Size of edit window

I was replying to a post and noted the edit window scrolling left to right. I checked my screen resolution and noted that my children had lowered it to 1024x768 from my usual 1280x1024.
Why doesn't the edit window scale itself to the screen resolution? Either that or make it less wide to accomodate the not so small size of 1024x768 for those users whose eyes are not what they used to be.
Does this happen to anyone else, or am I alone in my experience?
hopper

Hi there
shunithD wrote:
We all accept that... but, as 'Moderators' you could:
1/ Raise your voices and complain to Adobe about the situation
What makes you think we haven't? There are other channels than what you see here you know.
shunithD wrote:
2/ Resign / threaten to resign your moderatorship until it's fixed
I've been part of support forums for longer than I care to remember. I see it as I do the software I use. Sure, there are spots that drive me crazy. But it's what we have for the moment. I'm not going to stop helping my fellow users just because of the forum issues. But I guess that translates to being an Adobe apologist in your eyes.
shunithD wrote:
3/ Take a more proactive stand instead of being apologists and banning the more vociferous protesters - who anyway seem to complain only here and not in the product forums. BTW has anyone noticed this point?
Again, I've never banned anyone. Only Adobe can actually do that. And even then, it happens only after folks recommend someone be banned. I've not done that either. And again, I do recognize that you were generic with the comment and said "moderators" and not just me. As for the complaints being here, well, this IS the forum comments area. So if you are upset with the forums, isn't this the place to express that? Mind you I do feel that some are abusive with the expressions.
I've made no efforts to cover the fact that to me, the Jive forums are an improvement overall when compared to the FuseTalk forums I experienced before. So unlike many here, I come from a totally different frame of reference. It doesn't mean I think the Jive forums are as good as they should be and that they don't have issues, but they are better than what my software product areas had before.
Cheers... Rick

Similar Messages

How to show photos at 100% size in the Edit window?

Background: I am using iWeb 1.1.1 to re-make my .Mac Homepage website; I love this newer, more flexible application and I love using iPhoto 6.0.4 with it.
My iPhoto 6.0.4 question:
How can I get the photos to show in their maximum size in the Edit box? There are some photos that I want to show as large as possible or even enlarge, and when the photos show at smaller than their exposed size, I feel disadvantaged.
I welcome any advice you send. I am feeling a bad crunch right now because my graphics program of choice, Photoshop Elements 2, is not opening up for me (It's been stopping at the point where the message says: "Photoshop is not sending any personal information") and I cannot find the CD right now. It's here somewhere but...........
— Lorna in Southern California

I welcome any advice you send. I am feeling a bad
crunch right now because my graphics program of
choice, Photoshop Elements 2, is not opening up for
me (It's been stopping at the point where the message
says: "Photoshop is not sending any personal
information") and I cannot find the CD right now.
It's here somewhere but.........
This is very easy to fix. There are many threads
here, at the Adobe forum and in any forum where PE is
mentioned. Quit PE, then take your computer totally
offline (unplug the ethernet cable, shut down airport
if that's what you use). Now launch PE, then go to
Preferences>Adobe Online and set Check for Updates to
Never. There never were any, never will be now for PE
2, so you won't miss anything.
Barbara..... if there never were any updates to PE2 and never will be any, then why would I need to disallow updates?
BTW, I discovered how to get the picture to show up full size. iPhoto 6 is different than iPhoto 4, and while experimenting with some edits I discovered the Small Head — Big Head toggle bar in the Edit Window, and that was my answer.
— Lorna in Southern California

Discoverer Plus workbook editing window size

Is there a way to make all (or at least a few) workbook editing windows open as full screen (or larger than the default) ???
Each time I edit something in a workbook, I have to resize all the windows I open and it's kind of annoying.
Thanks
Michael
PS : I'm using Plus 10g release 1

Well, I hate to say it, but you may have run across a bug in your version of Discoverer Plus. I am on 10.1.2.54.25 and the word wrap works just fine when printing a worksheet out of Discoverer Plus in that version. I even retested it just now just to verify, and it printed just fine, and the way you would want it to print. So my suggestion is that you log a service request for this issue with support and see what they say. Good luck.
John Dickey

Smartforms-Dynamic Change of Font Size in main window

Hi Friends,
How shall I be able to change dynamically the font size in main window of smartform. If the records are more in main window then the layout comes in 2 pages but if less in 1 page. So I want to decrease the font if the records are more to assign it in 1 page.
Eg : I can print only 10 lines in 1 page of main window, but if the records exceed 10 lines it is going to next page, so I want to shrink the font size to maintain the layout in 1 page.
Thanks & Regards,
Somen
Edited by: Das_SAP on Jun 23, 2009 7:59 AM

