Site fails to refresh properly

While browsing the boards on 4chan i noticed that sometimes the pages will not refresh properly unless i do a ctrl+f5 refresh. Also since the URL uses frames, all this does is bring me back to the home page, it looks like firefox doesnt know how to refresh a framed site properly.
This started happening about the itme 5.0 was released i believe.
Ive tried clearing cache and cookies to no effect.
Since this happens randomly it is also extremely difficult to test using different profiles.

...So what happens when i install firefox 5.01 and its still not working?
I dont see why i need to download and install firefox 5.01(which btw takes up more of my very small cap per month) just so i can tell you its still not working. Do you have any particular methods you want to try that will work ONLY in firefox 5.01?

Similar Messages

Flash site fails to display properly in internet explorer.

I am having trouble finding out why
http://websitemedia.net/playground/ferrioni/sandbox/
fails to display properly in internet explorer ! The same site,
http://websitemedia.net/playground/ferrioni/sandbox/,
displays properly in firefox.
I have checked & rechecked everything.
What am i missing?
BL

It played fine at my side too.
What version of flash you are using to create that swf?
Make sure you have compatible version of flash player for
your internet explorer.
Try update your flash player to the latest version.

Flash site fails to display properly in firefox & ie.

Greetings all,
site below fails to display properly. When i visit the link
below using firefox or ie6, i see it fine. but when anyone else
visits it they see it with defects.
defects include product text overlapping the fg&m logo,
ferrioni home designs, inc header is cut off and only part of it
displays, featured products headers is also cut off and only part
of it displays.
http://www.websitemedia.net/playground/ferrioni/sandbox/index.html.
have tried the following.
**made sure latest flash player is installed where customer
fails to see the site display properly.
**made sure latest ie and firefox browsers are installed
where customer fails to see the site display properly.
One important note, we are export flash movie using flash
vesion 6.
Need some insight on how to make sure everyone sees the site
displayed properly.
Thanks in advance
BL

This is just a wild guess but... Be sure that you have
properly embedded any needed fonts for dynamic or input
text.

My site fails to display properly, but seems fine when previewed in Flash.

Very basic set-up: I have a Flash page that previews perfectly fine when in Flash, but after uploading the .html and .js files to my host, my website doesn't display. However, the color background of the page is displayed, and the vertical scroll bar is active (because the page is very tall), but nothing shows up. Might anyone have an idea of what my problem is?

This is just a wild guess but... Be sure that you have
properly embedded any needed fonts for dynamic or input
text.

SharePoint 2013 - PowerPivot - The following connections failed to refresh.

Thanks for taking a look. I have tried countless blogs and other forum posts and can't seem to resolve this.
I am working on SP2013 with SQL Server 2012 in a single farm environment. My domain is on another VM.
I am using interactive refresh. (Click Data > Refresh All Connections) from the PP Workbook in SharePoint.
The connection is embedded.
I am getting the error "We were unable to refresh one or more data connections in this workbook. The following connections failed to refresh: (Name of my connection). The connection is using windows authentication
What I have tried:
I have checked ULS Logs, nothing showing up unfortunately.
I checked local system messages on server, nothing there.
I changed both the PowerPivot and Excel Services application pools to run under Domain\Administrator
I changed both the PowerPivot and Excel Services unattended accounts to run under Domain\Administrator
Ran IISReset command from windows powershell.
Restarted SSAS Services
Verified the Server was registered in Excel Services (Data Model Settings)
Verified that data refresh was enabled on the PowerPivot workbook at the site collection level.
In central administration I set the business hours to 6am - 8am for data refresh so this would not be an issue.
I verified that the Secure Store Service is started in central administration
I have also ran SQL Server Profiler and all I see is this error, i'm not even sure it's related. Searching the error hasn't helped:
"The commit or rollback request cannot be completed because there is no active transaction in this session."
I verified that Claims to Windows Token Service is running in central administration.
I've tried editing the workbook connection to use specified accounts as well. When I do that I get the following error:
An error occurred while accessing application id SP2013\Administrator from the Secure Store Service. The following connections failed to refresh: (My connection name).
Any help or direction would be much appreciated. Thanks.

