Size of RAM in Win 7 64 Bit affecting performance in CS4

Does anyone know how the size of RAM will assist  CS4 performance - particularly for H264 file encoding?
I am running an i7-930 processor and 6GB of XMS3 Corsair RAM in a ASUS P6T motherboard - on Win 7 64 Bit
Would increasing RAM to a full 12GB have any significant effect - or would this be hardly noticeable?
Finally - for anyone that has upgraded to CS5 what are the practical benefits - any performance improvements noticeable?
In particular I find Encore CS4 slow.
Rgds

I kinda think that sometimes with ram issues you have to consider the front side bus speed too...and the cpu speed of course..but the FSB and specs of the ram to match more or less the most you can get out of the FSB I think has a big influence on your performance.
ps...think of the FSB as a sort of pipe that you can shove stuff through just so fast...and it's linked to ALL the stuff going on between the cpu, ram, gpu ( if used ) and so on...sooo, it's sometimes the thing that determines the overall performance in terms of speed

Similar Messages

  • Can not operate Premiere Elements 9.0 on Win 7 64 - bit......Is there any way to make it work?

    Hello All,
    I hope this helps in my quest to operate Prem ELements 9.0 on my machine, but I have the need to get it to work and I have tried everything there is to make it happen. I know I am not doing something. Is there anyone out there that can help me out? 
    To begin, I have a Dell Precision, Quad, 10GB of RAM, running Win 7 64-bit.....I can load the software, but once I try to launch, it opens with the interface appearing, but I can operate any menu function whatsoever. Nothing. I can't set a project location let alone open an image in the organizer. I have tried to run as administrator and set up compatibility mode to Win 7, but I cant operate it at all. I just look at the interface.
    Any help would be gretly appreciated.
    Thanks!
    -Joe

    It runs perfectly on my Windows 7 64-bit, Joey.
    Have you got the latest version of Quicktime, from Apple.com, per the system requirements?
    Have you manually gone to Windows Update to ensure you have even the non-critical operating system updates?
    Have you run a program like Advanced System Care  (free from http://www.iobit.com/advancedsystemcareper.html ) to clear off the temp files and tune your registry? Even if your computer is brand new, it can be littered with temp and junk files.
    If none of that works, you may have  program conflict. Are you running a program like Norton that may be choking this installation?

  • Can CS4 be installed in Win 7 64 bit

    I will change my PC to Win 7 64 bit. Can CS4 be installed in Win 7 64 bit ?

    Hi,
    Photoshop cs4 should work fine on windows 7

  • I, work on dell laptop latitudes version 7, win 7 64 bit, ssd disk, 16 gb ram. i receive the error 12 This device cannot find enough free resources that it can use. please help

    I, work on dell laptop latitudes version 7, win 7 64 bit, ssd disk, 16 gb ram.
    i receive the error 12 This device cannot find enough free resources that it can use. please help

    1. You have placed problem in wrong forum, or use different Windows operating system
    2. Double check your resources, namely in Disk manager. What is free space on HDD?
    Regards
    Milos

  • Premiere Elements 10 Bad/No performance on Win 8 64-bit Core i5-4440 16gig ram and GeForce GTX-650

    Since just over a year i'm the owner of Premiere Elements 10, however it has never pleased me due to bad and inconsistant performance. Just putting video's one after another without any transitions works so-so a few frames per second (which is rediculus). But when i start doing things like motion keyframes, i have no preview at all just a bit of choppy audio. First i thought it was my laptop (a win 7 64-bit core i7 3rd gen, with geforce 610m and 8gig of ram) not bad but i thought well it is a laptop so it might be a bit slower, i'll have to deal with it. However since a few months i own a new PC (specs above), and experience the very same issue. No performance! Every time i think about editing a video i start the program and within a few minutes i get so angry with it that i close it and leave the video's be.
    Pre-Rendering the workspace also has no effect at all. I have no red bar above the timeline (sometimes even green).
    And worst of all it keeps messing up the timing of the video while editing. If you change a clip in the timeline all clips following (the motion edits) are destroyed. Which is only visible after a few hours of rendering, since live preview is only audio.
    What in the world can be done to fix this problem. As you probably can read i'm pretty annoyed.
    The free video editing software that comes with the gopro moves rotates and scales smoothly in live playback, so it is not impossible on the machine. (too bad the functionality of this program is so limited, else i could finally throw Premiere Elements away!).
    Is there anybody who can help me in my despair?

