Size category while creating a ztable

Hi,
I had created a ZTABLE with Size category(Technical Settings) as 1 which has a capacity of 1,400 to ,5700.
Just in case at a later date if the no.fo records gets increased will the system take care of the size category by itself
or it has to  be changed again.
Thanks,
K.Kiran

if you know that this may be increased, better define it as a greater value range.
but any ways.
The size category determines the probable space requirement for a table in the database.
You can select the categories 0 to 4 for your table. Each category is assigned a specific fixed storage area value in the database.
When you create a table, initial space is saved for it in the database. If more space is required later as a result of data that has been
entered, the storage space is increased in accordance with the category selected.

Similar Messages

  • Error message while creating a ztable

    Hi,
    I am trying to create a ztable with 2 fileds mandt and age-which is user created dataelement and domain and now when i am  trying to activate the table i get  warning "Enhancement category for table missing"
    "Enhancement category for Include or sub type missing "
    what could be the reason for these Warning
    Thanks
    Priya

    Hi Priya,
    In SE11, you can find in EXTRAS-> ENHANCEMENT CATEGORY, there you need to set the type of the enhancement category, and then click COPY.
    You can select CAN BE ENHANCED(DEEP), in general.
    Hope this is helpful to you. If you need further information, revert back.
    Reward all the helpful answers.
    Regards
    Nagaraj T

  • Page size problem while creating character mode report

    Hi All,
    I've designed a report in character based layout design. The report needs to be loaded into NOTEPAD and then EXCEL sheet. I need maximum page width for this report. I kept page size of width 23" in layout design and pulled the fields so that to get maximum room. When I run the report and load it into NOTEPAD, I don't see the page width, meaning that it gives me normal 140 column size which is of course not what want.
    Please can someone provide some assistance in this scnario.
    Thanks - Zahir

    The character mode and bitmapped page sizes are different, and independant of each other.
    For character mode you need to set the width in the following places:
    1) In the appropriate layout section property palette (assuming you're on 6.0 or above).
    2) In the .prt file that you're referencing in desformat to produce the output.
    If you set the width in both these places to the size you want you should be okay.
    Alternatively, you may want to look at the delimited format to generate output for spreadsheets.
    Hope this helps,
    Danny

  • Size category in technical settings while creating database table

    Hi all,
    I am creating custom table in ABAP dictionary, while allocating size category in technical settings F4 help values are not coming.i am entering 0,but number of records expected range is not coming.i searched across SDN but couldn't find  anything related to it.
    Thanks in advance.
    Sheela Patil
    Edited by: Sheela Patil on Oct 4, 2011 7:21 PM

    Hi
    Check it properly it will dispaly the size ranges on clicking F4 button.
    In this format it will display on clicking F4 button on size category field.
    SzCat Number of data records of table expected
    0                0 to         4,800
    1            4,800 to        19,000
    2           19,000 to        76,000
    3           76,000 to       300,000
    4          300,000 to     1,200,000
    5        1,200,000 to     2,400,000
    6        2,400,000 to     4,900,000
    7        4,900,000 to     9,800,000
    8        9,800,000 to    19,000,000
    I hope it is solved for you.

  • Erro occured while creating ztable

    Hi gurus,
    I created one ztable . while I am activating this table .it is showing below mentioned warning
    I don't know how to solve this please any boy knows give me the answer
       TABL ZKMATL_PLANNING activated
      Check table ZKMATL_PLANNING (SACHINS/29.08.07/14:01)
      Enhancement category for table missing
      Enhancement category for include or subtype missing
      Table ZKMATL_PLANNING was checked with warnings
    Regards,
    Shashikumar.G

    Hi Shashi,
    Lets consider a case where you define your custom table as maintainence not possible, then this table cannot be modified any body. In such cases the enhancement category plays a vital role. You can maintain the enhancement category by GO->MAINTAIN ENHANCEMENT CATEGORY in tcode se11 and define your settings.
    Generally, they are defined as no enhancement category.
    Hope this serves purpose.

