Sizing issues with macbook
Hi,
I've got a Macbook with os 10.4.11 and two problems re: sizing.
1st-I can't get it to print the full size on my canon mp830 printer. It reduces to about a third of the size and moves to the top left corner. I've tried everything I can think of to no avail. My wife has the exact same computer and hers works fine.
2nd-I can't reduce the size of photo's from iphoto and move them to my hotmail account. They are huge. Again, I've tried everything I can think of and it doesn't work.
I've posted these Q's before and tried what was suggested, but they didn't work.
Any other ideas would be greatly appreciated.
Thank you
1) Go here: Macintosh HD > Users > YOURUSERNAME > Library > Preferences and delete the following files:
com.apple.print.add.plist
com.apple.custompresets.plist
com.apple.print.printerproxy.plist
com.apple.print.printingprefs.plist
Don't worry if all 4 files aren't there, just delete the ones that are.
2) Go to System Preferences > Printers and remove your Cannon printer completely. Delete the whole thing. Then, restart your computer and re-add the printer by returning to System Preferences > printers.
3) As for iPhoto, when you want to email a photo, choose "Email" from the bottom of iPhoto. A box pops up that asks you what size you want to send the photo as. Choose from small, medium, or large.
Similar Messages
-
Keyboard/Trackpad issues with MacBook Air (Late 2010)
My wife used one of those clorox wipes on her MacBook Air and now she is having issues with the keyboard and trackpad. The option, command and shift keys do not work correctly and the trackpad thinks every click is a two finger "command click" (even though I turned off right clicking in the system preferences).
Normally I would try a PRAM or SMC reset to fix it, but the buttons needed to start one (cmd + opt) aren't working.
I plugged in an external USB keyboard and all the buttons work correctly.
Any advice on how to get these issues resolved? Is it a hardware issue that needs to be addressed by a Genius? Is it possible a clean install of OS X could fix the issue?
The computer hasn't had any issues before this and there doesn't appear to be any battery swelling issuesI made a Genius bar appointment for tomorrow. When I got home last night I took a look at it again (I have a hard time leaving broken things alone...) and for whatever reason, the keyboard started working perfectly again. I managed to boot into safe mode via terminal but the issue persisted. When I booted back into standard mode, the keyboard was working great. This morning when I woke up, it was not working agian, but after rebooting it, it has been working correctly for the last hour.
At one point, I booted into Recovery and looked at the system.log. One error that caught my eye was:
Keyboard Layouts: duplicate keyboard layout identifier -16900.
Mar 7 05:54:10 localhost Unknown[355]: Keyboard Layouts: keyboard layout identifier -16900 has been replaced with -28674.
Any idea what this is, or if it could be causing eratic behavior?
The other odd thing is I cannot boot into any disgnostic modes using shortcut keys before booting. I'd like to reset PRAM, run AHT but none of those commands are working.
I still have my appointment tomorrow, but I'm thinking it is not a hardware issue (with the keyboard at least) since it does work correctly some of the time. -
After several repairs, still having heating issue with MacBook Pro (mid '09)
EDIT: this post got removed the first time for not being constructive enough. I've now edited the post.
This is going to be a lengthy post, so bear with me.
2 months ago, I suddenly noticed my MacBook Pro (medio 2009, 15", 4GB RAM, GeForce 9400M) heating up a lot harder than usual. I'm familiar with the heating issues these laptops have, but this wasn't normal. Looking at iStat Pro, I saw my fans almost taking off like an airplane at 5700 rpm, while watching only a livestream on my browser. I know Shockwave Flash takes up quite a chunk of your CPU, but I had never encountered this problem beforehand.
The biggest problem wasn't just the heat or the fans, but the fact that my computer also started reacting rather slowly. Sometimes I'd even get beachballed, or the whole browser stopped responding for half a minute...
So I tried to see if gaming was still an option. Of course not. I had been playing League of Legends for several months without any issues. Whilst playing, I'd kick up my fans manually to about 4000 rpm, and they'd stay there throughout the whole game. Now, when I start up the game, it plays smoothly for the first 2 minutes. After the temperatures rise to a critical level, the fans start spinning up to 5700 rpm, and the whole game plays like a powerpoint presentation.
On a sidenote: it sort of 'lags' every 1-2 seconds, and sometimes, after a long period, the game acts somewhat normal again (20 mins). This game uses wine to run, which isn't the most optimal way. So I tried playing Team Fortress 2, too. Probably even worse results! (but again noticeable 1-2 second interval lags)
Before anyone starts screaming: "Don't use your Mac for gaming!" etc., I wish to point out that these two games had been running perfectly for the past few months/years. Something's definitely wrong.
After looking for some solutions myself, I decided to go to an authorized Apple Service in my city. A few days later, they told me my logic board was broken, and I had to pay almost 700 euros ($ 900-1000) to replace it. So I did. I got it back, but it wasn't fixed. Brought it back in. Got it back a week later: "Your new logic board we got from Apple was already broken, but we hadn't noticed. We put a new one in it. It's fixed." Again, same problem.
We're almost 2 months later and 700 euros poorer, still no result. I've brought it in about 6-7 times now, here's a list of what they've tried so far:
- In total 3 new logic boards
- New MagSafe (because they discovered it was giving too much power too my laptop)
- Fresh re-install
- Replaced RAM
- Checked fans etc. (they do this by default)
- A few tests which proved that it was repaired (but I have my doubts with these tests...)
