Site suddenly not taking passcode etc

Our site has been up for three months no problem. However recently if you type in the admin and password it takes you to iTunes but you have no editing rights. Any ideas why it changed?

The first step in resolving this kind of problem is to apply the debugging suffix along with your admin credentials when requesting access to iTunes U. This will bring up a debugging page ... the page will show what credentials Apple thinks you're sending.
If you have a Mac handy, I have written a tiny application you may find useful ... it allows you to access iTunes U with your admin credentials ... but it does not require that you have a CGI transfer script working. You can even pass the debug suffix using my app. The app can help you verify that there is something wrong with your site. You can download the app here:
http://itunes.uic.edu/itunesuaccess.html
MacBook Pro Mac OS X (10.4.8) I lied. I'm running Leopard

Similar Messages

In one website, it takes to much time to load the page, in other site its not taking time, so do i need to enable or change any settings

in one website, its taking time to load the page, on other PC its not taking any time( with internet explorer) in my PC other websites are opening quickly but this website takes too much time with firefox

Zepo wrote:
My iMac has been overwhelmed almost since I bought it new. After some digging the guiness bar suggested its my Aperture library being on the same
internal Tera byte drive as my operating system.
Having a single internal hard drive overfilled (drives slow as they fill) is very likely contributing to your problems, but IMO "my Aperture library being on the same internal Tera byte drive as my operating system" is very unlikely to be contributing to your problems. In fact the Library should stay on an underfilled (roughly, for speed, I would call ~half full "underfilled") internal drive, not on the Drobo.
Instead build a Referenced-Masters workflow with the Library and OS on an internal drive, Masters on the Drobo, OS 10.6.8 (there have been issues reported with OS 10.7 Lion). Keep Vault backup of the Library on the Drobo, and of course back up all Drobo data off site.
No matter what you do with i/o your C2D Mac is not a strong box for Aperture performance. If you want to really rock Aperture move to one of the better 2011 Sandy Bridge Macs, install 8 GB or more of RAM and build a Referenced-Masters workflow with the Library and OS on an internal solid state drive (SSD).
Personally I would prefer investing in a Thunderbolt RAID rather than in a Drobo but each individual makes his/her own network speed/cost decisions. The Drobo should work OK for referenced Masters even though i/o is limited by the Firewire connection.
Do not forget the need for off site backup. And I suggest that in the process of moving to your new setup it is most important to get the data safely and redundantly copied and generally best to disregard how long it may take.
HTH
-Allen Wicks

Videos on tutorial site suddenly not loading?

Having a problem with videos on a US tutorial site which worked fine until two days ago. They hang on the buffer screen and won't play on my MacBook Pro, but are fine on PC, iPhone and iPad.
My repairer has tried reinstalling Flash (new and previous versions) with no success and suggests a problem with JW Player on the site - www.larryjordan.biz
Anyone else having similar issues? Ideas?
I have contacted the site and await their response.
Thank you.

on my fresh; sidenote: first; install of Arch (about 2 weeks ago, just before gimick ><) i had to update the firmware before the module would load properly.
# pacman -S ipw2200-fw
if you can't get on the internet from arch, here is a link to the package you can download it from windows then.
hope that helps you.
/jhs

Referencing / Note Taking

I am in consideration to purchasing an iPad but was wondering if anyone can shed some light on my concern.
I work and am going to school so I do a lot of reading/writing and business plans. A lot of the reading I do now needs highlighting, note taking, referencing, etc so that I can notes/documents of all the info from various books. Is there an option/app that I can do all the note taking/referencing directly in the ebook on the iPad then have it transfered/synced on to a PC/Mac?
Thanks for the help in advance.

Hi and welcome to Apple Discussions...
Best bet would be to check out the iPad app store in iTunes.
In the iTunes window click iPad. Then on the right click: Get Stuff Done
You may find an app rather then the ebook that conforms better to your needs.
Carolyn

PB not taking CD in

Please help ! My PB is all of a sudden not taking CD's in... I thought that a CD was in, but can't eject anything... Tried the restart holding the trackpad button, nothing ! It just won't let the CD go in. Any suggestions ? Thanks !

The exact same thing happened to me. Except, I forced a CD in and it got stuck... I had to get the optical drive replaced. Thank goodness it was still under warranty. I suggest you make an appointment with the Genius Bar. Good luck!

Links in my email are not opening in web browser. They are bringing the browser up, but not taking me to sites.

