Size for an attachment in a Workflow

Somebody help me, I need know which is the maximum size for an attachment in a Workflow?
Regadrs,
Alvaro Achí

There is nothing in the "book" about the size of attachments (though there is a section about them - page 101). So, this tells me it depends on your mail server. You want to differentiate between work item attachments and e-mail attachments. My hunch is that work item attachments have no limit as they are already stored on the server. e-mail attachments could have some limitations based on your SAP e-mail server (that sends the e-mail) and your corporate e-mail server (that receives the e-mail).

Similar Messages

  • Please can you tell me the default maximum file size for an attachment in Case Management v12 ?

    Hi,
    Please can you tell me the default maximum file size for an attachment in Case Management v12+? I am able to define a maximum attachment size but I am not able to see what the default is set to.
    Thank you
    Regards,
    Anthony

    Hi,
    The default max attachment size is 8MB.
    Regards.
    Mike

  • Limit size for attachment

    Hello. Is possible to restrict the size for each attachment? I know that CRM permit upload attachment for 9MB maximum, but I want to restrict my users that every attachment souldn't exceed 1MB.
    Thanks

    There is a way to get round the attachment size issue if you can create an office/LAN filing folder structure (with no spaces in the file path/s and file name) and add the attachment only as a URL to link to the file on your office server. This takes up only about 2K storage space for the URL link in CRM. It will open the document direct from the link entered. There are specific parameters to be met for this but we make this part of our training for users.
    However, the effectiveness of this depends on users only linking files that will open readily from your LAN server. Of course, network access to the folder structure must be developed for the appropriate rights for the CRM users.
    If you have a virtual private network connecting office LANs in various locations, then, if your networks are standardised, you can set up a distributed file system with standardised folder structure (again with no spaces) but might want to advise users to add URLs for files no larger than, say, 500K, or there could be some delay in opening documents across the VPN, depending on the speed/capacity of your VPN connections. So technically we are not "limiting" size, just training users to know what not to do.
    As admin in an international organisation, I ask (train) any users, who want to refer to files which are very large, to enter the basic details in a Note on the record - giving name of document, size, who to contact for a copy to be emailed, brief summary of content etc. Then other users can request a copy of the file by email, either by setting a task for the file owner or sending an email.
    Not sure if this can help in your situation, but it works well for us.
    Robyn

  • 6230i - What's the maximum attachment size for EMa...

    Hi
    I got my new 6230i (Firmware 3.40 on T-Mobile) yesterday and have just set up my email on it and discovered that you can attach files to emails. Only problem seems to be that it says my attachments exceed the limit. That's a bit unfortunate as I've tried to attach only one image (~350kB) which I took with the built in camera.
    Anyone know what the maximum size allowed for an attachment is and is there a way around it?
    Thanks
    Thomas

    We are talking about 6230i (and not 6630).
    In 6230i case, the max. size is limited:
    Sending: 100kB
    Receiving: 50kB
    This is limited by the phone (and not network or email provider).Message Edited by embedded_system on 19-May-2006
    10:17 AM
    Message Edited by embedded_system on 19-May-2006
    10:33 AM

  • Maximum attachment file size for email account

    hi what is the maximum file/s attachment size for email accounts .com and where do I find the means to adjust/ change the setting? thanks  Brewsta

    Our BigPond mail attachment limit is 10MB. This is the user guide for our BigPond email service:
    https://my.bigpond.com/res/pdf/premiummail/installation_user_guide.pdf
     

  • Stack size for native thread attaching to JVM

    All:
    I have a native thread (see below, FailoverCallbackThread) that attaches to the JVM and does a Java call through JNI. The stack size for the native thread is 256KB.
    at psiUserStackBangNow+112()@0x20000000007a96d0
    at psiGuessUserStackBounds+320()@0x20000000007a8940
    at psiGuessStackBounds+48()@0x20000000007a8f60
    at psiGetPlatformStackInfo+336()@0x20000000007a9110
    at psiGetStackInfo+160()@0x20000000007a8b40
    at psSetupStackInfo+48()@0x20000000007a5e00
    at vmtiAttachToVMThread+208()@0x20000000007c88b0
    at tsAttachCurrentThread+896()@0x20000000007ca500
    at attachThread+304()@0x2000000000751940
    at genericACFConnectionCallback+400(JdbcOdbc.c:4624)@0x104b1bc10
    at FailoverCallbackThread+512(vocctx.cpp:688)@0x104b8ddc0
    at start_thread+352()@0x20000000001457f0
    at __clone2+208()@0x200000000030b9f0
    This causes stack overflow in Oracle JRockit JVM. (It does not cause overflow with Oracle Sun JDK.) Is there a recommended stack size for this use case for JRockit? Is there a way to compute it roughly?
    Platform Itanium 64 (linux)]
    java version "1.5.0_06"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
    BEA JRockit(R) (build R26.4.0-63-63688-1.5.0_06-20060626-2259-linux-ia64, )
    mp