They told me now that it's fixed, and they basically won't look into it anymore. I must contact Apple myself, if I wasn't satisfied. The tests they performed showed no signs of heating issues. (One of the tests was playing 4 1080p movies at the same time. When I watch a 1080p movie on Youtube, my laptop is taking off like a plane) They ran a stress test all night long, showing no temperatures above 98°C. I got it up to 105°C in a few minutes according to iStat Pro.
They advised me to install Mountain Lion, which would make the issues with "high-performance sites" go away. I haven't seen much improvement, though.
This whole experience has been quite frustrating, especially now that I'm gonna need my laptop for University again. Isn't there anything I can do? I've paid almost 700 euros and missed my laptop for 2 months, without any results.
I've got more information regarding the issues if needed, ask away. I'm getting desperate.
I've been browsing around the support communites, and found that a lot of people are having issues since they upgraded to OS X Lion. Could this be the case? Should I try downgrading to Snow Leopard?
I've also found a few topics on refreshing the cooling pasta on the heatsink. Would they have noticed any problems with this after replacing the Logic Board several times? Or should I check it myself? I'm not too keen on opening up my laptop myself...
Nick.Thought of buying Parallels? Fusion?
Might want to see if this gets moved to the MacBook Pro forum.
I'd think Windows 8.1 is smart enough (what I use 90% time since the Dev Preview came out couple yrs ago it seems like) to find the driver. -
Issue with MacBook Air and nouveau
Hi.
I've installed Arch Linux on MacBook Air with Nvidia 320M videocard. Proprietary nvidia driver does not work at all and nouveau has video artefacts (photo attached because screenshot pictures haven't any problems): horizontal noisy black lines and wrong colors on the left two thirds of screen.
/var/log/Xorg.0.log
[ 4.374]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 4.374]
X.Org X Server 1.11.99.903 (1.12.0 RC 3)
Release Date: 2012-02-11
[ 4.374] X Protocol Version 11, Revision 0
[ 4.374] Build Operating System: Linux 3.2.6-2-ARCH x86_64
[ 4.374] Current Operating System: Linux nikimac 3.2.6-2-ARCH #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012 x86_64
[ 4.374] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/disk/by-uuid/639277e8-a2f3-4313-b3e6-81eeb1453e85 ro init=/bin/systemd quiet
[ 4.374] Build Date: 18 February 2012 05:06:59PM
[ 4.374]
[ 4.374] Current version of pixman: 0.24.4
[ 4.374] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.374] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.374] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 21 16:55:39 2012
[ 4.380] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.382] (==) No Layout section. Using the first Screen section.
[ 4.382] (==) No screen section available. Using defaults.
[ 4.382] (**) |-->Screen "Default Screen Section" (0)
[ 4.382] (**) | |-->Monitor "<default monitor>"
[ 4.382] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.382] (==) Automatically adding devices
[ 4.382] (==) Automatically enabling devices
[ 4.392] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4.393] Entry deleted from font path.
[ 4.402] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4.402] Entry deleted from font path.
[ 4.402] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4.402] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4.402] Entry deleted from font path.
[ 4.402] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4.402] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 4.402] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.402] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.402] (II) Loader magic: 0x7cf1e0
[ 4.402] (II) Module ABI versions:
[ 4.402] X.Org ANSI C Emulation: 0.4
[ 4.402] X.Org Video Driver: 12.0
[ 4.402] X.Org XInput driver : 16.0
[ 4.402] X.Org Server Extension : 6.0
[ 4.404] (--) PCI:*(0:2:0:0) 10de:08a3:106b:00d3 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00001000/128, BIOS @ 0x????????/131072
[ 4.404] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4.404] (II) LoadModule: "extmod"
[ 4.414] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 4.415] (II) Module extmod: vendor="X.Org Foundation"
[ 4.415] compiled for 1.11.99.903, module version = 1.0.0
[ 4.415] Module class: X.Org Server Extension
[ 4.415] ABI class: X.Org Server Extension, version 6.0
[ 4.415] (II) Loading extension MIT-SCREEN-SAVER
[ 4.415] (II) Loading extension XFree86-VidModeExtension
[ 4.415] (II) Loading extension XFree86-DGA
[ 4.415] (II) Loading extension DPMS
[ 4.415] (II) Loading extension XVideo
[ 4.415] (II) Loading extension XVideo-MotionCompensation
[ 4.415] (II) Loading extension X-Resource
[ 4.415] (II) LoadModule: "dbe"
[ 4.415] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 4.416] (II) Module dbe: vendor="X.Org Foundation"
[ 4.416] compiled for 1.11.99.903, module version = 1.0.0
[ 4.416] Module class: X.Org Server Extension
