Size restriction of a field in table maintenance

Hi,
I have a field of length 14 characters. i want to restrict it to 11 characters in the table maintenance. How can this be done ?
Thanks in advance.

Am not sure why you have requirement like this.
can you not create your field 11 char instead of 14?
And please close your duplicate thread do not post duplicate thread.
kindly support SDN.
Amit.

Similar Messages

Size restriction of a field in table maitenance

Hi,
I have a field of length 14 characters. i want to restrict it to 11 characters in the table maintenance. How can this be done ?
Thanks in advance.

Am not sure why you have requirement like this.
can you not create your field 11 char instead of 14?
And please close your duplicate thread do not post duplicate thread.
kindly support SDN.
Amit.

Disabling fields in table Maintenance generator

Hi Experts,
I would like to restrict some fields in table maintenance generator dynamically/ statically.
Here is the situation.
I have generated table maintenance for the table ZMARA and I have created three transactions for the above single table maintenance generator.
i.e .. Transaction      ---        Table
          ZT1                  ---         ZMARA
          ZT2                  ---          ZMARA
          ZT3                  ---          ZMARA
I am using above three transactions in my module pool program. Based on the certain conditions I am calling different transactions i.e ZT1, ZT2, etc
Here is my requirement:
Suppose if I call ZT1 transaction, I need to display only few fields. i.e ZMATNR, ZMTART, ZPRODH.
or remaining fields should disable. User should not allow to change the content, even if it is new entries/existing entries. only ZMATNR, ZMTART, ZPRODH.
Suppose if I call ZT2 transaction, I need to display only few fields. i.e ZMATNR, ZMTART, ZHTSCODE
How can we restrict dynamically when you call table maintenance generator table through transaction
or
How can we generate table maintenance for few fields?
Edited by: r badveli on Mar 16, 2009 4:27 PM
Edited by: r badveli on Mar 16, 2009 4:27 PM
Edited by: r badveli on Mar 16, 2009 4:28 PM

Hi ,
go to Se11->Table maintenace generation. Double click on screen to edit and assign the field you want to display/hide to groups. In PBO , after the following lines..
LOOP AT EXTRACT WITH CONTROL
TCTRL_ZMARA                         CURSOR NEXTLINE.
   MODULE LISTE_SHOW_LISTE.
ENDLOOP.
Write a new module in PBO and edit the SCREEN as per the Tcode, you are calling,,'
Hope this helps you
Rj

How to hide a field from table maintenance view?

Hi,
How to hide a field from table maintenance view?
The field is used for data created date. I need to hide it from display.
Thanks

Chk this link.
http://help.sap.com/saphelp_nw04/helpdata/en/66/33f52010dd11d6999300508b5d5211/frameset.htm
Maintenance Attributes
You can assign a maintenance attribute P to individual fields in the maintenance view definition in the Dictionary (SE11). It can be H (hidden)
H (hidden)
A field flagged H is not displayed on the screen. This field must also be filled in the background by a routine at an event.
The system writes R and H fields to the database like all other fields when a new data record is saved.

How to disable some of the table fields in Table Maintenance Generator

HI,
I am creating one table which contains 10 fields.
But i wanted to disable some 2 fields in Table maintenance generator.
So can any one plz tell me how to disable those 2 fields.

Generate a maintenance view for the table,
Goto- Table/Join Conditin Tab-- Put the name of your table
Goto-viewfield tab--- Put the fields whatever you required.
Then generate table maintenance for the view created.
pls chk
Thanks
Anurag

How to hide fields in table maintenance generator dynamically.

Hello Experts,
                     I have one requirement and that needs to do dynamically display the fields in table maintenance generator based on the selected radio button.I have written the code in pbo but it is not working properly,can anyone figure me out in this.
Thanks,
Vinod Bhaskar.

Hi vinod
     when you are creating tmg , you will specific a function group name and sap generate a func group which contains that tmg . you can view in se80 , specifying function group name. In that , screen contains single screen 100 or two screen 100,200 .
     screen you can create module in pbo .u can find all field name in that screen.
    loop at screen.
   if screen-name = ''.
   screen-visible = 0.
   endif.
   modify screen.
   endloop.
regards,
vijay.

