Site not getting created in SharePoint 2013.
Hi,
I am trying to create site in 2013. while creating site, it is taking long time and after some time tried refresh the page, it shows site created. But when i click on created site, it shows empty page. i am not getting errors or event logs. what will be
the error. Could some one please help me in creating site with working fine.
Thanks,
Badri.
Badri
Hi,
According to your post, my understanding is that you get a blank page when you create a new site.
To narrow down the issue scope, I recommend that you can try to test the following things.
1. What’s the type of this site you created in this site collectionCreate a new different types site in this site collections to check if this issue is occurred on the only site collection in this web application.
Create a new site collection in another web application to check if this issue is occurred on the only web application.
Create a new web application, create a new site collection in this new web application to test if it works.
If you are then the odds are that something went wrong during the provisioning of the original web application.
And, you can add your URL for this site to “trusted sites” in IE.
http://sharepoint.stackexchange.com/questions/60957/external-access-gives-a-blank-home-page
2. Do you use the administrator account to login the site?
You can use the administrator account to login the site, then check the permission of your account.
Maybe your account has no permission to access the site, you can assign it Full Control permission, then check whether it works.
http://stackoverflow.com/questions/4742175/new-site-collection-is-empty-sharepoint-2010
3. Go to the IIS and select the respective web application. Here, I have selected the web application to which the site collection belongs to.
Double click the Authentication icon.
Set the status of ‘Basic Authentication’ from “Disabled” to “Enabled”.
http://adicodes.com/fix-error-empty-pages-when-new-site-collection-is-created/
http://sensoft2000-sharepoint.blogspot.com/2010/06/getting-blank-page-instead-of-central.html
4. Control Panel > Programs and Features > Turn Windows features on or off >Internet Information Services > World Wide Web Services > Security >tick ‘Windows Authentication’, do an IISReset for good measure.
To be more specific, check the authentication settings for SharePoint Central Administration website in IIS. Make sure that you have Windows Authentication enabled and Anonymous Authentication disabled.
http://blog.vinewave.com/2012/01/04/solved-sharepoint-returning-a-blank-page/
http://blogs.objectsharp.com/post/2010/01/04/Blank-page-instead-of-the-SharePoint-Central-Administration-site.aspx
5. Run the following power shell command to disable the LoopbackCheck.
New-ItemProperty HKLM:\System\CurrentControlSet\Control\Lsa -Name "DisableLoopbackCheck" -value "1" -PropertyType dword
You may have to restart the servers and will have run this from all of your SharePoint servers.
You can also navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa in registry and create the dword32 for DisableLoopbackCheck, modify the value to 1.
https://social.technet.microsoft.com/Forums/en-US/7d311288-e14d-4fa8-be02-da524cb4c0ea/sharepoint-site-returns-a-blank-page?forum=sharepointadmin
If the issue persists, please check the ULS log file to find more information about this issue.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Best Regards,
Yumi Fu
Similar Messages
-
Files are not getting updated in sharepoint 2013 because of office upload center error
Dear Team,
I am getting upload failed/upload error in Office Upload Center.
Scenario: I opened excel(version is 2013) file from sharepoint 2013 application and closed and after updating. Later when I opened the file I got error like "UPLOAD FAILED We are sorry this didn't work. Try saving again later and if that still doesn't
work, click save a copy."
I found the error is because file is getting upload failed / upload error in microsoft office upload center2013.
Please let me know if anyone know the solution for my issues
Thanks in Advance
GirishHi Girishkg,
The default IIS limit for the upload file size is 30MB. If the selected files are larger than 30MB, the files are not uploaded.
The limit can be set in web application’s web.config file or in IIS .
There are two detailed articles about setting the limit:
http://www.brainlitter.com/2009/07/13/sharepointcannot-upload-documents-larger-than-30mb-on-windows-server-2008-or-sbs-2008-application-servers/
http://expectedexception.wordpress.com/2011/02/08/upload-multiple-files-fail-without-error/
Feel free to reply if the issue still exists.