Hi,
SmartForms does not offer the option to set some characteristics at runtime. You must work with conditions in your form.
First find out how many records you have in your table
DESCRIBE TABLE mytable RECORDS sy-tfill.
You create 2 texts nodes with the text to be output and assign the font and font size to them. Obviouly, one node will have a big font size and the other one a normal font size but both contain the same information and same variables.
You can now work with an alternative. If the condition (there are many records for a secondpage) is true, assign text node with normal font size to option TRUE and the other text node to FALSE.
Optionally, every text node has folder CONDITIONS, where you can say
SY-TFILL > 10 lines <-- for text node with normal font size
SY-TFILL <= 10 lines <-- for text node with big font size

How to set default size for .chm window?

I know there is an answer at grainge.org, but it seems to be
referring only to a .chm using skins, which I am not.
Anybody know how to make the default size of the .chm larger?
thanks, Leisa

Lacona,
The default window size is set in your windows properties
dialog in RoboHelp. It can also be set manually in the .hhp file
before you compile. If you open the .hhp file in a text editor,
such as Notepad, you will see a [WINDOWS] section and for each
window defined there will be a series of numbers. One of these is a
vector [in square brackets] that defines the original position.
These are absolute screen pixels.
In older versions of RoboHelp, one of which I use, there was
a limit to the size of the window RH would allow but when I changed
the .hhp, RoboHelp didn't try to overwrite it unless I reopened the
Windows properties dialog. I'm not sure how the latest versions
handle this but you might try editing the .hhp with Notepad and
then compiling the .chm.
John

How can I adjust the clip speed in the editing window of Premiere Elements 11?

In former versions of Premiere Elements I could change the function while pushing the corner of a clip in the editing window: it was not cutting only, but I could also use it to adjust the speed of a clip (clicked the clock icon, after that the speed of a clip was adjusted perfectly).
But in Premiere Elements 11 this funktion seems to have gone: Now the timeline in the editing window seems to have the cutting function only!
Yes, I still can use the function "prolong time" (or whatever it is called in English, I use the German version), but in this I just can guess what percentage would fit and it's a very hard "try & error" part to get it right. In the former version the speed was adjusted "automatically" to fit the duration the clip needs – that was way more comfortable.
So, is this function really gone? I couldn't emagine why! Or how is this done now?
Couldn't find any post or video, explaning how to do that now.
No: The new "time zone" feature is not the same: it's not adjusting the needed speed rate automatically.
And by the way: There is a bug in that fuction: When I once added a new time zone, I can't remove it – clicking "set back" (or reset) doesn't do anything, the time zone stays where it is and is not deleted at all! I'm using a Windows 7 Ultimate system (64 bit) ...
I really would appreceate if someone could tell me how to adjust the clip speed perfectly to the needed duration of a clip!
Thanks in advance!

SG
An interesting point that you point out
"However, the drag-to-size method of adjusting Time Stretch has indeed been removed from version 11."
I am assuming that you are referring to an earlier version of Premiere Elements, having a Time Stretch icon (clock icon) above the Timeline to select, and then perhaps, with the mouse cursor, dragging on the end of the video clip to increase its duration. The keyboard shortcut to select the "clock icon" in thar instance is X. If you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Windows/Timeline Window/, you will mysteriously find "Time Stretch Tool" command with a keyboard shortcut X. And, if you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Applications/Time Stretch, you will find "Time Stretch" with a keyboard shortcut Ctrl+R. Bottom line: I have not gotten the keyboard shortcut X to work in Premiere Elements 11 in this regard, but the Ctrl+R does to bring up the Time Stretch dialog to do the job.
In accord with this business of what is and what isn't...the good old Razor Tool. That disappeared from sight a long time ago. Yet users were able to use that in later versions using the keyboard shortcut C. Now for me that "C" does not work to change the mouse cursor to a razor for clip splitting at the Timeline level in Premiere Elements 11 in spite of the fact that Edit Menu/Keyboard Customization/Windows/Timeline Window continues to show Razor Tool command with keyboard shortcut C.
On the good news side of things, if one trims a clip in the Preview Window, one is still able to drag that trimmed clip to the Timeline (Expert view) and drag it out on either of its edges with the mouse cursor to recover the whole clip. And, the mouse cursor is still going to be that red ] with a double edged black horizontal arrow going through it.
ATR

Find Backup Size And Backup Window

Hi Guys,
Can any one give script to find backup size and backup window (total time taken to conduct backup).
I am using Oracle 10gR2 on sun solaris 5.8
Backup-RMAN Full backup every day.
Regards

Hi,
backup size
what do you mean by backup size .. ??
User show all to list out the configuration details;
Thanks
Pavan Kumar N
Message was edited by:
Pavan Kumar

When I access the address book, how can I copy an address without having to open the person's info in the edit window?

