Size changes upon copy-paste

Hi again,
Within the same project I have several clips in sequence A that I would like to edit in a new sequence B.
When I copy a clip from sequence A and paste it in sequence B that I just created in the project, the size of the clip is changed . It appears as 4:3 instead of 16:9 ...
Could someone please tell me what I do wrong ?
Thanks
Ivan

Yes it works fine when I check the box.
As a matter of fact, the frame size of my sequence is set to NTSC(4:3) I have no idea why it was that way since my original project was 1440x1080 (16:9) !
indeed, if I check the box, it goes to 16:9 and looks fine.
I thought that once the project is created, all new sequences created within this project would have the same settings. Am I wrong ?
Also, what is exactly the action of "anamorphic" ? I see it changes the format but I am not sure I understand the real meaning, even after reading the literature I was checking quickly after your replies...
I hope that I am clear
Many thanks

Similar Messages

  • How do you keep strokes, etc, from changing when copying & pasting?

    I am sure there is a simple solution to this problem, but I cannot figure it out and could use some help.  I have a graphic in one InDesign document (ID CS4 - using Windows XP Pro) and when I try to copy and paste it into another ID doc, it completely changes the strokes and fills.  It usually does the opposite of what is in the graphic (this happens with every graphic I try this with).  So if I have a circle that is stroke only, when I copy and paste it, it comes in with no stroke and a fill.  I have to use these graphics between documents frequently and some of them are complicated, making it difficult to spend the time correcting this problem.  When I tried adding the graphic to a library, it did the same thing.  It also changed it when I moved one page to another document.  Anyone have any ideas why this might be happening and how to make it stop? 
    Thanks,
    GS

    Thanks for the reply.  While it wasn't the preferences, I did find a link on the link you included in your answer that led me to the solution.
    The problem was conflicting object styles.  The solution was to load the object style from the doc that included the graphic into the doc that I wanted to place the graphic in.  Then when I copy & paste, the graphic comes in perfectly.  The only problem is if there are other graphics in that doc, but now that I know there is an issue with object styles, I can pay attention to it as I design.
    I can always count on the forum for great answers!
    GS

  • Why do I have to insert someone else's resume into my profile to change my copy paste settings??

    I just want to use copy/paste with my mouse.
    Why can't you make it just a toggle in Firefox?
    Why do I have to enter someone else's resume in my user.js file??
    That makes even LESS sense.
    For Firefox:
    Quit Firefox. If you have Quick Launch running (in Windows, an icon in the toolbar), quit that too.
    Find your Firefox profile directory.
    Open the user.js file from that directory in a text editor. If there's no user.js file, create one.
    Add these lines to user.js:
    [edit: removed personal information]
    Note: The preference is site as well as protocol specific. For example:
    user_pref("capability.policy.allowclipboard.sites", "http://www.mozilla.org")
    is not the same as:
    user_pref("capability.policy.allowclipboard.sites", "https://www.mozilla.org")
    This is because the first uses HTTP while the second uses HTTPS.
    If you want to allow multiple URLs to access the Paste operation, separate the URLs with a space. For example:
    user_pref("capability.policy.allowclipboard.sites",
    "https://www.mozilla.org https://developer.mozilla.org")
    For more information about security policies, see http://www.mozilla.org/projects/security/components/ConfigPolicy.html.

    Sorry about that. You can find the addons by using:
    <br> Tools > Add-ons > Extensions
    <br> "Extensions" is under the "Get Add-ons" item
    Screenshot:
    <br> http://www.3drotator.com/support/JavaFirefox12AddOnsManagerExtensions.jpg
    I'm thinking maybe those sites use different text editors than other websites making copy and pasting outside of those webpages a PITA.
    This site tries to explain how to do what you were trying to do earlier.
    <br> http://www.infogears.com/cgi-bin/infogears/mozilla_firefox_copy_paste.html
    <br>Which is to enable access to the clipboard (the place where copied items are stored) for these sites.
    The addon [https://addons.mozilla.org/en-US/firefox/addon/allowclipboard-helper/ AllowClipboard Helper] tries to fix this on websites like the ones you go to. But it can be tricky to setup. There's a good tip from one of the reviewer's of that addon by the guy named '''pewe''' ([https://addons.mozilla.org/en-US/firefox/addon/allowclipboard-helper/reviews/351658/ Link to review]).
    So in Firefox, copying is blocked from certain text editors.
    <br> This article tries to explain why Firefox does this:
    <br> http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
    It works in Internet Explorer because they are not strict about this "Javascript access to clipboard" feature but Firefox is b/c they think it's a security risk since the website can read and copy whatever you put into the clipboard.
    So long story short, certain websites use text editors that make it impossible to copy & paste stuff from them to other areas where you want to copy & paste. You could try all the stuff I mentioned above (although it's a bit nerdy) or you can save yourself the trouble/frustration and just use Internet Explorer when browsing these websites.
    If you hate switching between IE & Firefox just to check a few sites, try the [https://addons.mozilla.org/en-US/firefox/addon/ie-tab-2-ff-36/ IE Tab addon]. It lets you use Internet Explorer inside Firefox by opening it in a special tab. Don't ask me how they do it. :P But it works.