Best regards
Wendy Li
TechNet Community Support -
If I create a template on SharePoint 2013 Foundation, then create a site on SharePoint Enterprise (or Office/365) fully configured to support SharePoint 2013 workflows. When I access the site through SharePoint Designer 2013, and attempt to create a workflow
SharePoint 2013 Workflows are not available -- you get message that SharePoint 2013 Workflow platform is not available because it is not configured on the server. This appears to be a bug in SharePoint Designer as the 2013 Workflows are available on the team
site on the same site collection. There is no reason that a site created from a SharePoint 2013 foundation template should have this restriction. To make matters worse if you then save that site as a template on the SharePoint 2013 Enterprise (or
Office/365) system and create a new site from the that template you get the same issue.
Anyone know a workaround/fix to this issue. Have imported the template into Visual Studio but I can not find any way in Visual Studio to enable SharePoint 2013 workflows. A solution that involves Visual Studio import would work fine
for me.
EarllibbyApparently you did not read my question very carefully. The workflow manager is configured properly on this server and for the basic Team site in this site collection the full SharePoint 2013 workflows are available in SharePoint Designer 2013.
BUT they are not available on another site in the SAME SITE COLLECTION that was created from a solution template that was created on a SharePoint Foundation server.
Earllibby -
Hi All,
I need help in migrating a SharePoint 2010 BI PerformancePoint site to a newly built SharePoint 2013 site on another server. The SharePoint 2010 BI Performance Point site has mainly Analytic graphs and charts that work perfectly within the SP 2010 environment
but do not work within the SP 2013 environment. When I open the graphs and charts within Dashboard Designer I get a ‘cannot access the data source’ error message. The problem I am having is there is no way I can edit the graphs and charts to use a newly created
data source on the SP 2013 site.
I hope you can help
ColinJust been going through all this with a client.
Make sure that you either migrate the Secure Store using the Database Attach method (You'll need the farm passphrase to do this), or ensure that you recreate any Secure Store groups required for users to access the data sources.
If you're not using the Secure Store for access to the data, try monitoring the SQL logs on the target data stores and looking for login failures. The PerformancePoint service account(Or the excel unattended account) may required access to the
data store.
Also, if you're using PowerPivot, be aware that your Excel files will need to be created in Excel 2013 with the PowerPivot 2013 add-in in order for manual refresh (Or refresh on open) to work.
Paul.
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times. -
Can I label a Power View sheet created in SharePoint 2013?
Hi,
Is this possible to label a Power View sheet created in SharePoint 2013 and have it shown on the preview snapshots?
This is because in the PowerPivot Gallery in SharePoint 2013 has a really nice display of previews with Excel workbook that includes a label on top of the preview for each worksheet in the workbook.
Thanks,
JaneP.S. if this is still not making sense create a power view report in SharePoint from a SSAS cube. Save that power view report in SharePoint. The power view report should
have a couple of measures and 1 or 2 dimension. Open the report just to confirm it is saved correctly. Now go to SSAS and rename 1 of the measures or dimensions that you used, Save and rebuild your olap . If it’s a calculated measure
you just need to save olap. Now open your power view report and notice that that measure/dimension you changed is no longer in the report.
IN one hand it is great that reports do not error and break; however, on the other hand the users might not know what measure/dimension changed and then be lost/mad because the report no longer
works like they want. In my opinion it would have been better if the power view broke with an error message that it cannot load because measure x does not exist than to just load fine.
In any case I need a method to know when a dimension/measure is modified what reports are using it. Another example is this could even be a case where the dimension values are getting
modified and we need to potentially make a update to any power view/pivot using this dimension as a filter?
Ken Craig -
Custom Site MailBox for Office 365 SharePoint 2013 online
Is it possible to create programmatically create site mailbox for Office 365 SharePoint 2013 online?
