Size of the SystemTray?

Hi,
I want to display a message that fades in/out (aka Outlook message) just above the SystemTray in the lower right screen corner. Is there a way to determine the height of the system tray? Using Toolkit.getScreenSize().getWidth() I can find out the x pos of my message panel, but y...?
Thanks!

GraphicsEnvironment.getLocalGraphicsEnvironment().getMaximumWindowBounds()returns a Rectangle that excludes the taskbar. I'm sure you can take it from there.
luck, db

Similar Messages

  • How do I edit the size of the page to make it 8.5/11?

    I am trying to convert Word documents to PDF forms, so I have to recreate the forms in Adobe FormsCentral. How do I format the page size?

    Hi,
    You can configure the PDF paper size via the Form Setup dialog, which you access by selecting the File > Form Setup... menu item.
    Regards,
    Brian

  • Can I edit image size in the TOC?

    Is it possible to edit the size of the image placeholder used for the TOC in CP5?
    I'd like to use it for a company logo to free up some design space and keep marketing happy, but I can't make it big enough.
    Unfortunately I don't have access to Flash so if there is an alternative way that would be great.
    Thanks
    Sam

    Hi,
    Unfortunately, it is not possible to edit the size of the image placeholder in TOC in Captivate 5. The image is scaled down to project size and displayed in the TOC.
    You could please log a Feature Request for the same under https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5.
    Thanks,
    Sushma

  • Edit next extent size of the Cluster table

    Hi Guys
    I need to change the next extent size of the a table.
    I ran se14 but i am not able to get into edit mode, because there is no button for edit mode.
    Reason: Cluster table
    Two questions:
    1. Why there is no Edit button? Is it because this table doesnot exixt at DB level.
    2. How can i change the next extent size for a Cluster table from sql prompt or from brtools if possible.
    Information:
    I am facing this issue only in DEV, QAS boxes, where as in Production its fine.
    Regards
    Ricky
    Edited by: Ricky kayshap on Dec 9, 2008 3:52 PM

    Hi,
    Cluster Tables doesn't exist in DB, Because of that you can't make changes to extents at DB level.
    if you experiencing some space issue. I woud suggest to check the underline Transparent tables and make changes to those.
    hope this helps.
    Kalyan.

  • I am in the print mode  but the dimensions I select in the size template do not show up on either the cell size or the photo,  i.e. select 4x6 template lR gives me 3.5x4 8x10 gives me 5.19x3,50 I have to use 8x10 template in order to get 3.5x5.194

    The sizes on the print template do not relate to the size I get in the cell size or on the photo. Template 8x10 gives me 3.5 x5.194 which is on the cell size can't make it any larger. 4X6 template gives me 3.5x4 which is the same as the cell size.  My printer is a new epson 3000 which is set to print 4x6 but LR does not give the 4x6 dimension to the printer just the aforementioned sizes!!!! I have tried everything to get it to print properly to no avail.   The photo system that came with the computer an iMac 27" pro 2013  with yosemite as the os.works fine with he printer!  You just cannot do much other than print with it
    Anybody have any idea what happened?  It used to work fine ____about a week and a half ago
    HELP
    len

    Hi,
    I tried the example and got some weird error messages as follows:
    ********* error messages*********
    ShowComponent.java:90: cannot resolve symbol
    symbol : method getName ()
    location: class javax.swing.UIManager.LookAndFeelInfo[]
    { String plafName = plafs.getName();
    ^
    ShowComponent.java:91: cannot resolve symbol
    symbol : method getClassName ()
    location: class javax.swing.UIManager.LookAndFeelInfo[]
    final String plafClassName = plafs.getClassName();
    ^
    ShowComponent.java:139: cannot resolve symbol
    symbol : method indexOf (char)
    location: class java.lang.String[]
    int equalsPos = args.indexOf('=');
    ^
    ShowComponent.java:143: cannot resolve symbol
    symbol : method forName (java.lang.String[])
    location: class java.lang.Class
    Class componentClass = Class.forName(args);
    ^
    ShowComponent.java:161: cannot resolve symbol
    symbol : method substring (int,int)
    location: class java.lang.String[]
    String name = args.substring(0, equalsPos); //property name
    ^
    ShowComponent.java:162: cannot resolve symbol
    symbol : method substring (int)
    location: class java.lang.String[]
    String value = args.substring(equalsPos+1); //property value
    ^
    6 errors.
    *****end of error messages*****
    I use jdk1.3 and Win2000. Can anybody tell me how to delete above error messages?
    Thanks a lot.
    Li

  • Hi, I am having trouble getting an album to download. I have tried it on both my iPhone and laptop through iTunes but neither works. I am wondering if it could be the size of the album stopping it downloading (212 Tracks) Any Ideas?