[ 4.416] ABI class: X.Org Server Extension, version 6.0
[ 4.416] (II) Loading extension DOUBLE-BUFFER
[ 4.416] (II) LoadModule: "glx"
[ 4.416] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.419] (II) Module glx: vendor="X.Org Foundation"
[ 4.419] compiled for 1.11.99.903, module version = 1.0.0
[ 4.419] ABI class: X.Org Server Extension, version 6.0
[ 4.419] (==) AIGLX enabled
[ 4.419] (II) Loading extension GLX
[ 4.420] (II) LoadModule: "record"
[ 4.420] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 4.420] (II) Module record: vendor="X.Org Foundation"
[ 4.420] compiled for 1.11.99.903, module version = 1.13.0
[ 4.420] Module class: X.Org Server Extension
[ 4.420] ABI class: X.Org Server Extension, version 6.0
[ 4.420] (II) Loading extension RECORD
[ 4.420] (II) LoadModule: "dri"
[ 4.421] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 4.422] (II) Module dri: vendor="X.Org Foundation"
[ 4.422] compiled for 1.11.99.903, module version = 1.0.0
[ 4.422] ABI class: X.Org Server Extension, version 6.0
[ 4.422] (II) Loading extension XFree86-DRI
[ 4.422] (II) LoadModule: "dri2"
[ 4.423] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 4.425] (II) Module dri2: vendor="X.Org Foundation"
[ 4.425] compiled for 1.11.99.903, module version = 1.2.0
[ 4.425] ABI class: X.Org Server Extension, version 6.0
[ 4.425] (II) Loading extension DRI2
[ 4.425] (==) Matched nouveau as autoconfigured driver 0
[ 4.425] (==) Matched nvidia as autoconfigured driver 1
[ 4.425] (==) Matched nv as autoconfigured driver 2
[ 4.425] (==) Matched vesa as autoconfigured driver 3
[ 4.425] (==) Matched fbdev as autoconfigured driver 4
[ 4.425] (==) Assigned the driver to the xf86ConfigLayout
[ 4.425] (II) LoadModule: "nouveau"
[ 4.425] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 4.429] (II) Module nouveau: vendor="X.Org Foundation"
[ 4.429] compiled for 1.11.99.902, module version = 0.0.16
[ 4.429] Module class: X.Org Video Driver
[ 4.429] ABI class: X.Org Video Driver, version 12.0
[ 4.429] (II) LoadModule: "nvidia"
[ 4.429] (WW) Warning, couldn't open module nvidia
[ 4.429] (II) UnloadModule: "nvidia"
[ 4.429] (II) Unloading nvidia
[ 4.429] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 4.429] (II) LoadModule: "nv"
[ 4.429] (WW) Warning, couldn't open module nv
[ 4.429] (II) UnloadModule: "nv"
[ 4.429] (II) Unloading nv
[ 4.429] (EE) Failed to load module "nv" (module does not exist, 0)
[ 4.429] (II) LoadModule: "vesa"
[ 4.429] (WW) Warning, couldn't open module vesa
[ 4.429] (II) UnloadModule: "vesa"
[ 4.429] (II) Unloading vesa
[ 4.429] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4.430] (II) LoadModule: "fbdev"
[ 4.430] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 4.431] (II) Module fbdev: vendor="X.Org Foundation"
[ 4.431] compiled for 1.11.99.903, module version = 0.4.2
[ 4.431] ABI class: X.Org Video Driver, version 12.0
[ 4.431] (II) NOUVEAU driver
[ 4.431] (II) NOUVEAU driver for NVIDIA chipset families :
[ 4.431] RIVA TNT (NV04)
[ 4.431] RIVA TNT2 (NV05)
[ 4.431] GeForce 256 (NV10)
[ 4.431] GeForce 2 (NV11, NV15)
[ 4.431] GeForce 4MX (NV17, NV18)
[ 4.431] GeForce 3 (NV20)
[ 4.431] GeForce 4Ti (NV25, NV28)
[ 4.431] GeForce FX (NV3x)
[ 4.431] GeForce 6 (NV4x)
[ 4.432] GeForce 7 (G7x)
[ 4.432] GeForce 8 (G8x)
[ 4.432] GeForce GTX 200 (NVA0)
[ 4.432] GeForce GTX 400 (NVC0)
[ 4.432] (II) FBDEV: driver for framebuffer: fbdev
[ 4.432] (++) using VT number 7
[ 4.437] drmOpenDevice: node name is /dev/dri/card0
[ 5.343] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
[ 5.343] drmOpenDevice: node name is /dev/dri/card0
[ 5.343] drmOpenDevice: open result is 7, (OK)
[ 5.343] drmOpenByBusid: drmOpenMinor returns 7
[ 5.343] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
[ 5.343] (II) [drm] nouveau interface version: 0.0.16
[ 5.343] (WW) Falling back to old probe method for fbdev
[ 5.343] (II) Loading sub module "fbdevhw"
[ 5.343] (II) LoadModule: "fbdevhw"
[ 5.343] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 5.344] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 5.344] compiled for 1.11.99.903, module version = 0.0.2
[ 5.344] ABI class: X.Org Video Driver, version 12.0
[ 5.344] (II) Loading sub module "dri"
[ 5.344] (II) LoadModule: "dri"
[ 5.344] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 5.344] (II) Module dri: vendor="X.Org Foundation"
[ 5.344] compiled for 1.11.99.903, module version = 1.0.0
[ 5.344] ABI class: X.Org Server Extension, version 6.0
[ 5.344] (II) NOUVEAU(0): Loaded DRI module
[ 5.344] drmOpenDevice: node name is /dev/dri/card0
[ 5.344] drmOpenDevice: open result is 8, (OK)
[ 5.344] drmOpenDevice: node name is /dev/dri/card0
[ 5.344] drmOpenDevice: open result is 8, (OK)
[ 5.344] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
[ 5.344] drmOpenDevice: node name is /dev/dri/card0
[ 5.344] drmOpenDevice: open result is 8, (OK)
[ 5.344] drmOpenByBusid: drmOpenMinor returns 8
[ 5.344] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
[ 5.344] (II) [drm] DRM interface version 1.4
[ 5.344] (II) [drm] DRM open master succeeded.