How to customize site mailbox email address like [email protected]Hi,
In SharePoint 2013 Online, if you want to sync document library with local drive, you can use OneDrive to achieve it.
http://office.microsoft.com/en-001/support/sync-onedrive-for-business-or-sharepoint-site-libraries-to-your-computer-HA102832401.aspx
Best Regards
Dennis Guo
TechNet Community Support -
Help Pls Table is not getting created
Hi,
DECLARE
CURSOR c
IS
SELECT * FROM emp;
v_count NUMBER;
BEGIN
BEGIN
SELECT COUNT (*)
INTO V_COUNT
FROM all_tables
WHERE table_name = 'EMP_BKP';
IF V_COUNT = 0
THEN
EXECUTE IMMEDIATE 'CREATE TABLE EMP_BKP AS SELECT * FROM EMP';
ELSE
DBMS_OUTPUT.put_line ('Table already created');
END IF;
END;
BEGIN
FOR i IN c
LOOP
INSERT INTO EMP_BKP
SELECT *
FROM EMP
WHERE empno = i.empno;
END LOOP;
END;
END;
Error report:
ORA-06550: line 15, column 13:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 15, column 1:
PL/SQL: SQL Statement ignored
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action:i don't understand why table is not getting created
Edited by: 924575 on Apr 23, 2013 12:35 PMFrank Kulash wrote:
Hi,
924575 wrote:
Hi,
DECLARE
CURSOR c
IS
SELECT * FROM emp;
v_count NUMBER;
BEGIN
BEGIN
SELECT COUNT (*)
INTO V_COUNT
FROM all_tables
WHERE table_name = 'EMP_BKP';
You probaly want to check <b>USER</b>tables, not <b>ALL</b>tables.
IF V_COUNT = 0
THEN
EXECUTE IMMEDIATE 'CREATE TABLE EMP_TEST AS SELECT * FROM EMP';Is this right: you want to create a table called emp_<b>TEST</b>, but only a table called emp_<b>BKP</b> does not already exst?
ELSE
DBMS_OUTPUT.put_line ('Table already created');
END IF;
END;
BEGIN
FOR i IN c
LOOP
INSERT INTO EMP_BKP
SELECT *
FROM EMP
WHERE empno = i.empno;
END LOOP;
END;
END;
Error report:
ORA-06550: line 15, column 13:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 15, column 1:
PL/SQL: SQL Statement ignored
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action:i don't understand why table is not getting createdWhat are you trying to do?
Creating tables in PL/SQL is rarely a good idea.
What can't you create the table, once for all, and TRUNCATE or DELETE the rows when necessary?Frank ,
thank you so much for ur reply.
Even user_tables also not working .i modifed as EMP_BKP that also not working.
Yea. i agree. but requirement is i want to create dynamically. if same table already exists no need to create table.
modified code is
DECLARE
CURSOR c
IS
SELECT * FROM emp;
v_count NUMBER;
BEGIN
BEGIN
SELECT COUNT (*)
INTO V_COUNT
FROM user_tables
WHERE table_name = 'EMP_BKP';
IF V_COUNT = 0
THEN
EXECUTE IMMEDIATE 'CREATE TABLE EMP_BKP AS SELECT * FROM EMP';
ELSE
DBMS_OUTPUT.put_line ('Table already created');
END IF;
END;
BEGIN
FOR i IN c
LOOP
INSERT INTO EMP_BKP
SELECT *
FROM EMP
WHERE empno = i.empno;
END LOOP;
END;
END;
ORA-06550: line 24, column 22:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 24, column 10:
PL/SQL: SQL Statement ignored
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action: -
Excise invoice should not get created without PGI
Hi,
I have a scenario where the billing document is being generated by the customer without PGI after creation of outbound delivery for exports. (This is as per customer's requirement - Copy control maintained in VTFL for the same - copying requirements 11 )
This creates a situation - excise invoice can be created without PGI - which creates problems for customer. This should not happen.
