Situation in Storage Location Determination with Situation?

where can I use the situation values to determine the Storage Location?
In other words, how can I determine the Storage Location with the settings in Storage Location Determination with Situation?

Dear Huanzhiyu,
Go through this IMG path you can able to define the situations as well as you can able to determine the storage location with the situation.
IMG>Logistics Execution>Shipping>Picking>determine picking location-->Define situations and Storage location determination with situation.
I hope it will help you
Regards,
Murali.

Similar Messages

Picking Location Determination with Situation

Dear all,
I have configured my Picking/Storage Location Determination:
/Transaction nolml / shipping / picking / determine picking location / storage location determination with situation.
Sitution: 21 (remove from stock standard),Storage Condition: nothing, SLoc: my SLoc How/ where do I use situation 21? Situation is part of what?
thanks much.
Nick

check in MM , mrp

Situation in Storage Location Determination

Hai,
I have a scenario where I have to determine a different storage location based on the sales doc type. On searching the forum here I learnt that I should use USER EXIT to achieve this.
I want to know whether I can use situations to handle this scenario.
I am able to define situations. But where can I assign these situations? In SO or Delivery document?
Will be thankful if anybody helps me out in this issue regarding the 'situation'
Regards,
Maheshwaran. I

Hi
Storage Locations are Determined in the delivery document based on The priority rules like MALA or RETA or MARE
Here the RETA rule is Storage Location Determination determination based on shipping pt + delivering plant and Situation
The difference between MALA and RETA is these two are same (shipping pt + delivering plant)
MALA uses storage conditions as the third factor
RETA uses situation as the third factor
RETA is used in trading scenario
But both of these are used or assigned to delivery types only via t code OVLQ
So using situation will not help you to Determine Storage Location in sales doc type
Storage location is normally not determined in sales order
It is determined only in delivery
If you want storage location to be determined for sales order then you have to use user exit
If storage location is specified manually in sales order then it is copied into delivery
Otherwise it is determined using either MALA,RETA or MARE rules which we specify in delivery doc type
For sales order you have to use usetr exit in program MV45AFZZ
To determine storage location in Sale Order, there is no configuration available and it has to be achieved using exit USEREXIT_SOURCE_DETERMINATION in program MV45AFZB.
Maintain a zee table with the values based on which you want the storage location determination to happen. In the exit ask your abaper to write the code to pick up the relevant records based on the criterion and then fetch the storage location. This way storage location will be automatically populated in the sale order.
You can try incompletion procedure option
Put the storage location field in the sales order item incompletion procedure
Regards
Raja

Storage location determination with MRP

Hi GURUu2019s,
I need to know what set up decides which Storage location is used for MRP if there is more than one storage location per plant.
Please guide me.
Cheers,
Kumar.S

Dear
Pleaae do the following :
1.Check in OMIR keep the indicator as Blank (IMG-Production-MRP-Planning-Define Storage Location MRP per Plant-It should not be 1 OR 2 .
2.Make sure that materials in those storage loaction should not have indicator 1/2 in MRP4 view .
Bssically , you do nto need to change any configuration setup in case because it will by defalut as Blnak in OMIR -means all the materials in varioaus storage location are MRP relevent .Those storage location should be under plant which hase activated for MRP (spro-mrp-activate MRP for Plant )
Hope this helps
Regards
JH

Shipping point and storage location determination

for one of my delivery type i had defined shipping point determination as per following.
define shipping conditions
define loading group
assign shipping points: with combination of shipping conditionsloading groupplantprop shippping pointmanual shiping point.
i also checked the cmr and mmr both are correct.still system is not proposing shipping point and storage locatgion in my obd

Hi Charan
Shipping conditions is taken from sold to party
Pls check whether you are using a different SP and SH
Check in these t codes
In OVL2 are you seeing the shipping pt determination for your combination?
In OVL3 are you seeing the storage location determination for your combination?
If yes then shipping pt will be definately picked up in sales order
Storage location will be definately picked up in the delivery if you have assigned the rule MALA in OVLK
Have you assigned your delivering plant to your shipping pt in enterprise structure assignment?
This also check
Refresh the whole order and try again
If need be log out of SAP and relog and see provided you have youR OVL2 and OVL3 correct?
Note If shipping conditions are assigned to your order type in VOV8 then that will have priority over the shipping conditions of SP
So for that combination you should maintain shipping pt in OVL2
Regards
Raja