When I find a person's address in the address book and highlight their name in one pane, in the lower pane their info shows up. Unfortunately, highlighting the information I want is disabled. So, I open their info in the edit window, and then click on the appropriate tab.
Getting a single piece of information is not so inconvenient, but when you're putting together lists it is rather onerous to do it that way.
Being able to highlight and copy off the address book panes would be cool. Thanks

In an earlier communication, I had said that this was possible, at least with TB on Windows, but I realize now that it's only possible when a certain add-on is enabled: [https://freeshell.de//~kaosmos/morecols-en.html MoreFunctionsForAddressBook]
http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html
Install the add-on, and see if you can now highlight info in the Contact Pane by dragging the cursor. Ctrl-C (or the Mac equivalent) to copy the highlighted text to the clipboard.
You may notice that right-clicking an address in the Contact Pane now shows a Copy command, but a bug in the add-on prevents this option from being active.

Open Dialog Box: full file name is not displayed in edit window under Windows 7

Only the last 16 characters of a file name are displayed in the edit window of a Common dialog box under Windows 7. What is the fix to this problem? I am coding in C/C++ and my compiler is Visual Studio 2005.

Hi warengharding624,
Based on your description, your issue is related about C/C++, since this forum is discussing about Windows Forms Controls, and I will move this thread to C++ forum.
In addition,Could you share us what the type of your project is?
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

HT2500 The message section of my Mail is very tiny to read as I type my messages. How do I enlarge the viewing size of my window?

The message section of my Mail is very tiny to read as I type my messages. How do I enlarge the viewing size of my window?
I am referring to outgoing new messages that I am typing.

Can you drag the bottom right corner? You can in Snow Leopard, and I imagine you can in Lion.

How do I change the size of a windows partition on my MacBook?

How do I change the size of a windows partition on my MacBook?

CampTune $19 from Paragon-Software is your best bet.
http://www.paragon-software.com/mac/

View in edit window not getting updatet properly

Hello
I have some problems with the view in the edit window not getting updatet correctly. I noticed this in spectral view. For example, when I zoom in very much, so I only see about 3 seconds of audio and then select one second of audio and do a time stretch, so it will be two seconds of length, the windows does not update properly.
Normally the audio behind the strechted selection should move backwards, but often the strechted portion just sort of overlaps it and it doesn't move. When I zoom out and then back in, it seems to be ok.
I also have had very weird behavior when trying to remove clicks, with the view also getting pretty messed up.
Does anyone have similar problems with the view not getting updated properly?
I am running german windows xp, audition is installed in english. I first thought that installing it in english instead of german solves the problems, but unfortunately it didn't.
Greetings

Hello again
I made a movie of this behavior:
https://share.ols.inode.at/4NNYXR4HT2CJI5IHY273R9NRHRW9OLGR95Q7VTOP
It shouldn't look like that, right?
Greetings

When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform.

Can't Open All Photos in Edit Window?

Today I've finished editing and putting together a "Slideshow" for a professional project. Then, when I opened another "Album" and tried to simply edit a photo, the photos from that album and my other albums (except for the album with the photos of the Slideshow) wouldn't open in the editing window.
Help? Please.

I have used Safari, Firefox and IE (latest version of each). I think (however) that I figured out what the bug is. I copied an address out of the address line in my browser and pasted it onto a web page. I then set it up as a hyperlink and clicked the "Open link in new window" box. However, this does not work.
I had to type the name of the site I was linking to, then link the word to the site and everything works fine.
Strange but that is how it worked out.

I was playing around with the size of my window and now I can't get it back to the standard size, any suggestions?

I was playing aaroound with the size of my window and now I can't get it back to standard size. Any suggestions?

If you're using Lion, you can resize by dragging from any corner, in Leopard and lower it can only be resized from the bottom right hand corner.

Size of edit window

Similar Messages

Maybe you are looking for