  • Index: 0, Size: 0 error while creating data template in BI Publisher

    Hi
    When i am trying to create the data template for BI Publisher reporting. i am gettinhg the Index: 0, Size: 0
    error. I checked the query that i have used to create template and it is working fine. But not sure why it is not happening while creating the data template. Can anybody help me out please.

    how about pasting the content of your data template here, so that forum members can see what could be the problem.

  • How to customize Category and Category items list while creating New Model

    Hi,
    what the most convenient way to customize the Category and Category items list while creating New Model?
    This is standard:
    Now, what we want to achieve, is to customize this menu, to:
    1. Display in the Category window only f.e. two categories:
    - EA Diagrams
    - BPM Diagrams
    2. In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available. Additionally, it should behave like a hierarchy ... meaning you can create the second diagram, only as child (related diagram) of the first diagram etc.
    I know, excluding the particular diagrams/diagram elements can be configured using the right/profile settings, but how to:
    1. Customize the standard New Model menu window
    2. Create copies of City Planning Diagrams with different set-ups
    3. Set the relationship between diagrams
    Is such a configuration change possible?
    Thanks a lot for your help!
    Regards,
    Rafal

    Now, what we want to achieve, is to customize this menu, to:
    Question #1. Display in the Category window only f.e. two categories:
    - EA Diagrams
    - BPM Diagrams
    Click on Tools => General Options=> Model Creation
    Click on Properties => at right of Default category set
    Note : Model template does not work as Category. We can't set. An enchancement request has been open to SAP
    In the following example I defined a new default (MyNewDefault.mcc). As you can see only BPMN models are available.
    To create a new category set with BPMN choice
    a) Copy default.mcc in MyNewDefault.mcc file.
        Go to Tools=>General Options=>Model Creation : Select your new category
        Go to Tools=>General Options=>Model Creation : Edit properties and remove all things you does not want keep
    or
    b) Go to Tools=>General options=>Model Creation : Edit properties and click on Save as button and specify the file name "MyNewDefault".
        Quit the window.
        Select you new category : Go to Tools=>General Options=>Model Creation : "MyNewDefault"
        Edit properties and remove all things you does not want keep.
        Save you new category
    Question #2. How to define copies/replicas of existing diagrams
         Wrote an extension
    Question #3. How to make sure, particular diagrams can be used (created) only on predefined "levels" and how to set the parent-child relationship, so that PD enforced it directly when creating a new diagram.
         Specify yours conditons in your extension attached to your model
         Example : When the user want create a child diagram :  You can display a list of Parent Diagrams to select from.
         You can set in your extension by VBScript parent-child relationship
    Question #4 In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available.
    If I understand well your question. I suggest to take a look in
    Repository=>Administration=>Objects Permission Profile
    You can specify objects to show, mask, deactivate at model level.
    You can specifiy your own metadata.
    But I'm not sure you can mask, deactivate functions following diagram selection. It seem to specific.
    Message was edited by: Benoit Le Nabec

  • Error while creating fields in the Category Structure Urgent

    Hii,
    I am getting the Error while creating the Category structure fields
    Error Message : Entry YF_COU   does not exist in CABN - check your entry
    Message no. 00058
    Diagnosis
    Input values must be defined in Table CABN. The value or values 'YF_COU ' are not specified in this table.
    Procedure
    Check whether the input is correct and correct if necessary.
    Procedure for System Administration
    If this is not an incorrect entry, check the system settings and change them if necessary.
    If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.
    Please help me in this error
    Regards,
    Kumar

    Hii,
    I have assigned the Characteristics group /AFS/SAP_C to the characteristics but still i am getting the error when i assign the Char Field under the Category Structure.
    I have manually created the Characteristics Group AFS characteristics for categories. Is this will automatically updated or while installing the Add On.
    Please explain of the Configuration related to the Category Structure.  
    Regards,
    Kumar

  • While creating SAP ISU Device category i got one error message like The material 5 does not exist or is not activated Message no. M3305

    while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305

    I don't know EG01 transaction, but if SAP says "material 5 does not exist " then SAP is usually right.
    Can you give an evidence that material 5 exists? e.g. screenshot from  SE16 at table MARA, MARC and MAST

  • While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcom?

