Size limits Internally

Is there away to setup restriction of attachments internally between users?

On Fri, 18 Jul 2008 15:46:02 +0000, rdrucker wrote:
> Is there away to setup restriction of attachments internally between
> users?
Between GW domains, yes, via the link configuration between the domains.
Between users on the same PO? No.
Joe Marton
Novell Support Forum SysOp
Novell does not officially monitor these forums!
http://forums.novell.com/

Similar Messages

  • Write-Behind Caching and Limited Internal Cache Size

    Let's say I have a write-behind cache and configure its internal cache to be of a fixed limited size, e.g. 10000 units. What would happen if more than 10000 units are added to the write-behind cache within the write-delay period? Would my CacheStore's storeAll() get all of the added values or would some of the values be missed because of the internal cache size limitation?

    Hi Denis,     >
         > If an entry is removed while it is still in the
         > write-behind queue, it will be removed from the queue
         > and CacheStore.store(oKey, oValue) will be invoked
         > immediately.
         >
         > Regards,
         > Dimitri
         Dimitri,
         Just to confirm, that I understand it right if there is a queued update to a key which is then remove()-ed from the cache, then the following happens:
         First CacheStore.store(key, queuedUpdateValue) is invoked.
         Afterwards CacheStore.erase(key) is invoked.
         Both synchronously to the remove() call.
         I expected only erase will be invoked.
         BR,
         Robert

  • Exchange 2013 Mail Size Limits

    I am having an issue with setting the max send and receive size on Exchange 2013.  I keep getting the following error when I attempt to send a 20 meg file server to an internal exchange account OR if I attempt to send a 20 meg file from the exchange
    server to an external account: 
    #550 5.3.4
    ROUTING.SizeLimit; message size exceeds fixed maximum size for route ##
    I have checked the mail sizes and below is the report.  I currently have both send and receive set to 100MB.  Is there some other setting in 2013 that I am not aware of?
    AnonymousSenderToRecipientRatePerHour                       : 1800
    ClearCategories                                            
    : True
    ConvertDisclaimerWrapperToEml                               : False
    DSNConversionMode                                          
    : UseExchangeDSNs
    ExternalDelayDsnEnabled                                     : True
    ExternalDsnDefaultLanguage                                  :
    ExternalDsnLanguageDetectionEnabled                         : True
    ExternalDsnMaxMessageAttachSize                             : 100 MB (104,857,600 bytes)
    ExternalDsnReportingAuthority                               :
    ExternalDsnSendHtml                                        
    : True
    ExternalPostmasterAddress                                   :
    GenerateCopyOfDSNFor                                        :
    HygieneSuite                                               
    : Standard
    InternalDelayDsnEnabled                                     : True
    InternalDsnDefaultLanguage                                  :
    InternalDsnLanguageDetectionEnabled                         : True
    InternalDsnMaxMessageAttachSize                             : 100 MB (104,857,600 bytes)
    InternalDsnReportingAuthority                               :
    InternalDsnSendHtml                                        
    : True
    InternalSMTPServers                                        
    JournalingReportNdrTo                                       : <>
    LegacyJournalingMigrationEnabled                            : False
    LegacyArchiveJournalingEnabled                              : False
    LegacyArchiveLiveJournalingEnabled                          : False
    RedirectUnprovisionedUserMessagesForLegacyArchiveJournaling : False
    RedirectDLMessagesForLegacyArchiveJournaling                : False
    MaxDumpsterSizePerDatabase                                  : 18 MB (18,874,368 bytes)
    MaxDumpsterTime                                            
    : 7.00:00:00
    MaxReceiveSize                                             
    : 100 MB (104,857,600 bytes)
    MaxRecipientEnvelopeLimit                                   : 500
    MaxRetriesForLocalSiteShadow                                : 2
    MaxRetriesForRemoteSiteShadow                               : 4
    MaxSendSize                                                
    : 100 MB (104,857,600 bytes)
    MigrationEnabled                                           
    : False
    OpenDomainRoutingEnabled                                    : False
    RejectMessageOnShadowFailure                                : False
    Rfc2231EncodingEnabled                                      : False
    SafetyNetHoldTime                                          
    : 2.00:00:00
    ShadowHeartbeatFrequency                                    : 00:02:00
    ShadowMessageAutoDiscardInterval                            : 2.00:00:00
    ShadowMessagePreferenceSetting                              : PreferRemote
    ShadowRedundancyEnabled                                     : True
    ShadowResubmitTimeSpan                                      : 03:00:00
    SupervisionTags                                            
    : {Reject, Allow}
    TLSReceiveDomainSecureList                                  : {}
    TLSSendDomainSecureList                                     : {}
    VerifySecureSubmitEnabled                                   : False
    VoicemailJournalingEnabled                                  : True
    HeaderPromotionModeSetting                                  : NoCreate
    Xexch50Enabled                                             
    : True

