Sizing issue when pasting corner pin data from mocha ae onto a solid layer. Please help!!

When I bring in my corner pin tracking data from mocha ae and paste it onto a solid layer that I created, it sizes the layer to the corner pins, but I want it to stay the whole size of the screen. I'm following a tutorial at the address http://www.videocopilot.net/tutorials/sub_surface_skin/ and there is no mention of this problem in the tutorial. I am following the tutorial exactly, and using the latest version of After Effects. Any help would be much appreciated.

I took some photos of a simpler version of whats going on.
Just in AE with my footage.
About to track in mocha.
Tracked in mocha (only tracked half because i didnt want to wait).
Adding a solid to paste my corner pin data to.
Masked it to where I wanted it.
Selected the type of data I wanted.
Copy to clipboard.
Paste.
Great... the insert image thing grayed out.
Going to have to post the last pic separately.

Similar Messages

When I go to my iTunes Store and download something, for some reason it's not letting me download app it's saying there's a billing issue, when I correct it, it's says contact iTunes/ support can someone please help me, I really want too listen to paying

When I go to my iTunes Store and download something, for some reason it's not letting me download app it's saying there's a billing issue, when I correct it, it's says contact iTunes/ support can someone please help me, I really want too listen to paying

You need to do as provided - contact iTunes Store support.
http://www.apple.com/emea/support/itunes/contact.html

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

How to display multiple data from different table in one table? please help

Hi
I got sun java studio creator 2(the separate installation not the one in the net beans)....
My question is about displaying data that have been taken from the database.... I know how to display data in a table(just click on the table "bind data" )... but my question is that:
when i want to use a sql statement that taken the data from different table...
how can i display that data in the table(that will be shown in the web) ??? when i click bind data on the table i can only select one table i can't select more than one....
Note:
1) i'm using the rowset for displaying the data in the table, since the sql statement is depending on a condition(i.e. select a from b where c= ? )...
2) i mean by different table is that( i.e. select a from table1,table2 )..
thanks in advance...

Hi,
937440 wrote:
Hi every one, this is my first post in this portal. Welcome to the forum!
Be sure to read the forum FAQ {message:id=9360002}
I want display the details of emp table.. for that I am using this SQL statement.
select * from emp where mgr=nvl(:mgr,mgr);
when I give the input as 7698 it is displaying the corresponding records... and also when I won't give any input then it is displaying all the records except the mgr with null values.
1)I want to display all the records when I won't give any input including nulls
2)I want to display all the records who's mgr is null
Is there any way to incorporate to include all these in a single query..It's a little unclear what you're asking.
The following query always includes rows where mgr is NULL, and when the bind variable :mgr is NULL, it displays all rows:
SELECT *
FROM     emp
WHERE     LNNVL (mgr != :mgr)
;That is, when :mgr = 7698, it displays 6 rows, and when :mgr is NULL it displays 14 rows (assuming you're using the Oracle-supplied scott.emp table).
The following query includes rows where mgr is NULL only when the bind variable :mgr is NULL, in which case it displays all rows:
SELECT     *
FROM     emp
WHERE     :mgr     = mgr
OR      :mgr      IS NULL
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL it displays 14 rows.
The following query includes rows where mgr is NULL only when the bind variab;e :mgr is NULL, in which case it displays only the rows where mgr is NULL. That is, it treats NULL as a value:
SELECT     *
FROM     emp
WHERE     DECODE ( mgr
            , :mgr, 'OK'
            )     = 'OK'
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL, it displays 1 row.

Delete data from a flat file using PL/SQL -- Please help.. urgent

Hi All,
We are writing data to a flat file using Text_IO.Put_Line command. We want to delete data / record from that file after data is written onto it.
Please let us know if this is possible.
Thanks in advance.
Vaishali

There's nothing in UTL_FILE to do this, so your options are either to write a Java stored procedure to do it or to use whatever mechanism the host operating system supports for editing files.
Alternatively, you could write a PL/SQL procedure to read each line in from the file and then write them out to a second file, discarding the line you don't want along the way.

TS4036 I have downloaded icloud but when i create a list on my iphone 5 it is not synching with my computer or ipods. Now i cannot even download playlists from my computer onto my devices. Please help.

I have downloaded icloud and now cannot sync any of my ipods or iphone5 from my computer. I can create playlists no problem on my phone but it is not automatically syncing with my other devices. I need to update my playlists onto my ipods but since using icloud can no longer do this. What am I doing wrong.
Thank you

SADLY not as i downloaded an upgrad to my original PAGES/
i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
but what a waste of time as it doesn not save any changes done automatically back in the cloud....
i am now downloading the new LION and hope that it will fix the problem
i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
and the same magic was supposed to happen in reverse.
It doesn't/
if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
I hope the new lion will help resolve the isssue/
any other ideas> keep em coming...thank you so much.

I got a new computer and wanted to download my music from the cloud onto my new computer. please help

How

Welcome to the Apple Community.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.