    While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcome?

    Neha,
    you can do in two ways.
    1. Enter a valid Division which you configured in the system.
    2. Remove the Division as required field. However I suggest it should have a valid division. Why can not you check with your Functional owner?
    Linganna Katigiri

  • Outofmemory while creating a new object of file with size more than 100 MB

    I have created an application which generates a report by getting the data from our archived files (.zip file).By the time, the application is reaching a file with size more than 100 mb, it is running out fo memory while creating the object of that particular file. Can some one help me by tellin if there id way to resolve this issue?
    Thanks in advance

    If you're getting OutOfMemoryError, the simplest thing to try is to give the VM more memory at startup. For Sun's VM, I believe the default is 64 MB. You can increase this by using the -X args that control the heap size. For example: java -Xms128m -Xmx256m ... etc. ... This says start with 128 MB of heap, and allow it to grow up to 256 MB.
    One thing to consider, though, is do you need that much stuff in memory at once? A more intelligent approach might be to unpack the archive to the file system, and then read a file at a time or a line at a time or a whatever at a time is appropriate for the processing you need to do.

  • User availabilty while creating a Property Category

    Hi,
    We have the current system with Authentication mode set as Mixed, while creating a Property Category I can see only the Users with Internal Authentication mode are available for selection as part of Property Category not the one with CSS mode, please suggest.
    Thanks,
    MM

    off cource Yes, but I am curious why the users are not shown for selection while creating/modifying the Property category,
    Murali