    Hello Landfish,
    Good Day...
    The output gives the information that Size limit set for Receive and Send is 100 mb, but setting could have changed. So you can follow the below steps to resolve the issue. 
    There are basically three places where you can configure default message size limits on Exchange:
    Organization transport settings
    Send/receive connector settings
    User mailbox settings.
    To check your server’s current limit you can open Exchange Management Shell
    Try the below commands to check the Message quota size limit
    get-transportconfig | ft maxsendsize, maxreceivesize
    get-receiveconnector | ft name, maxmessagesize
    get-sendconnector | ft name, maxmessagesize
    get-mailbox Administrator |ft Name, Maxsendsize, maxreceivesize
    To change the above size limits based on your requirement.
    Set-TransportConfig -MaxSendSize 200MB -MaxReceiveSize 500MB (Size is based on your requirement)
    Attachment size limit
    To set up the rule you can use the below PowerShell cmdlet, as the method is quite simple
    New-TransportRule -Name LargeAttach -AttachmentSizeOver 20MB -RejectMessageReasonText "Message attachment size over 20MB - email rejected."
    For More info
    https://technet.microsoft.com/en-us/library/bb124708(v=exchg.150).aspx
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts @ Techrid.com

  • How to get information about limitation Internal Memory on device

    hallo ..
    have some question here, so please some person able to answer my questions 
    1. How to get Information about limitation internal memory on device 
    2. is possible to improve internal memory on Blackberry ( move apps on external memory )
    3. any tools to get internal memory activity ?
    thanks for this people who joins here, hope we can share more information about blackberry .. 

    In addition...
    There are three types of potential memory on a BB: 1) Application Memory, 2) Device Memory, and 3) Media/SD Card Memory.
    Application Memory -- This is the most crucial; it is the protected (not user accessible), dedicated, and fixed (in size) space that is available as the destination for the installation of applications (plus some application storage, overhead and such). You cannot touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can only install here...there is no option.
    Device Memory -- This is space on your BB that you can touch to store files, pictures, media, etc. Typically, it is not terribly large, but it is available to you.
    SD/Media Card Memory-- This is what it says...your SD card, for you to store files, media, pictures, etc. It can be as large as your BB OS can support...see this KB:
    KB05461MicroSD card sizes supported by the BlackBerry device software
    On some devices/OS levels, you can only see "File Free" (Options > Status), which I think is equivalent to AppMemory. On other devices, you can see all three memory usage levels (Options > Memory). Here are some guidelines to use:
    KB02843What is the Low Memory Manager feature on the BlackBerry smartphone
    KB14320How to maximize free space and battery power on the BlackBerry smartphone
    KB14213Call logs, SMS text messages, and email messages are deleted from the BlackBerry smartphone
    Lastly, it is always important to properly close applications when you are done with them. Using the Back or the Red key will not do this -- those leave it to the app to decide what to do...and some will leave themselves resident in memory, consuming resources on your BB, slowing the overall performance. Rather, to close an app, press and select "Close" or "Exit"...that will force the application to be closed, freeing up for your new use the resources it was consuming. Some apps will always remain running (typically -- BBMessenger, Browser, Homescreen, Phone, and Messages)...but, you should still close them properly - especially the Browser...if it is left on an active web page, it will not only consume extra resources but battery power as well.
    Further, anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure. Some have taken to doing this on a regular basis as a preventive measure...some as frequently as once per day. Others have obtained the QuickPull app to automate a simulated Batt-Pull.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Email attachment size limitation

    My boss has an I-Phone 4.  What is the size limitation of email attachments he can send or receive? Spoke to AT&T who said it is an Apple issue.

