Site not visible on Android

I am building a site in Muse for Desktop, Tablet and Phone.
The site is visible and working normally on the Desktop and iPhone...but not on Android.
What could be causing this?
SITE: 1amazingadventure.com

I have asked but had no response yet. My research tells me that the probable issue is with IE9 and older that aren't compatible with HTML5 or CSS3. Is that right? if so it is a Microsoft issue and people using old incompatible browsers.
What do you think? The site works just fine on Firefox, Safari and Chrome.

Similar Messages

  • Site not visible in IE8

    This is the 4th site I've done in DW and for some reason it's not visible in IE8. Looks fine in FireFox.
    www.giselleaguiar.com
    I changed the meta tag to:
    meta http-equiv="X-UA-Compatible" content="IE=7;FF=3;OtherUA=4" />
    and still nothing. What am I doing wrong?
    Help!

    According to the validator, you have a few problems, the main one being the encoding.
    http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.giselleaguiar.com%2F
    Change the encoding back to <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    then put the page through the validator again and see what errors come up, fix those and then see if the problem is resolved in IE.

  • Muse site not visible on some browsers

    I have created a MUSE website for one pf my clients and they tell me it is not visible on some browsers but did not specify on which it did not show.
    Any suggestions?
    Thanks

    I have asked but had no response yet. My research tells me that the probable issue is with IE9 and older that aren't compatible with HTML5 or CSS3. Is that right? if so it is a Microsoft issue and people using old incompatible browsers.
    What do you think? The site works just fine on Firefox, Safari and Chrome.

  • Top Sites Not Visible When Safari is Opened by a Link

    When Safari is opened via a link, such as a link within an email, clicking on the Top Site button in the menu bar does not show my Top Sites (the starting web page remains visible). The Top Sites are there because you can click in the location where you know a Top Site should be and you will go to that linked page. In order to get this working properly again, you have to close Safari and reopen. I have tried resetting Safari/Top Sites but no success. I hope this is clear; it's easier to demonstrate than to describe.

    Since the problem started ocurring after installing another application, I would suspect something with that last installation. Without knowing more about the installations, I would not be able to help much. Did the other installation perhaps install another DLL of the same name? Try uninstalling the last app to see if the problem goes away.
    - tbob
    Inventor of the WORM Global

  • Portions of iWeb site not visible

    Hello
    I'm uploading my iWeb site via Cyberduck to A Small Orange
    And occasionally, some elements just don't show up. They load, and I can see them as they are loading, but then they disappear. For example, the book in the background here:
    http://gvkauai.jantonbusch.com/HFHGV_trip%3A_GV_10023_Homepage.html
    What gives? Should I upload with a different program? When I upload, I do a replace all. Should I not?

    For example, the book in the background here:
    Do Safari > Window > Activity. Does the file for the book show up as missing? If not, then any visibility problems are presumably caused by something covering it up rather than any kind of uploading issue.

  • How to prepare folio for Apple pre-approval, but not visible on Android?

    Quite possible that i'm just overlooking something, but this doesn't make sense for me. We have already active app in App Store and Google Play, with bunch of issues for sale. Now we need to prepare some special issue, which will go to sale next week or something like this. So i want to prepare in-app purchase for pre-approval. Now we don't have full folio, just dummy one with cover.
    Workflow as per publishing guide is:
    - make folio public and retail
    - submit in-app purchase to Apple
    - and wait.
    I did it.
    Ok, but what about Android? I even created in-app purchase in google play, set the correct Product ID and set as unpublished, but i still see this dummy folio on Android. I can't buy it, but i see it, and that's not good.
    So how to solve this?
    Thanks for fast help!

    Sorry, but you don't understand my problem.
    I've created dummy folio for approval. For approval, i need to set folio as public, retail.
    on iPad, i DON'T see this dummy folio (because in-app purchase is not approved) and it's correct. On Android, i see it. This should not happen! Customer SHOULD NOT see this dummy folio on Android.

  • Web site not visible in iweb, where did it go?

    I created 2 web sites in iWeb.
    Posted 1 to mobilme.
    Now when i open iweb nothing appears and everything is greyed out in the top menu bar.
    Any idea where it has disappeared to and why i can't see it?
    Please help.