    Hi, I am having trouble getting an album to download. I have tried it on both my iPhone and laptop through iTunes but neither works. I am wondering if it could be the size of the album stopping it downloading (212 Tracks) Any Ideas?

    These alerts occur due to timeouts or conflicts trying to write a file during download.
    If you encounter this issue while while downloading something from the iTunes Store:
    Delete your iTunes Downloads folder, located in:
    Mac OS X:
  ~/Music/iTunes/iTunes Media/Downloads   Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~)  refers to your Home directory.
    After locating your iTunes Downloads folder:
    Quit iTunes.
    Delete the Downloads folder on your computer.
    Open iTunes.
    Choose Store > Check for Available Downloads.
    Enter your account name and password.
    Also review this support aticle as it might be causing due to internet connection: http://support.apple.com/kb/ts1368
    Hope this helps.

  • File size of corrected jpegs expands to half the size of the original

    Using a Canon 1Dx, I have an option of utilizing both slots and assigning different file types to each.  In one slot I shoot RAW, and on the 2nd slot I shoot a JPG backup.  Typically though I'll do all my work on the RAW file in Lightroom 5.  The unimported JPG shot on the second slot expands to approx. 51MB.  But the CR2 file, imported to Lightroom 5 and then exported as a corrected JPG, only expands to 28MB.  Am I missing something on import/export that would reduce the filesize of the corrected JPG?  I cannot find a setting that is toggled that augments import/export size.  Is this a bits per channel issue?   Similarly, I have the same issue with Bridge.  When converting a CR2 file to JPG it expands to the same 28MB filesize.  My client wants his JPG to expand closer to that 50MB number.

    dean5432 wrote:
    When the JPG file is opened, it shows as 51MB.  When the CR2 file is opened it's 28MB.  I was under the mistaken impression that the files would produce equally sized JPGs, and that somehow in the output from Lightroom it was constraining the size of the finished image.
    When you say "opened" what  'MB' reading are you reffering to? Lightroom can show the image file's Resolution (5184 x 3456), File Size (MB), and Megapixels. What does LR show for these three reading, in particular you should be interested in the image 'Resolution' value.
    When viewed in PS your Canon 1Dx raw image files should show a 'Document Size' of:
    5184 x 3456 x 3 (RGB) x 2 (16 bit data) = 107,495,424 Bytes ÷ 1,048,576 (# of Bytes in MB) = 102,515,625 Bytes = 102.5 MB
    Your full-size Camera JPEG images should be exactly 1/2 since they are 8bit images = 51.3 MB
    I can confirm these numbers with my Canon 600D, which also uses a 5184 x 3456 resolution sensor.
    You may have your camera set to shoot M-Raw (3888 x 2592) or S-Raw (2592 x 1728) with full-size JPEG (5184 x 3456).

  • TS3682 How can we get IOS7 to increase the font size of the keyboard in Messaging?

    I absolutely detest the font size of the keyboard - it is too thin, and the contrast we used to have in ios6 was perfect!   How do we complain loud enough to get Apple to give us a choice?

    here are some guides
    http://www.google.dk/search?client=opera&rls=en&q=osx+mail+font+size&sourceid=op era&ie=utf-8&oe=utf-8&channel=suggest

  • How do I change the tab sizes in the new version of Firefox?

