Hi,
The site loads within 10 seconds at my end.
The bandwidth (modem/connection speed) also plays a major role in determining the time it takes for a web page to load on your computer.
You may also check the site performance at:
http://tools.pingdom.com/
Regards,
Sonam

Similar Messages

Site does not show correct on Samsung Tablet

Hi all,
I've seen a few questions regarding Muse sites not being displayed correct on a Samsung Tablet. My problem is similar but still different. The site is displaying correct on the desktop/ipad/iphone but not on the Samsung Tablet.
In the previewt his is not shown. Now I also know that the preview more or less simulates how a site should look.
This is the site: www.uwpersoonlijkeoptieadviseur.nl (a dutch site).
I have looked at the links and they seem to be ok. I mean all the links link to the Tablet version.
cheers,
Larry

Hi sanjit, the thing is that on a samsung tablet from around 3 years old the problem occurs. But on a samsung tablet almost a year /2years old the site displays correct.
Both of them has got android 4.04
See the image with the specs in which it loads correct.(white background)
And here the specs of a older one (dark grey one And arround 3 years old)
And this problem occurs:
So on a newer tablet it shows correct.
Verstuurd vanaf mijn iPhone
Op 1 apr. 2014 om 17:22 heeft Sanjit_Das <[email protected]> het volgende geschreven:
Re: Site does not show correct on Samsung Tablet
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi Larry
Please let me know if there is any specific page element not showing up correctly on Tablet.
Also which browser are you using , browser version would help. Do you see the same problem with any other browser on same tablet.
The device details would also help.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6261109#6261109
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6261109#6261109
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6261109#6261109. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Edge animation on muse site does not show in IE 11

Hi
I made an anmation with Edge (2.01.268.25632) and published it as an oam file which was placed in Muse (7.1).on the Homepage. When published to BC everything works fine with all browsers.
However when the site was ftp uploaded to its hosting company (not BC) the animation does not show in Internet Explorer 11. Tried HTML export instead and ftp upload with Dreamweaver without result.
Any thoughts? Client does not want to install Chrome or Firefox Which have no problems with the animation. Thx. Henk

Hi
I made an anmation with Edge (2.01.268.25632) and published it as an oam file which was placed in Muse (7.1).on the Homepage. When published to BC everything works fine with all browsers.
However when the site was ftp uploaded to its hosting company (not BC) the animation does not show in Internet Explorer 11. Tried HTML export instead and ftp upload with Dreamweaver without result.
Any thoughts? Client does not want to install Chrome or Firefox Which have no problems with the animation. Thx. Henk

Css-file on Romote Site does not show changes

hello
I use Dreamweaver CS4 on Win7 64bit system.
I have a new website in construction and today the developer made changes to the Style.css file. Made the changes on an other computer and not in Dreamweaver.
Now, when I open the Style.css file from the Remote Site, it does not show the changes that were made. However when I delete the Style.css file in my Local Files directory and copy the Style.css file from the Remote Site to the Local Files and open it from the Local Files in Dreamweaver, it shows the new file with the changes that were made. But the Remote file keeps showing the old data.
I took several steps to try to eliminate this problem. Closing Dreamweaver and deleting the Configuration folders in Users>[NameUser]>AppData>Roaming>Adobe>Dreamweaver CS4> Both in en_US and nl_NL, although the latter did not contain any files.
This did not work. Deleted the Style.css file on my Remote Site and uploaded it again from my Local Files. Nope. Still shows rthe css-file with the old data.
Anybody any idea where Dreamweaver gets these old data from and how to make it work differently?
greetings, Lex van de Oudeweetering

Hello Ken
I did not say my page is troubled. The trouble is that the style.css file opened from the Remote Site in Dreamweaver shows the wrong data, but in effect has the right data, because when copied to the Local Files and opened from there it shows the right data.
The link to the page/site in construction is http://www.lex-illustrator.nl/lexillus
And I have made screenshots of the opend css files and assembled them beside each other.
On the left opened from the Local Files and on the right side the same css file opened from the Remote site.
The orange dots indicate where they differ, the green ones the items that were changed today. So it's not a problem of only today.
http://www.lex-illustrator.nl/2xcss.gif
And I have to say I had issues before with updating files to the Remote server and how Dreamweaver shows them. Much of the times I have to delete the Remote file first to get it dispayed right if I check if it has worked by trying to open it from the Remote server.
So it's not only limited to this site under construction. It looks like a Dreamweaver thing to me.
Greetings, Lex

Background for site does not show up after uploading to webhost...

