Size-to-Fit problem, Planning 9.3.1

I'm having a problem with a new install of Planning 9.3.1 (with Patch 1).
When I select "Size-to-Fit" from the options for column size, it doesn't work. The columns don't resize themselves to fit the data, and I can not resize them by dragging the mouse on the column header.
Things work normally when I select other size options. Very odd.
Anyone seen this or have an idea what's going on?
-- Joe
(P.S. no JavaScript errors indicated in the status bar)

Joe,
I can confirm some pretty strange behavior with Size to Fit at my location.
What I'm seeing in 9.3.1/IE6 is when I select that option are columns that are just a bit under one character wide. The header members are three characters wide.
I also cannot size the columns in IE6.
In Firefox 2.0.0.14 (yes, I know, not supported, but I like it a lot better and it works for me) I can resize the column headers but it has no effect on the rows below the header. I can't do this in IE6 (probably shouldn't be able to).
These are forms that were created natively in Planning 9.3.1.
Regards,
Cameron

Similar Messages

Indesign Bug with Auto-Size and fitting in Anchored frames

Hi,
Steps to reproduce:
1. Create a text frame with 2 Anchored text frames with the same width.
2. Make the anchored frames Auto-Size --> Vertical only
3. insert text to the first frame, when type enter to the next line the frame become higher but the next frame remain in the same position. just after typing the first character in the second line the next frame adjust in the right position.
4. The same happen when pasting text that make the frame bigger.
5. The same happen without Auto-Size when fit frame to content.
Does anyone knows about it?
Any idea how to bypass?
Thanks

This is a user to user forum with "some" Adobe staff participation, report bugs at this link
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bugs or feature requests

I have a iPad Keyboard Dock for the iPad 1. I purchase an iPad 2 and the dock worked fine for a week no fit problem none worked. I received a tiny message about iPad Keyboard Dock it stop working immediately after dismissing message.

I have a iPad Keyboard Dock for the iPad 1. I purchase an iPad 2 and the dock worked fine for a week no fit problem none worked. I received a tiny message about iPad Keyboard Dock it stop working immediately after dismissing message.

Hi and welcome..
Connect your iPad to your computer. Launch iTunes. Make sure your iPad is recognized in iTunes under Devices on the left.
Select the Summary tab then click Update.
Just to make sure your iPad software is up to date.
Carolyn

Set front panel size to fit different monitor ( 2 monitors-pattern to 1 monitor-pattern)

Hello, Everybody,
I have here some questions about front panel size.
At first I have create my LabVIEW programs with 2 monitors and run them with 2 monitors, because of this reason I have created a huge front panel with many objects.
But sometimes I will run the program only with 1 monitor, the problem is, the front panel is too big, I can not see the front panel with all objects completely on one monitor! I know, I can scroll aroud it, but I don´t like this way. I would like to set the front panel size automatically to fit the window ( to differenz window sizes or resolutions), how can I do that?
I have tried with "Maintain proportions of window for different monitor resolutions" and "Scale all objects on front panel as the window sizes" to finish that, but they did`t work, I can not see the front panel at once on one monitor;-(
Can you help me?
regards,
Johnny

As noted in the KB article What Is the Difference Between the Options
"Scale All Objects on Panel" and "Maintain Window Proport..., the "Scale All Objects on Panel causes all the objects inside the panel to scale when the panel itself is resized". If the panel isn't resized, the objects arent's scaled. You may also want to read the KB article How Do I Scale All of the Objects of My Front Panel with the Window Size?.

Screen Size not fitting in the Window

For some odd reason, yesterday my MBP display started acting up. Regardless of the dimensions selected, the screen size will not fully fit in my display. As I move the mourse around the screen, the display area shimmers. At times the top menubar is not visible.
It's like it only displays about 1420 x 880 of a 1440x900 resolution at one time. Ditto for other screen resolutions.
All is up to date. I do have Parallels on this computer, but I don't think this is causing the problem. (It also ccurs when Parallels is not launched)
It might have occured when I tried to sync into an LCD Projector and had mirroring turned on ???
Anyone else experience this bizarre behaviour?
larry

Excellent Larry... as always, a pleasure
It's a very useful feature to know. It enables the user to zoom right in for a close-up and right out again. After it's enabled via the key combo in my previous reply you simply press Command(Apple) + Option(alt) + = to zoom in and Command(Apple) + Option(alt) + - to zoom out. When you move the cursor the screen moves also. As you've discovered pressing Command(Apple) + Option(alt) + 8 disables/enables the feature.
RD

