Sizing for SRM 5.0

Dear all.
I stating the studies for an SRM implemetation and I am trying to do a sizing for the machine.
So I would like to ask you some examples of machines you are using.
We will have 270 users using shoppung carts in low activity and 30 users in contaract management and bids.
Thanks in advance
Nilson Fonseca

HI Nilson
Check this servers models since your number of users are less and at a given point say not more than 50 users will access you may opt any of this models -
model of the server
P.E.2600
P.E.2650
P.E.2650
P.E. 6600
HP DL 380
speed of the server
Xeon 2.4 GHz
Xeon 2.8 GHz
Xeon 2.8 GHz
Xeon 1.5GHz
3.2 GHz
memory of the server
4096MB
2048 MB
2048 MB
4096 MB
2048 MB
total hard disk capcity
2 x 36 GB, 3 x 73 GB
5 x 36 GB
5 x 36 GB
2x36GB, 3x73GB
2 x 36 GB
Pls corelate the first with first in each case.
for more information pls refer site
http://service.sap.com/instguides (install and upgrade
guides)
Re: installation of ECC, XI and SUS on same instance
Re: sizing SRM 5.0 SLD with XI - hardware
Regards,
Nimish Sheth
pls reward points for helpful answers

Similar Messages

Sizing for SAP CLM

Hi experts I would like to know how can I create a sizing for CLM, I tried in SAP quiclsizing page but not found nothing.
Some help will be welcome.
Nilson Fonseca

Solved
Must go to http://service.sap.com/instguides - SAP Business Suite Applications - SAP SRM - SAP E-Sourcing 5.1/ SAP CLM 2.0 - SAP E-Sourcing 5.1 Sizing Guide
Thanks
Nilson

HANA Sizing for Business Suite Systems (Compression)

Hi Experts-
We ran the HANA memory sizing for our ERP and SRM systems (both are on
NW 7.4, ECC is on EHP7 and SRM is on EHP3). We followed SAP Note "1872170 -
Suite on HANA memory sizing report" to complete this task.
We are little surprised by the results as we don't see much compression in the target data in HANA DB. I have attached the screen shot of a ECC system with the message which has the spool results. We are getting a difference of only about 100 GB from before in terms of size and compression. The original size of ECC system is 1.1 TB.
What is general compression achieved in Business Suite migration to HANA DB? (if anyone has done that so far).
-Amit

Amit,
in this FAQ Sizing for SAP Business Suite powered by SAP HANA you can research more information about sizing.
In this FAQ is also a link to a HANA sizing white paper, which explains the results of the sizing reports.
thank you
erich

Separate Portal needed for SRM component

Hi,
We are having an EP portal for ESS, MSS scenario.We are also implementing SAP SRM which requires portal as frontend. Just wanted to know whether we can user existing portal(having ESS,MSS) for SRM as frontend?
Please let me know any pros and cons of having separate portal for SRM and not having also.
Thanks and Regards,
Sanjay Patwal

Running SRM with ESS/MSS/BI is not a problem. They are simply different applications running on the same infrastructure.
Your question can also be phrased as 'Should I run on a separate JAVA instance'. Well if you think your ESS/MSS portal is already under strain, then yes putting on SRM will also increase the load unless you scale your portal sizing.
Secondly, some clients like to separate out SRM and ESS/MSS so that there are no interdependencies when it comes to patching. For example you may be patching your SRM ABAP, which will in turn require a patch to SRM Business Package which may in turn require a patch to JAVA engine which may impact ESS Business package. Managing the sp stacks can be a little tricky if you run all your apps on one portal. So you can split them out and federate.
Just some thoughts...I know it doesn't tell you exactly what to do. Essentially it is not a problem...It is a question of strategy. In the past I've used SRM on same portal as ESS/MSS and used the SRM JAVA Portal for external users.
Regards
Mr.T

Sizing SAP SRM CCM 2.0

Hi Folks,
Has anyone sized the CCM 2.0 servers. The quick sizer do not have a questionnaire for the sizing the same. Is there any reference some one can provide me with?
regards
Unni

Hi Unni,
CCM is an add-on component of mySAP SRM application. So, sizing for an SRM EBP system would suffice your requirement for CCM to be installed.
Do you have SRM EBP in place?
Thanks,
Sailesh K

Best Practices for SRM Installation !!