My background for my website does not show up on my webhost after uploading site with Dreamweaver.
Here is my site: http://legacyofys.comxa.com/
Here is the backgroud image: http://point-file-manager.000webhost.com/index.php?ftpserver=legacyofys.comxa.com&ftpserve rport=21&username=a2022293&language=en&skin=blue&ftpmode=automatic&passivemode=no&sslconne ct=no&viewmode=list&sort=&sortorder=&state=view&state2=image&directory=%2Fpublic_html%2Fim ages&entry=Background.png
I know the background image successfully uploaded to my webhost, because it shows up in my file manager. What is wrong here? How do I fix this?

So it was a path issue :-) Glad you sorted it .
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

A web wiget using java acript in my web site does not show up with Firefox but does with ie; how can I fix it?

I have inserted a java script web wiget on my web site by copy and paste. It works fine in IE (shows, updates data etc). In FFox it does not even show up and no error messages are given. If I look at the code in FFox, it is shown. Is there a problem with my web site or am I short something in FFox?

To avoid confusion:
*http://kb.mozillazine.org/JavaScript_is_not_Java

In the YouTube site does not show a word - Download.. - above the any video clip I chose!! Why? Is there a solution?

When I want to carry any video clip from youtube I can not because I do not find the word - Download - On top of that section, which usually I find when I use a browser other than Firefox.

I understand that much. On my MAC Mini, if you look above at original post, I CAN see both OS while in the Windows 7 partition or the MAC OS. This is NOT the case on my iMac. Again, when in the MAC OS I can see the windows partion and move information between the two that way. When in the WINDOWS partition, the only one that shows is the Windows OS from my computer or network. The only way you can tell its even a MAC is the bootcamp icon in the bottom right corner of toolbar. Both have same version of MAC OS so both should work same way.. When i double click on my computer, it should show both the Windows drive AND the MAC (as does my mini and another iMac 21.5 that i have). This iMac does not do that - only shows windows.

Master Password Feature: After sometime (10-15 min.) the drop down list for the field on any site does not show; opening new window (not refresh or new tab) drop down appears.?

I manage a ton of accounts for different customers suing the same login pages (GoDaddy, WordPress, etc.) I use the Master Password Feature to help keep track of the many variants in logins and passwords.
After some unknown period of time, even closing the page tab so a new page session is started at the remote server, Firefox does not provide me with the usual drop-down selection list of the previously used login names. However, if I open a new FF window (file/new window) from the menu bar, the drop down becomes available.
How can I refresh the original window session in FF or change the timeout length?

Well, you said LOV...that might mean you are using JDev 11g. Are you? If so what technology stack are you using?
Assuming you are using JSF (?) you might be "backing" your list component in the application scope...but that is not likely.
If you are using ADF/BC on your business component level, you can clear your view object from which you are querying the possible values of this list...unless your you have made a method to compile this list...in which case you know what you are doing...so that is probably not the case.
Essentially you want to requery the VO upon which your LOV is based...unless you are using JPA or something...and then I know "requery" is not the right word...is it?

The iWeb '08 nightmare has begun! My ENTIRE site does not show up in iWeb!

*Remember the whole iWeb 1.0.1 fiasco?* I think we are all gonna have to live through that again with iWeb '08. During the first fiasco, it took Apple more than 2 months to issue a fix, lets hope it doesn't take them as long this sime.
*So my problem:* I imported my iWeb 06 domain into iWeb 08. It was a simple site with only 8 pages. Of those 8 pages, only the first page shows up in iWeb 08. All the other pages are just blank!!!!! I don't know what to do. Can someone please help me as I need to get changes to my site online ASAP!

