Site not updating?

I've created a site on iWeb which post to an ftp address. I made some changes, the pages show up red (to show changes have been made), and the Publish Site arrow at the bottom become accessible. However, when I go ahead and Publish nothing gets updated. It does go through the process, then pages turn back to blue and it says my site has been update, but it hasn't. Help! Thanks

Have you cleared your cache in your browser?
Sometimes the site is updated but your browser does not reload the new files.

Similar Messages

I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

Safari Top Sites Not Updating

My Top Sites is not self-updating. I no longer get the 'star' notice when a web page has been changed and the image shown on Top Sites is from my last visit to the site.
Can anyone help?
Thanks.

I'm having the same problem with the Top Sites thumbnails not updating themselves (without having to manually visit the site). It had been working, but now it has not for a couple months. I forget if it coincided with updating Safari to 4.0.5 or not; it seemed like it was right around that time.
I should also mention that my internet connection and setup have remained consistent from the time that it was working to now. I am not behind a firewall or proxy of any sort.
(Note to Jared_Dub: The blue star is shown on thumbnails that you placed there manually as opposed to your most visited pages which Safari automatically places. It has nothing to do with showing you if there have been changes to the page or not. Just thought I should clarify that point.)

Muse site not updating

Hi
Could anyone help me my site is not updating correctly since changing nameservers.
Published changes from Muse only updating to:
http://belowthenoise.businesscatalyst.com/
NOT updating to:
www.belowthenoise.com
I've updated my hosts nameservers to the business catalyst ones
ns1.worldsecuresystems.com
ns2.worldsecuresystems.com
ns3.worldsecuresystems.com
I've added a new domain site domain settings in BC
belowthenoise.com
My site www.belowthenoise.com redirects fine!
Do I need to add anything in A records and CNAME records?
Thanks
Scott

Hi Scott,
I see that you have added the domain to your site however the DNS is still pointing to the old host.
- http://www.dnswatch.info/dns/dnslookup?la=en&host=belowthenoise.com&type=NS&submit=Resolve
belowthenoise.com.
NS
86400
ns1.vidahost.com.
belowthenoise.com.
NS
86400
ns2.vidahost.com.
Please update this within your domain registrar (where you purchased the domain) and add our records accordingly.
http://kb.worldsecuresystems.com/kb/change-domain-name-site.html#main_Step_2___Point_the_d omain_name_to_our_servers
Kind regards,
-Sidney

Slide Site Not Updateing in Other Users Views

I have created a slide site with 100's of slides. Everyslide has an "owner" assigned to it so people can filter for the slides they are responsible to update. When I view the site I can see all the "owners" in the filter
list that I have assigned and are supposed to be there, in the contributors views they can only see a few names, some of them which actually don't have slides in the deck.
After uploading slides, I used Edit in datasheet view to update the "owners".
Any thoughts?

Okay,
I think I have figured out the real issue here. In just about every other viewer the table that the materialized view or snapshot dumps to is viewable through the list of tables. It does not seem to be doing that in Raptor. Why we are not seeing the m.views or snapshots is that we give the select grants to the table object. (oops?)
While I see the logic for separating them out, I think it would be a smart idea to be able to see the tables for the m.views and snapshots in the table list instead of filtering them out. I am sure we are not the only ones who does the grants in the method that we used.

Site not updating link changes.

I had changed the name of one of my html pages, but didn't update the links that pointed to that page so the destinations were wrong. After I corrected the link destinations I uploaded the changes but when I visit my site and click on the links I get an error page because the links are still trying to take me to the old name html page. In dreamweaver the links are correct. What am I not doing? Thank you.

The first of those two is linking to : http://myrapworld.net/UndergroundReviews.html
which does not exist. If that is not what it should be linking to, and your revised file shows something different, then your revised file did not make it to the server yet. If that is the correct page to link to, then you either have a typo in the filename or you haven't uploaded the linked page as yet. I didn't bother checking the other except to see that it is also missing.
One thing for that first link... you should not stick tags between anchor tags as you did.... they can be tempermental about that at times.
<h3><a href="UndergroundReviews.html">Underground Rap Reviews<br />
      <br/>
    </a></h3>
would be better done as...
<h3><a href="UndergroundReviews.html">Underground Rap Reviews</a><br />
      <br/>
</h3>

Yosemite safari top sites not updating

Now that I am hooked on using Top Sites, it has stopped updating since I updated to Yosemite. Is there some setting I need to change? Sure can't find it in Pref

I found the way to solve this problem for me. It's simply and quick. Just switch of Safari option in iCloud config at my iPhone. Now Top Sites works fine on my MacBook.

