Size of the export file

Hi Guys,
solaris 9 oracle 9i
How can one tell the size of the export file.
Thank you all.

You mean what size of export file will be after your database export?
It depends on your database's size

Similar Messages

Expanding the size of the export file

Hi everyone. I notice that when i export jpg files they seem to grow in size. For example in the inspector in Aperture, the file size says 2.58mb. when i export it as a jpeg-original size it comes out as 7 mb.
File\Export\Version\Export Preset: JPEG - Original Size
why is this happening? How can i export edited photos (jpg files) without expanding file size?
Many Thanx in advance
Mac OSX 10.9.2 (iMac)
Aperture 3.5.1

why is this happening? How can i export edited photos (jpg files) without expanding file size?
To elaborate on Ernie Stamper's advice:
Check the settings for the "JPEG Original Size" export preset. When you export a JPEG, set the export preset to "edit", and inspect the settings for the preset in the panel.
Is it the "Size to" parameter still set to "Original Size" or to a different value?
Is the Image quality slider set to a maximum value? Try to lower this value, if your image is exported with a larger file size than the original.

In iPhoto how do I stop files from auto resizing as they import? I don't want my files reduced to 72. The option to choose size on the export menu not suitable for up sizing, as you can't restore the quality removed?

in iPhoto how do I stop files from auto resizing as they import? I don't want my files reduced to 72. The option to choose size on the export menu not suitable for up sizing, as you can't restore the quality removed.

Short answer: They are not resizing, there is no quality lost. The dpi is only set when you decide what size you're printing at
Longer answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
For more see http://www.rideau-info.com/photos/mythdpi.html
Regards
TD

Schema Import failed :IMP-00008: unrecognized statement in the export file:

Hi ,
I was running a database schema import from a database DMP file.
I encountered the following error in the log file that was getting generated :
IMP-00008: unrecognized statement in the export file:
All the tables got copied except for one. Now what I have thought of is to import that one table again after taking an export from the prod schema.
But what about the functions,triggers,procedures ?? How do i bring all of them in the schema ?
If reimporting the schema again the only option ?
Thanks
Kk

Hello,
In this order:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1023988
Table Objects: Order of Import
Table objects are imported as they are read from the export file. The export file contains objects in the following order:
1. Type definitions
2. Table definitions
3.Table data
4.Table indexes
5. Integrity constraints, views, procedures, and triggers
6. Bitmap, function-based, and domain indexes
The order of import is as follows: new tables are created, data is imported and indexes are built, triggers are imported, integrity constraints are enabled on the new tables, and any bitmap, function-based, and/or domain indexes are built. This sequence prevents data from being rejected due to the order in which tables are imported. This sequence also prevents redundant triggers from firing twice on the same data (once when it is originally inserted and again during the import).
For example, if the emp table has a referential integrity constraint on the dept table and the emp table is imported first, all emp rows that reference departments that have not yet been imported into dept would be rejected if the constraints were enabled.
When data is imported into existing tables, however, the order of import can still produce referential integrity failures. In the situation just given, if the emp table already existed and referential integrity constraints were in force, many rows could be rejected.
A similar situation occurs when a referential integrity constraint on a table references itself. For example, if scott's manager in the emp table is drake, and drake's row has not yet been loaded, scott's row will fail, even though it would be valid at the end of the import.

Imp-00008: unrecognized statement in the export file

Hi All,
I am trying to import an export from Oracle 8.1.7 source system to Oracle 11.2 using imp . I am getting the following errors may times during the import process.
imp-00008: unrecognized statement in the export file
The character set of Source data base is WE8DEC and the character set of target data base is WE8MSWIN1252 and i get the below statement during the start of the import
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8MSWIN1252 character set (possible charset conversion)
export client uses WE8DEC character set (possible charset conversion)
export server uses WE8DEC NCHAR character set (possible ncharset conversion)
The error imp-00008: unrecognized statement in the export file is it due to the Oracle version compatibility or due to Character set compatibility issue.
I tried to create a new Database on same Oracle sever and i cant find WE8DEC in the list of character set to choose. Please help me on how to proceed.
Regards,
alen.

