Size requirement for Speech

I'm not able to install the Speech option on my Nano because I don't have enough space. How much space do I need to free-up to install the speech software?

I don't know. But you will probably get a better response if you ask this over in the Nano area of discussions. This is the 5th generation full size iPod section.
You want this area...
http://discussions.apple.com/category.jspa?categoryID=265
Cheers,
Patrick

Similar Messages

Paging File Size requirement for Windows CE7.1 on Windows 2008R2

Hello ,
We are installing the SAP CE7.1 Java on Windows 2008 R2. The SAP installtion guide recommends paging space for SCS as 1 Times RAM + 1 GB. However some of SAP note says Paging space is now required for Java only systems. what could be the best suggested value to go with .
Regards
Makrand Gargate

Hi Makrand,
You can refer to note 1518419, where attached to it contains a PDF with examples and how to calculate the size of page files both for ABAP and Java instances.
Cheers,
Maurício

Database Size Required for SOA

I will be installing SOA Suite with OSB in Exalogic for testing. It is not for the production environment and very simple application will be used for testing. Database admin asked me what size database would be required but I did not find clear answer in the documentation anywhere. I would appreciate if some one could provide the answer.
Thanks
P.S: Oracle Database 11.2 will most likely be the preferred choice for the database.

Try and have a separate machine for the SOA Suite, e.g. server. Then use the developer machines for JDev.
It really comes down to what load you are going to put on your environment. I would recommend 4GB but I have run it fine with just 2GB. The issue of having JDev on the same machine is that JDev can very very memory hungry and can / will impact the developer experience.
cheers
James

Size requirements for Bootcamp/Windows 7 partition?

Hi,
I partitioned my 256 GB flash drive with 60 GB for Bootcamp. Then I installed Windows 7.
Windows explorer says that I have 2.83 GB of free space left on the Bootcamp partition!!!? Can that be right?
I checked Properties on all of the Bootcamp/C: drive top level folders. They add up to about 27 GB. Where's the rest of the space gone?
Thanks!

Just an additional note: Apple Bootcamp Support states that, for 64-bit Windows 7, 20 GB of hard drive space is required. I provided 60 GB. What happened to the other 35+ GB of space on that partition...?
http://support.apple.com/kb/HT1899

Tempdb- Disk size Requirement for Tempdb Database?

Working on new project that have fresh windows and SQl Server Install on physical machine.
Like to know what should be the disk size to keep for tempdb Intially? like 10Gb or 20GB? It will be on separate Drive .
Also like to know what should be ideal drive size to keep for Data and Log drive? They both will be on separate drive also.
any other configuration best practices ?
Thank you
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach A.Shah

Hi,
Size of the tempdb depends on various factors.
Bulkload operation
general query expressions
dbcc checks
indexes
LOB Variables and parameters and many more.
As others suggested,monitoring is the best way.Try the below in test environments.
Set autogrow on for tempdb.
Execute individual queries or workload trace files and monitor tempdb space use.
Execute index maintenance operations, such as rebuilding indexes and monitor tempdb space.
Use the space-use values from the previous steps to predict your total workload usage; adjust this value for projected concurrent activity, and then set the size oftempdb accordingly.
Refer the below link for optimization.
http://technet.microsoft.com/en-us/library/ms175527(v=sql.105).aspx
Best Regards, Arun http://whynotsql.blogspot.com/

What is the file size requirements for a graphical identity plate in 5.5?

Seems to have gotten smaller? My old plate is cut off

See my post in this thread: Lightroom 5.4 identity plate space

What is size of jre required for oracle on redhat 7.1

what is the file size of jre required for oracle on linux redhat .is this copy in floppy ?

what is the file size of jre required for oracle on linux redhat .is this copy in floppy ?