[ 5.344] (--) NOUVEAU(0): Chipset: "NVIDIA NVaf"
[ 5.344] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.344] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 5.344] (==) NOUVEAU(0): RGB weight 888
[ 5.344] (==) NOUVEAU(0): Default visual is TrueColor
[ 5.344] (==) NOUVEAU(0): Using HW cursor
[ 5.344] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 5.345] (==) NOUVEAU(0): Page flipping enabled
[ 5.379] (II) NOUVEAU(0): Output eDP-1 has no monitor section
[ 5.540] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 5.559] (II) NOUVEAU(0): EDID for output eDP-1
[ 5.559] (II) NOUVEAU(0): Manufacturer: APP Model: 9cdf Serial#: 0
[ 5.559] (II) NOUVEAU(0): Year: 2010 Week: 35
[ 5.559] (II) NOUVEAU(0): EDID Version: 1.3
[ 5.559] (II) NOUVEAU(0): Digital Display Input
[ 5.559] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 29 vert.: 18
[ 5.559] (II) NOUVEAU(0): Gamma: 2.20
[ 5.559] (II) NOUVEAU(0): No DPMS capabilities specified
[ 5.559] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 5.559] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 5.559] (II) NOUVEAU(0): redX: 0.593 redY: 0.342 greenX: 0.331 greenY: 0.573
[ 5.559] (II) NOUVEAU(0): blueX: 0.152 blueY: 0.133 whiteX: 0.313 whiteY: 0.329
[ 5.559] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 5.559] (II) NOUVEAU(0): Supported detailed timing:
[ 5.559] (II) NOUVEAU(0): clock: 91.5 MHz Image Size: 286 x 179 mm
[ 5.559] (II) NOUVEAU(0): h_active: 1440 h_sync: 1504 h_sync_end 1546 h_blank_end 1652 h_border: 0
[ 5.559] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
[ 5.559] (II) NOUVEAU(0): Unknown vendor-specific block 1
[ 5.559] (II) NOUVEAU(0): LP133WP1-TPA1
[ 5.559] (II) NOUVEAU(0): Monitor name: Color LCD
[ 5.559] (II) NOUVEAU(0): EDID (in hex):
[ 5.559] (II) NOUVEAU(0): 00ffffffffffff000610df9c00000000
[ 5.559] (II) NOUVEAU(0): 23140103801d12780aef059757549227
[ 5.559] (II) NOUVEAU(0): 22505400000001010101010101010101
[ 5.559] (II) NOUVEAU(0): 010101010101c223a0d450841a30402a
[ 5.559] (II) NOUVEAU(0): 36001eb3100000180000000100061030
[ 5.559] (II) NOUVEAU(0): 00000000000000000a20000000fe004c
[ 5.559] (II) NOUVEAU(0): 503133335750312d54504131000000fc
[ 5.559] (II) NOUVEAU(0): 00436f6c6f72204c43440a202020001f
[ 5.559] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 5.559] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 5.559] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 5.559] (II) NOUVEAU(0): Printing probed modes for output eDP-1
[ 5.559] (II) NOUVEAU(0): Modeline "1440x900"x59.8 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 5.559] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 5.559] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 5.559] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 5.560] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 5.560] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 5.560] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 5.560] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 5.720] (II) NOUVEAU(0): EDID for output DP-1
[ 5.720] (II) NOUVEAU(0): Output eDP-1 connected
[ 5.720] (II) NOUVEAU(0): Output DP-1 disconnected
[ 5.720] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 5.720] (II) NOUVEAU(0): Output eDP-1 using initial mode 1440x900
[ 5.720] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 5.720] (--) NOUVEAU(0): Virtual size is 1440x900 (pitch 0)
[ 5.720] (**) NOUVEAU(0): Driver mode "1440x900": 91.5 MHz (scaled from 0.0 MHz), 55.4 kHz, 59.8 Hz
[ 5.720] (II) NOUVEAU(0): Modeline "1440x900"x59.8 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 5.720] (**) NOUVEAU(0): Driver mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz
[ 5.720] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 5.720] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 5.720] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 5.720] (**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[ 5.720] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 5.720] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[ 5.720] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 5.720] (**) NOUVEAU(0): Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[ 5.720] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 5.720] (**) NOUVEAU(0): Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[ 5.720] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 5.720] (**) NOUVEAU(0): Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[ 5.720] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 5.720] (**) NOUVEAU(0): Display dimensions: (290, 180) mm
[ 5.720] (**) NOUVEAU(0): DPI set to (126, 127)
[ 5.720] (II) Loading sub module "fb"
[ 5.720] (II) LoadModule: "fb"
[ 5.720] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.721] (II) Module fb: vendor="X.Org Foundation"
[ 5.721] compiled for 1.11.99.903, module version = 1.0.0
[ 5.721] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.721] (II) Loading sub module "exa"
[ 5.721] (II) LoadModule: "exa"
[ 5.722] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 5.722] (II) Module exa: vendor="X.Org Foundation"
[ 5.722] compiled for 1.11.99.903, module version = 2.5.0
[ 5.722] ABI class: X.Org Video Driver, version 12.0
[ 5.722] (II) Loading sub module "shadowfb"
[ 5.722] (II) LoadModule: "shadowfb"
[ 5.722] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 5.723] (II) Module shadowfb: vendor="X.Org Foundation"
[ 5.723] compiled for 1.11.99.903, module version = 1.0.0
[ 5.723] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.723] (II) UnloadModule: "fbdev"
[ 5.723] (II) Unloading fbdev
[ 5.723] (II) UnloadSubModule: "fbdevhw"
[ 5.723] (II) Unloading fbdevhw
[ 5.723] (--) Depth 24 pixmap format is 32 bpp
[ 5.728] (II) NOUVEAU(0): Opened GPU channel 2
[ 5.728] (II) NOUVEAU(0): [DRI2] Setup complete
