Site List doesn't appear to work properly?

I have an MSI application that is set to FORCE CACHE as well as FORCE
RUN
I'm using a MACRO to specify the UNC path for the files (common ->
sources as well as the transforms).
I have two app objects (two copies, really). One in our main site,
another in a remote site.
The GUIDs have been synced
I setup the "site list" as per the docs (pointed "remote site app" to
the "main site app")
I have my Novell Client 4.91 SP2 using IP Address costing =2 (ping
time).
When I login as the "remote" user, it tries to cache the application.
Only 51 minutes remaining (should be 5 minutes as I'm on the "main" site
subnet and the ping should've responded the quickest from here).
Am I doing something wrong?

In article <[email protected]>,
[email protected] says...
> I have an MSI application that is set to FORCE CACHE as well as FORCE
> RUN
>
> I'm using a MACRO to specify the UNC path for the files (common ->
> sources as well as the transforms).
>
> I have two app objects (two copies, really). One in our main site,
> another in a remote site.
>
> The GUIDs have been synced
>
> I setup the "site list" as per the docs (pointed "remote site app" to
> the "main site app")
>
> I have my Novell Client 4.91 SP2 using IP Address costing =2 (ping
> time).
>
> When I login as the "remote" user, it tries to cache the application.
> Only 51 minutes remaining (should be 5 minutes as I'm on the "main" site
> subnet and the ping should've responded the quickest from here).
>
> Am I doing something wrong?
>
I'm doing something wrong. I guess it only works with NON-Cached apps
that are distributed.

Similar Messages

Always on doesn't appear to work properly after downgrade from Standard to Basic

I was running a Standard tier setup for my webapps, with the always on option set to "on" without issue - sites would respond almost immediately even after not having been accessed for more than the 20 minute sleep period of the lower subs.
However, since I downgraded to basic (due to simply not making use of any of the extra features) I've found that my sites seem to take a while to load again after a period of inactivity. I've double checked the always-on option and it is on, and I've also
tried turning it off and on again.
Is this a known issue and does anyone have any suggested solutions?
Thanks, Daniel.

Hi Daniel,
Azure unloads your site if it is idle for the standard 20 minute timeout, which can cause slow responses for the initial site users after it is unloaded. Enabling Always On essentially causes Azure to automatically ping your site periodically to ensure
that it remains in a running state. Always on is not an available option on lower end plans.
However in Basic or Standard mode, you can enable Always On to keep the app loaded all the time.
It is not a known issue, I suppose in theory it could consume more CPU cycles and thus could require the deployment of more infrastructure.
Couple of things you might want to check :
- Increase the Instance count
- Check the Monitor Tab in Azure Website to see how much of CPU, DataIN and Data Out time is taken for a request to the site.
Recommend you to see this thread discussion on  Failed request tracing
for troubleshooting on Slow requests and a video  on
Troubleshooting Slow Requests with Failed Request Tracing that might help troubleshoot the slowness of website.
Regards,
Shirisha Paderu

Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David

The list doesn't appear in the input field

Hi All
The list doesn't appear in the input field when I make input or press the BACKSPACE key.
Notes:
I made this modifications:
1. In connection properties I set High speed connections (LAN)
2. In local data settings I set the historial to ON
we had SAPGUI 620 in workstations and now we have installed SAPGUI 710
Thanks for your time and help
Message was edited by:
        Genner Sanchez

Hello Genner,
see note 399180:
o FIELD NAME LENGTH
   The history is only written for field names with a maximum length
   of 40 characters. In earlier SAP GUI versions, this length was
   restricted to 30 characters. The history file must be deleted to
   achieve extended support.
o FIELD LENGTH
   If the length of the input field is 60 or more characters,
   history is not written either. "Input field length" refers to the
   dictionary length of the field, not to the "visible length" on
   the screen. (The restriction of the input data to 60 characters
   results from the fact that text editors were often built as lists
   of text fields with a length of 60 in the past. In those editors,
   this history was quite annoying. On customer request, this was
Regards, Martin

The VAT ID we have doesn't appear to work

Hello,
I can't enter my VAT number in my Dev Center account.
I keep getting the message 'The VAT ID we have doesn’t appear to work. To update it, go here. Learn more.'.
It's also impossible for me to create a new support ticket.
Dave Claessens

Hello Dave,
If you double checked your VAT ID to make sure that it is valid then please contact
Dev Center Support for assistance with this.
-Miles
Windows and Windows Phone Dev Center Support
Send us your feedback about the Windows Platform

Site definition doesn't appear

Hi all,
I create Site Definition project, after several changes on onet.xml and web*.xml then debugging, suddenly my site template doesn't appear on create site template, does anybody know about this issue?