Periodic lot size PR not covering the requirement for the periods

Dear Experts,
I am using customized monthly lot size size key with Periodic lot size procedure and number of periods 3 months.
The MRP is creating one purchase requisitions for all the requirements for the first month only. The second and third month requirements are not included for the purchase requisition quantity. The second and third month requirements are kept opened without any PR.
The planning harizon is 100 days which is more than 3 months. There is no maximum lot size restrictions. But still why the purchase requisition quantity is not included the second and third month requirements.
Please give your valuable suggestions.
thanks and regards
Muru

Dear Experts,
I am using customized monthly lot size size key with Periodic lot size procedure and number of periods 3 months.
The MRP is creating one purchase requisitions for all the requirements for the first month only. The second and third month requirements are not included for the purchase requisition quantity. The second and third month requirements are kept opened without any PR.
The planning harizon is 100 days which is more than 3 months. There is no maximum lot size restrictions. But still why the purchase requisition quantity is not included the second and third month requirements.
Please give your valuable suggestions.
thanks and regards
Muru

HELP REQUIRED FOR GREETING CARD SIZES IN PSE10

I've wasted hours trying to find how to obtain 5" x 7" folded greeting card sizes. The default menu only offers four sizes, all for flat cards but according to the Adobe Photoshop Elements 10 "Classroom in a Book" I should be able to select a 5" x 7" folded postcard using "Shutterfly". I have visited the "Shutterfly"website but it appears to only support US/Canada residents. Any suggestions, other than moving to the USA/Canada, on to how to overcome this problem would be most welcome.

Suggest that you enhance your picture file in Elements, then save it.
Use a program such as WORD, and utilize templates which can be downloaded from http://www.avery.com.
For example, #3378 is a Half-Fold card, 5.5 x 8.5", designed for their paper stock. http://www.avery.com/avery/en_us/Search/?dimsearch=true&N=0&Ntk=All&Ntx=mode+matchall&Nty= 0&Nr=AND%28SITESCHANNELS%3AAvery.com%29&Ntt=3378&x=16&y=7
Insert the picture, add your text, and you're ready to go.

Open Purchase Orders not considered as requirement for MRP Run

Hi ,
We are facing a issue of Open Purchase orders not appeared in Stock requirements list and also it is not considered as requirement for MRP Run against reservation.
As aresult for a reservation demand of 10 units we are ending with Open POs 10 units and a additional planned order 10 units.
Material Type : ERSA
MRP Type : PD (or VB)
Lot size : EX ( HB if MRP Type is VB)
Could you please throw some light to correct our settings to MRP to consider Open POs?
Saravanan

Can you check to see if there is a re-order point set up for this materia? That could be causing the problem too.

Help define the requirements for an Oracle Spatial management tool

Hi,
We are developing a tool that, we hope, will be indispensable for all Oracle Spatial and Locator dbas/users. We've released version 1.0, but we need your help to define the requirements for the next version.
What features would you like to have in a management tool for your spatial databases?
The features we've got so far:
1. Viewing of vector data in a map + attributes
2. Loading from shapefiles
3. Exporting to shapefiles
4. Validating metadata, indexes and spatial data.
We are adding editing of vectors in the next version - basic stuff for add, update and delete.
But there must be a lot more. What do you find difficult to do in Oracle Spatial/Locator? What would you like in a tool such as this?
Any feedback either to myself or the forum is much appreciated.
cheers,
Andrew
[email protected]
PS If you like to have a look at what we have done so far, go to http://www.geometryit.com/products/spatialConsole.php

Andrew knows what I have asked for but for others to think about and to start
the ball rolling, here's what they are:
1. Ability to enter own SQL commands but with PARAMETERS for attributes
and shapes as in the following examples:
SELECT ...
FROM my_spatial_table a
WHERE a.ATTRIBUTE = :attr
AND MDSYS.SDO_RELATE(a.shape,:polygon,'mask=anyinteract') = 'TRUE'
When executed the attribute value is asked for via a input box (data type?)
and the user is asked to define the SDO_GEOMETRY for the :polgygon parameter via mouse clicks on the screen.
Similarly, this would work for INSERT, UPDATE and DELETE...
INSERT INTO my_spatial_table (shape) values(:polygon)
The data type of an attribute parameter could be determined in two ways:
a) By querying the Oracle catalog;
b) By using a "PARAMETERS" command before the query as follows
PARAMETERS name type [(size)] [, name type [(size)] ...]
The PARAMETERS declaration has these parts:
name     The name of the parameter.
type     The type of the parameter.
size     The size of the parameter in characters or bytes.
2. When executing an SQL SELECT statement I would like the tool
to suggest the HINTS that are needed to improve performance.
3. Following on from 2, I would like to Tick an option that would return the
EXPLAIN PLAN that the query optimizer used when executing my query.
4. The tool has to support ALL Oracle's spatial vector data types.
5. It would be nice to be able to work with GeoRasters. Since Spatial Console
imports/exports shapefiles why not the same for rasters. However, the problem
with supporting foreign data formats is WHERE DO YOU STOP!!!!!
6. You could allow for the styling of the Spatial Console to be stored in the MapViewer catalogs or use the MapViewer catalogs when styling an Sdo_Geometry if it exists (I note that your tool extracts the SDO_METADATA
why not the MapViewer metadata as well)?
regards
S.

