Size mismatch between composition and imported vide clip :-(

Hi from 21 degrees C york UK
This link illustrates my problem:http://i216.photobucket.com/albums/cc53/zymurgy_bucket/misfit-video-clip-langleys-glitch_z pseec728d8.jpg
Somehow my After effects comp is hugely bigget than my video clip, I'm so confused tghis hasnt happened to me before & my head is spinning. Basicall the final out put is for YouTube but I just cannot get the After ex composition to scale down to fit the size of the YOUTUBE clip :-(
Any help very very appreciated!
Grazie,
David

I have since figured this out... you have to drag the composition over from Pr to Ae as illustrated here: (It then becomes "dynamic" )
http://i216.photobucket.com/albums/cc53/zymurgy_bucket/dont-loose-film-fx-after-effects_zp s33d22a32.jpg

Similar Messages

Font size changes between Export and Import

Captivate v5.5
My office in Germany is translating existing project from English to German.
They export a slide from v5.5 to be translated (in Word)...make the required translation and then import it back into Captivate v5.5
Problem is the original font size when exported is Tahoma Regular 11 but when the translated document is imported it arrives back in Captivate as Tahoma Regular 10.
The font size during and after the translation is Tahoma Regular 11. The change to size 10 is happening during the import into Captivate v5.5
Any ideas why and how to make sure the font keeps the same size (11 in this case) when imported ?
Noel

Auto Rescale Captions in the CP - file
I always turn it off by default, but turn it on when having to import translated captions:
Lilybiri

Print size mismatch between Photoshop and printer

I am using Photoshop CC on a Mac Maverick and now Yosemite and have a problem in that Photoshop print settings does not match the paper size I have selected. Photoshop has 15.722 in x 20.361 in while I have 8.5 x 11in selected. If I select a different printer the results are the same. If I save as a PDF and print from preview it prints fine. Any thoughts?

I have since figured this out... you have to drag the composition over from Pr to Ae as illustrated here: (It then becomes "dynamic" )
http://i216.photobucket.com/albums/cc53/zymurgy_bucket/dont-loose-film-fx-after-effects_zp s33d22a32.jpg

Mismatch between availability and marker

I have run the following command:
/repvfy -detail -fix -pwd password
and am seeing a section called "Mismatch between availabiltiy and marker". What does this mean? I know there is a bug out from Note: 735957 against 10.2.04 and that patch 6951116 is available. I also know this bug is fixed in 10.2.0.5. But I don't know what exactly this section is telling me. Here is the output I am seeing:
6. Mismatches between availability and marker
TARGET_GUID TARGET_NAME TARGET_TYPE MARKER_AVAIL_STATUS MARKER_TIME CURRENT_STATUS START_TIME
9CB8EE19415C3C6B55954BF3346C1106 ssan-Internal Concurrent Manager oracle_apps_icm 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:22
1B21AAEF5AC63DD44FE339B7852EA1EE ssan-Report Server_ssan_devstar2 oracle_apps_reports 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:13
F5EAD749526EC1116A70157771E3D011 ssan-Oracle Workflow Agent Listener oracle_apps_wfalsnr 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:29
CD32714673BC508CDBF85BF191A5A1B7 ssan-Workflow Background Engine oracle_apps_wfbg 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:26
FADA1D6BF4DFD0E8AA1739A6666BA210 SSAN oracle_database 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:40
0BE2ACE2EDC7271744DA1A249E30C9A5 APPS_ssan oracle_listener 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:12
89D241EEEF24821E30AD66741BC3D433 devstar2.rtd-denver.com oracle_listener 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:20
F40BAF501645A5957A498E7A270AEA47 ssan-Apps Listener_ssan_devstar2 oracle_listener 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:28
8 rows selected.

Various provision like Freight, transport etc .
these should go to separate GL accounts. if you give wrong account assignment value will be passed to GRIR. then difference will happen
sunoj

Mismatch between sound and video

When I watch a movie in iTunes of Apple TV (2gen) and I want to move it few seconds/ minutes and more backwards then it like "losing its mind",
the video jumps forward (a lot forward) and the sound stays the same, so ther is mismatchment between sound and video.
What can i do to solve this problem?
Thank you!

Am I the only one suffering this issue with the video transcoding?