Hi
can someone share the best Practices for SRM Installation ?
What is the typical timeframe to install SRM on development server and as well as on the Production server ?
Appericiate the responses
Thanks,
Arvind

Hi
I don't know whether this will help you.
See these links as well.
<b>http://help.sap.com/bp_epv170/EP_US/HTML/Portals_intro.htm
http://help.sap.com/bp_scmv150/index.htm
http://help.sap.com/bp_biv170/index.htm
http://help.sap.com/bp_crmv250/CRM_DE/index.htm</b>
Hope this will help.
Please reward suitable points.
Regards
- Atul

Automitic source of supply assignment in backend system for SRM

Hello Experts,
I am facing one issue regarding source of supply for SRM purchase Requisitions in backend ECC system.
When we create a shopping cart in SRM 5.0, a purchase requisition is created in backend and has source of supply assigned to it.
I donu2019t want to assign source of supply to purchase requisitions created for SRM.
Can you please suggest how to achieve this?
Also I think, SRM is internally using BAPI u201CBAPI_REQUISITION_CREATEu201D from backend ECC system for creation of requisition. This BAPI has an importing parameter u2018AUTOMATIC_SOURCEu2019, and if we pass space to this parameter, it creates requisition without assigning source of supply.
If this is correct, then can I use any BADI or customization in SRM to set the value of this parameter as space when SRM calls this BAPI?
Thanks in Advance.
Thanks and Regards,
Sanjay

SPRO--> SRM > SRM server> cross application basic settings --> Define objects in backend system (PR,RS,PO)
waht is the settings you maintained for your product category / purchase group - external procurement .
the above setting determines your follow on documents in the backend systems.
as discuused in the thread are you using any BADI ?
Unable to create PO in backend system for a text material in Shopping cart
peter offers how to debug to ..in the above link.
br
muthu

Goods Movement Not allowed(XWAOK) check box - for SRM Reservations.

Dear Experts,
We are working on Extended Clasissc sceanrio however certain materails we are creating reservation switching from ECS to Classic Scenario. System is Creating Reservation successfully in backend but Goods movement reservation allowed (FIELD XWAOK) check box not checked only for SRM Reservations
Please note that ECC reservations checking this checkbox automatically based on Configuration. Is there any setting we have to do in SRM to pass the check box value to ECC? or How Can i check what data is passing from SRM to ECC......
Thanks
Ravi

Dear Ravi,
Could you please check if you have added the value '201' against the attribute movement type (forgot the attribute name) for the purchasing group or user group who created the shopping cart in SAP SRM. Once you have added the attribute, the problem should be resolved.
Thanks and regards,
Ranjan

Best Practice transport procedure for SRM-MDM Catalogue repositories change

Hi,
I have a question regarding SRM-MDM Catalogue repository change transports.
We currently have two QA servers and to Production servers (main and fail-over).
We are investigating the need of a Development server.
Changes are being made to the repositories on the system, and I see the need of a dev server.
What is best practice for SRM-MDM Catalogue?
With only QA and Prod environments I guess Repository schema transport is the best option, since there has not been created a Refference file (which is needed for change file transport).
Any other options?
We are running MDM as well, with dev, QA and prod environments. Here we use CTS+ for transports.
Is it best practice to use CTS+ also for SRM-MDM Catalogue transports?
KR,
Thomas

Hi Thomas.
What is best practice for SRM-MDM Catalogue?
SAP recommends to have the landscape model like DEV-QA-PROD.
So in case of catalog as well if we follow the same technique it will help you to have a successful implementation
Any other options?
As a part of proceeding with the CTS+ you need to create a reference file
Refer the Link: [CTS+|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0dd1ae0-36e5-2b10-f8b4-e6365e643c0b?quicklink=index&overridelayout=true] for more details
Is it best practice to use CTS+ also for SRM-MDM Catalogue transports?
It is upto the requirement. if you feel there are many changes in catalog xml schema in various phases in an automatic manner then you can go ahead with CTS+ or you can perform the existing method of exporting and importing the schema to the repository.
Hope it helps.
Best Regards
Bala
Edited by: chandar_sap on Sep 28, 2011 12:17 PM

SRM "one-client" installation on ECC 6.0 EhP: Own client needed for SRM?

Hello experts,
i've a question concerning the SRM "one-client" installation on ECC 6.0 EhP4 as Add-On.
Is it possible to use SRM and ERP funtionality in a single client e.g. 001?
Or do we have to use different clients on the system like for SUS?
I haven't found any information regarding this topic in SAP ressources. I'm currently using CG "SAP SRM on One Client in
SAP ERP" Release date 2008 (found on marketplace/srm-inst --> srm7.0); SRM - Technical Basis Configuration (BuildingBlock S00/S03). I'm facing problems while going through the following customizing steps:
Assign logical System to Client [both logicall systems are on the same client (001)] ==> error while trying to reference the second logical sys. because client (001) cannot be used again (own presumption: error message differs)
I've seen that some of you have successfully installed and customized this szenario. If someone could provide me any helpful information or guideline how to proceed in general... would be great...
Best regards,
PATRICK