  • Getting ORA-32700 while creating database

    I am getting following error when creating the database :
    ORA-32700 error occurred in DIAG Group Service
    The error description is as follows :
    Cause: An unexpected error occurred while performing a DIAG Group Service operation.
    Action: Verify that the DIAG process is still active. Also, check the Oracle DIAG trace files for errors.
    The setup is as follows :
    Database : Oracle 9i Rel 2.
    OS : IBM AIX 4.3.3
    We are trying to create the database from sqlplus/dbca. It seems that in the database creation process it is throwing the error while it is trying to create the control files.
    listener.ora :
    LSNR_TSEDMDB2 =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = prcsmbk1)(PORT = 1522))
    TNSNAMES.ORA
    LISTENER_TSEDMDB2 =
    (ADDRESS = (PROTOCOL = TCP)(HOST = prcsmbk1)(PORT = 1522))
    We have IBM HACMP Cluster setup on 3 machines. This machine (prcsmbk1) on which I am getting the error while creating the database is part of that HACMP cluster. While installing the Oracle database software also it gave me a list of the 3 machines which are in HACMP cluster. We are not planning to setup RAC, but still it seems like while creating the database control files Oracle is trying to perform some group service operation.
    Alert log :
    Sat Jan 3 03:31:18 2004
    Starting ORACLE instance (normal)
    Sat Jan 3 03:31:18 2004
    Global Enqueue Service Resources = 64, pool = 4
    Sat Jan 3 03:31:18 2004
    Global Enqueue Service Enqueues = 128
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    GES IPC: Receivers 1 Senders 1
    GES IPC: Buffers Receive 1000 Send 530 Reserve 300
    GES IPC: Msg Size Regular 432 Batch 2048
    SCN scheme 3
    Using log_archive_dest parameter default value
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    Starting up ORACLE RDBMS Version: 9.2.0.4.0.
    System parameters with non-default values:
    processes = 150
    timed_statistics = TRUE
    shared_pool_size = 117440512
    large_pool_size = 16777216
    java_pool_size = 117440512
    control_files = /u01/app/oracle/oradata/TSEDMDB2/control01.ctl
    db_block_size = 8192
    db_cache_size = 33554432
    compatible = 9.2.0.0.0
    db_file_multiblock_read_count= 16
    fast_start_mttr_target = 300
    undo_management = AUTO
    undo_tablespace = UNDOTBS1
    undo_retention = 10800
    remote_login_passwordfile= EXCLUSIVE
    db_domain =
    instance_name = TSEDMDB2
    dispatchers = (PROTOCOL=TCP) (SERVICE=TSEDMDB2XDB)
    local_listener = LISTENER_TSEDMDB2
    job_queue_processes = 10
    hash_join_enabled = TRUE
    background_dump_dest = /u01/app/oracle/admin/TSEDMDB2/bdump
    user_dump_dest = /u01/app/oracle/admin/TSEDMDB2/udump
    core_dump_dest = /u01/app/oracle/admin/TSEDMDB2/cdump
    sort_area_size = 524288
    db_name = TSEDMDB2
    open_cursors = 300
    star_transformation_enabled= FALSE
    query_rewrite_enabled = FALSE
    pga_aggregate_target = 25165824
    aq_tm_processes = 1
    Sat Jan 3 03:31:19 2004
    clUster interconnect IPC version:Oracle UDP/IP
    IPC Vendor 1 proto 2 Version 1.0
    PMON started with pid=2
    DIAG started with pid=3
    LMON started with pid=4
    LMD0 started with pid=5
    DBW0 started with pid=6
    LGWR started with pid=7
    CKPT started with pid=8
    SMON started with pid=9
    RECO started with pid=10
    CJQ0 started with pid=11
    QMN0 started with pid=12
    Sat Jan 3 03:31:24 2004
    starting up 1 shared server(s) ...
    starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
    Sat Jan 3 03:31:25 2004
    Create controlfile reuse set database TSEDMDB2
    MAXINSTANCES 1
    MAXLOGHISTORY 1
    MAXLOGFILES 50
    MAXLOGMEMBERS 5
    MAXDATAFILES 100
    Datafile
    '/u01/app/oracle/oradata/TSEDMDB2/cwmlite01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/drsys01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/example01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/indx01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/odm01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/system01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/tools01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/undotbs01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/users01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/xdb01.dbf'
    LOGFILE GROUP 1 ('/u01/app/oracle/oradata/TSEDMDB2/redo01.log') SIZE 102400K,
    GROUP 2 ('/u01/app/oracle/oradata/TSEDMDB2/redo02.log') SIZE 102400K,
    GROUP 3 ('/u01/app/oracle/oradata/TSEDMDB2/redo03.log') SIZE 102400K RESETLOGS
    Sat Jan 3 03:31:25 2004
    ORA-1503 signalled during: Create controlfile reuse set database TSEDMDB2
    MAX...
    Sat Jan 3 03:32:28 2004
    Restarting dead background process QMN0
    QMN0 started with pid=15
    Sat Jan 3 03:32:28 2004
    Shutting down instance (abort)
    License high water mark = 3
    Instance terminated by USER, pid = 47128
    Diag trace file :
    /u01/app/oracle/admin/TSEDMDB2/bdump/tsedmdb2_diag_49754.trc
    Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
    With the Partitioning, Real Application Clusters, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.4.0 - Production
    ORACLE_HOME = /u01/app/oracle/product/9.2.0
    System name: AIX
    Node name: prcsmbk1
    Release: 3
    Version: 4
    Machine: 0002599F4C00
    Instance name: TSEDMDB2
    Redo thread mounted by this instance: 0 <none>
    Oracle process number: 0
    49754
    Number of Serviceable Networks detected is less than 2
    Disabling Transparent Network Failover Feature.
    *** SESSION ID:(2.1) 2004-01-03 03:31:19.886
    kjzcprt:rcv port created
    kjzmreg2: slos err[1 19 [HA_GS_CONNECT_FAILED] sskgxn_gs_in 19]
    [kjzmreg2]: Error [category=1] is encountered
    Node monitor problem:[32700][kjzmreg2]
    Membership is lost in DIAG group
    Any help is appreciated. Thanks in advance.