[ 5.728] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 5.728] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 5.729] (II) NOUVEAU(0): GART: 64MiB available
[ 5.736] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[ 5.738] (II) EXA(0): Driver allocated offscreen pixmaps
[ 5.738] (II) EXA(0): Driver registered support for the following operations:
[ 5.738] (II) Solid
[ 5.738] (II) Copy
[ 5.738] (II) Composite (RENDER acceleration)
[ 5.738] (II) UploadToScreen
[ 5.738] (II) DownloadFromScreen
[ 5.738] (==) NOUVEAU(0): Backing store disabled
[ 5.738] (==) NOUVEAU(0): Silken mouse enabled
[ 5.738] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 5.738] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 5.738] (==) NOUVEAU(0): DPMS enabled
[ 5.738] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5.738] (--) RandR disabled
[ 5.738] (II) Initializing built-in extension Generic Event Extension
[ 5.738] (II) Initializing built-in extension SHAPE
[ 5.738] (II) Initializing built-in extension MIT-SHM
[ 5.738] (II) Initializing built-in extension XInputExtension
[ 5.738] (II) Initializing built-in extension XTEST
[ 5.738] (II) Initializing built-in extension BIG-REQUESTS
[ 5.738] (II) Initializing built-in extension SYNC
[ 5.738] (II) Initializing built-in extension XKEYBOARD
[ 5.738] (II) Initializing built-in extension XC-MISC
[ 5.738] (II) Initializing built-in extension SECURITY
[ 5.738] (II) Initializing built-in extension XINERAMA
[ 5.738] (II) Initializing built-in extension XFIXES
[ 5.738] (II) Initializing built-in extension RENDER
[ 5.738] (II) Initializing built-in extension RANDR
[ 5.738] (II) Initializing built-in extension COMPOSITE
[ 5.738] (II) Initializing built-in extension DAMAGE
[ 5.799] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 5.799] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 5.799] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 5.799] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 5.800] (II) AIGLX: Loaded and initialized nouveau
[ 5.800] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5.805] (II) NOUVEAU(0): NVEnterVT is called.
[ 6.217] (II) NOUVEAU(0): Setting screen physical size to 381 x 238
[ 6.217] resize called 1440 900
[ 6.272] (II) XKB: Reusing cached keymap
[ 6.274] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 6.274] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.274] (II) LoadModule: "evdev"
[ 6.274] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.275] (II) Module evdev: vendor="X.Org Foundation"
[ 6.275] compiled for 1.11.99.902, module version = 2.6.99
[ 6.275] Module class: X.Org XInput Driver
[ 6.275] ABI class: X.Org XInput driver, version 16.0
[ 6.275] (II) Using input driver 'evdev' for 'Power Button'
[ 6.275] Option "XkbRules" "evdev"
[ 6.275] Option "XkbModel" "evdev"
[ 6.275] Option "XkbLayout" "us"
[ 6.275] Option "_source" "server/udev"
[ 6.275] Option "name" "Power Button"
[ 6.275] Option "path" "/dev/input/event3"
[ 6.275] Option "device" "/dev/input/event3"
[ 6.275] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 6.275] Option "driver" "evdev"
[ 6.275] (**) Power Button: always reports core events
[ 6.275] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 6.275] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.275] (--) evdev: Power Button: Found keys
[ 6.275] (II) evdev: Power Button: Configuring as keyboard
[ 6.275] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 6.275] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 6.275] (**) Option "xkb_rules" "evdev"
[ 6.275] (**) Option "xkb_model" "evdev"
[ 6.275] (**) Option "xkb_layout" "us"
[ 6.301] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 6.301] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 6.301] (II) Using input driver 'evdev' for 'Video Bus'
[ 6.301] Option "XkbRules" "evdev"
[ 6.301] Option "XkbModel" "evdev"
[ 6.301] Option "XkbLayout" "us"
[ 6.301] Option "_source" "server/udev"
[ 6.301] Option "name" "Video Bus"
[ 6.301] Option "path" "/dev/input/event4"
[ 6.301] Option "device" "/dev/input/event4"
[ 6.301] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input4/event4"
[ 6.301] Option "driver" "evdev"
[ 6.301] (**) Video Bus: always reports core events
[ 6.301] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 6.301] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 6.301] (--) evdev: Video Bus: Found keys
[ 6.301] (II) evdev: Video Bus: Configuring as keyboard
[ 6.301] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input4/event4"
[ 6.301] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 6.301] (**) Option "xkb_rules" "evdev"
[ 6.301] (**) Option "xkb_model" "evdev"
[ 6.301] (**) Option "xkb_layout" "us"
[ 6.301] (II) XKB: Reusing cached keymap
[ 6.301] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 6.302] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.302] (II) Using input driver 'evdev' for 'Power Button'
[ 6.302] Option "XkbRules" "evdev"
[ 6.302] Option "XkbModel" "evdev"
[ 6.302] Option "XkbLayout" "us"
[ 6.302] Option "_source" "server/udev"
[ 6.302] Option "name" "Power Button"
[ 6.302] Option "path" "/dev/input/event1"
[ 6.302] Option "device" "/dev/input/event1"
[ 6.302] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 6.302] Option "driver" "evdev"
[ 6.302] (**) Power Button: always reports core events
[ 6.302] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 6.302] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.302] (--) evdev: Power Button: Found keys
[ 6.302] (II) evdev: Power Button: Configuring as keyboard
[ 6.302] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 6.302] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 6.302] (**) Option "xkb_rules" "evdev"
[ 6.302] (**) Option "xkb_model" "evdev"
[ 6.302] (**) Option "xkb_layout" "us"
[ 6.302] (II) XKB: Reusing cached keymap
[ 6.302] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 6.302] (II) No input driver specified, ignoring this device.