Thanks for your reply. I've checked the offline documentation because i've no access to solman.
There is a document which describes the steps for configuring one-client customizing on marketplace.
Link: [SAP SRM 7.0: SAP SRM on One Client with SAP ERP|https://websmp203.sap-ag.de/~sapidb/011000358700001201562009E]
The problem is that its impossible to cofigure the system like it's described in the document.
Let me explain why...
SRM Addon is installed and customizing is done in client 001 (same client as erp)
overview about defined logical systems:
-ONECLNTERP (for ERP is defined)
-ONECLNTEBP (for SRM is defined)
When I try to assign the logical system to client 001 it works for the first entry
for the second log. system it shows up an error message.
-->I assume because client 001 has been already assigned. I cant use client 001 again.
But One-Client szenario schould be possible in a single client or is SAPs One-Client more like One-System with differnet clients for SRM and ERP on the same machine?
Because of the above mentioned problem I assume that it's impossible to run ERP and SRM in the same Client number.
Am I right? Do I have to use two Clients on One System for proper Customizing?
Or if it's possible to use a single client on one machine for both ERP and SRM how is it possible to assign two log. systems to one client number?
I'm totally confused. Any help would be appreciated - any tips/hints/experiences from someone who has customized One-Client?
BR, Patrick

Business System not reflecting the XI Content for SRM

Hi,
We are currently working on the SUS-MM scenario.
The landscape includes PI 7.11, SRM 7.0 and R/3 4.6C. SLD Communication is working fine between these systems.
Integration Builder has SRM Server 7.0 and SRM Server IC 7.0 imported.
The current status:
We can successfully transfer vendors from SAP R/3 to SUS
We cannot transfer transaction data from SAP R/3 to SUS, e.g. purchase orders etc
Our Main Issue:
The Business System INTEGRATION_SERVER_<SID> is imported into the Integration Builder from the SLD.
On the Display communication component screen, the receiver and Sender tabs are not showing any of the SRM Server or IC components that have been imported into the ESR. However is displaying only the BASIS components that was imported during inital install.
Because of this, we are not able to proceed with the configuration though the interfaces being available in the ESR. We are not sure what is that we are missing that is preventing the XI content for SRM from being displayed. Also, the PI business system in the SLD has the SRM Content listed under the installed products list.
Any help would be appreciated.
Thanks
Venkat.

Hello,
do you have a solution? I'm facing the same issue.
Regards,
Sven

How to setup the portal with the uniform style for SRM + Esourcing?

how to setup the portal with the uniform style for SRM + Esourcing? We will setup SRM 7 + esoourcing + portal, but as we know esourcing screen style is not same with SRM, so how to uniform the style between this 2 diffirent software? any body have idea?

Hi,
SAP E-Sourcing 6.0 is the solution. It is same look&feel.
Regards,
Masa

Blocked invoices for SRM PO

Dear All
I have requirement in that i need to create blocked invoices for SRM PO's . I have created a PO in SRM portal . Now the invoice need to be done at R3 side but i am not aware how i can create a invoice for the SRM PO's .
Any one help me on this .
Regards
Sunanda
Edited by: SMABAP on Dec 31, 2008 7:36 AM

Hi,
please check whether your PO has sent to R/3 system or not . if it is there in R/3 then please create a PO with MIRO transaction.....
Before creating the invoice please check whether vendor has GR based invoice vertification or not...
if you are not able to do then ask your FI team to do this....
Thanks
Ravi

Advice on saving DVD video and re-sizing for the web

Hello...
I'm looking into purchasing a copy of Adobe Premiere - but I need advice on which version I need - and if it can do what I'm after.
I want to transfer my own video work from DVDs and save them as MPEG4 files. I then want to upload them on to my website. They'll be about 10 minutes each each DVD will have several videos on them.
Is Adobe Premiere able to do this...? If so which version would suit me best? It's simply to do the above with no editing, just re-sizing for the web and saving as an MPEG4 file.
Thank you for your help and time in advance.
philip

For web video creation, I use a program called V2F. It creates Flash rather than mp4, but if you're not stuck on that format, the files are very good quality.

Need to create a Web Dynpro Application for SRM Portal

We need to recreate the start page for SRM Portal - (Supplier Self-Services) - without any images (as was delivered out of the box) - basically we need to break it down into 4 iViews: All Purchase Orders; All Sched Agreement Releases; All Invoices and Credit Memos; and Account History. All these iViews contains links.
How would one create a Web Dynpro Application to create the above iViews?
Regards,

Hi zhang,
take a look to this:
KM:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/kmc/resource%2band%2bcollection%2bversioning%2busing%2bkm%2bapis
https://help.sap.com/javadocs/NW04S/SPS09/km/index.html
Excel:
/people/subramanian.venkateswaran2/blog/2006/10/02/enhanced-file-upload--uploading-and-processing-excel-sheets
Hope this help you.
Vito

Sizing for SRM 5.0

Similar Messages

Maybe you are looking for