    Thanks a lot for all your responses. We found the issue. The issue was that when we installed 9i we selected Enterprise option which installed RAC also. And after that when we were trying to create database Oracle was thinking that we are trying to create database in RAC env. and most likely it was trying to create/sync the control files on all the machines in the cluster.
    The sequence of events were as below :
    1. We have 8i installed on this machine
    2. We installed 9i (9.2.0.1.0) using the same ORACLE_BASE but different ORACLE_HOME. We didn't select "Custom Install". We selected "Enterprise install" option
    3. We installed new installer (2.2.0.18.0 ) and then 9i patch (9.2.0.4.0)
    4. While creating the database (manually & through DBCA) we were getting ORA-32700
    5. We tried to uninstall (using OUI 2.2.0.18.0) 9i (including the patch) completely but it never succeeded. We noticed that when we started uninstall it did show progress for about 20 minutes and after that it didn't show any progress. It was not taking any CPU cycles and It was not writing to the log file either. Basically we were never able to cleanly uninstall 9i. We tried almost 2 to 3 times.
    6. Then we installed 9i using a new ORACLE_BASE and this time we selected "Custom Install" and we did not install RAC. This is successful
    7. Then we installed new installer (2.2.0.18.0 ) and we tried to install the 9i patch (9.2.0.4.0) using this new installer but it never succeeded. Then we tried to install the 9i patch (9.2.0.4.0) using the old installer version (2.2.0.11.0) and it was also successful.
    8. Then we tried to create database using DBCA and it was successful and then we dropped the database which was created using DBCA and then we created it manually through SQLPLUS and this was fine too.
    So basically what we learned from this exercise is that if we are installing 9i on a machine which is part of a cluster and if we don't plan to setup RAC then we shouldn't install RAC and we should do a custom install. I wish there was a option in create database stmt to tell Oracle that though we are creating database on a machine which is part of a cluster environment but we don't intend to setup RAC.
    And other thing which is still a mystery is that why does the uninstall never completes successfully. One question on this : We were using the installer version 2.2.0.18.0 to uninstall the 9i software. Do we need to use the older version (2.2.0.11.0) of the OUI?

  • Size category

    Hi Experts
           While creating table in SE11, we mention size category,
    If the records exceeds the limit what we mentioned in the table,
    then how it will store data.
       for example, if exceeds 12000 records,  cant we store data in the table.
    pls advice me.
    regards
    rajaram

    Hi,
      The size category describes the expected storage requirements for the table on the database.
    An initial extent is reserved when a table is created on the database. the size of the initial extent is identical for all size categories. If the table needs more space for data at a later time, extents are added. These additional extents have a fixed size that is determined by the size category specified in dictionary.
    Regards
    Abhijeet

  • Error, while creating a control file

    Hi All,
    DB Version :- SQL*Plus: Release 10.2.0.3.0
    I am in process of carrying out full db refresh from cold backup. I came across with following, while creating a contrl file. strange to see two dbf's has same file_id. Please help me to solve this issue.
    ==
    SQL> @a.sql
    CREATE CONTROLFILE SET DATABASE LNRATU2 RESETLOGS NOARCHIVELOG
    ERROR at line 1:
    ORA-01503: CREATE CONTROLFILE failed
    ORA-01167: two files are the same file/group number or the same file
    ORA-01110: data file 6: '/data/oracle/LNRATU2/data02/LNRATU2_audits.dbf'
    ORA-01110: data file 6: '/data/oracle/LNRATU2/data01/LNRATU2_audits_01.dbf'
    ===
    hare krishna