Storage location-determination of return-deliveries (delivery type RL)

Is there a difference between picking storage location-determination of return-deliveries (delivery type u201CRL Returns (pur.ord.)u201D/return to vendor) on 4.6C compared to ECC6.0? Is there a SAP-note?
Within 4.6C-system the storage location is determined based on the customizing settings (Logistics Execution \ Shipping \ Picking \ Determine Picking Location \Assign Picking Locations).
Within ECC6.0-system the storage location in the return-delivery is always the storage location that is entered in the Return-Purchase Order. It seems like the customizing-settings are no longer beeing taken into account.

This storace location-determination of return-deliveries (delivery type RL) in customozing that you mention is only true within the 4.6C-system. Within the ECC6.0-system the storage lcoation is always the one that is entered in the return-purchase order. In ECC6.0 the customizing settings you are refering to a no longer valid for deliveries with delivery type RL.
The questions is why/ and is there an OSS note.

Finding Plants\Storage locations associated with the Routes

Hi,
I need to find all possible Plants/Storage Locations associated with the Route in hand.(These routes can be found in TVRAB table).Is there any mapping done in SAP between Routes and Plants or Routes and Departure Points ?
If anyone has any inputs regarding this, it will be really helpful.

Hi,
To determine the route we need to know the Plant and the Shipping point or connection point/port.
I think we can find the routes in table TVRO or VBLK.
and for route descirption we go for the TVROT
First check the tables for the Plant and shipping point then we can link to the route.
Pls check this link
http://help.sap.com/saphelp_47x200/helpdata/en/dd/560dee545a11d1a7020000e829fd11/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/17/c0b758903111d2b42f006094b9b9a0/content.htm
Regards
Lekha

Storage location determination at Sales Order

Dear All,
Could we storage location determine at sales order level ?
As per my requirement. Stock is available a particular plant example below
Plant
Storage Loc
Stock Available
Batch
1305
1300
10
1000190
1305
1300
10
1000890
Got order from customer is 15 Quantities and the sale order is confirmed because stock is available but at the time of delivery storage location is determined on the particular material so batch is picked automatically on base quantity other other is showing open. So could u plz give me solution for storage location determination on sales order level.
Thank You!
Chakradhara

Being an old member of the forum, I dont want to highlight the importance of adhering to forum rules. This topic has been discussed many times here and if you search in SCN or Google it, you would accept this has been discussed many times. Please adhere to forum rules and avoid posting such repeated queries.
G. Lakshmipathi

Plant and Storage Location determination at Item level during Copy control

Hello Freinds,
We are experiencing issues within Sales Order creation when the line item is referencing a contract. The plant and storage location is being determined from the contract - this should not be done, we have an enhancement in place for sales order plant/storage location determination which is how these values should be determined.
Kindly suggest, if it can be achieved through configuration setting at Copy control level, to avoid the Plant and Storage location determination from Contract in to Sales Order.
Thanks,
Anup Bansal

Hello
You can mention the additional logic of redetermining Plant and storage location whenever copied from contract.
In a sale order, i think you are maintaining a enhancement in prog MV45AFZB & user exit userexit_source_determination.
YOu can maintain the coding at same place.
thank you
Anirudh

SHIPPING POINT AND STORAGE LOCATION DETERMINATION IN DELIVERY

i made configuration setting for shipping point and storage location determination during delivery process. still system is not proposing this data during delivery.
due to this reason lot of time is consuming during delivery creation.
plz suggest the complete configuration flow for this determination.

