Sizing issues when viewing size with mobile device

I'm having issues with Muse resizing my website when used with a mobile device. It cuts off the left and right side for some reason and I'm not sure the reason.
Below is how it should look based normally. It's at a 1024x786 resolution
This is what it looks like on my iPhone 5 (note it cutting off the sides) -- Any help here would be GREATLY appreciated. Thanks guys!

The cause of that is because your content is lying beyond the left and right edge of the page in Muse. Please refer below screenshot.
Cheers,
Vikas

Similar Messages

How can I make my phone number active when viewing from a mobile device. My phone number is in my header in CSS

How can I make my phone number active when viewing from a mobile device. My phone number is in my header in CSS

See this support document http://support.apple.com/kb/HT5661

I have a fillable form that we send to contractors - when the form is opened on a computer the contractor can view the fields we have completed, however when viewing from a mobile device or cell phone those fields appear blank. Any suggestions? I am at a

when the form is opened on a computer the contractor can view the fields we have completed, however when viewing from a mobile device or cell phone those fields appear blank. Any suggestions? I am at a total loss as it works when viewing from the computer. I am assuming it is a setting or maybe we need to save it a special way?

What version of Reader are they using, exactly? And are you sure they're
using Reader itself and not opening the file inside a browser window, for
example?
On Fri, Feb 6, 2015 at 5:24 PM, jessicao96457206 <[email protected]>

Muse site does not allow photos to change with mobile device orientation i.e. they can't be seen as full images

I have a site that has images on it and when viewed on a mobile device (ipad, phone) look fine when in portrait mode, but when the device is rotated 90 degrees you can't see the whole image. Is there some setting/widget something I need to enable this?
Thanks

1- of course i know i have to accept the change, i just don't recall specifically whether or not iPhoto itself was one of the recent updates i accepted. lol
2-this is not true - a few years back, it was a 2 step process. Then it changed with one of the upgrades, and i have been able (as long as i selected 4x3 *book* as opposed to 4x3 *dvd*) to drag between orientations for the past few years - at LEAST 2 years, maybe as many as 4 (I lose track). I remember thinking at the time what a wonderful upgrade that was because it did away with all that needless clicking. Now all of a sudden this month, it has been switched off - am I the only one who has noticed this?
I have been creating an annual 'family photo album' book via iPhoto for several years now, and i use the 4x3 book sizing specifically for that reason, so I've got lots of experience using this setting. I *know* it used to work the other way.

ISE integration with Mobile Device Management ( MDM ) help required

Dear Techies,
     Am here bring to your notice an different issue and no much resources to support even in PEC or Cisco Document.
     We are conduction a Proof Of Concept (PoC) on Secure Bring Your Own Device ( BYOD ) using Cisco ISE and gonna test all the scenarios like Wired, Wireless and VPN user access.
Setup Brief :
=========
      Our Setup has ISE VM acting as Admin, Monitor and Profiling Device, we have NAC 3315 physical Appliance as Inline posture Device, Wireless LAN controller, Access point and the Identity source as Microsof Active Directory
     Having Plans to Integrate Mobile Device Management ( MDM ) and Citrix VDI setup also.
Activity Brief:
=========
     As of now we have tested the Wired Scenario Authentication and authorization for guest users and gonna carry out the profiling and posture.
Clarifications Required
================
Wired Scenario - Require some configuration / steps on how to carryout posture for the guest wired users i.e. LAPTOP.
Wireless Scenario
MDM can be integrated to ISE ?
How the MDM can be integrated to Cisco ISE configuration or Guide to show the same?
What is the demarcation between MDM and ISE ( i.e. What is the role of ISE and MDM on Mobile Devices ) ?
If MDM is available so then when the control of ISE ends, does MDM do management or ISE will do management of the devices ?
Is MDM will do client provisioning or ISE should do ?
Is MDM send or update patches of Mobile Devices ?
As of now these are the scenarios, kindly revert if any good documents to show this or share your expertise on the Integration Part.
Thanks for Reading...
Arun