Color mismatch between CS4 and Canon PIXMA PRO6500

Hi there! I am trying to research if anyone else is having a problem with color mismatch between CS4 and their printer. Last night I printed a .tiff image out of CS4 to my Canon PRO6500 printer and the sky came out purple / pink! It was supposed to be a stormy grey color. I have the color management turned off on the printer settings. I have CS4 manages color turned on and the correct ICC profile selected for the paper I am using. When I do a soft proof in CS4 the image looks fine, but when I print I get something completely different, mostly with the sky (purple / pink) color! Just for the heck of it I did a Print Preview under my Page Setup and guess what, the sky actually shows purple / pink! So I have no idea what's going on. I checked all my setting, ink cartridges, tried different paper with the appropriate ICC profile and no dice. Still have a goofy looking sky! I thought PROOFING the image is supposed to show you how the printed image is going to look? apparently it doesn't because it's not. The Print Preview has an accurate representation of the print but I have no idea where the pink / purple sky is coming from. They are supposed to be stormy clouds as I said. I appreciate any help anyone can provide .
Sabciu

I have the color management turned off on the printer settings.
But do you have a measured color profile based on a sample print? Most likely not, so this is not doing anything in your favor. The current profile may present the defaults for a given printer, but not the actual density based on your other printer settings. So by all means, unless you can be sure to obey a full calibration throughout, turn on the printer CM. Also, since it is a Pro model, you may actualyl have to use the dedicated RIP software that was bundled with it to get correct results, not the default windows print engine.
Mylenium

Config mismatch between VSM and VPath - CSCum76142 bug

Hi all,
I got the error message "Config mismatch between VSM and VPath" on my Nexus VSM but I could not see any detail regarding this bug ID due to permission issue. Has anyone else got access to see this bug detail and able to share? I need to know if this bug is critical or just cosmetic. Thanks
regards,
Robin

Hi Robin,
This DDTS was Junked. But here's the workaround that is mentioned:
1. Deleting the vservice config (no vservice) & reconfiguring vservice, will get rid of this mismatch issue.
2. Toggling the port-profile should also work.
I see couple of other DDTS as well related to this and i would suggest to ask this question in "Other Data Center Subjects" forum for detailed and quick answer.
CSCtz36835 :Config mismatch on VSM and Vpath after deleting service vlan
Regards,
Kanwal
Note: Please mark answers if they are helpful.

Contrast mismatch between Organizer and Editor

I can edit an image in Editor to where it looks great, to include the contrast, brightness, shadows, etc. When I send it back to the Organizer, it look much too contrasty and dark. When I use the same images in a slideshow originating in Organizer, they still look too contrasty. Is there a way to correct this? I'm using PSE 10 on a Windows 7 -64 bit machine. Thanks for any ideas.

Thanks for your quick response. I just checked out the settings in both the Editor and Organizer and they're both set on "let me decide". I'm not sure what to do on that one. I could go with optimizing the computer screen with sRGB, or the Adobe RGB for the printer, or no management, or decide on the fly. If I go with the computer, I guess I'd have to change it when I print a photo out, and vice versa. Have any suggestions for me? Thanks again.
New update. I have a Dell color laser printer, and I just checked the manual. It offers both sRGB and AdobeRGB. My priority is really to have a good printout. If I check sRGB I should be safe for either print or computer, but I'm wondering if I'd get as good a printout with sRGB as with AdobeRGB. The easiest might be to see what the printer is curently set on, and then set PSE Organizer and Editor to match it. I'll do that, and then see if that helps the mismatch between Organizer and Editor.

Data mismatch between 10g and 11g.

Hi
We recently upgraded OBIEE to 11.1.1.6.0 from 10.1.3.4.0. While testing we found data mismatch between 10g and 11g in-case of few reports which are including a front end calculated column with division included in it, say for example ("- Paycheck"."Earnings" / COUNT(DISTINCT "- Pay"."Check Date")) / 25.
The data is matching for the below scenarios.
1) When the column is removed from both 10g and 11g.
2) When the aggregation rule is set to either "Sum or Count" in both 10g and 11g.
It would be very helpful and greatly appreciated if any workaround/pointers to solve this issue is provided.
Thanks

jfedynic wrote:
The 10g and 11.1.0.7 Databases are currently set to AL32UTF8.
In each database there is a VARCHAR2 field used to store data, but not specifically AL32UTF8 data but encrypted data.
Using the 10g Client to connect to either the 10g database or 11g database it works fine.
Using the 11.1.0.7 Client to go against either the 10g or 11g database and it produces the error: ORA-29275: partial multibyte character
What has changed?
Was it considered a Bug in 10g because it allowed this behavior and now 11g is operating correctly?
29275, 00000, "partial multibyte character"
// *Cause: The requested read operation could not complete because a partial
//          multibyte character was found at the end of the input.
// *Action: Ensure that the complete multibyte character is sent from the
//          remote server and retry the operation. Or read the partial
//          multibyte character as RAW.It appears to me a bug got fixed.