    nVidia Driver Rollback PreElements-10 http://forums.adobe.com/thread/1317675 may help

  • Lightroom uses PC resources inadequately (Win 7 64 bit, core i7 CPU)

    Generating standard and full sized previews for a sizeable catalogue can take hours. However, I have noticed that during the procedure the CPU utilization rarely goes above 25% (Win 7 64 bit, Core i7 960 CPU, 3.2 Ghz, 8 virtual cores), and Disk Utilization sits around 15-20% highest active time (in Win 7 Resource Monitor). So what prevents LR from speeding up? Apparently nothing but the intrinsic inefficient coding. If my observations are correct, this is a bug and needs to be addressed. Can anybody confirm?

    We have about the same rig:
    Win 7/64 Pro, Service Pack 1.
    Intel Core i7 980X at 3.33 GHz.
    ASUS Rampage 3 Extreme Board.
    Corsair Dominator 12GB, PC12800, DDR3, 1600MHz memory.
    OCZ 240GB RevoDrive X2 PCI-Express x4 SSD Raid 0, boot drive.
    WD VelociRaptor 300GB SATA-3 data drive.
    OCZ 120GB Agility 2 SSD Win cache and Lr raw cache drive.
    EVGA 768-P3-1362-TR GeForce GTX 460 Dual DVI graphics cards.
    HP LP3065, TFT, wide gamut, 2560 x 1600, 30”, main and second monitors.
    This has been used since January and Lr is fast, full size previews take less the 1/2 second each to complete, and exporting 4200 JPEG images is completed in 14 minutes.  Library to Develop switch time is a bit slow, about 2 seconds, the first time, instant thereafter for the entire session.  The spot removal tool does on occasion slow for a few seconds, but recovers completely, again for the session.  Everything else has no lag time.
    The 2560 x 1600 monitors were initially a problem, slowing everything down,  when they were configered properly, everything performed at full speed, all 12 virtual cores are now often over 80%.
    Our Win7/64 performance rating is as follows:
    Processor               7.8
    Memory                   7.8
    Graphics                 7.6
    Primary Hard Disk 7.9
    The above excellent scores were not affected by the initial problem of monitor configeration.
    If I were you, a check for the latest graphics card drivers and a check their proper configuration would be the first step.  A minimum of 8GB of RAM is recommended.  A utility check of all memory and disk I/Os is also a good idea.
    Since you did not mention any details of your setup, the above are just general suggestions.
    If Adobe's code was your culprit, this community would be the first to know, and few of us would be satisified.  Obvioulsy that is not the case.
    Good luck

  • SAP MMC  disk + work Stop(Ecc6( Adap+jav),win 2003 -32 bit , oracle-10.2)