I would like to avail your valuable inputs to understand on the Client provisioning part for the Mobile Devices/ Laptop. I understand from your reply that MDM integration is not available in the current release ISE 1.1 - That is correct.
Kindly let me know your views or any documents on the following scenarios with the current release in mind
1. User with Mobile devices connecting to Wireless ( both Employee and Guest ) , How the Flow differs for the Employee and Guest. How the client provisioning is done ( i.e. Like Posturing or Compliance Check ).
The posturing and compliance check is done based on the user authentication information (i.e. AD memberOf vs Guest user) combined with the users endpoint (windows, mac osx, or a mobile device), ISE then has a few decisions to make based on the authorization policies. For example, if a Domain User coming from a Windows 7 machine joins the network, then can either use the nac agent, or the web agent. Then you can scan for registry settings, file settings, program requirements, hotfix compliance...and the list goes on. If the user fails a check then you can either assign an acl for the user so they only have guest access, or you can place them into a remediation vlan the options are entirely up to the requirements and however the solution is implemented.
2. User with Laptop connecting to Wireless ( both Employee and Guest ). How the client provisioning is done ( i.e. Like Posturing   or Compliance Check ).
Guests are usually redirected to the guest portal which they authenticate and their user group falls within the Guest container that is on the ISE internal database, that is usually coupled with an authorization profile that grants them internet access. For the client provisioning, that is usually done based on the operating system, via profiling (dhcp, and user agent string., netmap...etc) and can be fine tuned for all laptops or to a specific set of users based on their group membership.
3. What are advantages of having ISE also in place for Mobile devices, since most of the Mobile related tasks ( like Authentication, Authorization, Profiling and Posture ) are carried out by MDM. I am checking for the significant advantage of having ISE for Client network having only Mobile devices. Kindly clarify.
Currently the advantage of Cisco ISE is that it supports profiling within wireless and really fits well within a network that has mostly Cisco products since they are all part of of the Borderless security initiative being driven on the backend. The product teams for wireless, wired, security (vpn..etc) and ISE are pretty close in building their solutions so that you can get connected with any device any where (sorry for the sales pitch). The latests wireless code is improving and is going to have support similar to the ios sensor for wired devices where dhcp, cdp, and other attributes can be sent in the radius packet for better profiling decisions. With integration for an MDM platform coming soon, and also support for TACACS rumored (have to verify with your account rep) you have options that really stand out from a unit that only supports MDM. Cisco ISE also comes with a wireless product ID so that makes the budget work when it comes to deploying ISE if you arent looking for enforcement on your wired devices.
4. Do you recommend 802.1X Authentication to use for the Employee and Contractor? The Guest user authentication as Open ?
For internal users and vendors the best option by far is dot1x, almost all operating systems are capable of performing dot1x and the 1.1.1 MR has a piece now that can provision the supplicant for the users, by using scep to enroll certificates or configure peap settings.
There is a feature within the guest portal that allows you to statically assign guests into endpoint group, that feature is called device registration web authentication. It seems like an open network but uses mac filtering to assign these devices to an endpoint without requiring users to enter any credentials. They are presented with an AUP page, once they accept their mac address is mapped to the endpoint group
5. How can we ensure the Encryption of traffic from the Guest user to the NAD ( Network Access devices ) ?
This may be a wireless question but I am sure the encryption is done using AES and using dot1x as the key management here is a brief background for this - http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807f42e9.shtml#L2
You can also use the anyconnect client which can provide macsec which is layer 2 encryption for wired - http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/qa_c67-622477_ns1049_Networking_Solutions_Q_and_A.html
6. We are also looking for VDI ( Citrix, VMware ) solution for the client ( both Employee and Guest ) , how ISE can play a role in securing the VDI environment.
For most thin clients you can perform dot1x authentication on the device itself, however that is something the manufacturer will have to support. This is a little gray for me.
7. Is that any integration required with Citrix or VMware. How the VDI can be offered based on the User role ( i.e. Employee, Contractor or Guest ), since Guest database is available only with ISE, how the checks are made from the VDI environment.
IN ISE there is an identity sequence which can authenticate users in AD first, if the user is not found then it can look in the internal database.
Our solution demands MDM in the integrated solution, As on today ISE cant be integrated with MDM. so what kind of solution we can propose to have MDM and Cisco ISE .Do the clients now enter the network should have already installed the MDM agent (or) any other way of pushing the same to the Client.
Today there is no integration between the devices, the last release time I heard was December for this feature. However it would be best to confirm with your Cisco Account rep on this issue.
Thanks,
Tarik Admani
*Please rate helpful posts*

