Site renders about 20% too big in IE - text and graphics

I used an Adobe template, then customized it, which is
probably the problem!
Web site is:
http://www.lmrfd.org/
CSS is located at:
http://www.lmrfd.org/css/lmrfd.css
Looks fine in Firefox, but IE blows everything up about 120%,
making the graphics look bad. I can't figure out what I've done
wrong. Any help or advice is appreciated!
Thanks,
Bruce

Hello,
They look the same to me in IE7 and FF.
If using IE7, does it say 100% in the bottom right corner of
the browser?
Take care,
Tim
"Bruski65" <[email protected]> wrote in
message
news:fvft32$9a$[email protected]..
>I used an Adobe template, then customized it, which is
probably the
>problem!
> Web site is:
>
http://www.lmrfd.org
> CSS is located at:
>
http://www.lmrfd.org/css/lmrfd.css
> Looks fine in Firefox, but IE blows everything up about
120%, making the
> graphics look bad. I can't figure out what I've done
wrong. Any help or
> advice
> is appreciated!
>
> Thanks,
>
> Bruce
>
>

Similar Messages

A document page opens that is too big for the display and runs off the end of the monitor

How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

When I open my iPad the page is too big for the screen and won't shrink down. The keypad has also become very 'sticky'

Recently when I open any apps the pages are too big for the screen. They shrink when pinched but immediately become bigger again. It's very difficult to scroll too. The keypad has become very sticky. Missing letters and spaces when I type and needing to tap the keys much harder than usual

I have the exact same problem, I think. I was on my iPad 3's home page swiping R-L to locate a certain icon when all of a sudden the screen appeared to get HUGE. So big I could only see one or two icons. I couldn't even turn it off to try a reboot because after I pushed the sleep/wake button, I couldn't find the red slide bar. I finally just had to wait for the battery to die, then recharge it, and it looked normal again. I also spoke with several friends who haven either iPads or iPhones, and they've all had this happen to them. I checked my accessibility settings, and Zoom was already off. So what is causing this problem for so many people, and what can we do to prevent it? Please help.

Both the Texts and Graphics When I open windows are too large and blurry. Is this anyway I could fix this?

When I open Firefox (Firefox is updated to its latest version) both the text and the graphics are too large. I've tried zooming in and out features, but the texts become unreadable.

CTRL+0 (<--that is a zero) will reset your zoom level on affected pages. Firefox remembers the zoom level you last used on a page.<br />
See Firefox built-in Zoom functions:
*http://support.mozilla.com/en-US/kb/Page+Zoom
*http://support.mozilla.com/en-US/kb/Text+Zoom
If that does not fix the problem, you can try renaming the file (''with Firefox closed; Firefox button > Exit or File > Exit'') '''''content-prefs.sqlite''''' to content-prefs.sqlite.old (or delete the file) in the Profile Folder to reset the page zoom on all sites. That file will be re-created when you restart Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*You can use the following to go to the Firefox profile folder:
**Help > Troubleshooting Information > Profile Directory, click Open Containing Folder
Zoom Add-ons:
*'''''Default FullZoom Level''''': https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ '''''
*'''''NoSquint''''': https://addons.mozilla.org/en-US/firefox/addon/nosquint/
**More info on NoSquint: http://urandom.ca/nosquint/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

I just loaded the 8.1 operating system on my iPad. It has been sitting for about 4 hours with the black screen and white apple with the bar underneath. What should I do?

I am having trouble after loading the 8.1 operating system on my ipad.
My iPad is model A1397 EMC 2424
MEID ********
Serial DL******JHH
64GB
I started loading 8.1 about 5 hours ago and it is still sitting with the black screen with the progress bar underneath. It shows that it is almost done loading - just has a tiny bit of the progress bar left.
<Edited by Host>

I Don't know if this will work for anyone else but just FYI - after loading 8.1 on my iPad it froze for several hours on the black screen with white Apple and progress bar underneath. It would not do anything. I thought I was doomed. I accidentay left it sitting overnight without plugging it Back into the charger. I meant to but got sidetracked and thought it was plugged in. During the night the battery was totally drained so this morning my iPad was dead. I plugged it into the charger and after a few minutes the battery icon came up showing it was charging. I gave it about 30 minutes and then turned it on and the new operating system came up. It looks like it might be ok now. I can't say I recommend this, but it worked for me.