did you try below technet guide?
Unable to refresh data for a data connection in the workbook. Try again or contact your system administrator. The following connections failed to refresh: PowerPivot Data
also check this guy:
http://voices.yahoo.com/powerpivot-error-unable-refresh-data-data-11642048.html?cat=15
Are you using the office web apps?
https://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/01/31/powerpivot-for-sharepoint-browser-refresh-fails-data-refresh-not-supported-in-office-web-apps.aspx
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Perform Client Action (SCCM) returns "Failed to refresh Client"

Hey folks,
I am using the System Center Orchestrator since a few days. I have the following Idea: Start virtual machines in SCVMM which are offline and to perform a client action (via SCCM) to roll out the new updates our company released.
For the beginning I test it with one virtual machine. The machine starts and after a delay of 80 seconds the process "Perform Client Action" also does. However I get a few error variants. For the first time I get the error, that the access is denied.
So I changed the connection options to the following:
- Authentication Level: PacketIntegrity
- Impersonation Level: Impersonate
- Enable Privileges: False
- Locale: MS_407 (Germany)
- Timeout (Seconds): 20
- Username: ourdomain\the_admin_domain_ user_on_the_client
- Password: mypass
After this change I don´t get the error about the access, but another one, which says "Failed to refresh client". So I tried different variants, changed the Authentication Level, Impersonation Level etc. and disable the firewall on the client,
but I only got one of the explained errors..
Can anybody give me a hint to resolve this error? Which reasons could the error "Failed to refresh client" have?
Many thanks for your help,
Simon

Hi,
have you already looked at
http://technet.microsoft.com/en-us/library/hh967538.aspx
"This activity connects to the client computer using a remote WMI connection and does not connect to the Configuration Manager Site server. Specific firewall settings are a prerequisite for this activity to function correctly. For more information about
remote WMI see Connecting to WMI on a Remote Computer in the Microsoft MSDN Library (http://go.microsoft.com/fwlink/?linkID=184817).
Connecting remotely using WMI also requires appropriate credentials. If the account used for the Orchestrator Management Service does not have rights to access WMI on the target computer you will need to specify an account that does by using the optional
properties on the Connection tab. For more information about WMI security and connection settings, see
Securing a Remote WMI Connection in the Microsoft MSDN Library (http://go.microsoft.com/fwlink/?linkID=144681). "
I think you need to check the account for the Runbook Service.
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Itunes: Application Failed to Initialize properly

I'm not sure what is going on with my computer. I tried to open my Itunes and I receive the following error: Application failed to initialize properly (0Xc0000005).
So I tried to download Itunes from the Apple site. It downloads, however, when I try to install it I get the following error message: 1608 unable to create InstallDriver Instance, return code 2147287015
Can someone help me work through these problems? All my songs are still in the folder, I just can't get into Itunes so I can update my Ipod, which is 30mg (if that helps!)
Thank you in advance. Have a great day.

Perform a Thorough & Complete Uninstall and Reinstall of iTunes/QuickTime
(Compiled from the collective wisdom of toonz and Da Gopha)
If you want to guarantee a successful upgrade and be proactive about minimizing potential install issues, do the following:
1. Completely Backup your music and iTunes library files.
2. Virus check / spyware scan your machine. Use several quality programs to completely scan your PC – all drives. EWIDO seems to be one used by many here. Free at: http://www.ewido.net/en/
3. Completely remove / uninstall the current version of iTunes and QuickTime from your system.....
3a. - Turn off all security software such as Norton, McAfee, SpySweepers, any TSRs, etc. (exit via the system tray)
3b. - Do a Stepwise clean uninstallation of iTunes
3c. - Then download and install the Microsoft Installer Cleanup Utility
.....And make sure iTunes is really gone.
4. Delete the contents of your temp folder: C:\Documents and Settings\<username>\Local Settings\Temp
5. Reboot the PC
6. Turn off all security software such as Norton, McAfee, SpySweepers, any TSRs, etc. (exit via the system tray)
7. Start with the QuickTime standalone installer. Download it and save it to your hard drive. Then run it from the PC (not directly from on-line)
8. Reboot the PC
9. Turn off all security software such as Norton, McAfee, SpySweepers, any TSRs, etc. (exit via the system tray)
10. Completely download the latest iTunes Installer. Save it to your PC. Then run it from the saved location of your PC
11. Reboot the PC
12. Open iTunes and enjoy
The majority of problems out there on the discussion boards are caused by viruses or other system corruption — sometimes self-inflicted by the user (i.e. - people who turn off necessary Windows services) — or out of date drivers. You may want to consider this if your PC falls into one of these categories.

