either a problem with my site preLoader or my external .swf Loader. I was checking out the bandwith profiler and saw something weird and I wondered if anyone could explain...I've added a picture. I have a blank frame on only my actions layer to export classes to and it seems that frame 2 is "bleeding" into frame 1. Could this be my problem? Why would this happen? Thanks
-
Captivate 3 shows skin in preview but not when I run after published?
Captivate 3 shows skin in preview but not when I run after published. It shows it is included, what's up?
Is the Skin externalised? If so, perhaps Flash Global Security is interfering:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-flash-global -security
You could also try NOT externalising the skin. -
Flash video works onDreamweaver preview but not after uploaded to site
Hi,
I created a page with FW CS3 and opened it with Dream weaver.
Using Flash CS3 I created some video clips. I then inserted three
video files to the web page. In DW preview mode I can see the
videos. I copy the source code and pasted it to the index page of
my website as well as uploaded all the sit files from my hard drive
folder to the website. The page comes up but not the videos.Search this forum for "FLASH" "UPLOAD". You'll find hundreds
of answers.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"SERocks" <[email protected]> wrote in
message
news:g11qep$n8m$[email protected]..
> Hi,
> I created a page with FW CS3 and opened it with Dream
weaver. Using Flash
> CS3
> I created some video clips. I then inserted three video
files to the web
> page.
> In DW preview mode I can see the videos. I copy the
source code and
> pasted it
> to the index page of my website as well as uploaded all
the sit files
> from my
> hard drive folder to the website. The page comes up but
not the videos.
> -
Background image displays locally in HTML5 template but not when published
I have used an excellent HTML5 template which uses JavaScript to display background images. However while this file works locally it doesn't when published. The site structure is sound and I notice this happens with the source files I downloaded also so it's nothing I have done in my build which could have caused this.
This is the link to my site, everything is fine except the background image not showing.
http://www.khawkinsdesign.com
Any ideas, as I say fine locally, not fine when published?
Message was edited by: Kyle HawkinsHi Kyle,
I realise you posted your question a couple of days ago but it looks like your background image issue may now be fixed?
In any case, your site has a few issues. Not sure who told you the template was HTML 5 but they might be yanking your chain. There is nothing HTML 5 about the code used and the DOCTYPE is from HTML 4. As such, some of the code you have used is throwing up errors - some related to the DOCTYPE and some where you haven't closed the tags:
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.khawkinsdesign.com%2F&charset=%28detect +automatically%29&doctype=Inline&group=0
<ul id="footer-nav">
<li><a href="index.html">Home</a></li>
<li><a href="portfolio.html">Portfolio</a></li>
<li><a href="about.html">About</a></li> /*The closing tag is missing in your code */
<li><a href="contact.html">Contact</a></li> /*The closing tag is missing in your code */
</ul>
It would be best to amend the errors but some might disappear when you add the HTML 5 DOCTYPE in to your code. Things like your lack of "type" on the sources is a required v4 attribute, but not in v5.
<!DOCTYPE html>
Have a read through this for more info - this is a great resource for everything HTML 5. http://diveintohtml5.info/
Rik
EDIT:// It seems that the DOCTYPE is the 5 version on all but the home page so you may only have one to correct. However, there are still no HTML 5 elements used to take advantage of the new DOCTYPE. -
Works in preview but not when published in captivate 8?
My youtube widget used in captivate 8 works just fine in the preview, but when published there's nothing where the video should be, any idea as to why?
Hi Robert,
as far as I understand your post, you are missing some kind of "button-artwork" in the published file, but do not report a problem with the "action" that the script should perform.
My guess would be that it will be hard to help you without having a better understanding what your trying to achive and how (are you using a prebuilt component, or did you build the button fron scratch etc....)
It might be even necessary to have a look at the fla itself.
M -
Chinese characters appear OK in preview but not when printed
I am working on sap script .
In which I am facing problem in printing Chinese character.
In the spool(print preview) I am able to see Chinese characters printed but while printing on a paper it is appearing as '#' Characters.
I am using Font Family as COURIER in basic settings and If I try changing Font to CHSONG(Chinese character font), alignment getting distorted.
I have tried several options available in SDN, but not able to find exact solution on the issue.