[ 6.302] (II) This device may have been added with another device file.
[ 6.302] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 6.302] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 6.302] (II) Using input driver 'evdev' for 'Sleep Button'
[ 6.302] Option "XkbRules" "evdev"
[ 6.303] Option "XkbModel" "evdev"
[ 6.303] Option "XkbLayout" "us"
[ 6.303] Option "_source" "server/udev"
[ 6.303] Option "name" "Sleep Button"
[ 6.303] Option "path" "/dev/input/event2"
[ 6.303] Option "device" "/dev/input/event2"
[ 6.303] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 6.303] Option "driver" "evdev"
[ 6.303] (**) Sleep Button: always reports core events
[ 6.303] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 6.303] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 6.303] (--) evdev: Sleep Button: Found keys
[ 6.303] (II) evdev: Sleep Button: Configuring as keyboard
[ 6.303] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 6.303] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 6.303] (**) Option "xkb_rules" "evdev"
[ 6.303] (**) Option "xkb_model" "evdev"
[ 6.303] (**) Option "xkb_layout" "us"
[ 6.303] (II) XKB: Reusing cached keymap
[ 6.303] (II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event10)
[ 6.303] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "evdev keyboard catchall"
[ 6.303] (II) Using input driver 'evdev' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
[ 6.303] Option "XkbRules" "evdev"
[ 6.303] Option "XkbModel" "evdev"
[ 6.303] Option "XkbLayout" "us"
[ 6.303] Option "_source" "server/udev"
[ 6.303] Option "name" "Apple Inc. Apple Internal Keyboard / Trackpad"
[ 6.303] Option "path" "/dev/input/event10"
[ 6.303] Option "device" "/dev/input/event10"
[ 6.303] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/input/input10/event10"
[ 6.304] Option "driver" "evdev"
[ 6.304] (**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
[ 6.304] (**) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Device: "/dev/input/event10"
[ 6.304] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Vendor 0x5ac Product 0x240
[ 6.304] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Found keys
[ 6.304] (II) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Configuring as keyboard
[ 6.304] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/input/input10/event10"
[ 6.304] (II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 10)
[ 6.304] (**) Option "xkb_rules" "evdev"
[ 6.304] (**) Option "xkb_model" "evdev"
[ 6.304] (**) Option "xkb_layout" "us"
[ 6.304] (II) XKB: Reusing cached keymap
[ 6.304] (II) config/udev: Adding input device bcm5974 (/dev/input/event6)
[ 6.304] (**) bcm5974: Applying InputClass "evdev touchpad catchall"
[ 6.304] (**) bcm5974: Applying InputClass "Multitouch Touchpad"
[ 6.304] (II) LoadModule: "multitouch"
[ 6.304] (II) Loading /usr/lib/xorg/modules/input/multitouch.so
[ 6.305] (II) Module multitouch: vendor="X.Org Foundation"
[ 6.305] compiled for 1.11.99.903, module version = 0.1.0
[ 6.305] Module class: X.Org XInput Driver
[ 6.305] ABI class: X.Org XInput driver, version 16.0
[ 6.305] (II) Using input driver 'multitouch' for 'bcm5974'
[ 6.305] Option "_source" "server/udev"
[ 6.305] Option "name" "bcm5974"
[ 6.305] Option "path" "/dev/input/event6"
[ 6.305] Option "device" "/dev/input/event6"
[ 6.305] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input6/event6"
[ 6.305] Option "driver" "multitouch"
[ 6.305] (**) bcm5974: always reports core events
[ 6.306] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input6/event6"
[ 6.306] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 11)
[ 6.306] (II) device control: init
[ 6.306] (**) Option "Device" "/dev/input/event6"
[ 6.311] (II) multitouch: devname: bcm5974
[ 6.311] (II) multitouch: devid: 5ac 240 1
[ 6.311] (II) multitouch: caps: left mtdata ibt
[ 6.311] (II) multitouch: 0: min: 0 max: 2048
[ 6.311] (II) multitouch: 1: min: 0 max: 2048
[ 6.311] (II) multitouch: 2: min: 0 max: 2048
[ 6.311] (II) multitouch: 3: min: 0 max: 2048
[ 6.311] (II) multitouch: 4: min: -16384 max: 16384
[ 6.311] (II) multitouch: 5: min: -4620 max: 5140
[ 6.311] (II) multitouch: 6: min: -150 max: 6600
[ 6.336] (II) pointer_control
[ 6.336] (**) bcm5974: (accel) keeping acceleration scheme 1
[ 6.336] (II) pointer_property
[ 6.336] (II) pointer_property
[ 6.336] (**) bcm5974: (accel) acceleration profile 0
[ 6.336] (II) pointer_property
[ 6.336] (II) pointer_property
[ 6.336] (**) bcm5974: (accel) acceleration factor: 2.000
[ 6.336] (**) bcm5974: (accel) acceleration threshold: 4
[ 6.337] (II) device control: on
[ 6.337] (**) Option "Device" "/dev/input/event6"
[ 6.342] (II) pointer_property
[ 6.342] (II) pointer_property
[ 6.342] (II) config/udev: Adding input device bcm5974 (/dev/input/mouse0)
[ 6.342] (**) bcm5974: Applying InputClass "Multitouch Touchpad"
[ 6.342] (II) Using input driver 'multitouch' for 'bcm5974'
[ 6.342] Option "_source" "server/udev"
[ 6.342] Option "name" "bcm5974"
[ 6.342] Option "path" "/dev/input/mouse0"
[ 6.342] Option "device" "/dev/input/mouse0"
[ 6.342] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input6/mouse0"
[ 6.342] Option "driver" "multitouch"
[ 6.342] (**) bcm5974: always reports core events
[ 6.342] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input6/mouse0"
[ 6.342] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 12)
[ 6.342] (II) device control: init
[ 6.342] (**) Option "Device" "/dev/input/mouse0"
[ 6.342] (EE) multitouch: cannot configure device
[ 6.342] (EE) Couldn't init device "bcm5974"
[ 6.342] (II) UnloadModule: "multitouch"
[ 6.342] (II) config/udev: Adding input device Built-in iSight (/dev/input/event9)
[ 6.342] (**) Built-in iSight: Applying InputClass "evdev keyboard catchall"