Dear Ram,
Can you please specify the configuration that you have made? And which storage location determination rule are you using for your Delivery Type?
Regards,
Amitabha

Movement Type 340 doesn't have Storage Location Associated with it

When a batch is given a new valuation type, there is no storage location associated with that movement, because the movement would be for the entire batch obviuosly. In BI though, that creates a problem, because the movement needs to have a storage location assigned to it. Here is an example of the problem:
Storage Location----Batch--Xbuy Current Stock-----Cert Current Stock
..........0001...................122....................100......................................0
Then batch 122 is moved from xbuy to cert. But, since there is no storage location associated with that movement, the current stock now looks like this:
Storage Location----Batch--Xbuy Current Stock-----Cert Current Stock
............#.......................122...................-100...................................100
..........0001...................122....................100......................................0
But it should look like this:
Storage Location----Batch--Xbuy Current Stock-----Cert Current Stock
..........0001...................122......................0......................................100
We are using the standard SAP Extractor for this inventory model, and I am curious as to whether there is a fix to this out there, or how we should go about fixing it?
Thanks,
Owen

The problem I am having is kind of a display and a data issue. All the data from the source system is coming over to BI in this case, but the problem is that the two systems are fundamentally different. In ECC, a batch can change from one valuation type to another with no thought to storage location, and that works just fine. However, when that same record is in BI, if it doesn't have a value for every characteristic in the model (including storage location in this case), then the ad-hoc report won't drill down correctly.
To answer your options:
1. We don't have the option of just not showing storage location, because this problem would render storage location useless because of data inconsistencies, and storage locations are an important part of our business.
2. We have several storage locations, so this will not work either.
Also, since we have several different storage locations we use, there is no way to just assign storage location 0001 to every empty record. However, I am thinking of a solution along these lines. If there was somewhere we could go to see the storage location of the particular batch, then we could fill the storage location at the time of the data load. The problem we would need to overcome though is timing. How do we do this for historical data that has moved storage locations? What if the movement goes to the delta queue, and then the storage location changes?
Thanks,
Owen

Storage Location Determination rule

Hi Gurus
Please i want to add a new storage location determination rule (ZALA) to the existing MALA, RETA & MARE. I'll appreciate if you can give me the menu path.
Many thanks, Felix

Hello Felix,
Please refer to SAP Note 124041 regarding the user exit for storage location. The function EXIT_SAPLV02V_002 is called by the function SD_STORAGE_LOCATION_DETERMINE.
Userexit EXIT_SAPLV02V_002 should always be called under the following
conditions:
a) there is no storage location present in the preceeding document
b) the delivery item is in creation (not change)
c) the rule for the for the storage location determination is not a
standard one (transaction OVLQ).
In addition I would also suggest you to go through SAP Note 396480.
Hope this helps.

User exit for storage location determination in sales order

Hi SAP SD Experts,
Please give me the exact user exit name where we can use for the automatic storage location determination in the sales order.
Thanks & Regards,
Rajesh Kumar Raju,

Dear Rajesh Kumar Raju
Go to IMG-->Logistics Execution >Shipping> Picking -->Determine Picking Location -->Define Rules for Picking Location Determination. There you have to assign the MALA rule to your delivery type
Also maintain in OMJ8 and in material master under MRP2 view the default storage location in the field "Prod. stor. location"
thanks
G. Lakshmipathi

Automatic storage location determination based on delivery document type

Dear All,
How can automatic storage location will be determined based on sales order type or delivery type.
Ex: If the business sells the material storage location automatically determined as SL12.
If the customer returnns the material storage location should be SL01.
Please suggest for retun process automatic storage location determination.
Best regards,
Ramesh

Dear Guru Lakshmipathy,
Fine, but we have some picking rules are MALA, RETA and MARE.
Currently we have onle on plant 1010 and shipping point 1010.
storage location for outbound deliveries determined based on MALA rule has been assigned to LF.
can we use RETA or MARE to determine the storage location for returns delivery. If yes kindly
explain. And where is storage condtion available in sap.
Best regards,
Thanks

Stock Transport order issueing storage location determination

Folks,
In case of a Stock transport order scenario in which plant A with SLOC1 delivery to plant B with SLOC 2. Is there any option how the issueing storage location can be determined? The delivering plant can be determined through the special procurement key but there is no option for the issueing SLOC.
Regards,
MdZ

Hey Karen!
I am not sure if I understand your problem correctly.
You do not want the system to create a new MARD entry when postin goods issue.
You can enable/ disable this function with transaction OMB3 in the customizing.
have fun
Flo

Situation in Storage Location Determination with Situation?

Similar Messages

Maybe you are looking for