Site manager in CS3 deleted all sites
I am currently working in dreamweaver cs3 for the mac on
Leopard. Today the software decided to delete all of my sites in
site manager. I don't know ow but it did. I still have several of
the sites in Dreamweaver 8. Is there a way to export the
information into the latest version? If so, please advise.
Thank you
MS
mnnstvik3 wrote:
> I still have several of the sites in Dreamweaver 8. Is
there a way to
> export the information into the latest version? If so,
please advise.
Site > Manage Sites. Select the first site, shift-click
the last site to
select them all, and click Export. This creates .ste files
that you can
then import into CS3, using the Import button in the Site
Management
dialog box.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/
Similar Messages
-
ITunes Podcast Site Manager vs. iTunes U Public Site Manager
The link for help files for the iTunes Podcast Site Manager goes to "Using iTunes U Public Site Manager". There are significant differences between these two iTunes administration sites. I need help for iTunes Podcast Site Manager, not iTunes U Public Site Manager.
Specifically I need to set media types for our shows, and since a change to the iTunes Podcast Site Manager interface, I've not figured out how to do it. The instructions (from "Using iTunes U Public Site Manager") say you do it on the Collections tab. There is no "Collections" tab at the iTunes Podcast Site Manager.
Anyone know how I set media types in the iTunes Podcast Site Manager?
thanks - johnI'm afraid I don't know anything about this: it doesn't appear to be relevant to ordinary podcasts. Is this an iTunes-U matter? - perhaps that forum would help.
https://discussions.apple.com/community/itunes_u/managing_itunes_u_sites -
Aargh - DW deleted all site definitions
Hi there
I've just installed DW8 without any problems - the whole
process was smooth
and all site definitions were ported across.
I then (as instructed) went on to delete DWMX2004 and 'bang'
suddenly all my
site definitions are gone from DW8 and I'm back to square one
I did do a backup of the DW MX2004 site profiles etc using
the MM-Exporter
tool (just in case) but trying to use this to recreate in DW8
doesn't work
as it says there are loads of files missing which it needs (I
guess from the
DW MX 2004 installation)
Can anyone shed any words of wisdom before I have to go
through and
reconfigure 60 or 70 site definitions?
Thanks
Jos> I did do a backup of the DW MX2004 site profiles etc
using the MM-Exporter
> tool (just in case) but trying to use this to recreate
in DW8 doesn't work
> as it says there are loads of files missing which it
needs (I guess from
> the DW MX 2004 installation)
What? The exporter works with DMX2004 to DW8. What kind of
errors did you
get? To tell you the truth, I haven't used it since DW began
doing exports
of multiple sites, which works just fine.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Jos Medinger" <[email protected]> wrote in
message
news:el8u2q$kpt$[email protected]..
> Hi there
>
> I've just installed DW8 without any problems - the whole
process was
> smooth and all site definitions were ported across.
>
> I then (as instructed) went on to delete DWMX2004 and
'bang' suddenly all
> my site definitions are gone from DW8 and I'm back to
square one :(
>
> I did do a backup of the DW MX2004 site profiles etc
using the MM-Exporter
> tool (just in case) but trying to use this to recreate
in DW8 doesn't work
> as it says there are loads of files missing which it
needs (I guess from
> the DW MX 2004 installation)
>
> Can anyone shed any words of wisdom before I have to go
through and
> reconfigure 60 or 70 site definitions?
>
> Thanks
>
> Jos
> -
While searching to site google box shows old sites ,how can i delete those sites.
how can i delete the pop up sites on Google search box.
I'm sorry I don't have an answer to your problem, but I wrote to them also to get back the old Firefox, where Google was there. I lost one of my toolbars with certain
bookmarks, this is a major headache. If you get any info. I would like it if you could let me know and I will do the same. [email protected] -
as well i open firefox , its open normally with no home page , but when i type any of the site it always show a blank page and loading circle is also round once (only one round) as before i didint face this problem because always loading circe round many times till page not open but now it round only once and page remain blank.