High availability SQL Server requirements for Remote Desktop Services in Windows Server 2012

Good night,
Thanks for reading this question, I do not write much English.
I am implementing Remote Desktop Services in Windows Server 2012, I need to know the size of the database to create and feature on the .mdf and .ldf, I searched in different microsoft link but I have not received a response.
Kindly appreciate your cooperation and attention.

Hi Alejandro,
I am implementing Remote Desktop Services in Windows Server 2012, I need to know the size of the database to create and feature on the .mdf and .ldf
If you want to know the size requirements of .mdf abd .ldf files, since they are parts of SQL database, I suggest you refer to SQL forums below to get more professional support:
https://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlgetstarted
https://social.technet.microsoft.com/Forums/sqlserver/en-US/home
In addition, here are some articles regarding RDS deployment for you:
Remote Desktop Services Deployment Guide
https://technet.microsoft.com/en-us/library/ff710446(v=ws.10).aspx
Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style
http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Add a file size option for TIF export

I would like to have an option to set (uncompressed) file size (or alternatively size in MPix) for a TIF file and have lightroom set the pixel dimensions accordingly. The reason is that many libraries specify a file size requirement. If all your images are cropped the same then working out the dimensions is simple, but if they are all different shapes then it becomes a real pain as you have to work out the dimensions for each one.
Something somewhat similar has been mentioned for jpeg output, to allow you to specify file size and have lightroom adjust quality to achieve the filesize you want (leaving pixel dimensions fixed).
...rob

If by filesize you mean dimensions (e.g. cropped), then that is built into Lr5 - via smart collection, not library filter.
If you mean actual source file size (e.g. in bytes), that requires either:
* John Ellis' AnyFilter, or
* Jeffrey Friedl's Data Explorer.
(if there are others, I don't know about them)
I have plugins for lotsa things, but not everything .
Cheers,
Rob

Increasing Email Size Limits for some users

Hi All,
For some users (management) i needed to arrange that they are able to send bigger files then the default 10MB limit to each other.
I used this procedure to do so,
https://www.simple-talk.com/sysadmin/exchange/increasing-email-size-limits-for-your-high-profile-users-in-exchange-2010/
In a nutshell:
Set Global Transport Org. Config to 200MB
Set Transport Send and Receive connector to 200MB
Created a Distribution group adding the MT members and me (for testing)
Created a transport Rule for the 10MB limit for all users and exception for the distribution group
(Believe me, i am not happy with the 200MB size limit)
All seems to work but i have one issue that i cannot tackel or maybe it is by design.
-Managemant can also send big files to all
users who do not have this privelige, this is not someting i want, sending 100MB+ attachments to over 150 users.
Is this by design or do i mis something?
Thanks,
Ron

Hi RonGielgens,
Attachment size in exchange has to be set on
Global settings
Connectors (send and receive connectors)
Mailbox
The global settings will affect all the others. of course connectors will affect specific servers and mailbox one user. You have to set the global to the absolute max size you want to allow in your organization.
after you do this you will need either to set the 10MB on each mailbox
Get-Mailbox | Set-Mailbox -MaxSendSize 10MB -MaxReceiveSize 10MB
Then change the limit on specific mailbox
or another way is to create a transport rule that will reject the email if the attachment size it > 10MB unless the sender/recipient is the required user or group.
so basically create 2 transport rules
1. reject messages sent to anyone with attachment > 10mb unless the recipient is userX
2. reject messages sent from anyone with attachment > 10mb unless the sender is userX
Normal case it should not allow.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Need help for finding objects impacted by size change for an infoobject

hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variables

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

Size requirement for Speech

Similar Messages

Maybe you are looking for