    Hi Shaju,
    I would suggest the following solution path:
    Execute the report (or whatever) and catch the output in an internal table. When using abap list output with the SUBMIT statement there's also an option to EXPORT LIST TO MEMORY and such. (I never used it but I've seen it working).
    Then send this output as an attachment (and not as mail text). Attachment are passed "as-is", as long there's not format conversion active for this output. If you name the attachment list.ALF and in SAPConnect you have ALF-->TXT then your attachment's going to be converted. But this should still keep your line-size of > 255.
    Best wishes,
       Florin

  • DLP Attachment Scanning - Size Limitations

    Is it documented anywhere what the attachment file size limitations are for DLP scanning?  In the ESA Configuration documentation I read:
    "To scan attachments, the content scanning engine extracts the attachment for the RSA Email DLP scanning engine to scan." 
    Can you identify what scanning engine is referenced by "content scanning engine" and what is the maximum attachment size it can process?  Also are those settings modifiable and some indcation of performance impact if they are increased to a maximum of 50 MB per attachment?
    I know you can make some modifications in the DLP policy, however it is our desire to DLP scan every document sent up to our allowable maximum email size.
    If large attachments cannot be scanned we may be forced to reduce our maximum message/attachment file size. 
    We are currently using Async O/S 7.5.1-102 and will be moving to 7.6.0 when it comes GA.

    Hello David,
    The content scanning engine in reference is the same AsyncOS scanning engine responsible or Message and Content Filter scanning. The maximum size of attachment to scan for this scanning engine is controlled by your 'scanconfig' setttings, as configured in the IronPort CLI. The default 'maximum size of attachment to scan' is 5MB.
    IronPort1.example.com>scanconfig
    There are currently 6 attachment type mappings configured to be SKIPPED.
    Choose the operation you want to perform:
    - NEW - Add a new entry.
    - DELETE - Remove an entry.
    - SETUP - Configure scanning behavior.
    - IMPORT - Load mappings from a file.
    - EXPORT - Save mappings to a file.
    - PRINT - Display the list.
    - CLEAR - Remove all entries.
    - SMIME - Configure S/MIME unpacking.
    []> setup
    1. Scan only attachments with MIME types or fingerprints in the list.
    2. Skip attachments with MIME types or fingerprints in the list.
    Choose one:
    [2]>
    Enter the maximum depth of attachment recursion to scan:
    [5]>
    Enter the maximum size of attachment to scan:
    [5242880]>
    <...>
    Any message that is larger than this limit will be skipped by the scanning engine. This would mean that pertinent DLP policys and filters would not match that same message. Naturally, allowing larger messages to be scanned will result in performance risks, as more system resources would be required to complete the content scanning.
    Regards,
    -Jerry

  • How to Get Around the Memo Size Limitations in CR ?

    I am Using Crystal Reports 2008, SQL Database and ASP .Net Visual Studio 2010 for Team Foundation with Crystal Viewer embedded in a web page.  All current update and patches area installed.
    Database has Memo Fields up to 164000 characters in length. Viewer show fine, but with the reports that have been designed to print this information, only seeing part of the Memo field.
    This happens with both RTF, Text and HTML formatted data from within the database field.
    I have read that there is a limitation on the size of a Memo field that Crystal Reports will print (65,534).
    I actually received an Crystal Reports error box when i try to concatenate multiple substring fields as a formula.
    Does anyone have any suggestions or ideas on a work-around ? 
    Due to legal considerations, this data has to be output as it was input, so it can't be hacked. It can be parsed and again merged  but I really donu2019t want to try and write SQL procedures to parse HTML code into readable multiple pieces based on variable length tags with large memo fields.
    Please offer any and every suggestion,
    Thanks to all  ! !
    Edited by: Ludek Uher on Oct 21, 2010 1:31 PM

    yes sir,
    already did but i didn't receive any answers. . .   Memo Field Size Limitations with Crystal Reports 2008 ?
    Thanks for your help.

  • How do I modify the size limitation on images in PSE 12?

      I frequently use panorama tools in Photoshop CS6 & CC and PSE 12 to generate large images (several sunsets/sunrises reach as much as 370 MB or more --- PNG or TIF without layers).  It apears that PSE 12 (and previous) have a limit less than a tenth of that.  I also understand that there is a registry fix which would allow for larger images to be displayed. 
      A) Is that so?
       B)  What is the patch?
       C)  What are the (unintended) consequences?
      I use Win 7 Pro.  One machine is 32 bit; the primary production machine, 64 bit.  Thanks

    Everything you need to know about PSE maximum sizes is in http://helpx.adobe.com/photoshop-elements/kb/maximum-image-size-limits-photoshop.html.
    The registry fix you are thinking of affects the Organizer only. The Editor has an absolute limit of 30,000 x 30,000 pixels. File size itself is not the constraining factor.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Nio ByteBuffer and memory-mapped file size limitation

