Site to site VPN timing out

I have a printer as the sole client on one end of a site-to-site VPN, and the tunnel times out. There is no ability to generate traffic from the printer, so I am looking for anyone that may have a solution to this problem.
Printer end - ASA5505
Other end - Cisco VPN router.
TIA !!
Dave

Hi Dave,
You can try enabling IKE DPD deap peer detection (Keepalives ) on the router , in ASA is enable by default , Im not sure on the routers. This feature must be enable on both ends to work.
Isakmp keepalive
http://www.cisco.com/en/US/partner/products/ps6120/products_tech_note09186a00807e0aca.shtml#solution07
http://www.cisco.com/en/US/partner/docs/security/asa/asa80/command/reference/i3.html#wp1842584
If the above does not do the trick you could try to snmp monitor the printer fomr the far end , if you have a snmp network monitoring tools such as Network Performance monitor or others out there , and the printer supports SNMP you could setup snmp monitoring . The snmp monitoring tool pools regulartly from the device on its status thus maintaining your L2L tunnel up at all times while the printer is iddle.
Regards

Similar Messages

Every time I try to open my TD Bank site I get a "timed out" message. This is the only site where this happens. Why?

I have been in touch with the bank support and they had me change the proxy setting and this helped once and then the problem returned.
I have gone paperless and I need to access these sites to run my business.
I work on a Toshiba laptop using Vista. This problem has only occurred in the last couple of months and I have been using this banking site for a few years.
Help - I am frustrated and I am NOT a computer whiz

See:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
* [[Options window - Advanced panel#General_tab]]
See also: http://kb.mozillazine.org/accessibility.blockautorefresh

30EA1 Dead UI on timed-out connection

This version still has 2.11's "dead UI" behavior on a closed- or timed-out connection to the Oracle database.
I contend that fixing this behavior is more important than any new feature work. It's bad to waste a person's time, and that's what this behavior does. I'd guess recovery from a timed-out connection I just had took seven minutes.
Heaven forbid I should have to make coffee... ;-)

What HWHC said.
Environment:
* Mac OS X 10.6.4.
* SSL VPN over my cable modem to our campus network
* Oracle 11R2 on SuSE
* Connections panel is not "pinned," that is, I summon it by clicking a tab to the left of SD's window.
There are two, maybe three bad UI behaviors related to connectivity:
* Dead UI (this thread): lost connection, time-out, lost network or VPN timed out. 2.11, 3.0EA1.
I simulated this scenario last night by:
- Authenticate to the DB.
- Open a package declaration.
- Leave SD untouched until this morning (required wait time is much less than overnight).
- At 6:36 this morning, close the editor window.
- Summon the Connections panel (which still had the connection's schema open).
- Click the connection name.
- The UI froze: the esc key did not dismiss the Connections panel, no clicks were accepted, clicks in SD's menu changed the cursor to the beachball.
- Do other work. At 6:44 I saw the connections panel finally close, and from then on I could work with it.
If you have time, you switch to another task; if you don't, you use OS X's Force Quit, like HWHC says, and potentially lose work. That's data loss.
Someone was so troubled by this behavior that s/he wrote a "keep alive" plugin. Obviously it's a risk to install a bit of code not vetted by Oracle, so I haven't tried the plugin. Clearly this isn't a rare phenomenon.
* Bonking SQL editor in 30EA1, maybe 2.11:
- Open connection
- Open a package
- Leave SD alone for maybe 10, 15 minutes.
- Then navigate the open package. Attempts to type produce a "bonk" sound -- on the Mac, meaning "No."
- Oddly, I can open other packages but still experience the bonk behavior.
* Smaller annoyance in 2.11, 30EA1: Connections panel schema tree and its context menu get out of sync about connection status. An idled connection name might not offer a Disconnect menu option until you click another connection, then click again the active connection to get the disconnect option.

Urgent - Site to Site VPN - sequence of reply and timed out

We have a Site to Site VPN with another company that hosts an application server. If I setup a ping -r from my windows computer to their server i will received about 150 successful ping replies then 13 request timed out and this repeats endlessly. We have both triple checked our settings and are not aware of any changes at either end that was made.
Any help in troubleshooting would be greatly appreciated.
Thanks
We have an ASA5505 and they have a Palo Alto product.

thanks for the two replies. Our ASA5505 does have a IPS module -
ASA 5500 Series AIP Security Services Card-5 ASA-SSC-AIP-5 but I have turned it off . This peer has two subnets and we have the issue pinging to hosts in both the subnets. The main issue is when we are connected to the application on their end we get disconnected after two minutes, the ping i am using as a test which validates we are having packet loss.
debug crypto isakmp 255 & debug crypto ipsec 255 show no issues and in adsm i select monitoring , logging debug and view i don't see anything specific blocking traffic when the pings time out.
any other ideas/suggestions appreciated!
thanks

I love the way that FireFox works on other sites and even the speed on other places on Facebook. However even though I think I've got the latest update I still get timed out messages when working in Farm Town. My questions is, are those updates I'm gett

I keep getting timed out of server notice after I open a facility and then go to the next facility. It will also time out when working on the fields such as plowing on a friends farm, or planting on my own.
== URL of affected sites ==
http://http://apps.facebook.com/farmtown/play/?rcid=gift&type=4F&from_uid=1409103345&from_name=Billie%20Sue&time=1278961194&gift_sig=7dbaf41839bdd3ddd66e59be3e1a6166&cid=send_gift

Some Flash-based games can take more time than to load, so you may have to increase the timeout on crash protection. See [[The Adobe Flash plugin has crashed]].