    Try the following;
    1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
    2 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
    3 - reboot.
    4 - launch iWeb and see if the domain file will open.
    If that didn't help continue;
    4 - move the domain file from your User/Library/Application Support/iWeb folder to the Desktop.
    5 - launch iWeb, create a new test site and save.
    5 - go to the your User/Library/Application Support/iWeb folder and delete the new domain file.
    6 - move your domain file from the Desktop to the iWeb folder.
    7 - launch iWeb and try again.
    OT

  • NEF files from Nikon d800 not visible in bridge and photoshop cs6- using mac ver.10.8.5. downloaded plugin from site 8.3 but issue unresolved

    NEF files from Nikon d800 not visible in bridge and photoshop cs6- using mac ver.10.8.5. downloaded plugin from site 8.3 but issue unresolved

    You can install and use Camera Raw 8.8 with OSX 10.8  Go to Help > Updates in Photoshop CS6

  • Re-publish site using 3rd party FTP Client-Changes are not visible

    I uploaded my Iweb site to the server using FileZilla. When I make changes in I-web and republish, the changes are not visible. I even tested it out by deleting the site folder and re-uploading everything after I re-published the site in IWeb...but the change still isn't visible. Any suggestions as to why?

    Apparently you publish to a folder.
    iWeb's job is done!
    What you do next with the files is your responsibility.
    Try uploading the changed files to their respective folders on the server.
    You can identify the changed files by the date/time.
    Then in the browser, clear the cache and reload the page.
    iWeb is not involved.

  • Not finding Mozilla Firefox in android market place and site not found thru default browser either Feb. 11, 2011

    I want to install Firefox on my htc droid. I searched market place; not found. When I use default browser on the phone (google) and type in url as instructed on website, I get site not found.

    Firefox cannot be downloaded from the Android Market on phones with incompatible processors. For more information, and to check your phone's compatibility, see:
    https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements

  • I created a shared stream and selected publicwebsite, but pictures are not visible at that site.  What can I do?

    I created a shared stream and selected public website on my iPad air, but pictures are not visible at that site.  What can I do?

    it's rchrdsrw again-- previously visible photos on shared photos on website are also no longer visible.

  • "Make this recurring" check box not visible on Mobile

    I have created and successfully used a Donation button for my 501c(3) business.It works great in browsers on laptop and desktop computers.However, the "Make this recurring" check box is not visible on IPhone, IPod, IPad, Android Pad, or Android phone. How can I enable recurring payments on mobile phones?The URL on these devices starts: https : // mobile . paypal . com / us / cgi-bin / webscr ? cmd=_express-checkout-mobile ... Thanks in advance

    Louisey,
    Welcome to the forums!!
    a few questions first...
    a, did your site work in MobileMe initially before you purchased your domain name?
    b, does it still work if you type in your MobileMe URL rather than the purchased domain name?

  • Project Server 2010 - Assigned tasks not visible in PWA

    Hi,
    When I enter an issue on a project site, the assigned issue is not visible in the PWA under Issues & Risks.
    Based on this link (http://social.technet.microsoft.com/Forums/en-US/f5abd024-3c9a-47f8-a7cb-7743fafebf2b/project-server-2010-cannot-see-assigned-issues-and-risks) I have tried to solve it however without success.
    In the queue jobs I have the following error details:
    General
    Reporting Wss list sync failed:
    ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='6c8a0779-3c9f-4d25-a81c-04d69d6fce1d' SPListType='2136b7a0-03b9-4547-8b2d-c66497accd08' Error='1100'. 
    ReportingWssSyncListFailed (24018) - 1101. Details: id='24018' name='ReportingWssSyncListFailed' uid='1573855e-b176-44cc-bf92-8959d167f8fe' SPListType='2136b7a0-03b9-4547-8b2d-c66497accd08' Error='1101'.....................................
    Reporting message processor failed:
    ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='839ed0b8-6b8c-4bd5-bfbe-540349c1f27a' QueueMessageBody='ProjectUID='2136b7a0-03b9-4547-8b2d-c66497accd08'.
    ForceFullSync='False'. SynchronizationType='All'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'. 
    ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='b0e773af-5cc3-4965-85b3-a4d8050e86f5' QueueMessageBody='ProjectUID='2136b7a0-03b9-4547-8b2d-c66497accd08'.
    ForceFullSync='False'. SynchronizationType='All'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'............................................
    Queue:
    GeneralQueueJobFailed (26000) - ReportingWSSSync.WSSSyncMessageEx. Details: id='26000' name='GeneralQueueJobFailed' uid='07edaa28-647c-4dee-974e-06f47e4b4e40' JobUID='899bd048-2c19-4176-bd6c-1b45b8379a40' ComputerName='NLHGOL7FPR' GroupType='ReportingWSSSync'
    MessageType='WSSSyncMessageEx' MessageId='1' Stage=''. For more details, check the ULS logs on machine NLHGOL7FPR for entries with JobUID 899bd048-2c19-4176-bd6c-1b45b8379a40.
    As I understand this error could be due to a mismatch between the fields that are 'standard' in the project server and fields that are op the project site.
    If the reporting database could not sync, will consequently also the issues not be visible on the PWA??
    Any suggestions how to solve this?
    Regards,
    Dirk