934571 wrote:
Hi Srini,
Data is getting loaded correctly, but i get several of these error imp-00008: unrecognized statement in the export file messages during the import process, so i am not sure what is missing.
Pl post the complete error message from the import log file.
1) Is it possible to import the dump exported form oracle 8 into oracle 11?? Do we need to take any special care during the import ??
Yes - no special requirements are needed.
2) The Oracale Database character set it WE8DEC, but when i try to create a new database in 11 , i dont find that character set , is the character set obsolete now , if so what character set is super set of WE8DEC ??
Pl post exact OS and database versions. Ideally you should be using AL32UTF8 for all new databases. WE8DEC is a deprecated characterset.
See section 4.2.1 here - http://docs.oracle.com/cd/E11882_01/install.112/e24186/install.htm#BABFDDEA
Thanks,
Alen.HTH
Srini

The export file from a calc script - naming and date/time stamp

Here is a simple calc script to export data.
2 questions:
1. Is there an easy way to add a date/time stamp on the name of the data file so that it does not overwrite the older ones every time?
2. I tried to specify the path so that it write to another server. "\\mfldappp011\E:\Exp_AW.txt". It's not working. How should I specify the path ?
Fix (@Relative("Yeartotal",0),"Actual","Working",&ActualYear);
Dataexport "file" "," "C:\Exp_AW.txt" "#MI";
EndFix;
Edited by: user9959627 on Sep 7, 2012 11:25 AM

Probably easiest to call the maxl script from a command line script, then rename the exported file to include the tme stamp and copy/move it to a location.
Cheers
John
http://john-goodwin.blogspot.com/

Good day! On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09 When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Un

Good day!
On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09
When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Unable to process the document in the module Save As. File not created"

Hi,
Was it working fine for you before?
Is it with some specific documents?
Are you able to convert the word/excel files to pdf?
Regards,
Rave

Good day!   On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09 When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Una

Good day!
On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09
When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Unable to process the document in the module Save As. File not created"

This happens with any file .
Send a file with the screen errors and system data . Also send a couple of files PDF.
Translates only txt format.
Acrobat установлен: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:43:46
Браузер по умолчанию:
Версия BIOS: _ASUS_ - 1072009
Версия ОС: 6.2.9200
Всего виртуальной памяти: 4194176 KB
Всего физической памяти: 4077252 KB
Графическая плата: Intel(R) HD Graphics 4000
    Версия: 10.18.10.3412
    Отметить: Не поддерживается
Доступная виртуальная память: 3638168 KB
Доступная физическая память: 1689940 KB
Имя пользователя: Vazgen
Имя системы: VAZGENTAICHI
Монитор:
    Название: Intel(R) HD Graphics 4000
    Разрешение: 1920 x 1080 x 60
    Бит на пиксел: 32
Название ОС: Microsoft Windows Vista
Папка Windows: C:\WINDOWS
Папка для временных файлов: C:\Users\Vazgen\AppData\Local\Temp\
Почтовая программа по умолчанию: Microsoft Outlook
    mapi32.dll
    Версия: 1.0.2536.0 (winblue_rtm.130821-1623)
Производитель ОС: Microsoft Corporation
Процессор: Intel64 Family 6 Model 58 Stepping 9 GenuineIntel ~1696 Mhz
Сведения о Windows:
   Планшетный ПК: Да
   Начальная версия: Нет
   Media Center Edition: Нет
   Медленный компьютер: Нет
Сведения о сеансе:
   Тип загрузки: Обычный
   Завершение работы: Нет
   Сеть: Доступно
   Внутри Citrix: Нет
   Внутри VMWare: Нет
   Удаленный сеанс: Нет
   Удаленное управление: Нет
   Использование JAWS: Нет
   Использование Windows-Eyes: Нет
   Использование NVDA: Нет
Сведения об Acrobat:
   Изолирование программной среды: Отключить
   Связанная программа для чтения: Нет
   Multi-Reader с поддержкой Desktop: Отключить
Сведения об отображении:
   Ширина экрана: 1920
   Высота экрана: 1080
   Число мониторов: 2
   Число кнопок мыши: 2
   Мышь с колесом прокрутки: Нет
   С маркером Windows: Нет
   Двухбайтовая кодировка: Нет
   С редактором метода ввода: Да
   В программе для чтения с экрана: Нет
Сведения об учетной записи:
   Права пользователя: Администратор
   Управление учетной записью пользователя: Ограниченное
   Целостность процесса: Не определено
   Тип профиля: Отсутствует
Установленные приложения:
   Версия Office: Office 2013 32-bit
Файл подкачки: 4194303 KB
Часовой пояс: Московское время (зима)
Язык: Русский (Россия)
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Accessibility.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:20
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Annots.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:22
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\IA32.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:18
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\PaperCapture.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:43:36
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SaveAsRTF.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:20
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SendMail.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:20
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Updater.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:22

I am exporting a Pages document to Epub and Pages is compressing my jpg images. How do I keep the original jpg size during the export to epub process?

I am exporting a Pages document to Epub and Pages is compressing my jpg images (I think to 72 dpi from original 600 dpi).
How do I keep the original jpg size during the export to epub process?