How keep size relation between p and h1?

Hi!
In my Reset it says "font-size:100%" for both my p and h1. In Explorer, the h1 is bigger than p (as it says it should be in my style sheat), but in Safari (used in Iphone), the h1 is smaller than p. What can I do in Reset in order to keep the size relation between p and h1 in different browsers?
Greatful for answer!
Milda

h1 { font-size:140%; }

Timing mismatch between picture and sound.

I have been using Premier Element ver. 12 with my films recorded with my Canon EOS camera without any problems. I have now been trying to clip a film recorded with a MAC copmuter. The files have .mov extension. My problem now is, that the sound and the pictures are not sycnroniced anymore. It seems that the Pictures are 3 seconds faster per minute than the sound. So after 20 minutes the Pictures are 1 minute in front of the sound. Playing the original files with the Windows player Works fine and the timing of the sound in Premiere Elements fits with sound using the Windows player.
Any Ideas????
Gert Munch

Hi' ATR
Ref. #8
Loading one of the problem files into Movie Maker Shows a small but constant shift between sound and Video within Movie Maker. Easy to fix. Exporting and import into Premiere Elements shows the same small but constant misallignment. That is good.
The screenshots of the required readings is seen below
Properties from Premiere Elements:
I did not dare to install the MediaInfo properties readout program as I was warned about malware.
Ref. #9
From Movie Maker the Video bitrate is stated to be:
15-12-14: 177232 kbps
12-01-15: 81164 kbps
16-02-15: 177396 kbps
10-03-15: 280596 kbps
From the above screen shots the audio bitrate seems to be 128 kbps
Hope this makes sense to you.
Gert

To check whether there is any size mismatch between columns of two tables

Hi,
Here i got two tables T and M where i am going to migrate data from T to M. But before migrating i need to check whether all the data in source table fits into destination table columns. The datatypes of all columns in source table T is of Varchar2 only as it is a temp table.
Ex :- Table 'T' (Source table) with columns
T_Lat Varchar2(50);
T_Amt Varchar2(50);
T_Cat Varchar2(50);
T_Vat Varchar2(50);
Now I have another table 'M'(Destination Table) with columns
M_Lat Varchar2(50);
M_Amt varchar2(25);
M_Cat date;
M_Vat number;
Now my task is I have to do a prevalidation of the data in 'T' that whether all the data in those columns will suit for the destination table columns respectively (to check whether there is any size mismatch). This check should be done dynamically.
For suppose, in T_Amt(source column of T table) if text is abt 50 characters, it cant fit M_Amt(destination column of M table). In this case it should throw an error indicating that destination column size is less for the source column.
Note:- There is no unique mapping column for these two tables and there are about 400 columns in the source table to be validate
I think it can be done using arrays or plsql tables.
Can any one help in this regard.

>
Now my task is I have to do a prevalidation of the data in 'T' that whether all the data in those columns will suit for the destination table columns respectively (to check whether there is any size mismatch). This check should be done dynamically.
>
Just because the source table T_Amt column is defined as 50 doesn't mean any of the data is really that long. So the data itself needs to be checked. That is just what a simple query can do.
See my answer in this thread Posted: Jul 25, 2012 1:14 PM
Re: Help in Execute Immediate - Invalid relational Operator
Here is the modified sample query and results for a query of a clone of the EMP table with some modified data
select count(*) cnt,
       -- job column
       sum(case when job is null then 1 else 0 end) job_nul,
       sum(case when job = 'SALESMAN' then 1 else 0 end) job_salesman,
       min(length(job)) job_minlength, max(length(job)) job_maxlength,
       min(job) job_min, max(job) job_max,
       -- hiredate colulmn
       sum(case when hiredate is null then 1 else 0 end) hiredate_nul,
       min(hiredate) hiredate_min,
       max(hiredate) hiredate_max
        from emp1
CNT JOB_NUL JOB_SALESMAN JOB_MINLENGTH JOB_MAXLENGTH JOB_MIN JOB_MAX HIREDATE_NUL HIREDATE_MIN HIREDATE_MAX
14    2       4            5             9             ANALYST SALESMAN 0            9/28/0001    12/3/9999With one query and ONE pass thru the table I was able to get the COUNTs, the MIN and MAX values for each column and the MIN and MAX lengths of the VARCHAR2 columns.
There are 14 total records, 2 where JOB is null, 4 where the JOB is SALESMAN. The MIN length of the JOB data is 5 and the MAX is 9.
Look at the date values. The results tell me I have some problem data.
The length data tells me if I try to put the JOB data into another table I need to define the length as at least 9 or it won't fit.
For your use case you might find that all of the data in the T_Lat column is shorter than 26 and will actually fit into the M_Lat target table column.