Links in my email are not opening in web browser. They are bringing the browser up, but not taking me to sites. What do I need to do?

Me too but it's happening on my iMac after I did a software update this morning which included fixes in Mail it said. My Mail was fine before the update!

HT6154 All of a sudden after taking a picture my phone will not swipe or unlock or power off.

All of a sudden after taking a photo, I locked my phone and now I can not swipe or power off or get into my phone!

Try a reset

Customizing CO class on site level is not taking effect

Hello,
I extended a CO class and changed the region "Controller Class" on Site level from "Inherit" to my newly created class
But the personalization is not taking effect when i run the page; any idea why?
thanks

Ash,
begin
jdr_utils.listcustomizations('your page path like /oracle/apps/pon/award/completion/webui/ponCompleteAward2PG');
end;
will give the personalization availble for your page, then get the details using,
begin
jdr_utils.printDocument('output of the above query');
end;
Make sure the above script is giving your controller in place and see what level your contoller is attached.
Thanks.
With Regards,
Kali.
OSSi.

Notes, taking notes, graphing, audio recordings, etc

Is there a good to great note taking app for mac os? Something that makes it easy to do quick graphs and record audio and add text notes with the keyboard... dream app for a student is what I'm after, and, no, Curio and Jarnal are not it. Thanks.

The Windows version of Office 2004 has this application called One Note. On the MacOSX Office 2004, you can open Word and switch to View / Notebook Layout, which is similar in functionality to One Note.
Then, there are apps from www.omnigroup.com They were once bundled with Tiger on Powerbooks (at least).
I hope this help.

Why would the Firewire Port and/or External DVD-RW suddenly not work?

Hi, it's me again. I swear, I must be destined to just use Windows machines...
Anyways, I have a used/refurbished iBook G3 500MHz 320MB RAM Dual USB (1 Firewire)laptop running OS 10.2.8 that I bought a few months ago. I went and purchased an external Firewire/USB 2.0 DVD-RW drive as I only had a CD-ROM drive on my machine and I wanted the option to burn CD's or watch/read data from DVD's (I know that with my slow processor writing DVD's -other than data- would be a stretch and have other machines to do that with anyways so it wasn't a concern really). I received it and installed it, also installed the free version of Toast that came with it, and the drive worked fine. I have not needed to use the drive since then and have not used the laptop much at all since then really, but I do need to say that I did end up adding a new user account, though I can't remember if I changed the original Admin account and then still have the one I created myself when I first started the laptop after I bought it (had a fresh install of Jaguar on it, but I have no disk to re-install with if needed) or if I created a separate (new) account and ended up deleting the Original Admin accout (I know in Windows, you cannot delete the original Admin account but I do not know if that is the same for OSX or not). I did this as I wanted a master Admin account that I just wouldn't really use and then wanted the other as my main account (and use it to connect to my home windows network) and for some reason it would not let me put a check in the box to allow that account to do so (from either Apple or my user accounts) and so I know that my main user account now is set up to allow it (was it the old Apple user account or a new one, I can't remember- sorry).
Ok, so that is the back story to my problem, which happens to be this:
I just bought a new chip of RAM (512MB to make it a machine with 576MB RAM total) and as I had been looking at getting OSX Tiger (but didn't want to do it without the extra ram and had been considering Panther instead as well), I thought it was necessary if I wanted to not bog down my machine. I bought the Install Disks on DVD for Panther, as well as an upgrade disk (DVD again) for Tiger, therefore letting me use the External Firewire DVD-RW to install Panther, and if I liked I could go ahead and upgrade to Tiger (and if I didn't like it too much, or it slowed things down too much etc, then I could always go back to panther and have both available for future options). The extra RAM coming in handy here definitely.
So I was going to install the RAM today, and decided to go ahead and test out the External DVD to make sure it could boot from it (before making any changes to my system) and then go and install the RAM, and after that, install Panther to start... But I plugged all the cords and cables in, used my laptop with AC power even, and I could not get the External to show up at all... (kinda like the very current post right below mine but for the G4- it worked before, but now the firewire External just does not show up).
I only have USB 1.1 on this laptop obviously, and I don't even know if you could do a boot from an external with USB 2.0 if my laptop had it (the DVD player does). I was recommended to boot with an external firewire DVD or firewire to another machine with DVD capabilities to do the install. So my problem right now is getting slightly bigger, as of course, I can't seem to momentarily find the stuff that came with the External (spare USB cable to check and see if the laptop will recognize it at least with that and to show it is the firewire that is not working properly, or the disk that I used to install it -might have been only used to install Toast free version if it didn't need any drivers, but I don't know where that or the instructions for installation sheet currently is -- I am looking for it, but I have switched bedrooms just last week and I also seem to be missing a few other Windows laptop disks as well so there is a good chance that they are all together, I just need to figure out where, heh.)
I am waiting currently before installing the memory, though if I don't get the External working tonight, I may go ahead and do it first as at least I will have more memory on my laptop then, until I can get other stuff functioning and be able to do the Panther install.
But my main question is, is there something that would cause an installed external to suddenly not show up in OSX? Since I hadn't used it since that one day, and it was unplugged from the laptop itself, would that end up doing it, or more likely, the changing of the user accounts (though I have been trying to test it with different types of media and through both of my user account (which are both "admin" ones), though I do still have one of those being an account that was on there when the External DVD was first installed, so it really shouldn't have done this at all (one would think). So how big of a chance is it that the firewire has somehow gone dead and this is the main culprit to my wasting the past 4 hours on this???
I am currently scavenging around for an extra USB cable to try and test the External that way and will post the results when I can... I love the look and idea of macs, now I have a mac and want to upgrade it even, but why is it that whenever I attempt to use it after having not used it for a bit (and try to make the iBook feel better by using it more as I am sure it feels sad and alone sitting on the shelf while my Windows Laptop gets more attention), or try to fix it when it can be made better (and therefore used more often), the mac (all macs really), just seem to get all pissy and cause problems and make me spend hours upon hours trying to get things to work again??? You have to admit it, I am "mac cursed"... sigh I can program in 4 or 5 computer languages and am very advanced at many tech things (the ones I am not as good at I am still usually Average or Medium skilled) so it makes me wonder why I have so many tech problems with Macs when they are supposed to be the "easy" OS to use...