  • [Basic Paragraph] style behaviour upon copy/paste

    Hi,
    we just get started changing from Quark to InDesign, and our lead layout-producer is not so crazy about style sheets, so everything she creates is using the [Basic Paragraph] Style.
    A by her created libary now contains groups of text objects in Basic Paragraph with format changes +
    When I use these groups, or copy and paste from another document, why does InDesign keep the changes like fontsize or -color, but does change the font?
    My basic paragraph does use another font, so its quite annoying INDD keep the changes, but keep change the font.
    What can I do to prevent INDD from changing the font?

    So, i made this beauuutiful thingy for a test. It looks disgusting, i know. The point is that it uses 4 fonts and different modifications.
    If I get you right, to prepare a "good" document, our layout-producer should clogg our documents with different paragraph-styles not to use the Basic? Sure, she can convert it into paths, but different collegues have to translate this stuff later so that isnt an option.
    Maybe she can "design" things like that in Illu, giving us an AI to use.
    I made an irritating discovery:
    As I built this thing with Futura as my Basicparagraph-font, i dragged it into a libary, closed every doc to change my default-paragraph-style to another font to see what happens. I set up a empty doc and dragged it back in again – no changes at all. I was surprised. Its in the basic, it has a +, and if i click on basic it changes to GillSans, if i alt+click the modifications (like the colors) turn to black… – this is what i was looking for :-)
    But why with my other test-object. Im nearly in closing time here, so i will upload an image tomorrow, but the only variable that haved changed to my second try minutes ago:
    – the objects were converted using Q2ID (Markzware)
    – the group just contained one (but another) font
    Maybe theres the problem somewhere.

  • How do I keep the same size slide when copying/pasting in Keynote??

    I have several presentations in Keynote. But when I copy from one, and paste into another, The slde is now shorter, and not as long. as I try to "stretch" it out, it becomes higher also at the same time, and I loose part of my slide.... Any help would be much appreciated...

    Try and activate either track # column, or album column header.
    In this example I've sorted my album by year:
    http://img367.imageshack.us/img367/701/sortbyyearyo8.jpg

  • Image size changing upon saving.

    I'm working on digital negatives for school and right before saving the image, it is 8.07M. But after saving the image and looking at the image info, it says 4.9M. Why is it saving my image to a smaller image?

    The image size does not change, you're talking about the file size.
    And the file size depends on the file type, the contents, the compression options used, etc.

  • Folder size changes when copied

    I bought two identical external hard drives.  They are both formatted the same - Mac OS extended journaled. 
    When I copy some large folders from one drive to the other, and then check their exact sizes with get-info, sometimes they are identical and sometimes they are different, usually in a small amount.
    Should I be worried that I'm losing some data?  Or is it common that folders are not read accurately to the last bit, but that they are in fact identical?

    Really?  I'm the only person who has ever seen this?  I make a copy of a large folder from one Mac extended journaled drive to another Mac extended journaled drive and the new copy is slightly different in size, per get-info?
    Surely I'm not the only person encountering this...
    Can anyone advise?

  • Copy/Paste Issues

    I'm working on a simple order form. I scanned in the pdf and then manually placed the form fields. Because a lot of the fields are the same size, I used copy/paste to speed up the process. Now when I go to enter text in one field, it enters the identcal text in all the pasted fields.  Is there a way to seperate each field?
    Also, how do I make the text auto shrink to stay within the form size?
    Thanks for your input. I'm new at this.  Below is the link to the file.
    https://www.dropbox.com/s/g1rkzt4fhoo59nu/Northern%20Door%20Order%20Form%20%28Fillable%29. pdf

    Select the fields you want to edit, go to Properties, Appearance, set Font
    Size to Auto.

  • Office365 macbook air while copy paste and change font to tahoma forarded message remain with different fonts and size not accepting change

    office365 macbook air while copy paste and change font to tahoma forarded message remain with different fonts and size not accepting change
    mac yosemite
    office365

    Also here's the log before it happened. As you can see there is no activity from 9:48 to 10:00 am when the sound occurred.
    23/02/2014 9:48:12.792 am ntpd[52]: FREQ state ignoring -0.145411 s
    23/02/2014 9:48:15.258 am WindowServer[96]: _CGXHWCaptureWindowList: No capable active display found.
    23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000280
    23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319378: AirPort_Brcm43xx::powerChange: System Sleep
    23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319390: wl0: powerChange: *** BONJOUR/MDNS OFFLOADS ARE NOT RUNNING.
    23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
    23/02/2014 10:00:04.000 am bootlog[0]: BOOT_TIME 1393167604 0
    23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
    ASL Module "com.apple.appstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
    ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
    Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".