    How do I found default heap size, stack size for the
    thread, number of threads per jvm/process supported ?The threads is OS, OS install and jvm version specific. That information is also not useful. If you create the maximum number of threads that your application can create you will run out of memory. Threads require memory. And it is unlikely to run very well either.
    The default heap size and stack size are documented in the javadocs that explain the tools that come with the sun jdk.
    and how the above things will vary for each OS and how
    do I found ? Threads vary by OS, and OS install. The others do not (at least not with the sun jvm.)
    If I get "OutOfMemoryError: Unable to create new native thread" Most of the time it indicates a design problem in your code. At the very lease, you should consider using a thread pool instead.
    I found in one forum, in linux you can create maximum
    of 894 threads. Is it true ?Seems high since in linux each thread is a new process, but it could be.

  • Set Maximum size for a subpanel created with splitter bars in LV8

    Does anyone know how to set the Maximum size for a subpanel created with asplitter bar? If I show one cluster in the subpanel and use the scroll bar to scroll, I can see more (blank) area than I want. I just want the user to be able to scroll a cluster within a subpanel while the cluster is larger than the view area of the subpanel. I don't want to let the user scroll outside the cluster.
    Ravi Beniwal

    I apologize for the mixup in terminology. Please read Pane wherever the word Subpanel was used.
    Please see the attached VI for a description of my problem.
    I would really appreciate any help with this.
    Ravi Beniwal
    Attachments:
    Pane Scrolling Problem.vi ‏10 KB

  • Advice on sequence settings - frame size for VHS video in FCP

    Hello,
    I was hoping that I could get some advice on editing and output for video captured from VHS Tapes to ensure the best quality possible.
    My current workflow to digitize the VHS tapes is:
    VHS signal from JVC S7600u with TBC into ADVC 300 (no de-interlace or other filters set) into a Mac Pro via firewire.  Capture preset in FCP is DV NTSC 48khz.
    Once in FCP - the captured VHS video frame size is 720 X 480, Vid rate is 29.97, pixel aspect is NTSC-CCIR 601 and field dominance is lower (even)
    My questions are:
    If my final destination is for You Tube sharing , are these the best sequence/ frame size settings or should I convert the sequence frame size to 640 X 480, or should I leave at 720 X 480 while working in FCP and then output to Compressor and select the H264 you tube sharing video setting and change the frame size to 640 X 480? 
    Should I de- interlace for internet/youtube destination?
    Should I de-interlace for DVD/TV destination?
    If I want to burn the finished project to DVD and watch the video on a progressive montitor/ TV screen, what would be the best settings/frame size for that?
    If any of you out there have experience with editing vcr/analog video in FCP and have a good workflow to ensure best quality, I would really appreciate  any advice/suggestions.
    Thanks in advance.

    Digitize to 720X480 frame size in FCP. In compressor, your YouTube preset will automatically deinterlace and a square pixel aspect ratio.No deinterlacing for DVD.
    Russ

  • Recommended Image Size for Contact Pictures?

    Hi All,
    I want to edit up some family members to attach thier images to my iPhone contacts... Does anyone know what the preferred resolution size is for the iPhone for optimal appearance?
    I've tried to do this with outlook before, and I hate the way it dithers the images to a low quality.... I'm hoping that the iPhone doesn't do this and so I wanted to experiment with how they would appear...
    But instead of making the images just any random size, I wanted to crop them to the preferred image/pixel size so that my photoshopped images look like what I expect them to show up like...
    If you could advise with the documented or known pixel resolution size used by the iPhone it would be appreciated!

    Thanks, but I don't believe that the contacts come up full screen do they?
    Usually there is a optimal image size for certain things like contact photos and I am just trying to help ensure that all my photos are the same size and don't vary...
    I might be a little carried away with how I am formatting them, but just hoping someone already knows this answer!

  • How to increase font size of pdf attachment?

    hi Experts,
                      i am facing a problem to increase the size of pdf attachment which is generated through spool no.
    The spool is generated with line size 120. if i increase the line size  then still no impact on size in the downloaded pdf document.
    i want to increase the size of pdf attachment ?
    for your better understanding screen shot given below
    in spool and pdf
    kindly  help me in this regards,
    with thanks and regards
    vikas

    hi sanjeev ,
                        thanks for your reply, on dummy prg its working fine..let me check on live
    regards,
    vikas
    i have attached the screen shot..
    its taking the defatul % set in pdf .
    how to handel this zoom % as mentioned in screen shot..
    its not showing any impact with line size increase or decrease.
    regards,
    vikas

  • Maximum file size for export into MP4?