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls -
please help how can i set up old phone with new itunes account
with newer itunes version to get the devices sidebar one needs to go into the view menu and click show sidebar
-
Exporting site info from CS3 to CS4
How do I export my "remote info" under "manage sites" from CS3 to CS4? I have about 30 sites under "manage sites" and would hate to have to dig up all the passwords after the upgrade. I used the "export" button in CS3, but it didn't bring in the remote info.
1. In CS3, open Site Manager
2. Select the sites you want to Export
3. Click Export and select a KNOWN location into which to write the *.ste files
4. Open CS4.
5. Open Site Manager
6. Click IMPORT, browse to and select the site files you just exported and click OK.
Such fundamental questions as this are always answered in DW's F1 Help. You'd have been done an hour ago if you had looked there. -
I have no idea how this happened. I opened Dreamweaver CS3
and all sites I had in the site manager are gone. Is there any way
to get them back. Where are those files stored on a Mac? They
should be on a backup disk.Make sure you export them this time! 8(
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Jens Peermann" <[email protected]> wrote in
message
news:gqbd6d$5id$[email protected]..
>
quote:
Originally posted by:
Newsgroup User
> Do you export your site definitions to a safe location?
I bet you will do
> so now. As far as I know they are gone. How many were
there?
>
>
>
> Thanks!
>
> There were 32 sites. I'll be back in - uuhh - let's say,
July?
>
> -
When I pull up the Term store in CA or any MySite collection, it works.
When I do so in any other site collection (HNSCs, incidentally), It doesn't return any term stores.
My ULS log immediately before and after the "/_vti_bin/taxonomyinternalservice.json/CheckPermission" POST on termstore .aspx triggers the WCF call:
Claims Authentication af30y Verbose Claims Windows Sign-In: Successfully signed-in the the user 'contoso\domainUser' for request url 'https://sp13-root-prd.contoso.com/_vti_bin/taxonomyinternalservice.json/CheckPermission'.
Claims Authentication af30q Verbose Updating header 'LOGON_USER' with value '0#.w|contoso\domainUser' for the request url 'https://sp13-root-prd.contoso.com/_vti_bin/taxonomyinternalservice.json/CheckPermission'.
Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|contoso\domainUser, ClaimsCount=77
Logging Correlation Data xmnv Medium Site=/
Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://CONTOSOFE3:32843/00e6d55691824965ac223f1d1cfae6d2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges2' MessageId: 'urn:uuid:590e916c-c89a-4f89-9819-a82c97fabcaa'
Claims Authentication bz7l Medium SPSecurityContext: Could not retrieve a valid windows identity for username 'contoso\domainUser' with UPN '[email protected]'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: WTS0003: The caller is not authorized to access the service. (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.UnauthorizedAccessException: WTS0003: The caller is not authorized to access the service. at Microsoft.IdentityModel.WindowsTokenService.CallerSecurity.CheckCaller(WindowsIdentity callerIdentity) at Microsoft.IdentityModel.WindowsTokenService.S4UServiceContract.PerformLogon(Func`1 logonOperation, Int32 pid) at SyncInvokeUpnLogon(Object , Object[] , Object[] ) at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc) at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet))..
Claims Authentication g220 Unexpected No windows identity for contoso\domainUser.
The "The caller is not authorized to access the service." message seems pertinent.
Both web apps are using only NTLM auth.
The url for both web apps ends in the same contoso.com domain.
I get the same errors no matter what account I use, including the install account.
Things I've tried:
Deleting and building a new HNSC root web app and site. Error happens in all sites in all web apps except the PBSC hosting MySites.
Giving the root site app pool identity full control of the metadata service app (even though the MySite identitiy doesn't have it)
Giving the root site app pool identity full permissions on the metadata service app.
Comparing database and web app config permissions between dev (where everything works perfectly) and prod (where it does not).