Mocha Corner Pin Data Changing Scale of Solid Layers (CS6)

Hi, im new to the adobe forums (not after effects though) and im having some trouble with Mocha tracking corner pin data. I have been practicing this sub-surface skin effect from Iron Man 3 that Video Copilot made a tutorial on, but im having some problems. The first time i did it, everything went fine. I got the effect the way I wanted it and it looked amazing. The second time, things began to go wrong. I had all my footage elements in the correct place and pre-composed. I had tracked out everything in Mocha previous to creating the effect. I selected the correct corner pin data type (the one that does not support motion blur) and copied to clipboard. I pasted it onto the composition with all the effects footage and... it got about 3 times smaller. Ive tried to do this many times since then and it keeps happening. Ive resorted to using a null object when this happens, but i want to know what im doing wrong. Ive looked all over the web and someone has probably posted a fix somewhere, but im tired of looking. Please, if you know whats going on, reply.
Thanks Again,
DaKernel
CS6 of course

I took some photos of a simpler version of whats going on.
Just in AE with my footage.
About to track in mocha.
Tracked in mocha (only tracked half because i didnt want to wait).
Adding a solid to paste my corner pin data to.
Masked it to where I wanted it.
Selected the type of data I wanted.
Copy to clipboard.
Paste.
Great... the insert image thing grayed out.
Going to have to post the last pic separately.

Modify vendor number when replicating vendor master data from ECC to SRM

Hi,
Is there a way to modify vendor number(manually input vendor number e.g. from a file) when replicating vendor master data from ECC to SRM using the vendor master data user exit (SAPMF02K)?
Does anyone have documentation on the user exit, how do I use it??
Thanks and Regards'
David

Hi David,
Please go through the link below:
[Enhancement SAPMF02K Vendor Master Data - question about LIFNR;
Regards
Anirban

Do I have to use lock when I am reading data from a table

Hi,
When i am reading data from a table , do I have to set a lock on that table .
Is it necessary for us to set the lock on a table when I am reading data from the table.
When I am updating the table , do I have to set a lock on the table ?
If yes, then what sort of lock-read lock,write lock or shared lock?
Regards,
Sushanth H.S.

check it out,
Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.
SAP Provide three type of Lock objects.
- Read Lock(Shared Locked)
protects read access to an object. The read lock allows other transactions read access but not write access to
the locked area of the table
- Write Lock(exclusive lock)
protects write access to an object. The write lock allows other transactions neither read nor write access to
the locked area of the table.
- Enhanced write lock (exclusive lock without cumulating)
works like a write lock except that the enhanced write lock also protects from further accesses from the
same transaction.
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
You have to use these function module in your program.
check this link for example.
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
tables:vbak.
call function 'ENQUEUE_EZLOCK3'
exporting
mode_vbak = 'E'
mandt = sy-mandt
vbeln = vbak-vbeln
X_VBELN = ' '
_SCOPE = '2'
_WAIT = ' '
_COLLECT = ' '
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Normally ABAPers will create the Lock objects, because we know when to lock and how to lock and where to lock the Object then after completing our updations we unlock the Objects in the Tables
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
purpose: If multiple user try to access a database object, inconsistency may occer. To avoid that inconsistency and to let multiple user give the accessibility of the database objects the locking mechanism is used.
Steps: first we create a loc object in se11 . Suppose for a table mara. It will create two functional module.:
1. enque_lockobject
1. deque_lockobject
before updating any table first we lock the table by calling enque_lockobject fm and then after updating we release the lock by deque_lockobject.
Select the radio button "Lock object"..
Give the name starts with EZ or EY..
Example: EYTEST
Press Create button..
Give the short description..
Example: Lock object for table ZTABLE..
In the tables tab..Give the table name..
Example: ZTABLE
Save and generate..
Your lock object is now created..You can see the LOCK MODULES..
In the menu ..GOTO -> LOCK MODULES..There you can see the ENQUEUE and DEQUEUE function
Reward if helpful

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

HT4889 When I transferred my data from a 128GB Macbook Air to 256GB Macbook Air (brand new version as of 9/1/13) I end up with 188GB used! I add up the size of Users, System, Library and Applications and it comes to 90GB. What am I missing?

When I transferred my data from a 128GB Macbook Air to 256GB Macbook Air (brand new version as of 9/1/13) I end up with 188GB used! I add up the size of Users, System, Library and Applications and it comes to 90GB. What am I missing? How did I "use" up so much space in migrating from one Mac to another?

Did you use the Setup Assistant available at the beginning of the new machine's setup process? Or did you use Migration Assistant later after you had set up the new machine?
If you used Migration Assistant, you generally wind up with two accounts (the new one you set up on the new machine plus the old one you ported over) - that may explain your excessive use of space. In that case, you can either manually combine/remove all unnecessary duplicate files, or you can start over by using Command + R, wiping your drive, and downloading the OS. Once it's downloaded, use the Setup Assistant offered at the beginning of the install/setup process.

I was using osx 10.5.8 and upgraded to mavericks 10.9.4,after when restoring all my data from time machine ,the new mavericks os was replaced by the old OS 10.5.8 any solution

I was using osx 10.5.8 and upgraded to mavericks 10.9.4,after that ..when restoring all my data from time machine ,the new mavericks os was replaced by the old OS 10.5.8 ...any solution to get back to the upgraded mavericks OS????

Hi, how did you get MavX from 10.5.8, since it requires 10.6.8 to get MavX from Apple's App Store?

TS1538 My Ipod 160GB Classic Hung. I connected and restored to factory settings. But later when I connected the data from I Tunes is not syncing at all. Please guide

My Ipod 160GB Classic Hung. I connected and restored to factory settings. But later when I connected the data from I Tunes is not syncing at all. Please guide

This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.

How to transfer data from one system to another by datamart please give de

how to transfer data from one system to another by datamart please give details

Hi Deba,
Find the below SAP help doc which may help u...
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also find the below threads...
Loading data from one cube to another cube.
data copy from infocube to infocube in two different BW systems
Delta when loading from ODS to ODS
reg datamart
Data mart flag
Regards,
KK.

Sizing issue when pasting corner pin data from mocha ae onto a solid layer. Please help!!

Similar Messages

Maybe you are looking for