SSLVPN 3rd Party Certificate, still get "untrusted site" with mobile device

Hi,
I have recently implemented an Entrust cert on my ASA for SSLVPN. When accessing the ASA from Windows/MAC, the "untrusted site" page does NOT appear. When accessing the ASA from an Android/iPhone, the "untrusted site" page DOES appear. Can anyone chime in on why this is happening with mobile devices?
Thanks,
Eric

Hi Portu,
I'm not clear with your last request, what are you asking?
I've looked at the security warning on an iPhone, and it reads the following:
"The site's security certificate is not trusted!
You attemped to reach blah.blah.com, but the server presented a certificate issued by an entity that is not trusted by your computer's operating system. This may mean that the server has generated is own security credentials, which Google Chrome cannot rely on for identity information, or an attacker may be trying to intercept your communications."
This does not happen when using Google Chrome on Windows/OSX.

HT1926 Installing iTunes 11.1.4 on windows XP issues warning message: Service "Apple Mobile Device' failed to start. starting iTunes shows MSVCR80.dll not found.

Normal update of iTunes to 11.1.4 fails. Suggests installing from web site
I install from iTunes.com. Install issues the messages:
Service "Apple Mobile Device' failed to start.
Verify that you have sufficient privileges to start system services
I do have necessary privilegs. I hit ignore. See window with successful install come up and finish with launch. I get the messages:
iTunes was not installed correctly.
Please reinstall iTunes
Error 7 (Windows error 126)
Tring to start iTunes from desktop gives:
This application failed to start because MSVCR80.dll was not found
Re-installing the application may fix the problem.
Further repair or remove/reinstall does not fix the problem (including after reboot)
Thie is the first time this has happened. I'm not sure where to go from here
Thanks for any help.

Earlier suggestion worked. That is, Use software add/remove to delete all 5 iTunes applications:
Apple Application Support
Apple Mobile Device Support
Aple Sortware Update
Bonjour
iTunes
Reboot and install/

How can i download old settings with firefox sync ? i formatted my computer thinking that the data will be restore on login , but it's only letting my sync firefox with mobile device , can someonr please help my ?

how can i download old settings with firefox sync ? i formatted my computer thinking that the data will be restore on login , but it's only letting my sync firefox with mobile device , can someonr please help my ?

'''Did you backup whatever bookmarks you did have on the computer ? '''
Remember any restoring of bookmarks overwrites whatever he current set is, and you may not want to loose them.
Even if up until now you have not made any backups of Desktop bookmarks Firefox will have backed up some of them into sets of daily bookmark backups. Once you have backed up your current set you could look at what it has by restoring those bookmarks, you may find one of those sets is fairly complete.
By the way if you look at the profile files and folders that you should now have on the desktop you should see it contains a bookmarks backup folder, the size of the files within should indicate whether they contain anything.
You need to go into the bookmarks library and try the restore option. Backup each set that you look at if it has anything of use in it, before trying the next set. With look one of those will be a fairly complete set of bookmarks.
* USE '''Show All Bookmarks -> Import and Backup -> Restore '''
** see [[Restore bookmarks from backup or move them to another computer#w_restoring-from-backups]]_restoring-from-backups
I do not use Firefox on mobiles, but before you try anything further you do need to backup the desktop bookmarks and learn what existing backups you have. Unless you master that you are in continual danger of overwriting and loosing bookmarks.
Presumably you have already found this listing of help articles for mobiles
* [/products/mobile/bookmarks]