Actually, I think I have it all working now. After going back to the Plextor Website, I found out that the switch between the USB and 1394 ports only gets activated (switched over to the other) with you turn the device off first, move the switch and then turn it back on. I was sure that I had done this with the ibook, but maybe not as when I went back and did it with first the USB and then the Firewire cables, it did work. I definitely knew that I had not done this with the Windows laptop, the reason it would not have the USB work for me on it.
but back to the iBook, I was confused as it was only showing up as a DVD-ROM (which I guess is what they do until you actually open up the burning software to then be able to burn to it), and it also had the wrong Model #, which after more research, showed that it was the Internal DVD drive model version (PX-708A) compared to the actual model version (PX-708UF) which is the USB/Firewire (External) model. The firmware was really out of date as well (from June 2004 I think, v1.06) and they had v1.12 from Spet/Oct 2006 available so I went to get that (which was a hassle). They had nice easy Windows self extractor/installer packs, and then the BIN files for use for all systems (Sun OS/ Mac OSX/ Mac OS/ Linux etc as well as usable for Windows), and those needed a special Firmware Updater Application which was OS specific. Only I had the hardest time trying to get the OSX one as it would send me to a FTP site and not give me any clues as to which file(s) I needed to get and the Mac OS version was just for older 9.2 or below versions and didn't want to install under the OS Classic mode.
I ended up using my windows computer which made it easier to view with the FTP stuff as I have FireFTP in Firefox, and downloaded the files I thought I needed (to test out), and then realized my silliness, and just downloaded (as well) the Windows Auto Extractor/Installer as the Firmware is the same for all OS's, just the way to install/update it was different... So I hooked the DVD drive to my PC and updated the firmware, checked it out on here before moving it back to the ibook, where I checked that it still worked and had the new update version showing, which it did, and now I have my fully working and newly updated drive ready for the OSX installations... I had attempted to update my Jaguar system as well while online, but it had no new updates available (I guess those were all mostly Tiger updates that were just recently released).
I am now off to install my additional RAM, and after checking that it all shows up correctly, I will go ahead and do the Panther Install (and test it out and see if I like it or not).
For anyone that currently uses Panther on any mac, are there still any major problems I should know about before hand, or know about things that they have mostly fixed (like the issues with Firewire ports and External Drives that they had around the time Panther was first released for example)???
Thanks to all that helped... I now know to attempt an "eject" of any external HD (which I do have one that I will setup to use after I get Panther on the ibook) or CD/DVD drive instead of just unplugging the USB/Firewire cable.

Can Someone PLEASE Tell Me Why My Muse Site Will Not Work Upon HTML Export?