  • Pages Copy & Paste Style Buttons don't change font size and style?

    Shouldn't the font size and style also be copied and pasted when I use the buttons to copy & paste the style within a page?

    Hello
    It seems that the description of these buttons in the Help is not clear.
    After several attempts, one may understand that they don't apply to attributes inserted "by hand" with cmd + B for instance but to "styles" defined in the Styles drawer.
    Yvan KOENIG (from FRANCE dimanche 30 mars 2008 20:34:35)

  • Font size changes when pasting ito new layer

    Since I updated Phothoshop to CC a strange error occures. When I copy text from one layer and paste it into a new layer the font size changes. I have tried resetting the texttool but this has no effect. Does anybody know what the solution to this problem can be?
    OS 10.9.4, CC 2014

    This should not happen.
    Try duplicating the layer with Ctlr + J...

  • Fields don't recognize their value has changed when a copy/paste value in inputed

    I'm having a minor hiccup with my copy and paste buttons.
    I have check boxes that, when checked, make other fields visible.  The copy/paste actions recognize when the check box value is 1 and paste accordingly in the new instance of the subform, however, the invisible fields do not become visible, despite the check box value being 1 in the new instance.  I feel like I'm missing something simple....possibly something that forces the scripting within the check box field to run since it is not recognizing that it's value has changed?  If I manually click the check box in the new instance, the scripting works and the invisible fields become visible so I know its not an issue with creating new instances.
    Any suggestions will be appreciated...I am new to this...
    Scott

    Still interested in solving this issue....anyone? please?

  • After copying a file from NTFS to HFS volume, file size changed when viewing in Windows

    Hi guys,
    I have a Mac Air running Mavericks on a HFS partition and Windows 7 on a BOOTCAMP NTFS partition. I have some files that I want to read/write from/to both systems. Since OS X can't write NTFS and Windows can't write HFS either, and I don't want to use any 3rd-party tools/drivers, I have to adopt a "stupid" way: in OS X, I copy those files from NTFS to its HFS partition, make changes, then switch to Windows and sync them back to NTFS.
    The problem is, after I copied a file from NTFS to HFS in OS X, it seemed ok. But when I switched to Windows, the very copied file in HFS partition had its size changed (bigger) although I didn't make any changes to it in OS X yet. This happens to almost every file I copied, text and binary. For those text files, I tried to open it with EditPlus in Windows and EditPlus reports the correct size on the status bar.
    How could this happen?

    I am not sure if this is what your seeing but...
    The same unaltered file on two different volumes might use different amounts of disk space. This is because a 'disk' is divided in to 'blocks' and a block (also historically known as a 'sector') is a certain minimum size. So if disk-1 has a block size of 512 bytes and disk-2 has a block size of 1024 bytes then a file containing just 10 bytes will use up twice as much space on disk-2 as disk-1 even though it is the exact same file.
    Beyond that, Macs can add additional information like Spotlight tags, labels, icons, etc. which make a file bigger. If you are modifying a file then presumably that also implies adding additional content e.g. for a Word document more text and this will make it bigger. Also depending on some programs are configured or designed 'deleting' text may only mark it as deleted and not really delete. This can apply to older versions of Word which has a 'Fast Save' feature, new versions have removed this and do a proper delete.
    You would have to give more details like what you are doing to the document, what kind of document, and what the two sizes are.
    Finally, there is one other potential difference, some systems and manufacturers use 1024 as a unit for measuring file and disk sizes, some use 1000. It will be the same number of bytes in each case but 1000 bytes in one case would exactly equal 1MB, and in the other it would be 0.9765MB.

  • Copy/paste with original size and not 72 dpi

    Hello,
    With iPhoto, I used to copy/paste a photo to Photoshop in its original size.
    With Photos for Mac, the pasted image seems to be 72 dpi only.
    Do I have to move back to iPhotos or have I missed something ?
    (nota : I don't wan't to export / import files)
    ps : sorry for my english

    (nota : I don't wan't to export / import files)
    Try use the Media Browser in the Open dialogue of iPhoto.

  • I want layer or shape width size copy to clipboard for re size my photo before pastit ps cs2 os xp

    i want layer or shape width size copy to clipboard for re size my photo before past into   ps cs2 os xp
    please give me solution for this [email protected]

    Using the clipboard for something like this seems wasteful (both for storing the number and for inserting an image).
    If you can elaborate on the Layer and File Structure maybe someone over at
    Photoshop Scripting
    can help you find another approach.

Maybe you are looking for