I cannot search for anything in firefox or yahoo, it just keeps saying that the site is timed out....I can go to all bookmarked pages but unable to search for anything new

I cannot do any searching....I have reset my system to no proxy but still get the message that the site has timed out and I get no results in either firefox or yahoo.....I can go to bookmarked sites but that is it.

I cannot do any searching....I have reset my system to no proxy but still get the message that the site has timed out and I get no results in either firefox or yahoo.....I can go to bookmarked sites but that is it.

Usingbestanonymousbrowser,all web sites"take too long, or timed out"

dear friends, have ff 4 beta, as defalt browser.windows 7 prem 64 bit.dial up connection.mcafee security center.ff and best anonymousbrowser, are given full program access through mcafee security.only when trying to use best anonymousbrowser, ff will load best anonymousbrowser home page.not load any web sites.always says"the connection has timed out, or taking too long to load"ff has two listings, in the program access.have tried several proxy setting, in the ff tool section.cannot see any differences.

this works if using xp firefox internet explorer ect click the start button control panel internet options advanced tab click on the RESET tab when box opens click on reset if another box opens or you get message to reset all RESET these by clicking RESET button
do the same in WINDOWS 7 open internet explorer and go to tools and then internet options advanced tab click on the RESET tab when box opens click on reset if another box opens or you get message to reset all RESET these by clicking RESET button

Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occationally. Can we stop Firefox from timing out?

Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occasionally. Can we stop Firefox from timing out? edit

Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

RDWeb Site Timing Out Seemingly Random

We have a local cloud environemt the three session hosts, two gateways, and three connection brokers for all sorts of load balance and fail resistance. We have a rather annoying random problem that is plaguing our end users.
The RDweb site is timing out at random intervals, some within 5 minutes and others with multiple hours. I have gone into IIS and set the timeout for both private and public to six hours but still some are timing out short. I have also set the sessions to
never end unless they are idle for 6 hours as well. Any ideas on a setting I overlooked?
I also looked at the gateway and make sure the Authorization polices were set to 6 hours as well for idle sessions.
Server 2012 on all machines.

Hi Matthew,
Thank you for posting in Windows Server Forum.
From when you are facing this issue?
Is there any latest update which you have done?
If that’s the case, then please restart the server for proper working.
Have you find any related Event log on the server side when this issue happens? If so, please let’s know the detail including the Event ID.
Please enable RD Keep Alives on your server and then restart it. To do this logon to the server as an admin, Start-Run-gpedit.msc, in the left pane navigate to the following:
Computer Policy\Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Connections
Configure keep-alive connection interval, select
Enabled, change the Keep-Alive interval to 2 and Restart your server. After this check the connection and verify whether there is any difference.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

The connection has timed out with certain sites on all browsers

When I type in google.ca or bing.com in my address bar, it says " The connection has timed out. The server at bing.com is taking too long to respond." i have done may virus scans and that has not worked. This happens in all brosers and i am using windows XP. I am mainly using FireFox 3.6. My friends can access the sites and seem like i am the only one with the problem.
== URL of affected sites ==
http://bing.com
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefo8769 79680741803 (.NET CLR 3.5.30729)

Only on some sites.
Really weird thing is, Internet Explorer works FINE!!!

Connection has timed out on my mac. I think my e-commerce site has been hack

It is really slow I get the same message for both. I own a Mac and have never had to change settings before like a firewall or connection issue. I can connect to any site accept my very own. Is this the work of a hacker?

Temporarily disabling the Anti-Virus/Firewall software on the computer should rectify the network connect timed out issue.

One of my bookmarks i cant get into using the user name and password alli get is the page timed out but i can get into the site by using internet explorer

When I try to get in the site all I get is session is timed out. How can i correct this

Try to navigate to that page starting with its home page in case you are using a bookmark.
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

When i attempt to log on to my college site i keep getting The connection has timed out. Is there a way of changing the time setting , to fix this?

This message "The connection has timed out" only happens when i attempt to log on to my blackboard account for college. All other log in' work fine.

Thanks. So there's no means of knowing whether a text message has been delivered, not to mention time of delivery. Perhaps I've gone for the wrong phone. It might do a lot but seems to miss out on some basics.

Connection timed out. I tryed all the forums and help sites to change settings and firewall's

Connection timed out. I tryed all the frums suggestions chaged proxy to auto. And others, and closed windows firewall, still says connection timed out. IE works. Still cant get firefox to work.
== This happened ==
Every time Firefox opened
== after update 3.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than Network connectivity tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

SharePoint Site Very Slow and some time Request Timed Out

Hi All
I have many Web Application is running in SharePoint Farm. Since yesterday one of the web application started responding very slow. It takes 5 to 6 mins to load the page. Some time i received request timed out error message. But all other web applications
are working good.
I increased executionTimeout value, stall it slow / not responding.
Please let us know if you have come across this issues or any suggestion from your end to resolve this issue.
Thanks in Advance - Guru
Cheers, Guruprasad

i would recommend enable the developer dashboard on the web app and check which task is consuming the more time i.e. webpart, query to database etc.
also any change to web app since the issue started, any new webpart added to the page, any solution deployed or something else.
also did you try to recycle the app pool of the web applications?
how many wfe in the farm?
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Site to site VPN timing out

Similar Messages

Maybe you are looking for