    Hello,
    Yes, if the Issues & Risks are not being synchronised to the Reporting database then this will impact the issues & risks appearing on the PWA homepage reminders web part. See this post on how the data gets to the Reminders web part in Project
    Server 2010:
    http://pwmather.wordpress.com/2012/07/13/projectserver-active-issues-and-risks-on-pwa-reminders-web-part-ps2010-sp2010-sharepoint/
    The error you are seeing is probably caused by the default Issue or Risks columns being edited or removed from the Issues or Risks lists. It might be worth taking a look at this post:
    http://pwmather.wordpress.com/2011/06/20/project-server-2010-project-site-default-fields/
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

  • Captivate 5.5 published files are not visible in Fire Fox or open in new window.

    When I publish and post Captivate 5.5, the HTML or the swf files do not display in Fire Fox (latest version) without forcing the file to open in a new window (if it displays at all). If it does work, the Flash security blocks the swf on an ugly view until the user clicks.
    I thought it was because I have to assign a direct URL to each component, but all of the other Captivate sites I have reviewed have the same issue when viewing in Fire Fox.
    IE will display after the active x is authorized (I can live with that).
    You Tube and other Flash display properly in Fire Fox, just not Captivate products.
    I have disabled off all plugins, modified the protected settings, and everything I could find listed in the Fire Fox help. I have installed a previous version of Flash and Shockwave Player. Short of reinstalling windows, it is not working and that will not help because the published content is not visible on any other machine in the office or at home.
    The files are in a Portal, so I cannot share them unless you are in the DoD and have an AKO or DKO account.
    However, here is another example of the Captivate not working.
    https://clc.dau.mil/games (this displays on some computers, but not all)
    http://www.hartisd.net/pages/uploaded_files/Assignment_Search.mht (After allowing the mht, this displays in IE)
    I am not sure if it has something to do with the other 2 published xml files that are not directly referenced in the html, but I just need either the swf or html to display in the iframe without forcing another window to display and without a lot of dependecy issues with other add-ons in Fire Fox.
    - Thanks!

    Any of the DAU games, if they display. It is a government site, so they have the standard gov garbage (stuff not working like certificates), but nothing is harmful nor can they do anything to track other than the current session.
    It is kind of weird how the content is displayed... It is not an intranet, it goes to a limited access portal. When I store content, it uses an absolute path instead of relative path. Very aggrevating when using many of the tools for non-programmers (like me), and probably more aggrevating for programmers.
    Whether I point directly to the .swf or to the generated HTML, the content displays in IE, but not in FF.
    It may be a combination of FF and Captivate. FF seems rather flaky in dealing with swf files. There is the consideration for add-ons, but I tried on a newly imaged computer and it still was not working. Even after going through all of the FF steps to get it to work.
    Basically we had to create a new HTML file to display the content because the Captivate published files don't work. However, the new HTML does not reference the XML files.
    When I publish, I get 5 different files, .swf, .htm, .js, and 2 .xml. When I dig through the code (once again, not a programmer, soo I may be missing something), even round tripping to Flash, I do not see how the .xml files are referenced at all.
    These may be different topics, not sure, it came up because I am trying to get a simple solution from the product that can be easily transferred to our production servers and available for Solders to access.
    - Thanks
    Michael

  • I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites.

    I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites. I was able to get window open from the help "window" and open sites from there just not from new: window tab or bookmarks those stay invisible? I tried the help suggestions, safemode,etc.

    Hi CMorenoOT,
    This prompt is usually displayed when your Apple ID needs to be configured for the iTunes Store. You'll want to run through the additional steps to setup your country, and payment information.
    iTunes: How to set up an Apple ID within iTunes
    http://support.apple.com/kb/HT2731
    Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
    - Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
    - Once you've filled out all of the fields for your billing information, tap Next.
    For more information:
    Using an existing Apple ID with the iTunes Store and Mac App Store
    http://support.apple.com/kb/HT2589
    Thanks,
    Matt M.

Maybe you are looking for