    Hi Friends,
    I hope somebody can help.
    I have an Ides Ecc6(java+adap) installation on Oracle 10..*.os win 2003 32 bit
    Then I try to start the System in mmc the dispatcher is stopping (first yeloow then grey) and no error  messages
    when is see sys log in SAP MMC
    erro: SAP-Basis System: Initialization           DB-Connect Failed, Return Code  000256
    when i try R3trans-d
    Log:
    C:\Documents and Settings\accadm>r3trans -d
    This is r3trans version 6.14 (release 700 - 15.06.07 - 15:50:00)
    unicode enabled version
    2EETW000 sap_dext called with msgnr "2":
    2EETW000 -
    db call info -
    2EETW000 function:   db_ntab
    2EETW000 fcode:      NT_RDTDESCR
    2EETW000 tabname:    TADIR
    2EETW000 len (char): 5
    2EETW000 key:        TADIR
    2EETW000 retcode:    2
    r3trans finished (0012)
    Dev_wo.lo file
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Thu Apr 16 14:07:43 2009
    B  create_con (con_name=R/3)
    B  Loading DB library 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' ...
    B  Library 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' loaded
    B  Version of 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
    B  New connection 0 created
    M sysno      00
    M sid        ACC
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    111
    M intno      20050900
    M make:      multithreaded, Unicode, optimized
    M pid        3724
    M
    M  kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3724) [dpxxdisp.c   1301]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M 
    M Thu Apr 16 14:07:44 2009
    M  DpShMCreate: sizeof(wp_adm)          18672     (1436)
    M  DpShMCreate: sizeof(tm_adm)          4232256     (21056)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    M  DpShMCreate: sizeof(comm_adm)          528064     (1048)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (96)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1536)
    M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 06810040, size: 4892312)
    M  DpShMCreate: allocated sys_adm at 06810040
    M  DpShMCreate: allocated wp_adm at 06812090
    M  DpShMCreate: allocated tm_adm_list at 06816980
    M  DpShMCreate: allocated tm_adm at 068169B0
    M  DpShMCreate: allocated wp_ca_adm at 06C1FDF0
    M  DpShMCreate: allocated appc_ca_adm at 06C25BB0
    M  DpShMCreate: allocated comm_adm at 06C27AF0
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 06CA89B0
    M  DpShMCreate: allocated gw_adm at 06CA89F0
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 06CA8A20
    M  DpShMCreate: allocated wall_adm at 06CA8A28
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host oiam
    M 
    M Thu Apr 16 14:07:46 2009
    M  calling db_connect ...
    C  Prepending D:\usr\sap\ACC\DVEBMGS00\exe to Path.
    C  Oracle Client Version: '10.2.0.1.0'
    C  Client NLS settings: AMERICAN_AMERICA.UTF8
    C  Logon as OPS$-user to get SAPSR3's password
    C  Connecting as /@ACC on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1   06DF1478   06DF6A14   06DF629C
    C  Attaching to DB Server ACC (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4)
    C  Starting user session (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4,usrhp=06E53768)
    C  Now '/@ACC' is connected (con_hdl 0, nls_hdl 0).
    C  Got SAPSR3's password from OPS$-user
    C  Disconnecting from connection 0 ...
    C  Closing user session (con_hdl=0,svchp=06DF61E8,usrhp=06E53768)
    C  Now I'm disconnected from ORACLE
    C  Connecting as SAPSR3/<pwd>@ACC on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1   06DF1478   06DF6A14   06DF629C
    C  Starting user session (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4,usrhp=06E53768)
    C  Now 'SAPSR3/<pwd>@ACC' is connected (con_hdl 0, nls_hdl 0).
    C  Database NLS settings: AMERICAN_AMERICA.UTF8
    C  DB instance ACC is running on OIAM with ORACLE version 10.2.0.1.0 since APR 16, 2009, 14:07:26
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20090416 140746 OIAM           
    C  OCI-call failed with -1=OCI_ERROR
    C     SQL error 376: 'ORA-00376: file 25 cannot be read at this time
    C  ORA-01110: data file 25: 'D:\ORACLE\ACC\SAPDATA1\SR3_22\SR3.DATA22''
    C  *** ERROR => Error 376 in stmt_fetch() from oci_execute_stmt(), orpc=0
    [dbsloci.c    12714]
    C  *** ERROR => ORA-376 occurred when executing SQL stmt (parse error offset=0)
    [dbsloci.c    12733]
    C  sc_p=06D44E98,no=0,idc_p=00000000,con=0,act=1,slen=26,smax=256,#vars=0,stmt=06E1C138,table=SVERS                        
    C  SELECT VERSION FROM SVERS ;
    C  sc_p=06D44E98,no=0,idc_p=00000000,con=0,act=1,slen=26,smax=256,#vars=0,stmt=06E1C138,table=SVERS                        
    C  prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=06E0FC68
    C  IN : cols=0,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
    C       lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
    C  OUT: cols=1,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rsize=144,vmax=32,bound=1,iobuf_p=003F2DC8,vda_p=06E1C3A8
    C       lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
    C  SELECT VERSION FROM SVERS ;
    B  ***LOG BZA=> table SVERS      does not exist on database            [dblink#3 @ 1299] [dblink  1299 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c   1426]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10283]
    M 
    M  Info for wp 0
    M 
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    req.vm = no VM
    M    attachedVm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server oiam_ACC_00 on host oiam (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Thu Apr 16 14:07:46 2009
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10486
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 3724) [dpnttool.c   327]
    thanks for support
    keshava