When I run itunes diagnostic tests, I am told secure link to itunes store failed. My firewall is not blocking itunes. I have tried to download two itunes products and these have failed to download properly. What do I do?

When I run itunes diagnostic tests, I am told secure link to itunes store failed. My firewall is not blocking itunes. I have tried to download two itunes products and these have failed to download properly. What do I do?

WIndows Vista and 7 uninstall instructions:
http://support.apple.com/kb/HT1923
Windows XP instructions:
http://support.apple.com/kb/HT1925
I would say a removal is necassary! this will not affect the content

After installing any version of itunes. Told failed to install properly and could not burn or import music from Cd's. Also will not allow eithre one of my 2 ipods to sync with it as well.

After installing any version of itunes. Told failed to install properly and could not burn or import music from Cd's. Also will not allow eithre one of my 2 ipods to sync with it as well.

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.)

"The attempt to burn a disc failed. The device failed to respond properly"

Hello everyone,
I have suddenly developed a problem when trying to burn a CD. I get the "Checking playlist" and "Initializing" messages, and then Writing...(the name of the first track)", but about 20 seconds later, just when seems as if it will start burning, the CD is ejected and I get the following message: ""The attempt to burn a disc failed. The device failed to respond properly, unable to recover or retry."
I have browsed the forums here and it seems that many other people have had similar problems. I am running a Powerbook G4, OS X version 10.2.8, iTunes 6.0.5.
I have used several different brands of media, and many slower burning speeds, but nothing helps.
I can still listen to CD's with my computer, just not burn anything.
My computer is about 5 years old. Do you think that this problem is suddenly occurring simply because my optical drive needs to be replaced?
Also, another issue, possibly related, but maybe not, is that, after my burn failed for the first time, I put in a completely different CD to see if it would play. It did, but instead of listing the correct tracks on the CD, it showed the tracks of the previous playlist that had the failed burn.
For example, I imported the tracks from one CD into my Library, then moved them to a playlist. When I tried to burn the contents of that playlist to a CD, I received the "attempt to burn failed" message that I previously described.
Then, I inserted a completely different disc, but iTunes read it as having the same contents of the playlist that had failed to burn, but when I clicked on the track titles, they played from the new CD that I'd inserted, not the failed playlist. So although the titles indicated that I was working with the failed playlist, the media that played was from the new CD.
Any suggestions would be greatly appreciated!
Sarah
Powerbook G4 Mac OS X (10.2.x)
Powerbook G4 Mac OS X (10.2.x)

I'm having a similar problem. In my case, the problem started about two months ago. I regularly update software. Currently I'm at 10.4.10 and iTunes 7.3.2(6).
In my case, I'm trying to backup recent iTunes purchases. I'm unable to burn CDs with the original combo drive (CD) or my internal NEC burner (DVDs). I get a series of coasters. Occasionally .Mac Backup fails as well. Toast 7 works fine. Even stranger, I can burn 1 DVD successfully with an external Pioneer DVD burner (4x) USB 2 using iTunes. (I have a belkin USB 2 card) Multiple DVDs fail. I recently switched to this PowerMac from an iBook and several preference files were copied with my home directory during the transition. The external drive was used with the iBook, but not on this system before which may lend to the preferences file as a possibility.
However, I find it odd that my external drive works and both internal drives are failing. I was suspecting the IDE controller on the logic board, except that Toast works. This logic board is not as old as the computer. It was a replacement in 2005 when an after market ATI card fried and took it and the power supply out. At first I suspected a hardware problem and replaced the IDE cable which looked warn. The NEC drive is about two years old and the combo drive is the original. They are on the same controller.
In my case it is certainly possible the drives or controller are starting to fail. I wonder if anyone else might have an external cd/dvd drive they could test that are having the problem.