Sorry for the long title!
I've had a few threads going regarding troubles with my Muse site. These issues have been on-going, and once I was no longer able to upload to Fetch—and had to export to html via FileZilla—it just seems the problems continue to snowball.
I have a web site. I will disclose the URL here now: www.jamescdarling.com
When this site was html-based (its original form), using my yahoo small business web host and Fetch, it worked like a charm. All Flash files functioned at 100%, embedded videos/players all played great, etc. Then, I switched over to Muse 1.) because I was excited by the potential, and 2.) I wanted to re-design my site, anyway.
So, I created my site in Muse, and uploaded it all into Fetch. I soon found that some of my Flash files and videos were not working. This was the case for a long time. I finally gave up after trying everything and asking lots of questions here.
Just recently, I set out to fix these issues as I was afraid this half-assed site would appear to make me look unprofessional and like I had no idea how to use Flash. I had some problems with the new Muse Update (had to ditch Fetch and use "export with html" using FileZlilla). Changes made to my Muse file were not taking... and each time I viewed my updated site, the updates were not there—it still looked like the previous incarnation of the site. However, with some help from some of the good folks here, I was able to make my site not only update, but work nearly perfectly—or so I thought!
I just clicked on my personal web site URL link in my LinkedIn page, and I see the old-looking site! The bookmark I have of my site is near-perfect—only the videos still will not load. However, it would seem that my site only functions as well as it does on MY computer only—that is, URL's I have been sending out probably are of the old non-functioning site? The changes I make are not being recognized.
If you will, click on my above URL (in bold)..... If you click on "Resume", you should see light blue rules separating each section. But I bet you will see heavier gray bars with headers inside them. Also, if you view my Flash work, go to the "Epiphone Casino Mini Site".... the "Finshes" and "Features" pages' interactive elements will not function as they should (never mind the video page!)—but they work perfectly when accessing my site from my bookmark on my computer.
Can someone please tell me how to make my site update web-wide, and how to get my Flash files to function?
Thanks!!!
Message was edited by: darling67

It seams a lot of folks are haveing issues with FTP upload. Try these areas to look at. Maybe the right answer. I dont use Flash on my sites for a long time now. Anyhow, check these out.
http://tv.adobe.com/watch/muse-feature-tour/adobe-muse-publishing-and-managing-your-site/
http://www.adobekb.com/using_3rdparty_ftp.html#usingftp-understandinghowftpworks

AppleTv2: HDCP suddenly not working on netflix after update

I have had a working AppleTV2 for about a year and have been using netflix to stream movies. After most recent update I can no longer stream due to HDCP error. There are been no changes to the hardware (cables, TV, power, etc.) This can only point to the update. I tried to do a restore from Mac to the most recent update. I took it into the genius bar and they tried to do the same thing. No change, they only offer the $69 Service replacement. I have tried changing the outputs, the hdmi cable and powering up in a certain manner. None of these work? Why is this suddenly not working?
Thanks for any help.

Interesting (albeit, odd) addition to this issue --
on my work system (dual G5, decked out, 23" Cinema), the same issue started to happen after the QT upgrade... however in my situation, the movie would load, but then just sit there, frozen.
The first time I saw this, I started to move my mouse across the web page, and noticed that every time the pointer would roll over a URL link or any other rollover type of object within the browser window (e.g., a link or even a tab or bookmark shortcut in the Safari toolbar) the movie would suddenly start and stop, but just for a fraction of a second. But yet, if I just leave my mouse sitting on top of the URL or rollover object, it does nothing. It appears to be directly related to the action of roll-on or roll-out from other objects on the page, or within the overall window.
So basically, if I take my mouse and move it ridiculously fast back and forth over any one of these rollover items, the movie will play for a fraction of a second each time the pointer passes over the object and makes it highlight... something to the effect of watching a flip-book animation that stutters along.
Very bizarre -- not sure what happened with the update, but hoping that there is a patch released soon. It would appear that it's conflicting with other objects within the window, or it's waiting for some action on another rollover-type of item that is loaded within the overall window.
G4 Cube Mac OS X (10.4) Maxxed out.

Mail suddenly not being received from server. The ISP tells me there's nothing wrong at his end. I can see emails on the server if I look up WebMail; they don't come into Mail. I haven't changed anything lately.

Mail suddenly not being received from server. The ISP tells me there's nothing wrong at his end. I can see emails on the server if I look up WebMail; they don't come into Mail. I haven't changed anything lately. The incoming server details haven't changed; the Connection Doctor shows the accounts are connected; I've turned everything off including the modern. Have exhausted my limited knowledge. Anyone with something similar?