    Hi Rohit
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      00
    sid        ACC
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    111
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        3452
    Fri Apr 17 14:17:27 2009
    kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 3452) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 111 successfully loaded
         shared lib "dw_xtc.dll" version 111 successfully loaded
         shared lib "dw_stl.dll" version 111 successfully loaded
         shared lib "dw_gui.dll" version 111 successfully loaded
         shared lib "dw_mdm.dll" version 111 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Fri Apr 17 14:17:32 2009
    WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0225.qqq.nxst) took 5 seconds
    Fri Apr 17 14:17:36 2009
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5361]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >oiam_ACC_00                             <
    DpShMCreate: sizeof(wp_adm)          18672     (1436)
    DpShMCreate: sizeof(tm_adm)          4232256     (21056)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1536)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06810040, size: 4892312)
    DpShMCreate: allocated sys_adm at 06810040
    DpShMCreate: allocated wp_adm at 06812090
    DpShMCreate: allocated tm_adm_list at 06816980
    DpShMCreate: allocated tm_adm at 068169B0
    DpShMCreate: allocated wp_ca_adm at 06C1FDF0
    DpShMCreate: allocated appc_ca_adm at 06C25BB0
    DpShMCreate: allocated comm_adm at 06C27AF0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 06CA89B0
    DpShMCreate: allocated gw_adm at 06CA89F0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 06CA8A20
    DpShMCreate: allocated wall_adm at 06CA8A28
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    Fri Apr 17 14:17:37 2009
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 511 blocks reserved for free list.
    ES initialized.
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 3652
      argv[0] = D:\usr\sap\ACC\DVEBMGS00\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\ACC\DVEBMGS00\exe\jcontrol.EXE
      argv[2] = pf=D:\usr\sap\ACC\SYS\profile\ACC_DVEBMGS00_oiam
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=1045
      argv[5] = -DSAPSYSTEM=00
      argv[6] = -DSAPSYSTEMNAME=ACC
      argv[7] = -DSAPMYNAME=oiam_ACC_00
      argv[8] = -DSAPPROFILE=D:\usr\sap\ACC\SYS\profile\ACC_DVEBMGS00_oiam
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
    ***LOG Q0K=> DpMsAttach, mscon ( oiam) [dpxxdisp.c   11753]
    DpStartStopMsg: send start message (myname is >oiam_ACC_00                             <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 111
    Release check o.K.
    Fri Apr 17 14:17:38 2009
    DpJ2eeLogin: j2ee state = CONNECTED
    Fri Apr 17 14:18:25 2009
    MBUF state ACTIVE
    DpModState: change server state from STARTING to ACTIVE
    Fri Apr 17 14:19:53 2009
    J2EE server info
      start = TRUE
      state = ACTIVE
      pid = 3652
      http = 50000
      https = 50001
      load balance = 1
      start_lazy = 0
      start_control = SAP J2EE startup framework

  • Audigy 4 Pro microphone problems in Win 7 64-bit

    Hi there,
    Since I put my Audigy 4 Pro card into my newer PC with Win 7 64-bit the microphone only seems to work when it wants to, or works but sounds messed up.
    I've waited a while before posting about this because I thought the newer drivers would sort out the problem, but it remains the same.
    The card/microphone works without a problem if I put it in a PC with Win XP.
    Sometimes the microphone will not pick up any sound at all. Other times it will work, but only for? game, say Heroes of Newerth. Then in Windows using teamspeak, people describe the sound like I'm talking through a fan. Tried using the in-game VOIP but I get the same result.
    After a restart or just some random day, people in Heroes of Newerth would discribe the VOIP from my side as if I was talking under water(or through a fan), but then it would work fine for teamspeak or Bad Company 2 or any other game. I used these 2 games as an example since its what I'm playing mostly at the moment.
    There doesnt seem to be any consistancy with the problem.
    I have recently removed the sound card from my PC and now forced to use the onboard sound that reminds me of the sound of a clockradio.
    My PC specs are:
    Asus Rampage Formula Motherboard
    Intel Core 2 Duo 3.0GHz E8400
    8GB RAM
    4 x WD Raptor HDD Stripe RAID
    ATi Radeon 4870 52MB
    Sound Blaster Audigy 4 Pro?(model number shown?is SB0290)
    Using?a Sennheiser PC350 Headset.
    What I have tried my side so far:
    Tried latest and older drivers for Win 7 64-bit
    Reinstalled Windows 7 several times with different drivers.
    Tried disabling all devices except for line/mic
    Tried other input devices.
    Tried with different audio and sound codecs, tried without any.
    Might have been or 2 other things I tried I cannot think of now.
    Is there anyone that experienced similar problems and got it fixed? Any help would be appreciated.