Photoshop 11 Size Print -out Problem

I have recently purchased and installed Photoshop 11 and I am having problems with my print-out. I am specifying an A5 size print, it is being shown on the preview as being 1/2 of A4 but is printing out as a 6" x 4" . I have tried thios several times but I am unable to overcome this problem. Is this a program error or can you offer me a solution for this problem?
Best regards, Evan Thomas

Make sure that 'Scale to fit' is not checked in the print-dialogue box, and that the scale is set to 100% (bearing in mind that your document size must be correctly set in Photoshop before you print).

Image size and placement problems

I recently posted my website with iWeb. It shows up well on some computers, but on some computers the image is too large to fit on the screen and (bizarrely) the image sometimes starts halfway down the screen. This seems to happen without regard to browswers -- I have had problems on Firefox, Safari, and Explorer, but have also had it show up fine on all three of those browsers (on different computers).
I checked that the padding around the image is zero. What else could I change? I understand that the image could appear as a different size on different computers, but I don't understand why the image should show up halfway down the screen on some and on the top (as it should be) on other computers. Thanks!

The image apparently was added it to the page since it can be clicked on and dragged to the desktop. The image size is 1200 pixels wide by 600 high. You can trim off either side of that image to make is narrower so it will not force the page so wide. If you set the browser's background to the color of the the photo's background, the page background to none and make that photo narrower that will make it fit better.
Since Apple suggests that a page be 980 for iPhone compatibility trim 110 pixels off the left and right edges of the photo and make sure the photo is placed at the top of the page (remove the navbar and set the header to zero in the Inspector/Page/Layout jpane).

Need solution for auto-fit problems

I've got a form with 7 text boxes that I'm looking to get copy to auto-fit properly. I'd also like to flow the content without having to start from scratch with a new form.
Here are my problems:
- "Expand to fit" is grayed out for both the height and width on every text box.
- "Allow page breaks within content" and "Keep with next" are also grayed out on every text box.
- I also have "make fixed-size text object auto-fit while editing" checked to perform in my options and it's not doing that at all.
HELP!!!! Thanks.
Gabriel Daigle

Tried this. Didn't work. All those items mentioned previously, as well as anything having to do with subforms, are grayed out. Even tried a new document with flowable layout, added text boxes, and everything is still grayed out. Any other solutions out there?

Actually 2013 Visio, Changing size of completed floor plan drawing.

I completed a very detailed drawing in Visio that is 24" x 36" and in Portrait. It was the only way I could get it to print it on our printer. However, I wish to change the drawing size to Ledger (11 x 17) and in Landscape. Visio
only changes the paper size and not the scale or orientation. so I get pieces of the 24" x 36" Portrait drawing on multiple pieces of Ledger paper in landscape. How can I change that? or if I want to change to landscape and remain in
24" x 36", so that I am looking/working at the drawing in Landscape.

Hi,
According to your description, my understanding is that you want change the drawing size from 24" x 36" to 11" x 17and the floor plan shapes fit the drawing size.
If it is, I recommend we modify the "Drawing scale" manually to fit the page size.
Click Design Tab>Size>More page size>Drawing scale
If I misunderstand something, please let me know, or you may upload some images in the thread.
Regards,
George Zhao
TechNet Community Support

CP-88XX photo size not fit

Hi,
I have to take a mass photo to push as the CP-88XX phones as the background image, but I set the photo size according to the CP-88XX datasheet, but I discovered the size is not correct.
Finally, I got the photo not fit the size into the phone. Do u meet the same problem?

Have you looked at this bug?
Documentation: background image size/path for 88xx phones is 800x480x24
CSCus27001

I want to make 4x6 study notecard/flashcards, how do I change the page size to fit the cards I need, I want them to print on a standard size paper, but keep the text in a 4x6 margin, new to mac please help!!