    Hi,
    Thanks for any help in advance.
    Of course the new Firefox is messing with me...But I have one specific question...
    Facts...
    1) I own a iMac...17 inch...So I can open lots and lots of tabs at once.
    2) I just rebooted my computer back to brand new.
    3) I'm working on finding all my old stuff, but can't seem to find two specific items...
    In the previous version, and before I rebooted, I had about 40 tabs (Including Cluster Tabs) opening-up whenever I started a browse session. But now, I can't seem to control the size of the tabs, so they get less narrow as I had them?
    I've already downloaded "Vulcanize Tabs" but that's no help...I think it was a specific theme that allowed me to do this, but many of the themes don't work with this new version of Firefox.
    I suspect I'll just have to wait until the themes are updated? Or, do you have a better idea?
    Also...
    I want to get rid of the "X" on each tab and only have a close tab button on the far right of my tabs navigation bar.
    Any help?
    If so, thanks again!
    Ps...Is there a way to reverse my downloading of this newest Firefox version and go back to the previous one until this new one gets many of the bugs worked-out?

    You can also look at Tab Mix Plus.
    Tab Mix Plus: https://addons.mozilla.org/firefox/addon/1122

  • How can I change the font size on the post of WordPress?

    I have found three websites which address WordPress style sheets:
    Playing With Fonts: http://codex.wordpress.org/Playing_With_…
    Font Size and Color: http://en.support.wordpress.com/editors/…
    How to Change Font Size In Wordpress: http://www.ehow.com/how_5469172_change-f…
    Here are the instructions from the third website above:
    Things You'll Need:
    Site designed in Wordpress
    Administrator access
    Step 1
    First, to change the font size on a Wordpress site you need to log into the site as administrator. If you do not know how to reach the login page, simply add "/wp-login.php" after the "www.url.com" address. Then login using the admin sign in.
    Step 2
    Next, get to the Wordpress file editor by going to Appearance->Editor.
    Step 3
    Once in Editor, identify the Stylesheet file (style.css) and click to edit. This is usually located on the right hand side under the "Styles" heading.
    Step 4
    Once in the style.css file, you want to conduct a search for "fontsize". This parameter is used throughout the style.css file and is the parameter used to control font size. Next to "fontsize" you will see something like "16px". Simply increase or decrease the "16" to change font size. The tricky part is to figure out which "fontsize" you want to edit.
    The way to do this is to first look at the heading it is under. If it is under "comment-template", it is obviously related to either the font size of the comments themselves or perhaps the comment form or the date/time stamp of the comment.
    It may take a little trial and error to find the right "fontsize" to modify. Simply modify the one you think is correct and in a separate window, reload the page with the font you are looking to modify. If it did not change, undo the previous edit and try a different "fontsize".
    I went to the Dashboard and clicked on the “Appearance” icon on the left-hand side, and then clicked on editor. I clicked on Stylesheet (style.css), but I have not been able to find the “fontsize” that would change my post font size. As the author writes: "The tricky part is to figure out which "fontsize" you want to edit." Some of the font sizes are given as a percentage, and I don’t know if these come into question, i.e., if I should try changing one of these to see what happens.
    The end result is that I still have not been able to change my post font size, other than by using the Heading-1-through-6 option, which, I understand, is not the best way to do it.

    From John Waller: “If you're using IE8, hit F12 to launch Developer Tools which give you a point and click method of locating the relevant CSS rule on screen.”
    I have Internet Explorer 8 (IE8) so tried this method.
    This sounded like another promising possibility; however, I have not been able to change the font size in my post using this method.
    I have gone to Dashboard > Posts > Edit > then moused-over my post > clicked on "edit" and then hit F12. An enormous amount (20 pages or more) of CSS appears. I tried picking out the font size that I thought pertains to the post (under Text Area), and I have changed the font size from 13px to 24px; however, I have not been able to “save” the new setting. When I go back to it, it is back to 13px.
    As a result, I have not been able to use a trial-and-error method to establish which font size I must change in order to change the font size of my post.

  • Photosmart C410: How do I associate a custom paper size with the photo tray?