Clip im importing is too big in program window, and too big in exported media

Hi all, would appreciate any help from you guys im going round the bend- im on a friends machine and trying out PP5 for the first time.
I have a clip im trying to export with two other clips in the same sequence. The clip is a .mov file, 1920 x 1080.
When i right click on the two other clips (Mpegs, 320 x 240) and hit scale to frame, everything goes fine for them in the export and they fit the program window too perfectly. But for some reason when I do it with the above clip, there's lots missing around the edges. I'm even setting the project up to have 1920:1080 (16:9) before I start.
Also, when I import the offending clip into the source window it automatically sets it to 50% and it is viewable perfectly at 50% ( if I change the source window to 100% I can not see the whole frame in the source window). But at 50% in the program window, it is still cutting off huge amounts aroudn the edges.
Can someone please help and suggest some remedy for this? This is driving me demented. Cheers

Hi Jim, thanks for coming back to me- sorry im long getting back to you, ive been working.
I tried your suggestion ( selecting monitor to fit), but it's still cutting a massive amount off the edges of the first clip - which is 1920x1080. The second clip still fits ok though at 320x240.
Some more info - when I import the 1920x1080 into the source monitor, it automatically goes to 50%, and then displays perfectly. Then when I drag it to the timeline, alot of it is cut off around the edges as above. However, if I set tyhe program monitor to 50%, the same amounts are cut off.... Does that help?
Any other ideas?
Thanks again for the help

HT1923 I have a Vista Operating system with 2 users. Somehow I got two different play lists each with one user. One is too big for the storage and has a vast amount of duplicates. Can I delete the one that is twice as large and then access the other li

I have a Vista operating system with 2 users. Somehow I got two diffent libraries for the users. How can I delete the one and then access the correct library on the other users profile?

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Text too Big for Contacts Window and BBM

Is there a fix for the oversized text in the contacts and BBM window?

Are you seeing your Contacts' names cutoff along the bottom or what?
What size font do you have set?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

What are solutions for a way-too-big database?

Hi guys!
I'm a software developer and not very good in database designing. One day, I was asked something like this :
"For example, there is a company with a web application. One day, the database for that application is way too big, caused performance issues and others, what is the solution for that application database?"
At first, I thought that was about using multiple database with single app. But I don't know if I was right.
I want to ask that what are the solutions? If it's "multiple database" then what should I do? Using two connection to 2 database simutaneously?
I appreciate any replies. Thanks!

847617 wrote:
Thanks Lubiez Jean-Val... for your links.
I've got some more advices like :
- "transferring workload to another database using different techniques to copy the data from original db"
- "redesign of the database"
So that means we use 2 different databases?Sometimes it is deemed desirable to keep only fairly recent data on the OLTP database, where the normal transaction activity happens, and replicate the data to another database that also contains historical data. This second database is used for heavy reporting tasks.
And "redesign"?As in, design it from scratch and do it right this time. Make sure all data relations are properly defined to Third Normal Form; make sure all data is typed properly (use DATE columns for dates, NUMBER columns for numbers, etc); make sure you have designed effective indexing; make sure you use the capabilities of the rdbms and do NOT just use it as a data dump.
See http://www.amazon.com/Effective-Oracle-Design-Osborne-ORACLE/dp/0072230657/ref=sr_1_3?s=books&ie=UTF8&qid=1301257486&sr=1-3
are they really good solutions?Like most everything else, "It depends"
It depends on if the proposed solutions are implemented properly and address the root problem. The root problem (or even perceived problem) hasn't yet been defined. You've just assumed that at some undefined point the database becomes "way-too-big" and will cause some sort of problem.
It's assumed that we don't have or can't use partitioning.
And why is that assumed? Yes, you have to have a version of Oracle that supports it, and it is an extra cost license. But like everything else, you and your management have to do a hard-nosed cost/benefit analysis. You may think you can't afford the cost of implementing partitioning, but it may be that you can't afford the expenses derived from NOT implementing it. I don't know what the case is for you, but you and your management should consider the factors instead of just rejecting in out of hand.
:):)...You are making me - a student so excited about the history. From slides rule to the moon....
Edited by: 847617 on Mar 27, 2011 10:01 AMEdited by: EdStevensTN on Mar 27, 2011 3:24 PM

15 minute, 400 meg project too big for one DVD?