Search Help for field on table maintenance generator ECC 6.0

Hi All.
To maintain search help for a custom field on table maintenance generator.
Only through coding.
Cannot use domain or data element or table field search helps.
Have to code only.
Is there any way?
Can I do modifications/additions to screen code and achieve this?
Regards,
Veeranji Reddy P.

Scenarion:
1. table with 2 fields.
2. table maintenance generator.
3. Function group with one screen(0001-mentioned in table maintenance) created.
4. For one field on table maintenance generator...where we add new entries to table, i want a search help.
Conditions : only coding has to be done..no search helps I can use.
Coding where and what?
one option is to code on the screen 0001- either in PBO/PAI.
Is it a rite place...? or any other option? But no search helps as mentiond in my first message can be used.
Thanks and Regards,
Veeranji Reddy P.

Max nos of fields in table maintenance generator screen

Hello,
Is there any restriction on the number of colums(fields) to be displayed in the screen of table maintenance?
Actually, I am having a Ztable with some 100 fields and when I generate the table maintenance using Single Screen, it give me error for dynpro creation. But it works with 68 or less fields.
Can anyone help me out in this?
Thank You.
reg,
Pankaj

Hi,
you can change your table:
if your table is like glt0 or lfc1,
you can assign month to key of the table :
FIELD     KEYFLAG
MANDT     X
BUKRS     X
GSBER     X
GJAHR     X
WAERS     X
MONAT     X "<-
WRBTR
Andreas

Open T-code on double click of field in table maintenance

Hi Gurus,
I have one scenario, I have to show a transaction on double click event on a field of Table Maintence.
Please guide me in this .
Is there is any event in Table Maintenance Events to capture double_click of a field.
Regards,
Sowmen

1. In the field attributes of the particular field there is a chechbox in display tab which says respond to double click, check that.
2. Assign the fuction code "PICK" for function code F2 in GUI status.
3.Now whenver you double click the field function code "PICK" gettes triggeed.
Now you can wrie yyou code based on this function code.
CASE sy-comm.
WHEN 'PICK'.
*If you want the name of the field and the value in that field use the below code.
GET CURSOR FIELD gv_field VALUE gv_cursor_value.
*DO your operation based on the field and the value.
ENDCASE.
Regards,
Smithesh

Add field in table maintenance generator screen of maintenance view

Hi,
I am having a table with field user-id. I want to generate a maintenance view which will have corresponding user name as input disabled field. Since there are two tables USR21 and ADRP I need to access(not a direct check table) I will have to modify the code generated by the table maintenance generator.
Problem is that it is having one internal table EXTRACT at table control loop. That internal table cannot be accessed if you write a module inside the table control loop and try to catch. The error coming as EXTRACT is not object of structure and therefore no component. I tried to capture the value of the Loop but could not be successful. Any suggestion please.
Thanks,
Atanu

Hi,
sample:
      MODULE LISTE_UPDATE_LISTE.
    ENDCHAIN.
*--->begin of your change
    CHAIN.
      FIELD YTAB1-BILKS .
      FIELD YTAB1-BILKH .
       module check_bewar ON CHAIN-input. "your checks
    ENDCHAIN.
*-----> end of your change
ENDLOOP.
MODULE LISTE_AFTER_LOOP.
-> module check_bewar is in an includ z123_INCL
Regards Andreas

Missing Date fields in table maintenance generation

I have some non-key date fields in my custom table and have noticed that they do not get generated on the overview screen of my two-step table maintenance dialog. They are present on the detail screen.
If I change the domain of the fields to CHAR they appear.
If I change the maintenance type to one-step they appear.
It seems it is standard behaviour for date fields to be omitted from the overview screen.
Can anyone confirm that this is standard behaviour or give an explanation for date fields being treated in this manner?...or come up with a way of including the fields on the header screen.
I already know that I can:
1. customize the screen to include the fields
2. create a non-date domain for the fields which uses date-type calendar dropdown
Thanks,
Neil