Please help me with proper solution.HI friend,
Try changing the device type which suits the Chinese font. There are many device types which support device types.
Example : CNSAPWIN.
Just try this friend. If you face queries please revert back to me i will help you.
Thanks,
Sri Hari -
PayPal button action works in preview but not when published
Hi!
Any thoughts as to why this works correctly in CS5 publish preview but when I publish it I either get no action or (XP comupter) or a blank page (vista). Any thoughts or insight would be appreciated. Also, I'm new to flash and here's the button action:
on (release) {
//create the LoadVars that will hold our paypal information
var paypal = new LoadVars();
//specify the business, amount of the item, shipping, etc.
paypal.cmd="_xclick";
paypal.upload="1";
paypal.business="[email protected]";
paypal.currency_code="USD";
paypal.amount="275.00";
//paypal.handling = "0";
//paypal.no_shipping = "0";
paypal.item_name="One Session";
//added
//paypal.lc="GB";
paypal.bn="PP-BuyNowBF";
//paypal.no_note="1";
//send our information to PayPal, including all the optional variables we have collected from customer
paypal.send("https://www.paypal.com/cgi-bin/webscr","_blank","POST");
Thanks!
RobertHi Robert,
as far as I understand your post, you are missing some kind of "button-artwork" in the published file, but do not report a problem with the "action" that the script should perform.
My guess would be that it will be hard to help you without having a better understanding what your trying to achive and how (are you using a prebuilt component, or did you build the button fron scratch etc....)
It might be even necessary to have a look at the fla itself.
M -
Menu audio will play during preview but not when disc is burned.
Encore CS6.
Menu music plays fine in preview. I know that the file is good. No menu audio after disc is burned. Have tried several different transcoding options. There is menu video too that is working fine.Here are notes I couldn't find before I posted that; just general re testing methods:
Mounting an iso (or building to a folder) is a great way to test. There are some differences, but it is a great method prior to burning to a disk. The main difference is simply computer vs dvd player - autoactivate on a button doesn't work with a mouseover, and you can be fooled into thinking your navigation does, or does not, work. (Even on the computer, don't use the mouse for testing, use the "remote" in the player controls.)
Encore preview is an emulator, like computer DVD players, that attempts to predict what will happen when a disk is played on a set top DVD player. It has always had issues with some predictions not being accurate. Some inaccuracies are like this one: Encore preview does not work, and a burned disk will. Others are the opposite; it works in Encore preview, and not in a DVD player. The point to be made here is that you cannot rely on Encore preview. You also cannot rely on computer playback of a built image or folder. And, in the end, you cannot rely on playback on one DVD player - some disks work on some players and not on others. -
Cfmail - works locally but not when uploaded
Hi,
I'm using cfmail with form variables for the email addreses.
It's so users can send email to political candidates. Here's the
code:
<cfoutput>#Form.semails#</cfoutput>,<cfoutput>#Form.hemails#</cfoutput></p>
<cfmail to="#Form.semails#,#Form.hemails#"
replyto="#Form.useremail#" failto="[email protected]"
from="#Form.useremail#" subject="Keep Maine Toxin-Free!"
server="mail.nosuch.com" port="26" timeout="40"
username="[email protected]" password="nosuch">
#Form.usermessage#
</cfmail>
The form submit page collects those variables and passes them
as form variables - GET. The "to" field in cfmail is populated by
hidden fields that contain session variables... they're forwarded
on as those .semails and .hemails form variables. Actual values
have been replaced with "none" or "nosuch" for security, but you
can see the structure anyway.
This works when run locally, sends the emails as it should.
When uploaded exactly as is to godaddy's server, it doesn't send
emails. Doesn't throw any errors, the form results page displays as
it should... but the emails just never get sent.
I'd really appreciate any ideas...
JoeAdam Cameron wrote:
> I don't know how these shared hosting outfits work, and
what access you
> have to what, but here's some questions:
>
> - have you inspected the mail logs to see if they cast
any light on the
> scene
> - have you configured CF to tell it where the SMTP
server is?
> - do you need to authenticate to it, and that sort of
thing?