Hi
Have you deployed the template through Sandbox solution or Farm Solution.
Please check the url onec.
http://praveenbattula.blogspot.in/2010/02/sharepoint-2010-site-templates-not.html
Thanks,
Santanu

PowerShell script doesn't appear to work as scheduled task in sharepoint 2013

PowerShell script doesn't appear to work as scheduled task in sharepoint 2013, it works as normal manual execution
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi,
To run PowerShell Script as scheduled task in SharePoint 2013, you can take the demo below for a try:
http://blogs.technet.com/b/meamcs/archive/2013/02/23/sharepoint-2013-backup-with-powershell-and-task-scheduler-for-beginners.aspx
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Patrick Liang
TechNet Community Support

In my Integration Directory Default Adapters list doesn't Appear.Why?

In my Integration Directory Default Adapters list doesn't Appear.It shows noObjects found.
How to i solve it.
Please clarify asap...
thanks

>>In Repository When i want to import Design Objects it Gives error - No Objects found
Place the tpz file(not the zip file you download from service.sap.com) in the correct path. You can get get the correct import path from your XI home page
XI Home page >Administration>General Inforation-->Import
There will be a value for import. Place the file in this path.
Regards,
Jai Shankar

I just upgraded my Internet service to 12 MPS. It doesn't appear to work any faster than the 3MPS I had before. The AT

I just upgraded my Internet service to 12 MPS. It doesn't appear to work any faster than the 3MPS I had before. The AT&T guy said it may be the computer rather than the connection. I have an iMac intel core 2 duo, running OS 10.5.8. It has 1 GB of memory. I have plenty of memory left. Is there something I can check on the computer to see if it's capable of running faster with this new Internet upgrade?

You certainly are going to see improvements if you download big files, i.e. Apple updates, or watching trailers also at higher resolution.
You won't see much difference if you use peer to peer download.

Pdfmark code in MS Word 2008 doc doesn't seem to work properly to create Named Destination

Hi all,
I've been having trouble with creating Preview-compatible Named Destinations in Acrobat 9.x (see http://forums.adobe.com/thread/770470?tstart=0). Distiller, on the other hand, appears to create compatible Destinations, so as a last-ditch effort, I tried to go back to my original source file (Microsoft Word 2008 document) to use Distiller's pdfmark functionality, to see if maybe I could finally get a PDF with Preview-compatible Destinations.
Following instructions found elsewhere on this forum, I went into Word and inserted the following field into a test location in my document:
PRINT "[ /Dest /testdest /View [ /XYZ null null null ] /DEST pdfmark"
This field code is supposed to then cause a pdfmark to be inserted into the resulting PostScript and/or PDF files. Distiller is supposed to understand this and turn it into a Named Destination called "testdest." However, it doesn't seem to work - I don't see the pdfmark code in the PS file, and the PDF file doesn't have any Named Destinations in it.
I'm using Acrobat 9.x on Mac OS X 10.6.5, so I tried this two different ways:
1) Using the "Print to Adobe PDF" workflow (which replaced the "Adobe PDF Printer" from previous OS/Acrobat versions) - this automatically generates a PDF via (presumably) an API call to Distiller... and
2) Using the "Print to Postscript" workflow to generate a PS file, which I then ran through Adobe Distiller.
In neither case did I end up with a named destination in the PDF file, as I was supposed to. In case #2, even the Postscript file didn't have a pdfmark embedded in it. Thus, I'm assuming that perhaps this is particular issue may be a problem with MS Word 2008 rather than with Acrobat... but I'm hoping someone might have a clue as to how to fix it.
I welcome ideas on how to get Word 2008 to properly output pdfmark code, so that Distiller will pick it up and properly embed a Named Destination into the PDF...
Thanks in advance.
(If anyone has ideas about the Preview-compatible problem, linked above, that would also be great!)