Data mismatch between TABLE and Std. Extract str. (AFPO & 2LIS_04_P_MATNR)

Hi,
I am getting data mismatch in ECC standard table and ECC standard extract structure. Please help me.
I am using 2LIS_04_P_P_MATNR data source (standard extract structure).
I have following data in ECC Table (AFPO - Order Item).
AUFNR (Order Number) --> 4000460
PGMNG (Total planned quantity) --> 0
PSMNG (ORDER QTY) --> 2000
Extract Structure is showing following data.
AUFNR (Order Number) --> 4000460
PGMNG (Total planned quantity) --> 2000 (It should be zero)
PSMNG (ORDER QTY) --> 2000
I have checked with many other order numbers. The extract structure in RSA3 is showing correct values only if PGMNG is non-zero values. If PGMNG is zero, then it is automatically assigning PSMNG value.
Is this common? I want to display correct values for PGMNG from AFPO Table. Why this mismatch between table data and extract data. I have done all required steps refreshing data (deleting setup tables, filling set up tables etc.).
pls suggest. Poinsts will be assigned to every useful answer.
Thanks in advance.

Hi Avneet,
I have a similar problem where in AFPO shows value 1000 in PSMNG field and 1200 in RSA3 for extractor 2LIS_04_P_MATNR.
I have found that the standard feature of the extractor extracts the data at the time of release of process order. If the process order is changed after the release then the extractor will not picup the chagne.
Ex: AFPO value 1000 ---BI Value 1000
Now released in ECC
AFPO value 1000 ---BI Value 1000
In ECC value changed to 1500 after the release. BI will not pickup the change.
Extractor is pulling the data from MCAFPOV table. You can check the values, there it matches with RSA3 values.
I was just going thru forums for the solution. After i found the solution. I am just updating it.
Hope it helps you.
Thaks
Srikanth

DataSource / Structures mismatched between Dev and Test Systems. ..!!

Hi,
We are doing a scenario. Where XI will update the data into PSA through ABAP proxy.
Scenario worked perfectly in development system.
We transported the objects from Dev to test. The Strucures are mismatched in SE11 between development and Test systems as below.
Data sources (ZDS_RECIHDR and ZDS_RECTPALL) looks ok. But when I saw the structures in SE11 they are not correct, they got mismatched.
Development:
/BIC/CQZDS_REC00001000 - Header (ZDS_RECIHDR)
/BIC/CQZDS_REC00003000 - Allocation (ZDS_RECTPALL)
Test:
/BIC/CQZDS_REC00001000 - Allocation (ZDS_RECTPALL)
/BIC/CQZDS_REC00003000 - Header (ZDS_RECIHDR)
Kindly let me know where it might have gone wrong?
Thanks
Deepthi

We done it already. Still it is failing.
While transporting, it is failing and showing the error as
Program ZPI_CL_IA_PAYMENT_ALLOCATION1=CP, Include ZPI_CL_IA_PAYMENT_ALLOCATION1=CM001: Syntax error in line 000016
The data object 'L_S_DATA' has no component called'/BIC/ZSALENUM', but there is a component called
Program ZPI_CL_IA_PAYMENT_HEADER======CP, Include ZPI_CL_IA_PAYMENT_HEADER======CM001: Syntax error in line 000016
The data object 'L_S_DATA' has no component called'/BIC/ZTRANDATE', but there are the following com
The Structure is mismatched in SE11 between header and allocation structures. That is the reason it is failing.
Any more ideas pls?

Size difference between 60GB and 80GB?

Is there a size difference between the 60GB and 80GB iPod with videos? I was looking at a Belkin Tunepower power source for my iPod and it said it has sleeves for 30GB and 60GB iPod videos, but I just checked the Apple store and they only sell 30 and 80 gig iPods. Will my 80GB fit the 60GB sleeve?

Your 80 GB ought to fit the 60 GB case, since the exact dimensions of both iPods are identical:
60 GB: 4.1 x 2.4 x 0.55 inches
80 GB: 4.1 x 2.4 x 0.55 inches
Of course, if you are using a 30 GB, that would be different, since the 30 GB is a little thinner than the 60 and 80 GB models of Fifth Generations.
-Kylene

Size mismatch between composition and imported vide clip :-(

Similar Messages

Maybe you are looking for