[ 6.342] (II) Using input driver 'evdev' for 'Built-in iSight'
[ 6.342] Option "XkbRules" "evdev"
[ 6.343] Option "XkbModel" "evdev"
[ 6.343] Option "XkbLayout" "us"
[ 6.343] Option "_source" "server/udev"
[ 6.343] Option "name" "Built-in iSight"
[ 6.343] Option "path" "/dev/input/event9"
[ 6.343] Option "device" "/dev/input/event9"
[ 6.343] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input9/event9"
[ 6.343] Option "driver" "evdev"
[ 6.343] (**) Built-in iSight: always reports core events
[ 6.343] (**) evdev: Built-in iSight: Device: "/dev/input/event9"
[ 6.343] (--) evdev: Built-in iSight: Vendor 0x5ac Product 0x850a
[ 6.343] (--) evdev: Built-in iSight: Found keys
[ 6.343] (II) evdev: Built-in iSight: Configuring as keyboard
[ 6.343] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input9/event9"
[ 6.343] (II) XINPUT: Adding extended input device "Built-in iSight" (type: KEYBOARD, id 12)
[ 6.343] (**) Option "xkb_rules" "evdev"
[ 6.343] (**) Option "xkb_model" "evdev"
[ 6.343] (**) Option "xkb_layout" "us"
[ 6.343] (II) XKB: Reusing cached keymap
[ 6.343] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event7)
[ 6.343] (II) No input driver specified, ignoring this device.
[ 6.343] (II) This device may have been added with another device file.
[ 6.343] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event8)
[ 6.343] (II) No input driver specified, ignoring this device.
[ 6.343] (II) This device may have been added with another device file.
[ 6.344] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
[ 6.344] (II) No input driver specified, ignoring this device.
[ 6.344] (II) This device may have been added with another device file.
[ 6.344] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 6.344] (II) No input driver specified, ignoring this device.
[ 6.344] (II) This device may have been added with another device file.
[ 6.369] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 6.369] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 6.369] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 7.550] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 7.550] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 7.550] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 7.754] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 7.754] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 7.754] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 7.963] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 7.963] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 7.963] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 8.165] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 8.165] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 8.165] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 8.364] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 8.364] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 8.364] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 16.133] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 16.133] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.133] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 16.359] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 16.359] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.359] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 16.560] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 16.560] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.560] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 16.760] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 16.760] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.760] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 16.961] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 16.961] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.961] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 17.159] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 17.159] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 17.159] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 18.008] (II) pointer_control
[ 18.830] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 18.830] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 18.830] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
nvidiafb works fine, but it has no dri and has problems with suspend.
How to resolve this problem with nouveau? Is it crtc-related or not? Playing with xrandr does not have any effect (except resolution change).
Last edited by nikicat (2012-02-22 15:00:18)I had an issue with my MBA seeing my HP printer and could find no good reason for the issue. In the end I deleted the printers WiFi connection and then turned around and set it up on my WiFi network all over again. My MBA now finds the printer every time. Okay ...so I don't actually know why it didn't work the first time, but it does now. Again, there was no apparent issue with either the HP printer or the MBA being connected to WiFi in the first place, but something different must have occurred in software/hardware the second time.
-
Resolution issue with macbook pro 13 (late 2013) and dell u2711
I have a Dell U2711 (native resolution 2560x1440) that I use without issue with a macbook pro late 2007 (running 10.10.x), various iMacs and Macbook air 2011 running 10.10. When I say without issue, the display works at its native resolution.
Last week we got a MacBook Pro 13in, late 2013 model.
If I connect this macbook via either thunderbolt connection to the u2711 using either DVI port on the dell, the maximum resolution that I can use is 1920x1080. I am using apple mini displayport to DVI adaptors (I have tried 2 different ones and 2 different DVI cables, with no improvement). Clicking option + scaled in sys prefs does not give the native resolution as an option.