You're suggesting that it was never fixed from Word 2004 to 2008? Possibly. I wonder if it's fixed in Word 2011? Anyone know? But is it really a Word problem, rather than a Distiller issue?
I appreciate your offer, though I do have access to Word on Windows (2003, I think), so I could try Distilling there... I only worry about formatting, since there are minor differences (e.g. font kerning, etc.) between Mac and Windows that are subtle, but sufficient to create formatting issues for very long documents (e.g. pushing figures onto the wrong pages, etc.). That would be a rather big problem.
The question remains whether this is an issue with Word or Distiller, though... and whether it's fixed in Distiller X and/or Word 2011.
Adobe, care to comment?
I'd really love to find a proper Mac solution, if one exists... it would be rather a slap to Mac users if a solution doesn't exist.

IMR Doesn't Appear to Work

All,
          One machine running netscape and proxy. All requests are forwarded to
          the cluster. Two machines, one WL instance per. WL 510 SP4. All URLs
          go through NS/proxy.
          I can see the proxy round-robin the requests to the cluster, but IMR
          doesn't appear to be working. I've set the following cluster props:
          weblogic.httpd.clustering.enable=true
          weblogic.httpd.session.persistence=true
          weblogic.httpd.session.persistentStoreType=replicated
          When a user logs in on the first server, a session is created. The
          next request seems to be proxied to the second server and, since the
          session doesn't exist on the second server, my application returns a
          UserNotAuthenticatedException. If IMR was working it seems the
          original log in request that caused the session to be created would be
          replicated to the secondary server, but it's apparently not working.
          I'm obviously missing something. I'm suspicious of the NS/proxy config
          for some reason, but I haven't verified that setup yet. Any ideas are
          appreciated. Thanks!
          Jason


Jason,
          This is a doc bug.
          I will ask our docs team to correct it.
          Currently all WLS's in a cluster should be listening on the same port
          number.
          We are planning to add this feature in the next major release.
          i.e. WLS's can listen on different ports in a cluster.
          Kumar
          Jason Jonas wrote:
          > After reading the documentation, I'm confused...
          >
          > In a WL cluster all instances must listen on the same port. But in the
          > NSAPI-plugin documentation one example from the obj.conf file is:
          >
          > <Object name="si" ppath="*/servletimages/*">
          > Service fn=wl-proxy WebLogicCluster="myweblogic.com:7001,
          > yourweblogic.com:6999,theirweblogic.com:6001"
          > </Object>
          >
          > What's up? Are we supposed to list all servers in the cluster in the
          > above prop? If so, why are the ports different in the above example?
          > If not, do we just list a single member of the cluster and rely on the
          > plug-in to dynamically determine the other instances in cluster to
          > route to?
          >
          > Jason
          >
          > On Wed, 09 Aug 2000 23:16:05 GMT,
          > [email protected] (Jason Jonas) wrote:
          >
          > >All,
          > >
          > >One machine running netscape and proxy. All requests are forwarded to
          > >the cluster. Two machines, one WL instance per. WL 510 SP4. All URLs
          > >go through NS/proxy.
          > >
          > >I can see the proxy round-robin the requests to the cluster, but IMR
          > >doesn't appear to be working. I've set the following cluster props:
          > >
          > >weblogic.httpd.clustering.enable=true
          > >weblogic.httpd.session.persistence=true
          > >weblogic.httpd.session.persistentStoreType=replicated
          > >
          > >When a user logs in on the first server, a session is created. The
          > >next request seems to be proxied to the second server and, since the
          > >session doesn't exist on the second server, my application returns a
          > >UserNotAuthenticatedException. If IMR was working it seems the
          > >original log in request that caused the session to be created would be
          > >replicated to the secondary server, but it's apparently not working.
          > >
          > >I'm obviously missing something. I'm suspicious of the NS/proxy config
          > >for some reason, but I haven't verified that setup yet. Any ideas are
          > >appreciated. Thanks!
          > >
          > >Jason