The Idea is to set my paper size and page layout to a pre-screened 4x6 layout, which I can add and insert txt/pictures, when I need to print, I should be able to fit 2 per page, if not that's okay, but when I print them I will cut off the excess paper and glue the rest to a notecard, any ideas, NEW TO MAC PAgES

Star with:
Menu > File > New from Template Chooser > Sidebar > Page Layout > Blank > Blank Canvas
If you need to have two cards on one page then just set up one using text boxes and images to the 4 x 6 (inches?), group them and option shift drag a second copy down the page so you then have 2 and alter the copy as you need.
Change the text and images to placeholders, capture those as a Layout and then save that as a template.
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&highlight=labels &mforum=iworktipsntrick
1. To make the individual card follow the instructions for Labels & Business cards but use your size:
2. To make the placeholders see Double folded Greeting Card.
3. To make the template follow Letterhead and follower sets ignoring the irrelevant bits, and only capturing one page, before saving as a template.
Peter

Firefox does not load long images, pixelates images if they are not in their original size, and has problems with thumbnails (in some sites)

Firefox has problems with images.
In sites like deviantART or ImageShack with full-view option, images that are not in full size/thumbnails get slightly pixelated e.g. http://img251.imageshack.us/f/screenshot2tq.jpg/
Long images get completely messed up if full-viewed e.g. http://img689.imageshack.us/f/screenshot5z.jpg/ (though if the file is only big, it loads just fine)
Also, thumbnails in some sites get messed up e.g. http://img201.imageshack.us/f/screenshotyr.jpg/
And in general, Firefox has more 'glitches' like not allowing to add more search engines. It wasn't like that before and I can only assume that it got messed up somewhere with updates, but I'm not really sure.
I've tried cleaning out cache, re-installing Firefox (multiple times) and even downloaded Firefox 4 beta, but the problem remains.
I use Ubuntu.
Does anyone else have similar problems? Or know where the problem lies?

Do you have the latest driver for your graphics display card?
Create a new profile as a test to check if your current profile is causing the problems.
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Problem-planned order start date in the past

I use PP-PI - After MRP run, planned order was created and has exception message "06-start date in the past" its make me wonder because before this problem occur we already tested many time and never found this message(06). then i check in OPPR- field "start in past" is blank, OPPQ- field "Start in past" are not check, OPUZ-Scheduling Type is backwards and field "Start in the Past" is blank, OPU5-Scheduling Type is backwards and field "Start in the Past" is blank.
do any guru know why system not use forward scheduling when found that start date in the past? or have any config of other module which may lead to this issue?
thank in advance.

In OPU5,
Check the setting for correct MRP group which is assigned in material master or in the SPRO node
Production >Material Requirements Planning>MRP Groups-->Define MRP Group for Each Material Type.
check and come back

Image size and stacking problem with FF12 even in safe mode. Images are 5x the right size and overlayed on top of other pictures or text. how to fix?

OK this problems limited to Facebook only. When logged in FF12 the entire page is scrambled. The pictures are stacked over each other and are 5 to 6 times the size their supposed to be. I have tried everything I could think of to fix this it even runs like this when in safe mode. I have uninstalled all plugins and all extensions I have uninstalled and even tried back dating FF. it's still so massively out of proportion that you can't do anything. .even when zoomed out 3x it's so large the pictures are larger than my screen. They are still overlapped so bad you can't do a thing with it. Even worse I uninstalled and installed pale moon and the effects migrated to that browser as well. Only browser I found unaffected by this is IE. Lord knows I don't wanna ever have to go that rout so I'm asking for help. I have a whole list of parsing errors and decoration drops, to many to post. any help would be much appreciated until it's fixed I'm stuck with IE. Chrome wont work with the software I run only IE or FF will.

-> press '''CTRL''' + '''0''' (zero) to '''Reset''' Zoom
* For details, see this article -> [[How do I use Zoom?]]
Check and tell if its working.

Burning not allowed in iDVD, Size is the problem?

Im workin on my iMac iCore 5 with iDVD 7.1.2 and Leopard OS 10.6.8. Try to finish a project with two .mp4 files below 3.05 Gb but when I try to burn it out, it tells me Im exceding the maximum size to work with. Im using 4.7 DVD R discs. What is the problem?. What files do it accept?, Can I use .mp4 or should convert to another format?.

Actually in contrast to popular belief size is not important as far as iDVD is concerned. It's playing time that is important. With a single layer DVD-R disk you can have up to 120 minutes (including menus) on a disk. If you have more than 60 minutes of playing time you should use Professional Quality encoding. If the playing time is less than 60 minutes use High Quality.
Follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Size-to-Fit problem, Planning 9.3.1

Similar Messages

Maybe you are looking for