Size matters. How can I tell the length of an edited clip?

I knew the length of my clip when I launched it in to the Timeline, but, now that I have cut out all the bits I don't want, is there an easy way to determine the new, shorter duration of my clip?
I tried selecting the parts I wanted to time in aggregate, (perhaps one person speaking, for example ) but my right click revealed only the time of the severed portion of the clip beneath my cursor.
I can write down the beginning time of the clip, deduct that from the time shown at the end of the clip, and arrive at a time for that specific segment that way, but ii seems laborious. Also I have to use a wooden thing called a pencil.
Thank you
Allosaurus

David........
That is wonderful. Thank you for the prompt reply. I tried it immediately and, of course, it works beautifully. Thank you again.
Allosaurus

Similar Messages

How can I tell the length of an overall project in Captivate 5?

In Captivate 4, the project length appeared in the bottom left of the screen when you first opened the project. By project length I mean the total time of all slides added up.

Hi,
Normally it takes care of everything. Have a look at this blog post to have more details:
Captivate patch
Lilybiri

How can I tell the download size in mb of a movie before I purchase it? running short on storage space. Specifically American Horror Story II.

how can I tell the download size of a movie, in mb, before I purchase it? specifically, American Horror Story II. Need to see if i have enough storage left for download. thanks.

When you select the film, the size of each episode is under the titile.
Example:
1. Welcome to Briarcliff
46minutes, 1.98 GB for HD format, 622 MB for SD format.

"Volume not found" I have 3 iphoto_libraries stored in a external disk, while the actual files are in other external disk. Ive moved together iphotolibraries and files but: HOW CAN I TELL THE LIBRARIES WHERE TO FIND THEM NOW?

I have three iphoto_libraries stored in a external disk PASSPORT (one for each trip imovie Im making -Ive managed this way the libraries so to not confuse the trips) while the actual files are in OTHER external disk LACIE. And everything was fine: imovie find each library, could work with it, or iphoto could edit the files.
But one day everything crashed at the same time: i opened iphoto to find 3 different scenarios:
1) iphoto_library GREECE was there, but not the albums i prepared. no events. when double click in any of them: "Volume not found"
2) iphoto_library ITALY was there, and the albums i prepared too, but empty.
in both cases I can only see the photos in 'photos' because 'events' shows some events with photo preview and some with no preview, just some kind of preset clipart palm tree, but if i enter the event, photos are there but again: when double click in any item: "Volume not found"
3) iphoto_library ISRAEL was there, the albums too, when double click in any of them: all OK
The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT. Also: I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied. Also i have all the movie_libraries in the PASSPORT as well. What happened??
Solution? Nothing yet. Ive moved now all the photo folders from LACIE together in PASSPORT with the iphotolibraries but problem persist:
HOW CAN I TELL THE LIBRARIES WHERE TO LOOK FOR THE VOLUMES NOW?
"Volumes" are the original files aren't them?
Please help. this is so annoying to try and find in the forum, to tricky to explain
I have a Macbook pro retina Yosemite 10.10.1 / iphoto 9.6 (910-29)/ iMovie 10.0.6
THANK YOU
Vicky

The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT.
This is not clear, especially when you say
I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied.
Especially as the message you're getting is typical of a library where the ' option "copy to file" or something like that' is unchecked.
So it's a simple question:
Are you these Managed or Referenced Libraries?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

How can I tell the device is connected to itunes 12?

how can I tell the device is connected to itunes 12? I have Windows 8. I hear that the device is connected, but don't see the device to manage. Only thing that happens is on the phone it says Trust the computer.. I say Trust and nothing happens.

in ituens at the top where you see the small icons for Music, Movies, TV etc when your device is connected you will see a small icon representing your phone or ipad etc popup click that and it will show you the usual interface for backup and syncing.
if that doesnt happen, like it didint for me initially, you should close itunes fully via task manager if you know how to do this and start it again with the device unplugged then plug it in after itunes has finished loading.
Worst case scenario you nee to resatrt

How can I adjust the length of a note? Please help.

How can I adjust the length (the sustain time) of a note after I have selected the note? Many thanks.

Just drag the right end back and forth (mouse over the end of the note - a ] appears) - by holding down ctrlshiftdragging you can change the subdivision into ticks. In the Midi event editor you can do it numerically - just change the numbers displayed in the length section.