Made sure IIS auth settings on both sites are identical
Both sites are using the same SSL certificate (though the call to the web service appears to be http)
Reprovisioned the metadata service app with a new database and new app pool identity.
Made sure C2WT is running. Tried it with the service stopped as well.
Web.configs are identical between working and non-working apps.
I'm stumped but still Googling. I'm hoping to avoid having to call Micrososft. Any help would be appreciated!
UPDATE:
Interestingly, when I restored the web application from backup (via CA), I ended up with 3 identical "Windows Authentication" authentication providers assigned to the problem web app. Since there was more than one, I was directed to the provider-chooser
page when visiting the site. Upon choosing 1 of the 3, I was authenticated, and *poof*, no more authentication errors and the term store loaded term sets as expected.
Of course, 3 providers was not an ideal state, so I grabbed the one that worked (#1) via get-spauthenticationprovider, and assigned it to the web app via set-spwebapplication, and my problem returned.
I am currently updating the farm to SP1 from June 2013 CU. Fingers crossed.
Update:
The update to SP1 went smoothly, but did not resolve the issue. Also related (I believe) are the random authentication errors when trying to upload images to some libraries, and 401-errors on the accessdenied.aspx page itself.
Update:
The problem is resolved, seemingly after making 4 changes. I'm trying to narrow down which change was the cure, if any:
I installed SP1 on all 6 servers, rebooted and upgraded. This appeared to have no effect.
Removed an old login from SQL that no longer existed in AD because of this ULS error:
System.Runtime.InteropServices.COMException: The user or group contoso\svc_xxxxxxxxx' is unknown., StackTrace: at Microsoft.SharePoint.Utilities.SPUtility.GetFullNameFromLoginEx(String loginName, Boolean&
bIsDL)
This login was the identity of the application pool that used to run the web app in question.
This login was the schema owner of a schema named after itself on every SharePoint database so I changed the schema owner to dbo but left the schema attached.
The problem may have surfaced initially when the app pool identity was changed in CA, but went unnoticed?
Note that the web app had been deleted and recreated many times with a new identity and pool to no avail, but the URL remained the same throughout each attempted fix. Relevant?
Grasping at straws, I changed the app pool identity for this web app to the same one that runs the MySite web app pool as per this only slightly related problem: http://www.planetsharepoint.org/m/preview.php?id=372&rid=34764&author=Vlad+Catrinescu
I changed the authentication method from NTLM to Negotiate.
I am rolling back #3 and #4 to see if the issue resurfaces.
Update:
It doesn't appear to have been the NTLM/Negotiate setting. Web app is currently set to NTLM and all is well. No strange accessdenies, and term Store is still manageable from all sites.
Update: Sorry for the delay. I am administering 6 farms these days. Will update as soon as the final phase of rollbacks happens.
I think I can. I think I can.maybe that web app was accidentally created with classic auth?
here's an example of how to create claims based, with classic, and then "doing 2013" claims
#Create the example web application, as mentioned above, either with gui, and pick later, or
New-SPWebApplication-ApplicationPool$applicationPool-ApplicationPoolAccount$serviceAcct-Name$WebApp-Port
5050
-databaseName$contentDB-securesocketslayer
#If doing for 2013
New-SPWebApplication-ApplicationPool$applicationPool-ApplicationPoolAccount$serviceAcct-Name$WebApp-Port
5050
-AuthenticationProvider(new-spauthenticationprovider)
-databaseName$contentDB-secureSocketsLayer -
Business Catalyst Site Manager Only Showing Web Forms
I am having a horrible time trying to just apply and setup a template in business catalyst. I have gotten to the point where you add the HTML {tag_pagecontent} into a page in muse. Now I went to my admin panel and went to the site manager drop down. All it shows is web forms and system emails! Isn't there supposed to be buttons for templates etc?! I hope someone has the answers, btw I am using a trial site currently but that shouldn't make a difference right? Thanks in advance.
I figured it out, I had to click on my name in the right corner within the BC admin. Then click on my details and scroll down and check box the "enable web editing" and save. That made all site manager options available.