Need to share calendars with mobile devices - support ical

Looking to setup sharepoint calendars with mobile devices. How would I setup Ical for sharepoint?
thanks
Dave
Dave Kozlowski

Hi Dave,
According to your description, my understanding is that you want to make the calendars in SharePoint can be viewed in iCalendar format in the mobile devices.
To make the SharePoint calendars be viewed in iCalendar format and then you can sync your iPhone with the calendar , you can use the
MashPoint REST API. Please refer to the link below:
http://community.bamboosolutions.com/blogs/mashpoint/archive/2010/10/07/how-to-synch-your-iphone-ipad-with-a-sharepoint-calendar.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Permission issue with Mobile Device

Hi,
I am trying to access my Moto G (2nd Gen) mobile device from my machine and have problem in accessing it.
I am getting error saying MTP USB Device : You do not have permission to access the device.
I am administrator of the machine... I am do not able to identify the issue why it was occuring, but the same is working fine in my friend machine. When I cheked the event log, I could see some error....
Source: WPD-ClassInstaller
Event ID: 25089
Task Category : Driver Migration
It was not possible to access the device (\\?\usb#vid_22b8&pid_2e82#zx1d624683#{10497b1b-ba51-44e5-8318-a65c837b6661}) after installing drivers. Error code 0x80070005.
Can anyone help????

Hi,
This error means no permission.
Please try to uninstall Mobile Device USB Driver frm device manger, scan the hardware changes for driver installation and thn check it again.
Also follow the suggestions in this article to check this issue:
"Windows cannot access the specified device, path, or file" error when you try to install, update or start a program or file
http://support.microsoft.com/kb/2669244/en-us
Also, I would like you to contact the manufacturer's of your mobile device to see if there is any button or settings on this device to block accessing behavior.
Kate Li
TechNet Community Support

Strange quality issues when saving for web and devices.

Im a UI designer and spend lots of time working with illustrator and photohop. When I design I normally create vector mockps of my work and then export slices using artboards and save for web and devices. Yesterday Illustrator started having problems exporting files. The files look good on my computer, when viewed with pixel preview mode but when i export they look really bad. here is an example:
This is a screen shot of a part of a mobile app im working on at 100 % and 200 %
here is the same area when exported using "save for web and devices" at 100% and 200%:
as you can see there is a dramatic loss in quality. the icons look almost like a low color gif...
Here is what I have tried already:
I have tried changing the settings in the exporter. I normally use png 24 but I have tried all the different settings and they all do about the same thing. the only one that seems to look ok are swf and svg.
I have copied my files over to photoshop and exported from there. that works fine but it is a pain.
any help would be great.
Eli
www.elilang.com

Here is a screen shot with transparence off and art optimized... still not working.

Searching mailbox with mobile device

Hi.
A user is trying to search his mailbox with his mobile device. The phone is configured to only sync 3 days back so he "continues" the search on the server with the phone. The problem is that the phone only finds content which is 2 months old or
newer.
I must add that earlier today he reported that search with Outlook in online mode didn't work either, so I deleted the index on the server and it then rebuild itself. Outlook search now wit actually also was healthy (the status showed healthy) before
I deleted it but for some reason it didn't work.
So the Outlook problem is fixed but the phone search still doesn't Work. Anyone know if active sync uses the exact same index as Outlook in online mode does? Or does active sync hold som cached search info or does it seach in some other way?
Best Regards
Thomas

There is an option on the mobile device to continue search on server, so your statement that it only shows hits for what's been synced is not true.
But further testing in Outlook shows me that there is something wrong with the indexing on the server. The database tells me that the index is healthy, but when I delete the index and let the server create a new one, the size changes for the new
index. Not a few MB but 1.5GB... this tells me that something is not quite right with the indexing of the database.
Also a funny thing is that when I search for the same keywords in subject on an Android device and an Ios device, the oldest thing I find on the Ios device is actually older than the oldest thing I find on the Android device. So there
seems to be a limit in how old the items searched with the Android device (Sony deivce) can be......at least that's what my testing shows. Even when the search is done on the server via the mobile device.
So I think I can conclude to Things. Mobile devices uses different limits on age, even when using the server index and there must be something wrong wit the indexing of the database, even though the database tells me that the indexing is healthy.