We are still trying learn how to use Pages to build ePub documents with high resolution graphics that will expand clearly when they are tapped. Very large screen shots are my example here.

How to set max-heap-size outside the jnlp file?

Due to bug_id=6631056 It may not be possible to specify max-heap-size within
the JNLP file for certain jnlp java applications.
Are there other possibilities to specify this Jvm parameter?
In the ControlPanel there is the possibility to specify Xmx for applets but not for jnlp.
I have tried to add properties like
"deployment.javaws.jre.0.args=Xmx\=128M" without success
Many thanks

Even in JNLP also you can specify the max heap size
<j2se version="1.5+" initial-heap-size="128m" max-heap-size="512m"/>
Thanks,
Suresh
[http://sureshdevi.co.in|http://sureshdevi.co.in]

How to get the size of the blob file uploaded ?

Hi ,
Is there anyway to get the size of the file i have uploaded to a blob type attribute ?
What i can see is that when we upload a file in contributor UI ,once the file is uploaded successfully and if we hover on it , it will show the filename , type and size of the uploaded file .
From where can we get that details so that we can reuse these details in our code ?
Thanks and Regards,
Praveen

A filter is a sensible solution, or you can get it in a roundabout way like this for example if you have the blobid (this is paraphrased from OpenMarket/Gator/AttributeTypes/IMAGEPICKERShowImages.jsp):
<ics:sql sql='<%="select urldata,filevalue from MungoBlobs where id=" + ics.GetVar("blobid")%>' listname="blobdata" table="MungoBlobs" />
<ics:listget listname="blobdata" fieldname="urldata" output="urldata" />
<ics:setvar name="blobpath" value='<%=ics.GetProperty("cc.urlattrpath", "gator.ini", true) + ics.GetVar("urldata")%>' />
<%
File blobFile = new File(ics.GetVar("blobpath"));
long length = blobFile.length();
%>
Phil
Message was edited by: pgleghorn

I just updated to 5.7 and the exported files are blurry. I compared the ones I exported before the change and they are fine. I have not change any settings.

I just updated to 5.7 and the exported files are blurry. I compared the ones I exported before the change and they are fine. I have not change any settings.

I don't understand your last paragraph.
"The home page also has a full bar ..." What does "full bar" mean? " ... instead of the tray it had before." What does "tray" mean?
Anyway, you might try Settings > General > Reset > Reset Home Screen Layout
I guess that cannot make things any worse.

What data is contained in the export file for a transportable tablespace?

"This operation will generate an export file, jan_sales.dmp. The export file will be small, because it contains only metadata. In this case, the export file will contain information describing the table temp_jan_sales, such as the column names, column datatype, and all other information that the target Oracle database will need in order to access the objects in ts_temp_sales."
What is the other information?

I don't have the sales dump. I was only quoting from the documentation. What i have is an export of 18 tablespaces - 9 partitioned data tablespaces and 9 partitioned index tablespaces.
What I was trying to determine was if I could still import the tablespaces if the tablespace files were from a time that was after (one week) the original export of the metadata or if there was some bit of information that was held in the metadata which would prevent this.

IMP-00008: unrecognized statement in the export file, oracle 11gr2 on redhat 5

I am using Oracle 11g R2 on Radhat 5 linux to import(imp) a dmp file with a table with blob data type. I got the following errors with binary non-ascii on the screen and failed imp at that table:
IMP-00008: unrecognized statement in the export file: (a lot of non-ascii characters followed)
How do that happen and how do we handle it?
-Henry

Hello,
IMP-00008 may due to several reasons.
The Dump may be corrupted, you may also hit a Bug and so on, ...
Is it the only error you got or do you have other error message (for instance IMP-00032) ?
Else, I don't know why you use EXP/IMP in 11.2, the Original Export/Import is not recommended. You should use DATAPUMP which is much more powerful.
Please, find enclosed a link about DATAPUMP:
http://www.oracle-base.com/articles/10g/oracle-data-pump-10g.php
Hope this help.
Best Regards,
Jean-Valentin Lubiez

Problems with captions in the exported file

I export my sequence as a quicktime file and the captions should be embedded in the export file. But the exported quicktime file doesn't show the captions. Who can help?

Exactly what version of Premiere are you running?
What type of captions? CEA-608? CEA-708? Teletext?
When the sequence is loaded in the Timeline, can you see the captions in the Program Monitor?
When you say "captions should be embedded in the export file," I assume that means that on the Captions tab in the Export Settings dialog you set Export Options to "Embed in Output File." Please confirm.
How are you checking for captions in the exported clips? What player? Have you enabled caption display in it?

Size of the export file

Similar Messages

Maybe you are looking for