Customer wants a check during the excise invoice creation - excise invoice should not get created if PGI has not been done.
Kindly advise as to how this can be done.
Regards,
T SaravananDear Saravanan
Two options are there
- in your existing routine itself, you can specify the control in such a way that unless the preceding document is PGId
- apply excise user exits like J_1I7_USEREXIT_EXCISE_BEF_SAVE to achieve the requirement.
thanks
G. Lakshmipathi -
Invoice is not getting created in Order related billing
Dear all,
I am trying to do a Order related billing. After creating the order i am going to VF01 and selecting the billing type i have created and trying to create the invoice. I am getting the error "No billing documents were generated. See log" when i am checking the Log its showing now errors.
In case if my account determination procedure is wrong, system should allow me to create a Sales invoice and accounting document will not be generated. But in this case even the sales invoice is also not getting created.
Please suggest me if there are any configuration changes i need to do to overcome this problem.Apart from the suggestion already given, also ensure that
the order is not showing in incomplete log
the order is not blocked for credit limit
You can also cross check in VF04 whether system is fetching that sale order. For information, once you execute VF04, by default, system will check only "Delivery related" check box. You have to manually select "Order related" check box.
G. Lakshmipathi -
File not getting created in a different server
My requirement.
I have written a code in the BI system and now need to write an empty file (say a.done)in a directory /interfaces of PI system.
I wrote using open data set and close data set however the file (a.done) is not getting created in the PI system even though the directory /interfaces exist.
When I give any directory of that of BI system ,the file(a.done) is getting created i.e the file is getting created on the same server and not on the different server.
Is there any function module or any other way for the file to get generated in the PI system.
Please explain with an example.
Regards,
VishTry to use search FTP in se37 or checkout the below FM
CALL FUNCTION 'EPS_FTP_MPUT'
EXPORTING
RFC_DESTINATION =
* FILE_MASK = ' '
* LOCAL_DIRECTORY = ' '
* REMOTE_DIRECTORY = ' '
* OVERWRITE_MODE = ' '
* TEXT_MODE = ' '
* TRANSMISSION_MONITOR = 'X'
* RECORDS_PER_TRANSFER = 10
* MONITOR_TITLE =
* MONITOR_TEXT1 =
* MONITOR_TEXT2 =
* PROGRESS_TEXT =
* IMPORTING
* LOCAL_DIRECTORY =
* REMOTE_DIRECTORY =
* LOCAL_SYSTEM_INFO =
* REMOTE_SYSTEM_INFO =
* TABLES
* FILE_LIST =
* EXCEPTIONS
* CONNECTION_FAILED = 1
* INVALID_VERSION = 2
* INVALID_ARGUMENTS = 3
* GET_DIR_LIST_FAILED = 4
* FILE_TRANSFER_FAILED = 5
* STOPPED_BY_USER = 6
* OTHERS = 7
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF. -
Weblogic Domain not getting created in SOA Suite 11g R2
I have installed the components of SOA Suite 11g R2 (11.1.1.3) on a single Windows XP SP3 machine (32 bit) following recommended procedures. I tried to configure Weblogic server using Domain Configuration utility. After navigating hrough the wizard, no Weblogic server profile is getting created in the doamin folder. Even the WL Admin server is not getting created. The Domain Configuration utility did not throw any errors.
1) Is this problem related to Oracle repository for SOA suite 11g?
2) Can the repository schemas (Oracle) hold multiple weblogic SOA domain information?Hi,
Weblogic servers directory do not gets created after domain creation or even managed server configuration. It will present itself only when you start the managed server for the first time, that is when it initializes all security attributes, diagnostic attributes (if configured) , etc..
Perform server start and then check if it gets created or not.
## rank answer if it is helpful ##
Thanks,
Ranjan -
BP not getting created while creating employee
Hi,
When I Hire an employee a BP should be created for it. It used to happen earlier in the system but after we moved to another system this is not working. Can someone please let me know the necessary config for this?