    Hello,
    I am not able to export 2 hour HD video into standard MP4 file. It seems that reaching 100% export algorithm gets into loop. I was waiting for hours and still had seen progress at exactly 100% with final file size on hard disk to be 0 bytes. I am using CS5 on MAC OS X. I had to split my timeline to 2 parts and to export them separately (which is embarrasing). Is there something like maximum file size for export? I guess that 2h video would have about 25-35GB.
    Thank you
    jiri

    You are right.
    So I am running AP Pro 5.0.4, Adobe Media Encoder 5.0.1.0 (64bit). Operating system Mac OS X ver 10.7.3. All applications are up to date.
    MacBook Pro Intel i5 2.53GB, 8GB RAM, nVidia GT 330M 256 MB, 500GB HDD
    Video is 1920x1080 (AVCHD) 25fps in a .MTS container  (major part of timeline), 1280x720 30fps in .MOV container (2mins), Still images 4000x3000 in .JPG
    No error message is generated during export - everything finishes without any problem...just file created has 0 byte size (as described above).
    This is my largest video project (1h 54min) I dont have any other problem with other projects.
    I dont run any other special software, at the moment of export all usual applications are closed so that MacBook "power" can go to Media Encoder. No codecs installed, using VLC Player or Quick Time.
    Attached please find printscreen from Export settings (AP Pro). Writing this ppost I tried to export only the first 4mins from timeline where all kind of media is used...and it was OK.
    As a next step I will try to export (same settings) 1h 30mins as I still believe problem comes with length of video exported.
    Let me know your opinion

  • ALBPM 6.0 : The maximum size for file uploads has been exceeded.

    Hi,
    I use AquaLogic BPM Entreprise server to deploy my Process. When I try to publish a process on my server I get the following error:
    An unexpected error ocurred.
    The error's technical description is:
    "javax.servlet.jsp.JspException: null"
    Possible causes are:
    The maximum size for file uploads has been exceeded.
    If you are trying to publish an exported project you should publish it using the remote project option.
    If you are trying to upload the participant's photo you should choose a smaller one.
    An internal error has ocurred, please contact support attaching this page's source code.
    Has someone resolve it?
    Thank's.

    Hi,
    Sure you've figured this out by now, but when you get the "Maximum size for file uploads" error during publish consider:
    1. if your export project file is over 10mb, use "Remote Project" (instead of "Exported Project") as the publication source. That way when you select the remote project, you will point to ".fpr" directory of the project you are trying to publish.
    Most times your project is not on a network drive that the server has access to. If this is the case, upload the .exp file to the machine where the Process Administrator is running, then expand it in any directory (just unzip the file). Then, from the Process Administrator, use the option to publish a Remote Project by entering the path to the .fpr directory you just created when unzipping the project.
    2. Check to see if you have cataloged any jars and marked them as non-versionable. Most of the times the project size is big just because of the external jar files. So as a best practice, when you do a project export select the option "include only-versionable jars", that will get reduce the project size considerably (usually to Kb's). Of course you have to manually copy the Jar files to your Ext folder.
    hth,
    Dan

  • Maximum message size for internal users

    Hi,
    Is it possible to configure a maximum message size for internal users and also create exceptions?
    The templates available in Transport Rules only allow for "when size of any attachment is greater or equal". This is not ideal as users can add 50 X 1MB attachaments to an email etc.
    Configuring Transport settings or Receive Connectors do not allow for exceptions.
    Thank you.

    Hi Prakash,
    Thanks for the link to the thread. The AD site link configuration is valid but does not account for the required exceptions. E.g User A can send unlimited size message to User B but not to User C.
    The thread also mentions the Transport Rule configuration stated in my original post but that configuration has one major flaw. Users can circumvent the control by splitting attachments.

  • Could not get stream for task attachment

    When uploading Document and Trying to view documents in Worklits we get the following error:
    <Error> <oracle.soa.services.workflow.worklist> <BEA-000000> <<oracle.bpel.services.workflow.worklist.servlet.ADFAttachmentHelper.getTaskAttachment>
    Could not get stream for task attachment:
    This seem to have been a bug on previous versions of Oracle BPM but we're receiving it on 11.1.1.7
    Any idea what might be causing this?
    someone that experienced a similar issue but was resolved bu applying a patch
    ID 1453480 - someone that experienced a similar issue but was resolved bu applying a patch
    Thanks

    Complete restart of the environment solved issue

  • How to display service for object (attachment content ) in script

    hi all
    In me23n we find services for object like attachment, private note, workflow etc...
    i need to display the attachment content in script ..
    how could i do this ? 
    any body give your valuable inputs to bring solution.
    Regards
    deepika

    Hi,
           Configure it for document type SDIORDER.
    sirish

Maybe you are looking for