    I have a question/issue regarding ByteBuffer and memory-mapped file size limitations. I recently started using NIO FileChannels and ByteBuffers to store and process buffers of binary data. Until now, the maximum individual ByteBuffer/memory-mapped file size I have needed to process was around 80MB.
    However, I need to now begin processing larger buffers of binary data from a new source. Initial testing with buffer sizes above 100MB result in IOExceptions (java.lang.OutOfMemoryError: Map failed).
    I am using 32bit Windows XP; 2GB of memory (typically 1.3 to 1.5GB free); Java version 1.6.0_03; with -Xmx set to 1280m. Decreasing the Java heap max size down 768m does result in the ability to memory map larger buffers to files, but never bigger than roughly 500MB. However, the application that uses this code contains other components that require the -xMx option to be set to 1280.
    The following simple code segment executed by itself will produce the IOException for me when executed using -Xmx1280m. If I use -Xmx768m, I can increase the buffer size up to around 300MB, but never to a size that I would think I could map.
    try
    String mapFile = "C:/temp/" + UUID.randomUUID().toString() + ".tmp";
    FileChannel rwChan = new RandomAccessFile( mapFile, "rw").getChannel();
    ByteBuffer byteBuffer = rwChan.map( FileChannel.MapMode.READ_WRITE,
    0, 100000000 );
    rwChan.close();
    catch( Exception e )
    e.printStackTrace();
    I am hoping that someone can shed some light on the factors that affect the amount of data that may be memory mapped to/in a file at one time. I have investigated this for some time now and based on my understanding of how memory mapped files are supposed to work, I would think that I could map ByteBuffers to files larger than 500MB. I believe that address space plays a role, but I admittedly am no OS address space expert.
    Thanks in advance for any input.
    Regards- KJ

    See the workaround in http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4724038

  • Is there a file size limitation to using this service?

    I am working on a large PDF file (26 mb) and I need to re-size the original and mess with the margins. I don't beleive there is an easy way to do this in Adobe Acrobat 6.0 Pro. It sounds like I have to convert the file back to a Word document, do the adjustments there and then produce a new PDF. I have two questions:
    Is there a file size limitation to using this service?
    Will a PDF to Word doc. conversion mantain the format of the orginal PDF?
    Thanks
    Tim

    Good day Tim,
    There is a 100MB file size limitation for submitting files to the ExportPDF service.  As for the quality of the conversion, from our FAQ entitled Will Adobe ExportPDF convert both text and formatting information?:
    Adobe ExportPDF is capable of exporting high quality information, but the quality of your Word or Excel document depends on the quality of the PDF file you start with. For instance, if your PDF file was originally authored in Microsoft Word or Excel and converted to PDF using the PDFMaker functionality of Adobe Acrobat®, your PDF file contains a rich set of information that can be captured by Adobe ExportPDF. This includes relative positioning of tables, images, and even multi-column text, as well as page, paragraph, and font attributes.
    If your PDF file was originally authored using simpler PDF generation methods, such as “print to PDF” or “scan to PDF” options, Adobe ExportPDF will convert any recognizable text and then use sophisticated conversion intelligence to preserve as much of the page layout as possible.
    Please let us know if you have any other questions!
    Kind regards,
    David

  • Input file size limition in File Reader Adapter

    Hi,
    We have a File Read Activity(using File Reader Adapter) which works on a Polling model. Whenever a input file is found in a designated directory it invokes our BPEL web service. During load testing we found out that if input file size exceeds 7 MB then we get "insufficient heap space" error. We found a reference to this size limitation in http://download.oracle.com/docs/cd/E11036_01/integrate.1013/b28994.pdf which has below lines..
    "Files that are 7MB or larger in size cannot be delivered. As an alternative, you can debatch large files (if they have multiple messages), and publish these files in messages of size less than 7 MB. This alternative is applicable only to structured files (comma-delimited or fixed position), which contain more than one message. It is not applicable to binary or XML files."
    Our customer will have the data in XML format and the size of the files will be pretty huge(running into 49, 69 MBs). Do we have any workaround here or we are left with no option but to ask the customer to split the files and load it? The later option is currently difficult one for the customer since when split there is a possibility of XML becoming invalid. Any pointers in this issue is appreciated.
    Thanks!
    Balaji

    Hi,
    BPEL can not process more than 7 MB size xml structred file. but,debatching will work for xml files also provided if the file has repeated multiple structures (means multiple repeated root elements).
    Regards,
    Dhanumjay

  • Maximum message size for internal users

    Hi,
    Is it possible to configure a maximum message size for internal users and also create exceptions?
    The templates available in Transport Rules only allow for "when size of any attachment is greater or equal". This is not ideal as users can add 50 X 1MB attachaments to an email etc.
    Configuring Transport settings or Receive Connectors do not allow for exceptions.
    Thank you.