I have a 15 minute video in widescreen format that is about 400 megabytes in size according to the project info.
When attempting to burn, I am told that the project size is too big for a DVD and suggests I use a dual layer DVD.
I have over 390 gig available on my 1 TB hard drive.
I have no chapter markers
I have reduced the intro clip(s) to less than 30 seconds.
All to no avail. I am now burning the dvd using Toast, which is perfectly happy using 400 megabytes of my DVD to burn the disk.
What assets could iDVD possibly be adding to use up the remaining 4 gig of disk space, and how might I view them and delete them?
I know this is an old topic...I've read lots of posts including one similar to mine. In most cases people are attempting to burn over 1 hour of video. In the one case similar to mine, the person had full length video in each chapter marker (or some such issue). I have none.
In my case it is a 15 minute video (granted its in HD/widescreen format). Why, with a project size well under the disc size, does it refuse to burn due to size limits? Clearly the project info does not reflect iDVD's actual size requirements for the project.
Why not?
Finally, changing to 4x3 is not an option and yes, I have tried changing the compression algorithm from best performance to higher quality, though this is supposedly for video longer than 60 minutes.

Hi
Free space only referes to Start-up (boot) hard disk. iDVD can't use any other for scratch files.
25Gb is my minimum setting.
15 minutes video - to much indicates that it might have been droped it into iDVD window
but here landed it into a "button area" - not movie area.
Recommendation in case of this is to move it out (or start a new iDVD project)
and in iDVD use the Import function instead. Now it lands where it should.
And dep on Your encoding choise the movie can be up to 60 or 120 minutes long
(menu included => simple menu = more movie)
Other alternative is feeding iDVD strange video formats that can give many
interesting problems eg .wmv, .avi, .mpeg4 etc.
Yours Bengt W

HDR window too big for screen

When I open the "Merge to HDR Pro" dialog box, it is too big for the screen and I cannot resize it. Pressing the green + button just resizes the too big screen above my dock, but it is still too big for the options that lie at the bottom of the dialog box. How do I fix this?

What is the screen resolution of your monitor?
One workaround I've seen is:
Hide your OS X dock
Quit Photoshop
Restore your prefs: http://adobe.ly/PS_Prefs
Restart Photoshop

Too big and "shaking" view in iMac -- help!

Hi,
I'm inexperienced with macs and the owner of this computer is out of reach --- I accidentally changed some setting in an iMac and now the view is too "big" for the screen and the image shakes everytime I touch the mouse. The resolution should be normal. Please tell me how to make the view smaller, to fit the screen!
Maria

Try pressing Command + Alt(Option) + 8 to Zoom out.
Or check System Preferences>Accessibility (or Universal Access) and make sure Zoom is off.
Or, if you have a Magic Mouse, hold the Control key and stroke up/down on the mouse to zoom in/out.

Applescript error window too big

Hey guys:)
whenever i am working on an applescript and it has an errorwindow that is way too big for my screen and i have no idea how to get it away, i have to force quit apple script editor everytime i have it, is there a solution for this:)?

And if i curl in applescript do i have to delete anything in order to not harm my computers memory on the long term?

Print dialog box too big

Adobe Reader 8.1.2; Windows XP; screen resolution 800 by 600 pixels.
Normally, whenever I print a PDF, I click on the printer icon on the toolbar or go to File > Print. The Print dialog appears, and I click on the OK button at the bottom of the box.
Recently, for some unknown reason, the Print dialog appears too big on my screen, and I cannot see the OK button at the bottom of the box.
However, when I change the screen resolution to 1024 by 768 pixels, I can see the OK (to print button), but all other text, icons, etc., are too small to read.
Ultimately, I need to see the OK (to print button)and the text, icons, etc., need to be sized larger, to the 800 by 600 pixels resolution.
TIA,
Jerry D.

I am trying to resolve a similar problem on a Toshiba laptop running Vista. Dialog boxes are being displayed that fill the entire screen truncating the OK, Cancel and Apply buttons that should appear at the bottom of the dialog box. This is happening on all contol panel and games settings dialog boxes. I have tried the Toshiba zoom settings (FN+Space), but this has not foxes the problem.

PC - TV [Video too big for TV Screen.]

Hi,
I'm running Windows XP with an FX 5200 128 Video Card. I have an S-Video plug that turns in to a Yellow RCA wire and plugs in to my TV. I have my display properties set to "Clone".
When I play a video using Windows Media Player, I can see it on my Computer Screen as well as my TV.
However, the picture on my TV seems to be slightly cropped. It looks like I am missing the TOP and SIDE portions of the Video. The video fills the entire TV screen, but it looks like the picture is too big for the TV and I'm not seeing the edges.....
Any suggestions,
Thanks,
Andrew.....

make sure you're using the correct display drivers from nVidia Drivers
then in the driver control panel for your TV settings, use the zoom controls to adjust how the picture looks on your TV

Site renders about 20% too big in IE - text and graphics

Similar Messages

Maybe you are looking for