Help, published site not updated

Hi,
I published it and the links don't work, plus photos are scattered on the open house page. the links work on the Our Team site, but not on the welcome page.
Everything works and is set properly in iwork 08.
www.hellomarty.com

your hand made bottom navbar is in the body_layer but is is behind footer_layer, and that won't work because of z-index. see my post about z-index:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=7431333
hand made navbar this is a pit fall ever since iweb1:
http://discussions.apple.com/message.jspa?messageID=6550436#6550436
you need to move your hand made navbar from behind footer_layer, try to change page 'content height' to something smaller (in Inspector --> Page --> Layout settings)...
or change z-index with javascript...
or scrub all the above and build the bottom navbar with a widget (notice the navbar get duplicated):
http://iweb3widgets.cyclosaurus.com/SomeFirst_Widgets/Relocated_NavBar.html
javascript is linked to my example.

New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

Some sites, IRS partcularly, show a form but do not update in Firefox but work with IE any fix?

When trying to use Firefox to complete lessons on the IRS Practice Lab site, numbers entered on the screen do not update the server application. IE works so it appears that the site is not accepting data from the Firefox screen. Is there a way to ensure that Firefox is compatible with sites that seem to be designed only for IE?

It is not a pdf. The initial page is https://www.linklearncertification.com/d/. On the right side of the page is a "Practice Lab" link. At this moment it seems to being maintained so is not accessible at all. It should be back up by Monday.
The problem is that when entries are made on a page they do not actually update the database. The screen "blinks" like something is happening but the return is unchanged.
I have IE but people using an Apple and Firefox cannot use the site with firefox.

IWeb not updating site changes, even overnight!

Hi iWeb-experts,
Having problems with iWeb and have waded through the site and other forums and yet to find a solution.
Site is marccheckley.com. I successfully moved the site before MobileMe closed shop and made updates to the site a few months back.
Now I'm trying to upload further changes but iWeb has stopped functioning. I get no status that the site is being changed, as it was previously. And I know this has not happened as I have it linked to my Facebook and no "updated website" has popped up on my Wall.
I even left it overnight to update website changes and still nothing. Even clearing brower's cache etc. I tested the FTP connection all good and nothing been changed since my last updates a while back.
All 'pages' of site remain red, not updated in iWeb.
Really not sure what's happened. Nothing but probs since the closure of MobileMe, my podcast is still on hiatus due to linking problems, now website issues with iWeb.
Anyone have an idea and fix?
Always appreciated.
Marc
iWeb 3.0.4
Macbook Air (Dec 2011)
OSX Lion

If you are using the iWeb FTP to upload make sure the box next to "Update my Facebook profile when I publish this site" is unchecked. Checking this box prevents the FTP from working.
Also make sure you have no bad file names with spaces or special characters - particularly image files. This will halt the upload process.

User Profile email address not updated on Site Collection User Information

Hi All,
Ok here we go....SharePoint 2007 with SSP profile sync not enabled, however I have a few profiles I need to update (email address). This has been completed by editing the user profile in SSP, but when viewing the information via Site Collection >
People & Groups > User Information "Work E-mail" is still showing the old one.
All alerts are still being sent to the old email address, SSP DB UserProfile_Full shows the new email address as per SSP.
Anyone know where else user profile emails are stored which is used by Exchange?
Many Thanks, Roger

As per the following post from GuYuming
http://social.technet.microsoft.com/Forums/sharepoint/en-US/319d5b0e-336a-4815-9ee5-5d1685db867f/how-to-send-sharepoint-alerts-to-users-on-different-domain?forum=sharepointadminlegacy
After the email address in SharePoint user profile is updated to [email protected], you have to wait until
they are synchronized into the user information list in SharePoint site collections so that alert can be sent to that address. For detail, please read http://vspug.com/mirjam/2009/06/17/user-profiles-and-the-user-information-list-or-userinfo-table/ and http://blogs.technet.com/paulpaa/archive/2009/10/01/user-profile-information-not-updated-on-site-collection-s-people-and-group.aspx
--Cheers