We had the same problem.
Here's what we did.
I don't think that this first step is crucial but I'll include it as it was what we did.
1. move the Domain file from
~/library/application support/iweb
to the desktop
2. option-click on iweb application to open it
3. select "open domain"
4. locate the domain file you wish to open
That's it
This also fixed a publishing problem we were having as well
the only issue with this "fix" is that when you open iWeb after doing this, iWeb will ask you to select a domain each time. We deleted the prefences for iweb which fixed this issue but took us back to square one regarding the sites content.
I'd rather select the domain each time I open iWeb than be faced with a page without content
Hope this helps

My website- created on iWeb (Mac) now uploaded to hosting site, does not show content on 4 pages of photos, though Safari shows everything. ???

All the photos were saved on jpeg format. You can see the text on each page of concern, but not the photos. I have added music to each page of concern with a button to manipulate on/off, and pasted jpeg photos to them which you can see, and music plays with no problem. I re-built the site and uploaded again to hosting site, and am having same problem. Safari shows all pages, text, jpeg photos/music without any problem. So I have a site of 6 pages, and only 2 are completely loadable with Firefox. I have made all updates that have come from Firefox. My Mac is OS X version 10.5.8

Make sure that you use the latest version of the iWeb software to generate the galleries. Older versions of iWeb had problems in current Firefox versions.
A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.
The helpers at that forum are more knowledgeable about web development issues.
You need to register at the mozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=25

Width of my site does not show properly on phones

If you visit www.emilseres.com from a cellphone (let's say iPhone), why doesn't the width of the site show properly? On your right there will be a white stripe.
What do I have to change in Muse? (I do not want to create a seperate phone design.)
Other improvements would also be appreciated
Thank you for your time.
Kind regards,
Nephor

Hi Nephor
Please check if there is any empty text frame or rectangle placed on right side of the page as it will cause the page to stretch thus space will appear.
https://forums.adobe.com/message/6098206
Thanks,
Sanjit

The web site of Adobe does not show correctly in FireFox

I have a bizarre problem. The site of Adobe (including where I can download the flash player) does not show correctly in FireFox and I only see it as a text HTML page, but without most images (typically, for instance, I do not see the image "Download now" but see a text line "Dowload now", and so on...
This seems to specifically affect the Adobe web site as I have no problme for other web sites (so far).
It is something specific to FireFox as I do have the problem with Internet Explorer.
The problem persis even if I restart FireFox without any add-on (safe mode).
Any suggestion ?

Does this only happen in Firefox? What do you see with Internet Explorer or Chrome? If it is only Firefox, I'd try these steps in this order:
1. Clear your cookies and cache
2. Reset your Firefox settings
3. Make a new profile
Chris

New Domain Controller does not show in our different site's Domain controller's Sites and Services

Hi,
we have two sites in our AD environment. OMA site and NY site. we have three domain controllers in our OMA site and two domain controllers in our NY site. All our DCs are windows server 2008R2 except one in our OMA site that is 2003R2 the domain
functional level is also 2003R2.
We decided to raise our functional level to 2008R2. I added a new domain controller in our OMA site and transferred all FESMOS from the DC that was running 2003R2 to this new domain controller.
the issue now is that our NY site does not make any connection with the new domain controller in OMA site. it does not even show it under sites and services. I have checked the DNS settings and everything. if you try to replicate the connections
from NY site it gives the following error: "The naming context is in the process of being removed or is not replicated from the specific server."
can anyone plz tell me why this is happening mt brain is just frozen at this moment and cant figure out why is this happening