    Hi Prakash,
    Thanks for the link to the thread. The AD site link configuration is valid but does not account for the required exceptions. E.g User A can send unlimited size message to User B but not to User C.
    The thread also mentions the Transport Rule configuration stated in my original post but that configuration has one major flaw. Users can circumvent the control by splitting attachments.

  • Increasing Email Size Limits for some users

    Hi All,
    For some users (management) i needed to arrange that they are able to send bigger files then the default 10MB limit to each other.
    I used this procedure to do so,
    https://www.simple-talk.com/sysadmin/exchange/increasing-email-size-limits-for-your-high-profile-users-in-exchange-2010/
    In a nutshell:
    Set Global Transport Org. Config to 200MB
    Set Transport Send and Receive connector to 200MB
    Created a Distribution group adding the MT members and me (for testing)
    Created a transport Rule for the 10MB limit for all users and exception for the distribution group
    (Believe me, i am not happy with the 200MB size limit)
    All seems to work but i have one issue that i cannot tackel or maybe it is by design.
    -Managemant can also send big files to all
    users who do not have this privelige, this is not someting i want, sending 100MB+ attachments to over 150 users.
    Is this by design or do i mis something?
    Thanks,
    Ron

    Hi RonGielgens,
    Attachment size in exchange has to be set on
    Global settings
    Connectors (send and receive connectors)
    Mailbox
    The global settings will affect all the others. of course connectors will affect specific servers and mailbox one user. You have to set the global to the absolute max size you want to allow in your organization.
    after you do this you will need either to set the 10MB on each mailbox
    Get-Mailbox | Set-Mailbox -MaxSendSize 10MB -MaxReceiveSize 10MB
    Then change the limit on specific mailbox
    or another way is to create a transport rule that will reject the email if the attachment size it > 10MB unless the sender/recipient is the required user or group.
    so basically create 2 transport rules
    1. reject messages sent to anyone with attachment > 10mb unless the recipient is userX
    2. reject messages sent from anyone with attachment > 10mb unless the sender is userX
    Normal case it should not allow.
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • PDF file size limited to graphics memory in Reader?

    I've created a form (in LiveCycleDS) that allows for an unlimited number of photos to be loaded into it. I put an image into a subform that is duplicated every time a user clicks a button thus creating an unlimited number of images that can hold photos. I then extended it with Reader Extensions.
    I'm running into a problem when I try to load a large number of photos into the form.  It gets to about 47MB of images when it locks-up Adobe reader.  I've been able to bring up other applications after the lock-up and when I switch back to Reader the artifacts of the other application are then displayed within Reader.
    What is the practical limit to the size of a file created with LiveCycle?  Is it tied to the amount of graphics memory a computer has?  My machine has 2GB of RAM while my video card has only 384MB.  I haven't been able to figure out if there is a file size limitation.

    It's entirely normal for file size to increase. PDFs are much more compressed than print streams. For some printers the print size is almost constant (a huge bitmap), for others, it's a collection of graphical items and the size varies enormously. Rarely anything you can do.

  • Is There a size limitation for sending e-mail photos

    I am using the latest version of MS Entourage and my mail account is with .MAC
    Yesterday I highlighted two pictures in iphoto and clicked the e-mail icon but was then unable to send the mail. I got an error message. I deleted one of the phtos and still got the error.
    I then discovered the size dialog box and clicked "small" and was able to send one photo.
    I can receive mail with up to 20 attached Jpg items, But can't forward the same e-mail message. Is there a size limitation in Entourage or in .mac.
    Thanks

    There is no such limit with Entourage or Apple's Mail application but email account providers have an overall message size limit for received and sent messages.
    .Mac has an overall message size limit of 10 MB for received and sent messages which is a typical limit but I have a few friends and business associates who have a smaller overall message size limit of 5 MB. Although I can send a message that is up to 10 MB in size with my .Mac account, the message will not be accepted by the incoming mail server for the friends and business associates with a 5 MB message size limit.
    All files attached to a message must be encoded before being sent and decoded when received. Most email clients such as Entourage and Mail use MIME for attachment encoding/decoding which is the internet standard. A problem with MIME is it isn't very efficient. The encoding process increases the size of the pre-encoded file by roughly 50% of so. A file that is 5 MB in size (pre-encoded) will be roughly 7.5 MB in size due to the encoding process.
    What was the exact error message provided?

Maybe you are looking for