    Thanks.. Find below the a.sql contents.
    CREATE CONTROLFILE SET DATABASE LNRATU2 RESETLOGS NOARCHIVELOG
    MAXLOGFILES 5
    MAXLOGMEMBERS 3
    MAXDATAFILES 300
    MAXINSTANCES 1
    MAXLOGHISTORY 58720
    LOGFILE
    GROUP 2 (
    '/data/oracle/LNRATU2/redo01/LNRATU2_redo02a.dbf',
    '/data/oracle/LNRATU2/redo02/LNRATU2_redo02b.dbf'
    ) SIZE 500M,
    GROUP 3 (
    '/data/oracle/LNRATU2/redo01/LNRATU2_redo03a.dbf',
    '/data/oracle/LNRATU2/redo02/LNRATU2_redo03b.dbf'
    ) SIZE 500M
    DATAFILE
    '/data/oracle/LNRATU2/data01/LNRATU2_audits_01.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_01.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_02.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_03.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_04.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_05.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_06.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_07.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_08.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_09.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_10.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_11.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_12.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_13.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_14.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_15.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_16.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_17.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_18.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_19.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_20.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_21.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_22.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_23.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_24.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_25.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_26.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_27.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_28.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_29.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_DATA01_30.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_INDX01_01.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_INDX01_02.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_INDX01_03.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_INDX01_04.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_INDX01_05.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_INDX01_06.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_INDX01_07.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_INDX01_08.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_INDX01_09.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_INDX01_10.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_INDX01_11.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_INDX01_12.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_INDX01_13.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_INDX01_14.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_INDX01_15.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_INDX01_16.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_INDX01_19.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_MCINFO_DATA01_01.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_MCINFO_INDX01_01.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_MCINFO_LOB01_01.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_quest_01.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_RATEOD_LOB01_01.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_RMS_DATA01_01.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_RMS_DATA01_02.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_RMS_INDX01_01.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_RMS_INDX01_02.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_RMS_INDX01_03.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_RMS_LOB01_01.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_sysaux_01.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_system01.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_tools_01.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_UNDOTBS101.dbf',
    '/data/oracle/LNRATU2/data01/LNRATU2_users_01.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_audits.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_DATA01_31.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_DATA01_32.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_DATA01_33.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_DATA01_34.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_DATA01_35.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_DATA01_36.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_DATA01_37.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_DATA01_38.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_DATA01_39.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_DATA01_40.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_DATA01_41.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_17.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_18.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_20.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_21.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_22.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_23.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_24.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_25.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_26.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_27.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_28.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_29.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_30.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_31.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_32.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_33.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_34.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_35.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_36.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_37.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_INDX01_38.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_quest_01.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_RATEOD_LOB01_02.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_RMS_DATA01_03.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_RMS_DATA01_04.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_RMS_DATA01_05.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_RMS_INDX01_04.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_RMS_INDX01_05.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_RMS_INDX01_06.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_RMS_INDX01_07.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_statpack_01.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_sysaux_01.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_system01.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_tools_01.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_UNDOTBS1_02.dbf',
    '/data/oracle/LNRATU2/data02/LNRATU2_users_01.dbf'
    CHARACTER SET WE8ISO8859P1
    hare krishna

Maybe you are looking for

  • My Google Toolbar is not visible in Firefox 3.6

    I'm working on Windows 7 andGoogle toolbar is 7.1. I've deleted the files in the profile folder as suggested but it's still not visible. When I go to view toolbar the google toolbar is ticked and there is a blank space under firefox toolbar, when I u

  • Most of the time I get The Connection Was Reset. Can someone tell me why this happens?

    When I click on Firefox or when browsing or going from one site to the other I get "The connection was reset" then have to click on Try Again. Can someone tell me why this is happening? Thank you. THE CONNECTION WAS RESET again this morning. I even g

  • P1566 and Terminal Services.

    I have a 64 bit 2008 server running terminal services, A client with windows xp 32 bit and HP LaserJet P1566 printer attached to it.  When connecting via RDP to the server the printer is mapped though to TS and appears on the printer list.  How ever

  • Can't sync photos or video on N8 OVI suite

    I have the latest version of the Ovi Suite, however I have uninstalled and reinstalled, repaired, checked for updates of my phone which is all the errors say to do. Still can not sync photos or video?  keeps saying my device is busy? Yet nothing open

  • Address ship to error

    We have SRM 4.0 We have a problem with ship to address; this address was assigned to purchasers in attribute ADDR_SHIPT and the POu2019s were generated by this address correctly. However one of them purchasers doesnu2019t take this address and displa