> - are the email messages failing @ the CF end (in which
case they'll be in
> the mail/undeliverable dir (not entirely sure that's the
name of it, but
> have a shufti around in the cfusion dir...), or are they
getting to the
> SMTP server and failing there (check the SMTP server's
logs).
>
Unfortunately all that can't be done by us users of these
shared hosting
outfits. You'll need to contact GoDaddy support and ask them
to take
these steps. I'm sorry about your probably experience with
this.
While I use GoDaddy for my personal hosting where I care more
about not
spending a great deal of money over high performance. I do
not wish my
support experiences on anybody. If you know ColdFusion well
and can
tell support what needs to be done, they should be able to do
it. Or,
more likely, you would be able to figure out the self help
tools to do
it yourself. But, unless this has changed since my last
experience,
their support staff is not ColdFusion literate and are unable
to guide
other, inexperienced ColdFusion users.
Saying all that. Email works just fine on my GoDaddy website
and I do
not believe I had to do anything special to use it. -
Video plays in swfiles but not when uploaded to website
Hi, does anyone have any idea why videos embedded in a swf
file play okay in the swf file or when tested as a movie on the CS3
stage, but when uploaded to my website will not play? I am
completely baffled by this.
My website link is at
http://www.marykingmedia.com/marykingmediafive/index.html
On the Bolivia and Chile page the videos do not appear once
the video is uploaded to my website. I have no idea why this should
be when the actual videos play perfectly well within the swf file
itself. I have put the encoded flash videos inside the same folder
as the swf file and uploaded everything, but no joy.
The swf file is 2.97 MB; not sure if that would present any
problem or not once uploaded
My video on another project plays fine at
http://www.marykingmedia.com/marykingmediafour/index.html
Can anyone cast any light on what the problem is with my
South America project?
Thanking you all..Hi xchanin, thanks for your feedback. I dont quite understand
what you mean by this part here ... but if you do that process a
couple of times (with the same .mov file) you get the same .flv but
the name of your video is incremented by one each time?
Pretty well much I followed this tutorial
http://multimedia.journalism.berkeley.edu/tutorials/flash/building-flash-templates/adding- video/
I put a FLVPlayback component on my Flash stage.
I encoded my videos in the CS3 video encoder and followed the
settings given in the above tutorial link. I did not resize or crop
the videos, I set the quality to medium and I gave my videos a name
prior to encoding it.
After encoding the film, I highlighted the FLVPlayback
Component and in the parameters found the content path and then
linked that to my encoded videos one by one. Then I saved my
worked, played it in the movie tester and then I exported my swf
file to my Dreamweaver folder, but I did rename my exported file
(it is not the same name as my Fla file). Could that make a
difference? I also put my Flv videos in the same folder as my swf
file and uploaded them to my server. I put the swf file on my html
page and then uploaded that to my server. My website shows the swf
file but the videos do not appear at all. However, the videos do
appear in the actual swf file when I play that.
I would be grateful to know if you see anything wrong with my
working process here. Could the renaming of the exported file have
caused the problem?
Thanking you.
Maybe you are looking for
-
Hello Guys Can any one pass on a document that will explain what are the check points that to be monitored on a daily basis for a Application Server? We have several issues where users are complained about load balancing / Citrix / connection issues
-
N81 BUG: date jumps to nearest event entry(date) i...
Hello folks, I have the following issue: After firmware update to 21.0.010 I found a weired bug: In may case I have a Calendar entry for 18 September of type "Anniversary" with alarm turned on for the same day (time 13:00) and I have noticed in the l
-
Blurry/Pixilated Slide Show
I have created a slide show in Photoshop Elements 10. I clicked on output to send it to Premiere Elements 10 because my pictures were blurry/pixilated when I viewed them in full screen preview, but were not blurry/pixilated in the screen above the ti
-
JAAS or regular J2EE Security?
Hi, can some offer me some examples of why I should prefer JAAS (and vice versa) over J2EE security via constraints and roles in web.xml? I'm just not sure which to use... Thanks...
-
PS CS3 force quit, lost all preferences and actions
I had PS open but no images open, surfing in Safari (downloading some files). Spinning ball of death, so I leave it for a couple of mins. Keeps spinning. Leave it 5 mins. Walk away to have a break and let it sort itself out. Half an hour later, still