Outlook 2010 SP1 Profile Does Not Update After Moving Mailbox Between Exchange 2010 SP2 Sites

I am working on a large mailbox migration from one AD site to another.
Exchange version at both sites:Exchange 2010 SP2
Two Mailbox Servers: MBX01 in site A / MBX02 in site B
(There is a DAG but keeping this simple)
Two CAS Arrays: CASA.domain.com / CASB.domain.com
The RPCClientAccessServer property is set accordingly. Where MBX01 is set to CASA.domain.com and MBX02 is set to CASB.domain.com
Clients:Outlook 2010 SP1
Scenario: I successfully move a mailbox from Site A to Site B. The Outlook client does not automatically update its server settings to point to the new cas array (CASB.domain.com) and continues to connect to the old CAS server (CASA.domain.com).
I have seen a few articles regarding this pointing to workarounds such as:
- repairing the outlook profile on the client
- delete the existing outlook profile
- run a script to update the prf file (re-cache's email at the client)
I am interested in knowing if anyone else has experienced this, what their solution was for a large migration and if any roll-ups or service packs have possibly fixed this problem.
I would also like to know if you have seen this affect ActiveSync devices. I am getting mixed results in my tests and thought it may be contributed toward different device types, mobile os versions, etc...
I have posted this to the Exchange 2010 forum as well, just wasn't sure where to start.
Thanks.
Mike

Hi,
Seems you got several replies in the thread below that you posted in Exchange forum:
http://social.technet.microsoft.com/Forums/exchange/en-US/68ae67c1-59f5-44bb-aadc-0aea3f72ad2d/outlook-profile-not-updated-to-new-cas-array-after-mailbox-move-between-sites?forum=exchange2010#68ae67c1-59f5-44bb-aadc-0aea3f72ad2d
Please come back to the thread above and check if the replies are helpful.
Since this issue is more related to Exchange, we can provide rarely assistance on this problem. If you need any help on Outlook client side, please don't hesitate to let me know.
I would appreciate it if you could post the solution here when you found it, so that other community members who have same question in this forum will benefit from it.
Best Regards,
Steve Fan
TechNet Community Support

Site list update not working with TED and Zenworks for Servers

Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
Subject: Site list update not working with TED and Zenworks for Servers ,
all on Linux
Description: We have an exiting environment with 6 ZfS Servers and now we
brought up a new Server for another location. I configured all same as on
the other Server and the new one created all NAL-Apps at the new location.
But in the Application Site list on the golden App is this Application
missing. So I clicked on the Link up site list on the Distribution Screen
in C1. On ApplicationSite list the App from the new location is missing.
So I removed all and added the new from the new location and now i see all
in the application site list.When I install an app on the client on the
new location NAL is connecting alway th the same (wrong location-server
and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
file.
I looked on the other tab on C1 at the golden app an I see the backlinks
are going to all other servers without the new one. Software installation
on other locations are ok
Regards

Andreas,
I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
Next delete the Distribution from the Subscriber and then re-push the channel.
What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
In this excerpt you will see the entry
Golden App =
This should be were the link is to
You can check this both ways in the Golden App and in the Distributed Application.
Here is a log from me that shows this info as an example of what you should be looking for.
2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..

Sites files are examined but not updated.

So here is my issue, I am trying to add some code to a dreamwever template file (.dwt) and when I go to update the site it examines all of the files but does not update them. The code is not placed in an editable region. The template is based off another template so to add the code I did have to open the file in notepad. I then reopened it. The idea is to try to avoid having to edit the original template because it would effects hundreds of pages on the site. Any help would be appreciated.
Thanks

The template is based off another template so to add the code I did have to open the file in notepad.
There is no natural scenario I can think of that would require that you do this. When you say the code is based off another template do you mean that you are using nested templates? And what is it you are trying to accomplish?

Site not updating?

Similar Messages

Maybe you are looking for