I've the following settings:
HRALX ONUMB = 2
HRALX OSUBG = MD
The MD number range is from 90000000 to 9999999999. Should this number range be internal or external?
When I use the HR_SYNC_PERSON report for an employee I get the error as
"Determination of connections to object 'BP' of 'CP' '50000201' failed"
"Object of type 'US' with ID '1122' does not exist or is inconsistent"
"Determination of connections to object 'BP' of 'O' '50000101' failed" etc
Also I need to upload the employee master data using LSMW and BP does not get created with LSMW also? Is there some specific config while using LSMW?
Please help.Whenever you are uploading employees using LSMW, you need to run program HR_SYNC_PERSON.
Pls refer to the following thread for further info:
Assignment: Business partner for person '50000029' is not unique
Regards,
Dilek -
AUC Asset not getting created when Internal Order is created
Dear Experts,
While Creating the internal order ( Object Class - Investment Measure)
AuC (Asset Under Construction) not getting created automaticall . Note Investment profile is already there in the order.
Following steps below are configured -
1. Define the AuC Asset Class (with investment measure) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Investment Profile - OITA
a. Assign the AuC Asset Class (Step-1) in the investment profile
4. Assign Investment Profile to Model Order - OITA
5. Define Order Type (Investment) - KOT2
a. Settlement Profile - OKO7
b. Maintain Allocation Structures - OKO6
Thanks
SanjaiHi Sreekanth,
What is the setting needed to create AUC Automatically when an Internal order is created ?
I have done all the setting, but still when I save Internal order neither AUC asset is getting created.
So I went to extras selected create AUC and it went to AS01, but when I came back (F3) from AS01 to Internal Order and save , Auc Asset is not getting captured in the settlement rule. I even tried to give manually the AUC Asset in the settlement rule, for which sys is not allowing in the settlement rule.
Any thoughts are highly appreciated
Advance Thanks
Sanjai -
Accounting doucment not get created for Credit Memo
Hi
When creating a cancellation doucment(vf11) for credit memo accounting document not get created.While I go for analysis then it is determining the G/L account.But not getting created the accounting doucment.
When i select "Release to accounting" then it is giving a message like this:
"Automatic clearing of billing document 951
and canc. doc. 90000572 not poss." as informatiion first
and then later it is throwing an error message that "maintain correct number range"
While for the same material or earlier cancellation happened and accounting doucment get created.
Please help me out;How would i get this solved?
Thanks in advanceHi,
You may also check for Number Range - Maintainance & Assignment.
T. Code: SNRO
Table/ View: RV_BELEG
Here, Mantain Number Range.
To Assign,
T. Code: SM30
T.Code: Bill_Num (or select if different in your case)
Assign No. range to your combination of Sales OrgDist.ChannelBill Type i.e. for Cancelled Billing Doc. Type
To Maintain Number Range for Accounting Documents,
T. Code: FBN1
Best Regards,
Amit -
SRM PR is not getting created in ECC backend
Hello Experts,
We are running SRM 7.0 with SRM-MDM Catalog, we are using SRM for shopping. We do have PI 7.11 running in the Environment as well.
We are on ECC 6.0 with Ehp 4.0
Purchase Order:
However we can see the PO creating successfully using PI.
Question, in the SRM table (BBP_FUNCTION_MAP), we see the object type: BUS2012 for ERP 4.0 has adapter name: /SAPSRM/CL_SOA_ADPT_PO_CRT_ERP for when creating PO. Please see teh screen shot.
is this the reason that we need PI?
Purchase Requisition:
PR Creation is not working:
PR is not getting created in the ERP, PR uses Object type: BUS2105, Adpater CL_BBP_BS_ADAPTER_RQ_CRT_470 for ERP 4.0 System type, can you please tell me if the adapter is correct for ERP 4.0 system type?