Just noticed this replication issue has been going on for a while now but we never noticed until I added new DC. here is the error log for the NY site DC.
Log Name:      Directory Service
Source:        Microsoft-Windows-ActiveDirectory_DomainService
Date:          1/4/2014 8:11:40 AM
Event ID:      2042
Task Category: Replication
Level:         Error
Keywords:      Classic
User:          ANONYMOUS LOGON
Computer:      NORDC1.vertrue.com
Description:
It has been too long since this machine last replicated with the named source machine. The time between replications with this source has exceeded the tombstone lifetime. Replication has been stopped with this source.
The reason that replication is not allowed to continue is that the two DCs may contain lingering objects. Objects that have been deleted and garbage collected from an Active Directory Domain Services partition but still exist in the writable partitions
of other DCs in the same domain, or read-only partitions of global catalog servers in other domains in the forest are known as "lingering objects". If the local destination DC was allowed to replicate with the source DC, these potential lingering object
would be recreated in the local Active Directory Domain Services database.
Time of last successful replication:
2013-05-16 15:26:38
Invocation ID of source directory server:
9236ac56-d046-4632-b072-acbe823c5f6c
Name of source directory server:
accde843-11b2-476c-9783-9b29252d0ba5._msdcs.vertrue.com
Tombstone lifetime (days):
90
The replication operation has failed.
User Action:
The action plan to recover from this error can be found at
http://support.microsoft.com/?id=314282.
If both the source and destination DCs are Windows Server 2003 DCs, then install the support tools included on the installation CD. To see which objects would be deleted without actually performing the deletion run "repadmin /removelingeringobjects
<Source DC> <Destination DC DSA GUID> <NC> /ADVISORY_MODE". The eventlogs on the source DC will enumerate all lingering objects. To remove lingering objects from a source domain controller run "repadmin /removelingeringobjects <Source
DC> <Destination DC DSA GUID> <NC>".
If either source or destination DC is a Windows 2000 Server DC, then more information on how to remove lingering objects on the source DC can be found at
http://support.microsoft.com/?id=314282 or from your Microsoft support personnel.
If you need Active Directory Domain Services replication to function immediately at all costs and don't have time to remove lingering objects, enable replication by setting the following registry key to a non-zero value:
Registry Key:
HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Allow Replication With Divergent and Corrupt Partner
Replication errors between DCs sharing a common partition can prevent user and compter acounts, trust relationships, their passwords, security groups, security group memberships and other Active Directory Domain Services configuration data to vary between
DCs, affecting the ability to log on, find objects of interest and perform other critical operations. These inconsistencies are resolved once replication errors are resolved. DCs that fail to inbound replicate deleted objects within tombstone lifetime
number of days will remain inconsistent until lingering objects are manually removed by an administrator from each local DC. Additionally, replication may continue to be blocked after this registry key is set, depending on whether lingering objects are
located immediately.
Alternate User Action:
Force demote or reinstall the DC(s) that were disconnected.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS Replication" />
    <EventID Qualifiers="49152">2042</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>5</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-04T13:11:40.963263500Z" />
    <EventRecordID>38018</EventRecordID>
    <Correlation />
    <Execution ProcessID="660" ThreadID="1596" />
    <Channel>Directory Service</Channel>
    <Computer>NORDC1.vertrue.com</Computer>
    <Security UserID="S-1-5-7" />
</System>
<EventData>
    <Data>2013-05-16 15:26:38</Data>
    <Data>9236ac56-d046-4632-b072-acbe823c5f6c</Data>
    <Data>accde843-11b2-476c-9783-9b29252d0ba5._msdcs.vertrue.com</Data>
    <Data>90</Data>
    <Data>Allow Replication With Divergent and Corrupt Partner</Data>
    <Data>System\CurrentControlSet\Services\NTDS\Parameters</Data>
</EventData>
</Event>

Google map widget does not show up in published site. Any suggestions?

After I've dragged the google map widget onto my page and publish it, it does not show up in the published site. Any suggestions?

Try publishing to a local folder and double clicking the index.html file to launch your site in the browser direct from your hard disk to see if the map works.
Where are you publishing to - MobileMe or another server?

Site Window does not show any item

Hi,
My site window does not show any items/folders to modify after I open my site. I was wondering if there is anyone who can point out what I did wrong. Usually the site window shows all the contents as soon as the site is opened. Please help. Thank you.
coskinas

If you look inside the webcontent folder, in Finder view (or Explorer???? if you're using Windows) - anyway, are there in fact files in there?
Try Site > Update > Refresh all.
If that doesn't work, try making a new site from existing content, which should give you a new site file (call it something slightly different) sitting beside your old one. I'm guessing here, but it can't hurt.

Site does not show up on PC in Chrome

Similar Messages

Maybe you are looking for