SunOneDS-5.2 bind authmethod=ssl doesn't appear to work

Having set up DS-5.2 with SSL + allow user authentication + user entry with (binary) certificate + certmap.conf setup for user cert CA cert + ACI entry with bind rule set to
allow (all) (userdn = ....) and (authmethod="ssl")
client connections ARE authenticated by client certificate when passed.
However, if the client binds with bindDN=userdn in ACI, but NOT using either a certificate nor SSL connection, the associated search request is still allowed. In other words, it appears that the "authmethod=ssl" bind rule HAS NO AFFECT!? Other ACI's on the entry deny anonymous access and allow other groups without SSL.
The SunOneDS-5.2 Administration Guide states for authmethod="ssl",
SSL - The client must bind to the directory over a Secure Sockets
Layer (SSL) or Transport Layer Security (TLS) connection
but this doesn't appear to be working in forcing an SSL bind/connection.
It is also interesting to note that the client certificate is offered at the LDAP connection step and not at the LDAP bind step and that a subsequent bind appears to be necessary to properly affect a subsequent search. That is, with the above ACI bind rule, connect with certificate over SSL but bind as annonymous and the search fails. ANY connection with proper bindDN and bindPW satisfies the ACI and the search succeeds.
The intention is to FORCE SSL connections for certain subtrees where the LDAP server ALSO allows NON-SSL connections for OTHER subtrees. A secondary desire is to allow SSL + certificate authentication to provide the forced SSL connection and user binding without requiring a subsequent bindDN and bindPW.
An example of SSL + certificate connection + full user binding is:
conn=30 op=-1 msgId=-1 - SSL 128-bit RC4; client 0.9.2342.19200300.100.1.4=Personal/User SSL Certificate, CN=......., OU=......, O=...., L=...., ST=...., C=..; issuer 0.9.2342.19200300.100.1.4=localnet10 SSL only CA Certificate, CN=SSLonlyCA, OU=......., O=..., L=...., ST=..., C=..
conn=30 op=-1 msgId=-1 - SSL client bound as uid=NEngineer1,ou=People,o=..,c=..
conn=30 op=0 msgId=1 - BIND dn="uid=NEngineer1,ou=People,o=..,c=.." method=128 version=3
conn=30 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=nengineer1,ou=people,o=..,c=.."
conn=30 op=1 msgId=2 - SRCH base="o=..,c=.." scope=2 filter="(dc=.............)" attrs="dn ........."
conn=30 op=1 msgId=2 - RESULT err=0 tag=101 nentries=1 etime=

Corrected - what was needed was a bind rule, boolean change from "and" to "or":
(targetattr = "*") (version 3.0;acl "DENY all but Network Administrators access";deny (all)(groupdn != "ldap:///cn=Network Administrators,ou=Groups,o=xx,c=xx")or(authmethod!="ssl");)

HT204053 I have a just purchased my first iPod touch and i cannot transfer my music from my laptop to the iPod. The sync button doesn't appear to work. What am i doing wrong? Please help this frustrated Grandma. I am trying to keep up with technology!

I have just purchased my first iPod touch and I cannot transfer my music from my laptop. The sync button does not appear to work. What have I done wrong? I am a grandma trying to keep up with technology please help.

Connect it to your computer and restore it as a new device. Then chose what music you want to sync with it and do so just like your Touch does.

Iphoe 3g power switch doesn't appear to work

I have an older 3g. The power switch doesn't seem to work, so I can't turn it off. Nor can I re-boot it.
Neither holding the power switch nor the home and power switches together seem to have any effect.
Any ideas what to do next?
Thanks

Thanks for this. I tried it but it didn't work . I guess it's off to the menders.

Any page loads but the site content doesn't appear on main screen, only on tabs list.

I got an ARMv6 - Galaxy Spica (GT-I5700) mobile, with Android 2.3.7 on it. When I try to access any webpage its content, after loaded, is blank. Although I do visualise the site content on Tabs list or Top sites (first page) .
It happens even on Beta, Aurora or Nightly builds.
I did try to clean all data, but hasn't change anything.

bugzilla.mozilla.org

Site List doesn't appear to work properly?

Similar Messages

Maybe you are looking for