Thankyou Jonathan, I would have been too lazy to go into debug if I didn't have the form name you supplied! It wasn't the reason you suspected but it was failing the following check in that routine:
maintenance in list screen required?
      CHECK p_tvdir-type = one_step_maint OR
       ( <w_dfies>-keyflag NE space    "force only keyfields
        OR ( 'CHARNUMC' CS <w_dfies>-datatype     "and view char-fields
         AND p_skip_fields = space )
        OR ( 'CHARNUMC' CS <w_dfies>-datatype     "and view char-fields
         AND <w_dfies>-intlen GE 20 )       "int 3263961/2000
        OR <w_dfies>-rollname = 'BEGDA'    "time dependence
        OR <w_dfies>-rollname = 'ENDDA'    "time dependence
        OR <w_dfies>-tabname NE p_gencb-viewname ). "or text table field
Because the datatype was DATS.......looks like it will only include key fields and CHAR, NUMC non-key fields or those with a rollname of BEGDA/ENDDA or texttable fields. In debug I changed the datatype to CHAR and it generated with my field included. I think there might be an OSS note to fix this but haven't found it yet.

Currency field in Table maintenance generator

Hi,
I have created a table with fields amont and currency..When I create generate the table maintenance for this table I am not able to see currency and amounts field on the generated screen. Please do help me whats missing from my end.
raghu

make the foriegn key for the currency TCURC
This was for those whose currency keys are not maintained
Resaon might be the Currency is not maintained in the table TCURC
they can be maintained in SPRO
SAP Netweaver - > General Setting - > Currencies - > Check Currency Codes
Regards
- Gopi

How to Set Position Cursor Option to Non key fields in Table Maintenance .

Hi,
I have created a Ztable and i am using table maintenance for that table. In TMG ,by default we have position cursor option to key fields only . User wants that position cursor option for non key fields also. Please help me out of this issue .
How to provide Position Cursor option to Non key fields.
Thanks & Regards,
Prasad.

Hi Nabheet,
I tried using TYPE S DISPLAY LIKE E and am setting vim_abort_saving as X and sy-subrc as 4. However, this is also not enabling the fields. In this case, the first 2 fields - key fields are getting enabled but not the required ones. The above snapshot is for the same.
lv_date1 = table1-date1.
   lv_date2 = table1-date2.
   lv_diff = lv_date2 - lv_date1.
   IF lv_diff LT 0.
     CLEAR: lv_err_msg.
     lv_err_msg = text-005.
     MESSAGE lv_err_msg TYPE 'S' DISPLAY LIKE lc_e.
     vim_abort_saving = lc_x.
     sy-subrc = 4.

Validating non key fields in table maintenance generator

Hi,
I ma using events for table maintenance generator event 05 ,there i want to validate non key fields ......i am throwing error message ....all the non key fields are getting in display mode ...i need them to enable to enter values ....
please suggest
Thanks,
Shailaja Ainala.

Hi Shailaja,
Its property of error message, which makes it as non-editable.
You can display either status or info message after validation check.
And finally before saving (before save event) display error message, so that it invalid entries doesnt get saved.
Thanks,
Nisha Vengal.

In disable fields in table maintenance

Hi,
In table maintenace I have done with save user id and last changed date. Now I need to make this fields disable(in gray), means no it should not be edited manually in table maintenance. It should only pick up the system.
if any one have code for this and also in which maintain event i need to do this, please post me.
Thanks in Advance,
Ravi

hi,
in SE80
goto Function Group
then click on Screen
then click on Element List Tab
below u can see list of ur fields strting with ZTT-......
and against that u can have to uncheck the checkbox in INPUT column ......
so that the input for the field will be disabled..... when u go in edit mode......
if any query revert back........
reward points if useful.......:-)
and mark the post answered once ur problem is solved ....

Size restriction of a field in table maintenance

Similar Messages

Maybe you are looking for