What is happening with iCloud and its sync with mobile devices?

I have been an Apple fan for 4 years now. I currently have 4 Macs (2 @ 27" and 2 @ 21.5" models), 2 iphones (4s and 3gs) and an iPad (2). I use them all for business and personal use.
Prior to purchasing my iPhone 4s on release day in the UK I was also a fully signed up Mobileme family account user. Everything worked fine. When I purchased my iPhone 4s I switched everything from Mobileme over to iCloud. Followed all the instructions. Initially it seemed to work fine. But over the last few weeks it has all gone horribly wrong resulting in the following; amongst other problems:
iPhone 4s
My iphone 4s will no longer sync mail, contacts and calendar effectively. Mail will sync new mail in my inbox but I cant send any mail and when I do draft a mail and send it dissappears from the outbox, sent box and inbox (i always bcc mail). The number of contacts is a fraction of the number of contacts in my contracts file on my main Mac. Calendar will not let me sync or add any new entries...let alone sync with iCal on the Mac.
iPad 2
My iPad suffers from much of the same problems as my iPhone. When I go to settings on the iPad and go to Mail, contacts and calendar, the iPad just freezes. I then have to hard re-set to get it working again.
iPhone 3gs
I used this before I upgraded to the 4s. It suffers with the same problems as my 4s described above.
iCloud.com
The number of contacts on iCloud.com is fixed at 1625no; whereas my Mac has a clean set of contacts containing 1325no. When I try to delete contacts on iCloud.com it says I cant because of a server error. Mail and Calendar both seem to work fine though.
I am now left with a major business critical problem. Niether iCloud.com, my Mac or my mobile devices will sync with each other. Apple has excalated the problem and my iCloud account is currently being tested. In the meantime my Mac contacts has duplicated and increased upwards of 4,000 contacts.
This whole journey of bad expereince is driving me insane and making my love of all things Apple wain.
I have restored my mobile devices about 8-9 times each. I have restored from previous versions stored on iTunes and also set them up as new devices....which as any of you will know is a laborious process because you have to reconfigure the Apps icons each time you do this as a new device! None of my attempts have fixed the situation.
Are we or have we been used by Apple as guinea pigs to test the iCloud which, according to the communities and discussions on this site, leaves a lot to be desired. This is having a dramatic affect on my quality of life and business.
Please help me.....
Mark

For the most part if you just get a new webhost you can continue to run with iWeb. Since you are still running Tiger iWeb should work just fine for you. You will simply need to publish your website to a folder or with the built in FTP in iWeb. Apple has simply quit updating iWeb & there will come a day when iWeb quits working in the later OS's whatever kitty comes after Lion.
Here's a link to who I use for Hosting:
http://jeffnitschke.com/wordpress/?p=84

Viewing PDF in mobile devices

If you create a Pdf using Indesign, import into Acrobat Pro and add text etc.....if you then save the Pdf to email to customers, the text entered using Acrobat Pro does not show in mobile devices!

Thanks for your reply....not sure how to upload a file....it's a very simple Pdf, viewed on a laptop or desktop there's no problem, only mobile devices.
Everything done with Indesign is fine, only some minor text entered using Acrobat does not show.
Bernd Alheit wrote:
Can you post a link to a sample document?

IDcs3 export PDF issues when viewing in Preview

I appear to be having issues when exporting PDFs from IDcs3. I have drop shadows on text and objects. When i export as a PDF and view it in 'Preview', I get a shadow that extends the area of the object. Drop shadows are not defined, they just have a block blur effect.
The thing is when I transfer the file over to my MS machine, Acrobat displays the PDF perfectly. Is this a problem with Preview or is it something to do with the export PDF settings.
Cheers

Preview is not capable of handling the advance features of exported PDFs.
Bob

Sizing issues when viewing size with mobile device

Similar Messages

Maybe you are looking for