-
I have a web application that has a number of project based site collections under it.
I want people to be able to search within the site, but want to ensure that users can't get results from other sites. Is there any way to hide the "All Sites" scope and just leave the contextual scope there?Hi,
If you would like to remove "All sites" scope in search center, you could go to site settings > site scopes > display groups > remove All sites from
search dropdown and advanced group.
http://www.sharepointusecases.com/2008/11/configuring-scopes-dropdown/
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Custom link to Delete All Revisions
I was wondering which service needs to be called from a Site Studio page to delete all the revision of a particular document.
DELETE_REV deletes the latest revision of the document only, but is it possible to delete all the revisions in a sinlge click ?Use DELETE_DOC instead. See this link for details: http://docs.oracle.com/cd/E21764_01/doc.1111/e11011/c05_core.htm#autoId66
-
No sound in youtube while video plays.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
Delete All Site Data and Settings
then click Delete Data. Close the preference pane. Test. -
Deleted all music in itunes upgrading to 7.0.6.29; how do i get it back?
i recently ugraded itunes 7.0.6.29 and managed to (accidently) delete all music in itunes. i am now having to go into all my music, folder by folder, to import the files back into itunes. 3500 done, 5000 to go. AArrrgh. any ideas how to do it faster? i would like to get the playlists back that i ahve on my ipod but i dare not try to sync it in case it wipes the ipod as well. this idiot would appreciate any help he can get.
If your iPod is set to update automatically you just need to take care connecting to a changed iTunes. You can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows with iTunes 7.3 or later installed hold down the Shift + Ctrl keys together. This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer: iTunes - Keyboard Shortcuts for Windows
When your iPod appears in the iTunes source list change the update setting to manual, that way you can continue to use your iPod without the risk of accidentally erasing it until you can restore your songs and playlists: Managing content manually on iPod
There are a number of third party utilities that you can use to retrieve the music files and clone playlists from your iPod. Have a look at this one for instance: iPod Access Mac & Windows (iPhone and iPod Touch compatible)
You can read reviews and comparisons of more of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers -
Dreamweaver has deleted all my sites in the 'manage site' box! any reason why?
Strangely enough, dreamweavers 'manage site' box has deleted all my sites - both local and server info totally wiped out. I have to reinstall my sites and their following details for the sites to be reconnected again! I never seem to have this problem with fixed software, just wondering as its on cloud whether there is any outside influence
Cloud software is exactly the same as perpetual licensed software. The only difference is how you pay for it. When your site definition settings go haywire, it's often caused by a corrupted cache or personal configuration folder.
Deleting Corrupted Cache in DW
http://forums.adobe.com/thread/494811
Maybe you are looking for
-
What can I do to add animated gif to my Button
hi everybody, I have a JButton, which is used as a 'search button'. I want my search button to show an animated globe gif when search is going on. I have my code as below. JButton searchButton = new JButton(MyUtilities.searchIcon()); ImageIcon animat
-
Fixing entry already exists . Error in creation of fixed pegging
Hi, we are calling CTP from GATP after product availability check. Using fixed pegging relationship through standarad abap class error message is coming as Error occurred during creation of fixed pegging relationships Fixing entry already exists Mess
-
The latest iTunes couldn't enter itunes store & itunes match
It just not show anything at the itunes store & itunes match page!!! The latest safari is also not show anything!!
-
How to Deploying Application Which consists .jpr project file in JDeveloper
Hi, I Successfully compiled my application in JDeveloper 11g, My Project consists of .jpr file which loads all the source files. I added this .jpr file to New Application by creating a .jws in JDeveloper. When I run my application, I am getting the D
-
Reader fails to open mail attachment when filename contains non-us characters
Tested reader with 2 identical pdf attachments in email (same pdf, different filename). If filename contains, in this case, scandinavian characters like ä or ö (auml or ouml), reader flags error "The file path is not valid". This is a serious error,