    Hi Bill,
    Can you be more specific about which steps were not recorded?
    There some things that will not be recorded. The release notes list some known issues.
    Known Issues:
    Tutorial Builder can only capture actions in Photoshop that are recorded by the ScriptListener plug-in.  While this includes most of Photoshop's functionality, some features/tools are not recorded.  In particular, brushing actions are not captured.  We hope to address this in future releases of Tutorial Builder.
    Some of the the actions that Tutorial Builder captures are not yet instrumented to produce detailed text instructions in the final tutorial.  For such actions, the generated tutorial will include a step that says "The (action name) is not yet supported by Tutorial Builder," and the tutorial author will have to edit the HTML to provide more descriptive text.  Note that the "Show me in Photoshop" link is still generated for such actions.
    Some Photoshop actions allow the user to specify a set of parameters in multiple ways, but Tutorial Builder cannot detect how the user specified those settings during the recorded demonstration.  Thus, the text in the generated tutorial may not describe exactly what was demonstrated.  For example, in the Image > Adjustments > Levels tool dialog box, you can update the parameters using three different eye droppers.  Since Tutorial Builder does not know which (if any) of these eye droppers were used, the text for a Levels adjustment does not describe exactly how the settings are specified.  Again, the tutorial author can simply edit the HTML to provide a more accurate description.
    Thanks!
    Mira

  • Can't print A3 from autocad 2013 with hp officejet 7610 in win 7 32 bit

    I can't print in A3 paper from Autocad 2013 with hp officejet 7610 in win 7 32 bit OS.Printing result is always A4 ussing this software.Other software have no problem printing in A3.An expert tried for three hours to solve the problem but has no luck.I have no problem print in A3 paper in win 8.1 64 bit system with the same software and printer.I think this is a problem of 32 bit driver of hp officejet 7610.Please help me to solve this serious problem.

    We're experiencing a similar problem with cad 13 and win 8.1 with 7610 e-all in one printer. always plots a4  or letter size in the middle of the  A3 paper.  We need urgent help please!!!ı ve tried to delete and re install the printer driver and no response!! ı hva another computer with win 8.1 and cad 13 installed.But we have no problem in this machine ?? I can not understand where is  the exact problem? Isn't there any professional to help us ?

  • How to install iTunes in win 7 32 bit

    After clicking on itunessetup.exe a error in ms dos window comes that is (inactive itunessetup.exe).   Program too big to fit in memory . Please help to solve this problem. My pc is win 7( 32 bit) ram 1.00GB , 1.80ghz processor

    Maybe the file which you've got might be corrupted somehow.
    Make sure you got atleast 2 GB of disk space (Of course on the drive where you have the OS installed) to install iTunes.
    I'd consider you to download a fresh copy of latest iTunes from this link : http://www.apple.com/itunes/download/
    After that make sure you right click on that downloaded file and select "Run as administrator" and install it!

  • Firefox on Win 7 64 bit is a big memory hogger; on Win 8.1 32 bit, it's not

    As above; I have several PCs, on two of which I use FF regularly. One PC has Win 7 64-bit as OS while the other has Win 8.1 32-bit as OS.
    I noticed that Firefox on Win 7 64-bit is a big memory hogger, sometimes eating up more than 2GB of RAM and obviously getting into an overflow of some sort after prolonged use. It essentially has some problem regarding memory or chache management, as closing tabs does not lower RAM consumption. It is not possible to leave FF open for days without experiencing this error. In Task Manager, I noticed that when the overflow occurs, FF keeps increasing its memory consumption.
    On Win 8.1 32-bit, the above problem does not exist. Closing tabs lowers memory consumption, an overflow does not occur, and leaving the window open for days does not affect performance.
    Can anyone help?

    Memory leaks are almost always caused by plugins or add-ons. These leaks can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from [https://www.mozilla.org mozilla.org] (or choose the download for your operating system and language from [https://www.mozilla.org/firefox/all/ this page]) and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (or open the Firefox menu [[Image:New Fx Menu]] and click the close button [[Image:Close 29]]).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
    <b>WARNING:</b> Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. <!-- Starting in Firefox 31, the Firefox uninstaller no longer lets you remove user profile data.Ref: Bug 432017 and https://support.mozilla.org/kb/uninstall-firefox-from-your-computer/discuss/5279 [Fx31] Windows uninstaller will no longer offer the option to remove personal data -->
    Please report back to say if this helped you!
    Thank you.