How can i change the length of a narration ?

how can i change the length of a narration ?

hotts77
Thanks for the reply.
Still not sure what version of Premiere Elements that you are using. But, the following should apply nonetheless
What you describe is what I have described in my blog post and for which I have discussed all aspects of the issue. There
is no workaround to force the program to give you more than you are getting now without other clips also on the track(s). The
blog post just about says it all.
You might have to weigh the pros and cons of
a. Recording your narrations as .wav files in a free audio editor such as Audacity
Audacity: Free Audio Editor and Recorder
and then importing those into your Premiere Elements project with Premiere Elements' Add Media/Files and Folders/Project Assets from where you drag the narration to the Narration Track.
b. Put any video clips on the Timeline when you are recording your Premiere Elements narrations with its Narration Tool. Then remove these video clips and replace them with the real thing when you are ready to put narration and clips into the project.
Please let me know if you are OK with the details.
Thank you.
ATR

When I move a RAW file from IPhoto to my desktop or Photoshop it changes to a jpeg and reduces in size. How can I get the Raw file across?

When I move a RAW file from IPhoto on my macbook pro to desktop or Photoshop it changes to a jpeg and reduces in size. How can I get the Raw file to move across?

I create separate folders based on the year and then the actual date of when I take images. You can make those folders anywhere on any hard drive that is connected to your Mac whether internal or external. I also use the Photoshop Photo Downloader that is included with Photoshop/Bridge and it will create the date folder so all I do is create a Year folder.
Open Bridge or click on the Bridge icon in PS and in the File menu item in Bridge select "Get photos from Camera". It can be a camera connected to your Mac or a memory card from a camera. A window will open and you then select the camera or memory card. Set the location they will be downloaded to, just the folder and you can Browse to a folder that you created, then in the "Create Subfolders drop down select what date stamp you want to use or or custom name or not to create subfolders at all.
I've never cared for iPhoto one bit. I tried it but found it way to restrictive. It likes to have full control over how you interact with your images.

How can I know the length of the image data section of a PSD file

I'm a C++ programmer developing a project to parse PSD files, and it's necessary to know whether there is a length field indicating the length of the image data in image data section of a PSD file, if not, how can I know the length?
Thank you.

Sorry I can't help, maybe there is some information in the SDK?
http://www.adobe.com/devnet/photoshop/sdk.html
Or someone might be able to help in this forum?
http://forums.adobe.com/community/photoshop/photoshop_sdk

How can you tell the difference between ipad 2 and ipad 3 ?

I need to know how can you tell the defferance between the Ipad 2 and Ipad 3 by just looking at it ?

Well it hard to tell if you don't have the two side by side and compair it to...

How can I shorten the length of my ringback tone?

How can I shorten the length of my ringback tone?

You mean music that the caller hears when they call you? You'll have to contact your carrier. That's a carrier feature, not a function of the phone.

How can we tell the printer to use a different paper cartridge

Hello all,
We are using t.code MN05 to assign a printer to each Purchase group. How can we tell the printer to use a different paper cartridge so that purchase orders ( output type ZNEU, ZEU, ZEN) can be printed on a paper with company logotype. Local team are removing most of the printers an we have only one multifunction printer availabel for a large number of employees.
Thank you for your suggestions

Hi,
I can help you about how to use different Paper Tray's but different cartridge case I am not sure...

My ipad is barely charging - how can i tell the difference between iphone 6 charger and ipad

my ipad is barely charging - how can i tell the difference between iphone 6 charger and ipad

See the following page for info on all of Apple's chargers (you'll need to scroll down a bit on that page):
Charge the battery in your iPad - Apple Support

How can I tell the VMware GdbServer stub to set a processor core during kernel debugging session?

I'm using the VMware DbgServer stub for kernel mode debugging a Windows X86 VM and I want to set a different thread (or processor) in order to get/set the processor context, but the DbgServer replies that the target only has one thread running.
(gdb) info threads
Sending packet:
$T1#85...Ack
Packet received: OK
Sending packet: $qfThreadInfo#bb...Ack
Packet received: m1
Sending packet: $qsThreadInfo#c8...Ack
Packet received: l
Thread 1 ( Name: VCPU 0 ) 0x81626a08 in ?? ()
Questions:
1. How can I tell the VMware DbgServer stub to set a processor core or even another thread during kernel debugging session?
2. How can I set/get context or stepping from a different thread or processor core?
Any help will be highly appreciated.
Thanks,
Alex.

Nick-
In my experience, the only tell is in the result with Lightroom unless your processor is dog slow. You can select PS as the active app. on my Mac and see it working.
You could also modify the action to not save and close, and then check History in PS.

HT4060 How can i tell the difference between chargers

How can i tell the differance between chargers

Believe it or not, they are identified right on the chargers themselves. Unfortunately, the font is real small and the print is gray on a white background. It's nearly impossible to read. You need a bright light and a magnifying glass!
After determining which is which, you might wish to put your own paper labels on them.

Size matters. How can I tell the length of an edited clip?

Similar Messages

Maybe you are looking for