    Our Photosmart 3310 recently broke down and I purchased a C410 to replace it.  I sell a small item online that I ship in 3 5/8 x 6 1/2 envelopes.  With the 3310, I had figured out a way to print the envelopes from the photo tray.  While Word 2007 allows me to select the photo tray, the printer would not print from there until I created a custom paper size in the printer preferences dialog box.
    One of the reasons I got the C410 was for the photo tray.  It's a real pain to have to swap out the regular paper and stick in one evelope every time I want to print another envelope.  Well, unfortunately, that's what I've been doing.  I select the photo tray in Word, but the printer goes right ahead and prints from the main tray.  I had forgotten what I did to make it work on the 3310, so I experimented with that printer's drivers until I figured it out.
    My problem is that the software interface for the C410 is different than that for the 3310.  I can't figure out how to associate a custom paper size with the photo tray.  To test my theory this evening, I told Word that my envelope size was 5 x 7.  The printer didn't hesitate to take an envelope from the photo tray.  Of course the return address went into a dark void because the envelope is not 5 x 7.
    The difference between the two interfaces is that the 3310 has both printing shortcuts as well as "Print Task Quick Sets."  The C410 only has printing shortcuts.
    If anyone can help me, I'll be very grateful!  I've probably spent hours trying to get this figured out, and I have no idea what to do.

    Hi,
    Which Microsoft product (application) are you using ? Printer supports the following custom sizes:
    From ADF: Custom-sized media (ADF) between 127 to 216 mm wide and 241 to 305 mm long (5 to 8.5 inches wide and 9.5 to 12 inches long)
    From input tray: Custom-sized media between 76.2 to 216 mm wide and 101 to 762 mm long (3 to 8.5 inches wide and 4 to 30 inches long)
    You need to select right custom size from the application.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I show file size in the Finder icon view for images?

    How can I add the file size to the icon view "File Info" for images?
    I know how to get it to display the image size under View Options. In this mode it shows pixel dimensions for some images (not for svg or pdfs tho) and file size for some non-images (rar, zip, but not txt or plain text files).
    Is there some plist I can modify?

    Just found the answer in a post with this subject: 
    How Do I Change the Mailbox Font Size in the Sidebar?

  • How Can I Determine the Size of the 'My Documents' Folder for every user on a local machine using VBScript?

    Hello,
    I am at my wits end into this. Either I am doing it the wrong way or it is not possible.
    Let me explain. I need a vb script for the following scenario:
    1. The script is to run on multiple Windows 7 machines (32-Bit & 64-Bit alike).
    2. These are shared workstation i.e. different users login to these machines from time to time.
    3. The objective of this script is to traverse through each User Profile folder and get the size of the 'My Documents' folder within each User Profile folder. This information is to be written to a
    .CSV file located at C:\Temp directory on the machine.
    4. This script would be pushed to all workstations from SCCM. It would be configured to execute with
    System Rights
    I tried the script detailed at:
    http://blogs.technet.com/b/heyscriptingguy/archive/2005/03/31/how-can-i-determine-the-size-of-the-my-documents-folder.aspx 
    Const MY_DOCUMENTS = &H5&
    Set objFSO = CreateObject("Scripting.FileSystemObject")
    Set objShell = CreateObject("Shell.Application")
    Set objFolder = objShell.Namespace(MY_DOCUMENTS)
    Set objFolderItem = objFolder.Self
    strPath = objFolderItem.Path
    Set objFolder = objFSO.GetFolder(strPath)
    Wscript.Echo objFolder.Size
    The Wscript.Echo objFolder.Size command in the script at the above mentioned link returned the value as
    '0' (zero) for the current logged on user. Although the actual size was like 30 MB or so.
    I then tried the script at:
    http://www.experts-exchange.com/Programming/Languages/Visual_Basic/VB_Script/Q_27869829.html
    This script returns the correct value but only for the current logged-on user.
    Const blnShowErrors = False
    ' Set up filesystem object for usage
    Set objFSO = CreateObject("Scripting.FileSystemObject")
    Set objShell = CreateObject("WScript.Shell")
    ' Display desired folder sizes
    Wscript.Echo "MyDocuments : " & FormatSize(FindFiles(objFSO.GetFolder(objShell.SpecialFolders("MyDocuments"))))
    ' Recursively tally the size of all files under a folder
    ' Protect against folders or files that are not accessible
    Function FindFiles(objFolder)
    On Error Resume Next
    ' List files
    For Each objFile In objFolder.Files
    On Error Resume Next
    If Err.Number <> 0 Then ShowError "FindFiles:01", objFolder.Path
    On Error Resume Next
    FindFiles = FindFiles + objFile.Size
    If Err.Number <> 0 Then ShowError "FindFiles:02", objFile.Path
    Next
    If Err.Number = 0 Then
    ' Recursively drill down into subfolder
    For Each objSubFolder In objFolder.SubFolders
    On Error Resume Next
    If Err.Number <> 0 Then ShowError "FindFiles:04", objFolder.Path
    FindFiles = FindFiles + FindFiles(objSubFolder)
    If Err.Number <> 0 Then ShowError "FindFiles:05", objSubFolder.Path
    Next
    Else
    ShowError "FindFiles:03", objFolder.Path
    End If
    End Function
    ' Function to format a number into typical size scales
    Function FormatSize(iSize)
    aLabel = Array("bytes", "KB", "MB", "GB", "TB")
    For i = 0 to 4
    If iSize > 1024 Then iSize = iSize / 1024 Else Exit For End If
    Next
    FormatSize = Round(iSize, 2) & " " & aLabel(i)
    End Function
    Sub ShowError(strLocation, strMessage)
    If blnShowErrors Then
    WScript.StdErr.WriteLine "==> ERROR at [" & strLocation & "]"
    WScript.StdErr.WriteLine " Number:[" & Err.Number & "], Source:[" & Err.Source & "], Desc:[" & Err.Description & "]"
    WScript.StdErr.WriteLine " " & strMessage
    Err.Clear
    End If
    End Sub
    The only part pending, is to achieve this for the 'My Documents' folder within each User Profile folder.
    Is this possible?
    Please help.