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

Why does Acrobat suddenly not work on my Mac (won't open pdf files from a web page), yet I can open them from my iPhone? Everything worked fine yesteray.

Hello:
I have a Mac running OS 10.8.5 and I use Acrobat Pro and Acrobat Reader. Today for some reason, any time I try and access a pdf file from a web page, it won't open. I get a blank window. PDF files already on my computer open fine and I can create PDF files from Word docs, but I can't download or view any pdf file from any web page. Strangely, PDF files on web pages open just fine on my iPhone.
I checked that both my copy of Acrobat Pro and Acrobat Reader are up-to-date. They are.
I checked that my copy of Firefox is up-to-date. It is. And nothing changed with Firefox within the last 24 hours.
I am a humble computer end-user. I am baffled as to why this would suddenly not work. I have not changed any settings, etc. Any help or suggestions would be greatly appreciated.

Thank you.
I checked your instructions you sent and as far as I can tell all of my settings, etc for Firefox (plugin updates and preferences) are correct but I am having the same problem.
However, everything works in Safari. I don't have time to attempt to diagnose why Firefox no longer works. I will just switch to Safari.
Many thanks.
Charles
Charles Deister
(503) 949-5762
[email protected]<applewebdata://81CB4171-226F-49DF-BD59-A38A7360B3FB/[email protected]>
PO Box 5032
Salem, OR 97304
http://www.pilotstrat.com<http://www.pilotstrat.com/>
This transmission (including any attachments) may contain confidential information, privileged material, or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful.

Looking for note taking software to use with a graphics tablet

Hello folks,
I am trying to find a software that would allow me to interchangably use typing and writing/drawing on a graphics tablet smoothly.
I'm looking for something that would essentially provide a 'blank sheet of lined-paper' where i can quickly type what my professors are saying, as well as easily draw whatever they are drawing. Also, since I am studying engineering, I would need something that I can easily write math symbols and equations so I can use it as scratch paper.
At the same time, I am looking to save trees and money, as well as keep organized and simplicity when it comes to archiving.
I have tried Microsoft Word 2008's notebook view, and this is currently the closest thing to what I want, but it favors mostly the text side of what I want (of course), and isn't very good in the drawing part. It also isn't very smooth when I try to do practice math/physics/engineering problems on it, nor is it very good at drawing molecular structures (O-Chem)... but for the most part, it gets the job done. It is also a headache because when you zoom in a lot to make it easier to write (mind you, I am using a tiny macbook screen..), the title bar also zooms in, and ends up taking half of the screen, making zooming in practically useless. (the title bar is also locked, so even as you scroll down, it stays in the top half.)
I have also tried Adobe Acrobat Professional 7, where I simply made a blank notebook from some image online, and I use it as scratch paper. When it comes to drawing, it is very smooth, but it's a headache sometimes, because after writing something and pausing for a second or two, the pen tool automatically becomes a 'selector' tool, and so if i want to draw over what I previously wrote, it changes to selector and instead of writing over, it drags and drops the object around a bit. The tolerance for that is really high too, and i'd have to bring the pointer about half an inch or so before I can start writing something again. I also haven't given the text a try yet, but it lets me make collapseable text boxes, so that is good for further annotating my equations and drawings, but isn't very useful for a full-lecture class (i.e. biology)
I also don't even want to consider photoshop, because it's basically too powerful, and I don't want my laptop fans going off in-class (its SUPER loud when it happens...) and I need it to last the day.
So just a sum up:
I'm looking for a good note-taking software (for mac) that will allow me to smoothly use my graphics tablet AND be able to type.
MS Word '08 and Adobe Acrobat are close... but aren't quite to what I want exactly...
I have a Wacom Bamboo tablet and an '09 Intel-based MacBook.
Thank you in advance!

I have had this same issue and found this program called NoteBook that allows you to type, and draw (write) notes on a variety of paper types, (lined, graphing, engineering,etc.) and it uses the .nb file type that allows you to save multiple "pages" inside one file in a sort-of "notebook" if you will. It works great, but has several minor disadvantages. I can't change the ink color, I can't change the tip thickness (other than the pressure sensitive option with my wacom graphics tablet), and it doesn't allow you to open pdfs or other documents to inscribe upon. All around though it has been wonderful. There are really no good note taking apps out there...

Site suddenly not taking passcode etc

Similar Messages

Maybe you are looking for