  • ITunes 10.0.4.4 is stuttering at most HD videos (Win 8 64 bit). VLC and WMP works fine.

    Hi,
    i have a problem while i'm trying to setup my iTunes on Windows. iTunes 10.0.4.4 is stuttering at the most of my HD videos (Win 8 64 bit).  On VLC and WMP all Videos are playing fine. My 3 years old Macbook PRO with much less computing power plays all my videos smooth. Unfortunately since i have a lot of iTunes stuff and iDevices i have and i wnat to use iTunes also under Windows 8 (64bit). The impossibility to play my movies smooth annoys me
    Hope someone can help me Thanks!
    My PC-Config:
    Win 8 PRO with Windows Media Center
    iTunes 10.0.4.4
    CPU: i7 4400 3,3 Ghz Quad
    RAM: 16 GB
    SATA: 256 GB SDD Samsung
    GraphicsCard: NVIDIA Geforce GTX 770 - 4GB

    Hi TischKaskade,
    If you are having issues with HD video playback in iTunes on your Windows machine, you may find the following article helpful:
    Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    Regards,
    - Brenden

  • Office 2010 Ribbon issues w/ Adobe 9.4.0 & Win 7 64-bit

    I noticed that Adobe has issues with getting the ribbon to show in Office 2010. I also saw that a footnote stated that Adobe is suppose to be working on this, but have they been? I am about ready to update my PCs to Win 7 soon and would like to know if anyone has heard if this will be fixed soon or if someone has a work around.
    Basically, I am running Win 7 PRO 64-bit with Adobe Acrobat 9.4.0 PRO and Office 2010 32-bit. There is supposely a issue with the PDF Convert ribbon not showing and its 100% true.
    For those of you suggesting I go back to Win 7 32-bit, can't I need more then 3.5 GB of RAM on my machine and/or going to Office 2010 64-bit, can't either, have older Databases that cannot be accessed in 64-bit. So, those work arounds a null. I have also tried followin the steps that Adobe has suggested, like verifiy its there, its not disabled, repairing Adobe and re-installing Adobe, but nothing worked. Oh also tried registering the DLL.
    Any thoughts or other work around totry??
    Thanks
    Derrick

    Bernd replied that "Acrobat X" will work... that means Acrobat 10
    Of course we mere users have no idea WHEN Acrobat 10 will be released
    Read here for the announcement http://forums.adobe.com/thread/739836?tstart=0

  • Installing CS5 trial, get error 1402; I ran the setup as administrator; Win 7, 64-bit, home computer

    I am trying to install CS5 Master Collection (trial). I receive the Exit Code 7, and the error 1402 - Could not open key. I have followed all the suggestions provided by Adobe Support, to no avail. I have run the setup as administrator with full rights. I am installing on a desktop computer, Win 7 64-bit, AMD 64 processor, 6 gigs of RAM, 274 gigs free on a SATA HD. Please help, I am tearing my hair out. I started the day with a full head of hair and am now bald.

    You may follow the suggestions mentioned in the below article.
    http://helpx.adobe.com/creative-suite/kb/error-1401-1402-1404-or.html
    In case you still get the same issue, give us the install.log file as already mentioned by Manish and Mylenium.

  • CUVA with Win 7 (32 Bit and 64 Bit) OS

    Hi All,
    Our users are facing issues with CUVA 2.1.2.0 [ CDP 2.1(0.6) ] with Windows 7 32 Bit and 64 Bit.
    On Windows 7 the CDP Driver and version is visible but not on Windows 7 64 Bit.
    On both the operating systems, users are not able to access the CUVA video. The status of the link between IP Phone and video is showing as disconnected.
    I know of a old document on Cisco website which says its not compatible...Any alternatives?? updates??
    Thanks in advance.
    Regards,
    Ifthiquar

    FYI - I have installed Win 7 64-bit on a 3 year old dual core dell inspiron 6400 with 2GB of ram and it is running beautifully.  So far, I have not seen any issues with 2GB of RAM.  Boot up really fast.  browsing seems faster, MS Office works great.
    My new T400s will be next - just a bit nervous as i want to make sure that all the necessary drivers are available.

Maybe you are looking for