All of a sudden some of my sites have stopped working properly on Firefox and I have had to (reluctantly) go back to Internet Explorer to get them to work properly. Why??? Please help because I always prefer Firefox in all internet stuff

The problem sites have always worked properly on Mozilla Firefox until 2 of them stopped giving full access. I reverted to (yuk) Internet Explorer to see if the problem was still there, but, surprisingly I had full access with both programes. I repeated the attempts a couple of times in Firefox but now have to use IE when I require proper access.
Is the problem in a setting somewhere??
Please help because I HATE IE
Thanks & Regards

[https://support.mozilla.org/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache Clear your browser cache].
If needed, delete the site's cookies. <br />
Right-click the page, choose View Page Info > Security > "View Cookies"

Firefox 3.5 was downloaded fine, but when I try to open firefox page, "the application failed to initialize properly" error sign comes up.

I've been using firefox fine until now. But when I launched firefox page today, suddenly "The application failed to initialize properly (0xc000007b). Click on OK to terminate the application." error sign came up. So I downloaded and ran firefox again, and tried lauching, the same error message. Thank you for your help.

Try:
* http://kb.mozillazine.org/Profile_in_use
* https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding

Firefox.exe +application error +the application failed to initialize properly (0x0150004) +click on OK to terminate the application.

Win XP Home SP2
Installed Firefox, but receive the following error message:
firefox.exe +application error +the application failed to initialize properly (0x0150004) +click on OK to terminate the application.
Have uninstalled and reinstalled several times, but same message. Firefox won't even open.

Usually someone has been down the track before and occasionally they post some useful details which may help others to investigate and/or eliminate factors in their particular case.
This AccessibleMarshal.dll error seems to have a long history --- posts from 2006 with early Firefox versions had issues similar to yours.
There is a link and an excerpt below which could be worth checking in your case,
particularly since it mentions the problem would occur on a clean install (no previous instance of Firefox on the system and Windows before Vista --??)
Have a look here:
https://bugzilla.mozilla.org/show_bug.cgi?id=712960
and the post to read:
'''Mark Banner (:standard8) 2011-12-22 12:55:21 PST'''
"Created attachment 583905 [details] [diff] [review]
Add the Win32 redistributable directory to the mozconfigs"
"Somehow we missed shipping the Win32 Redistributables from Visual C++. We didn't detect this as it would only show on Windows versions less than Vista, and you'd probably only see it if you had a completely clean install, and you didn't have the dlls installed elsewhere (as it appears my XP system does)."
"If you're seeing this then you want to copy the following files from a Firefox installation:
Microsoft.VC80.CRT.manifest
msvcm80.dll
msvcp80.dll
msvcr80.dll
The patch I'm attaching updates our configuration files to specify the Win32 redistribution directory, which will then cause the build system to include the files in the build."
.... ends....
The earlier 2006 instances also had the same issue in some cases:
forums.frontmotion.com/viewtopic.php?f=10&t=393
Hope this progresses the search and resolution.
Cheers

Site doesn't display properly when viewed in Windows 8.1 and IE11

Web site doesn't display properly when viewed in Windows 8.1 and IE11. Site html and css validates no errors at W3C. Any ideas?

The following is what I see in IE11 on a Windows 8.1 system, no difference using Firefox, Chrome or Safari on the same system.

Some (not all) sites will not load properly, (such as 'Outlook', MSN, Flicker) they look as if in a ''safe'' mode'' and can't be viewed properly.

Hello! If anyone can help me, I would be very grateful!
I am unable to properly view a number of, but not all, web pages/sites.
I have tried all the recommendations I have found thus far; however, nothing resolved the issue.
I have tried: clearing catch, clearing cookies. Checked ‘’load images automatically’’. Enabled JavaScrip. Adblock is disabled. Flashblock is disabled. Everything I have is up-to-date.
Examples of, but not limited to, sites unable to view properly are: Firefox Support, MSN, Flicker, Outlook email, Yahoo.
They work fine using Explorer.
Further detail/explanation of images not showing where a image/picture should be: What I see is an opaque thin red box and in that box is a small opaque red flag.
THIS IS MOST PERPLEXING!!!

Try, as cor-el said, the extensions one by one, disable one, then enable it if the problem is not there, and disable the next extension.
(your extensions we can see in "system details")
thank you

Site fails to refresh properly

Similar Messages

Maybe you are looking for