I also have a question to ask:
1) Where did you see that PR/PO was send to PI System (PI1)? My understanding is that since ERP amd SRM are 2 ABAP Systems, why we cannot send the PR/PO directly to ERP system from SRM? Why do we need a middleware(PI) in between for this process? We should be able to USE BAPI function to do it correct?
Please advice.
Thanks
Kumaryes, i could see a PR number with all this additional details as below.
Table BBP_PDBEI
CLIENT 453 Client
GUID 4CAEFA58EB9D005CE1008000AC1C2031 Globally Unique identifier
BE_LOG_SYSTEM QA1400 Logical System of Logistics Backend
BE_OBJ_ITEM Follow-On Object Item in Back-End System
BE_OBJECT_TYPE BUS2105 Follow-On Document Object Type in Back-End System
BE_OBJECT_ID 2000000167 Follow-On Document Object ID in Back-End System
BE_REFOBJ_TYPE Reference Object Type in Back-End System
BE_REFOBJ Reference Object in Back-End System
BE_REFOBJ_ITEM Reference Object Item in Back-End System
BE_REFOBJ_SBITM Reference Object Sub-Position in Backend System
BE_REFOBJ_TYPE2 Reference Object Type in Back-End System
BE_REFOBJ2 Reference Object in Back-End System
BE_REFOBJ_ITEM2 Reference Object Item in Back-End System
BE_REFOBJ_FYEAR2 0000 Reference Document Object - Fiscal Year in Back-End System
BE_STGE_LOC Storage location
BE_PLANT 2016 Plant
BE_BATCH Batch Number
BE_VAL_TYPE Valuation type
BE_MOVE_REAS 0000 Reason for Movement
BE_EXPERYDATE 00000000 Shelf Life Expiration Date
BE_PUR_GROUP 206 Purchasing group
BE_PUR_ORG 2000 Purchasing organization
BE_CO_CODE 2000 Company Code
BE_DOC_TYPE CLRQ Purchase Requisition Document Type
BE_ACCREQUIRED Account Assignment for Logical Backend Required
BE_SP_STK_IND Key for Special Stock Section
BE_INFO_REC Number of purchasing info record
BE_MOVE_TYPE 201 Movement type (inventory management)
BE_PACKNO 0000000000 Package number
BE_INTROW 0000000000 Internal line number for limits
BE_ITEM_TEXT Short Text of a Service Purchase Order Item
BE_PO_PRICE 1 Price from Backend
BE_UNLOAD_PT 200 Unloading Point in Backend
BE_DEL_IND Deletion Indicator in Backend Documents
BE_TRACKING_NO Requirement Tracking Number
BE_COND_TYPE Condition Key
BE_COND_STEP 000 Level Number
BE_COND_COUNTER 00 Condition counter
Maybe you are looking for
-
HOWTO: Low DPC latencies ( 100 us) on bootcamped Macbooks (Pro)
Here is a small HOWTO for getting the lowest possible DPC latencies (<100 us) on bootcamped Macbooks Pro (late 2008): Disclaimer: I did all tests on my late 2008 Macbook Pro Unibody 2.8 GHz model with NVidia chipset and graphic. Most of the following
-
Raw files not opening in Adobe CS4
I just did the update for photoshop CS4 after finding out that I could not open Raw files, but after the update I still can't open them. I own the Adobe Photoshop CS4, and a Nikon D3100 camera. Is there something I have to download in order to get my
-
Hello, We are having a problem with the security provider JSafe JCE running on WebSphere 7. The administrator of Coldfusion 10 does not run after setting the password. We had remove the security provider at runtime using these lines of code: <cfset o
-
DBA Reports large number of inactive sessions with 11.1.1.1
All, We have installed System 11.1.1.1 on some 32 bit windows test machines running Windows Server 2003. Everything seems to be working fine, but recently the DBA is reporting that there are a large number of inactive sessions throwing alarms that we
-
Question on using student license for commercial use
As a student, I had purchased a Student Edition of Production Premium 5.5 at my university . Am I allowed to use the software for commercial use?