    Here are a bunch of scripts to get folder size under all circumstances.  Take your pick.
    https://gallery.technet.microsoft.com/scriptcenter/site/search?query=get%20folder%20size&f%5B0%5D.Value=get%20folder%20size&f%5B0%5D.Type=SearchText&ac=2
    ¯\_(ツ)_/¯

  • How to manage multiple sizes of the same image?

    I recently took up LightRoom for all the good things it does. One of the things I need to do, however, is to create and manage multiple sizes of the same image needed for different purposes. I always found this cumbersome. I totally expected that the LR library would offer a solution for this but I looked and I didn't see anything. Sure you can export and resize in the process but then you're on your own. Am I missing something? Isn't there a better way? What does Adobe have in mind for best practices and how do you handle this?

    I can't speak for 99jon, but when I need multiple sizes, I export at the desired sizes, and then make use of the exported photos (upload, e-mail, whatever) and then delete the exports. Thus, there's really no need for me to keep track of the photo at this specific size, knowing that if I ever need it again -- unlikely -- I can regenerate it with the export pre-set, so I put no effort (zero!) into keeping track of photos at different sizes.
    The idea of adding it back into the catalog doesn't get me excited, and I would advise against it. I don't need this, and I don't see the benefit of keeping this particular size export for the long-term. As I said, I can always recreate it — but maybe you have such a need to keep these exports long-term and recreating it at a later point in time doesn't meet your needs? Can you explain?
    By the way, you can't resize a virtual copy, so that won't work here. The only time you can resize is on export.

  • How can I switch off the automatic window size and set the size of the window manually

    I need to open the web-page in a window of a certain size. The javascript function window.resizeTo (w, h) does not work. If I open the window using the window.open ("", "", "width: w, height: h, ..."), there is another problem.
    The hyperlinks that have to be opened in a new tab in the same window or at least in the window of the same size, will open in another tab of the first window from which I called window.open().
    I do not know what it is, bug or as intended, but the normal full-featured window with the right size I cannot get.
    In Russian:
    Мне нужно открыть страницу в окне определенных размеров.
    Из консоли Firebug с помощью javascript пробовал window.resizeTo(w,h) - не работает. Если открывать окно с помощью window.open("", "", "width:w, height:h, ..."), то возникает другая проблема: ссылки, которые должны окрываться в новой вкладке в том же окне или хотя бы в окне того же размера, открываются в другой вкладке первого окна, из которого я выполнял команду window.open(), которое неправильного размера.
    Не знаю, что это. Баг или так задумано. Но открыть нормальное полноценное окно с нужными размерами не получается никак.

    You need an extension if you want to set the window dimensions to a specific value or you need to open a pop-up window with window.open and specify the width and height.<br />
    Otherwise a new window opens with some default dimensions as saved in localstore.rdf and you can't easily adjust the dimensions via JavaScript in that case.

Maybe you are looking for