However, I just discovered that if I use a DVI to HDMI adaptor and I connect the macbook to the display I get the full native resolution without issue (2560x1440).
I have zapped the pram, powered down the display etc etc etc and it made no difference.
I would prefer to use the mini DIsplayPort to DVI adaptor rather than HDMI, any suggestions appreciated.
TIA.Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Start up in Safe Mode. http://support.apple.com/en-us/HT1564
Best. -
Networking issues with MacBook Pro
I have tried to find this issue on line and in the forums and couldn't I have seen many people have similar issues using VPN connections or Citrix but nothing what I am seeing. I have 3 MacBook Pros that connect fine to our company network. They have the DNS settings from our DHCP server and I can see their leases and everything. We can connect to network drives however we can't connect any of them to the company's intranet sites. If we type in http://companysite and hit enter both Safari and Firefox come back stating that they can't find the server companysite. Not sure why it is looking for a server by the name of companysite when our DNS servers point to the servers that are hosting the sites.
If I type in the IP address of any company site then it works however using the name doesn't. So it sounds like an issue with DNS but again the DNS servers are in the network settings and Windows machines have no issues with using the http://companysite instead of using http://IP Address. Any assistance would be appreciated.OK, figured out that if I added my company's domain to the search domain list in Network Settings this would allow the MacBook to use http://companysite instead of the IP Address. However now I need to figure out the authentication issue. We use the end user's network credentials for access to the company intranet sites. Using http://companysite I get access denied. Using the IP address allows the end user to enter in their network credentials.
-
Audio Issues with MacBook Pro (Late 2008)
I am seeing an occasional issue with my MacBook Pro (Late 2008). The Audio will go out... and instead you will just hear static-like clicking sounds when and audio even happens. For example... when you have the up/down volume notification on... and you change the audio volume.. you hear clicks. Or... when you open up a file that has audio.. you will hear the static-like click when the audio starts to try to play.
The work around per-se is to completely shutdown and turn the notebook back on. A simple restart does not seem to fix it... it looks like the system needs to have a bit of energy drain first. Which... worries me that this is a hardware issue and not a driver issue.
Wondering how many others are seeing this???I went to and Apple Support Center last week and I asked some questions about audio because my MBP was having troubles too. The tech told me audio issues are very frequent on these machines and sometimes you have to change a part of the soundcard. He also added you have to bring the MBP to a support center if you're having the problem several times - in my case I'm waiting the next "crash" since I had only 2 issues so far... If you're under warranty go for a check up and see if it really needs assistance. Goodbye
-
Lion - Issues with MacBook Pro Keyboards
I have a 17" early 2008 MacBook Pro. It's Intel Core Duo 2.
Since installing Lion, I seem to be having issues with its built-in keyboard, such as Command + C randomly not working on some apps, most recently Google Docs. But also with Bean and another text edit app I use.
Does anyone know if this issue will be addressed, maybe via a firmware update at some point for the older MacBook Pros?
Thanks,
AlisaWell, if you are on the road you could try to do this:
1. boot with the Alt key pressed
2. select the recovery drive
3. reinstall Lion
Hope you left a backup at home!
Good luck... -
My 1 year old MacBook Pro has suddenly developed issues with playing all videos. They are very slow and stop constantly making viewing almost impossible. I have downloaded Flash player again but no help. I have strong internet via cable.
I'm also getting some really bad sound quality on facebook notifications. I've been forced to disable them they sound horrible like they are clipping.
Trying to figure out if this is a problem on all Late 2013 15" macbook pros or if mine is defective? This occurs even at around 20-30% volume levels with the Facebook notification sound problems... -
I am experiencing sound issues with my MacBook Pro. I am using a headset and when I am on a skype calsl I have a hard time hearing the other person, the sound is coming in and out and sounds digitized. This issue only started recently, the sound had been working fine for years before this issue.
I do not use Skype, but may be information from the below linked article helpful.
https://support.skype.com/en-us/faq/FA10992/Why-can-t-I-hear-the-other-person-in -Skype-for-Mac-OS-X
Best. -
Issues with MacBook Pro and ACD 30"
Does anyone else have a 30" ACD hooked up to their MacBook Pro yet? My 30" is having some issues with my new MacBook 2.0ghz and I would like to see if I am the only one.
#1) I am getting horizontal white lines flickering every minute or so. This does not happen on my 17" PB G4 1.67. This is more distracting than the "dancing pixel" problem.
#2) The bottom of the reflection of the album art in FrontRow is distorted when I use the 30" as the main monitor. I posted a photo here: http://members.cox.net/5337/fr.jpg - the "distortion" changes everytime I change song and it different everytime. It occurs on all the album work.
PB G4 1.67 - 17 Mac OS X (10.4)I think you were responding to Bob Smith, but regardless, I found the same information.
One thing I've noticed, and mind you, I don't have my MBP yet, so I'm working from photo's, but I am bothered by the DVI connector being so "exposed". I would have somehow put a sliding cover on it, or at least one of the plastic end caps. I know, I will most likely never use my MBP on an external display, HOWEVER, I don't like the idea that all sorts of gunk and stuff can easily get jamed into that big ole connector!
I think an air can or a fine photo brush should be part of your "kit". Just my opinion...
Bob -
Issues with Macbook Pro and Lion
Hi Folks,
Since I upgraded to Lion I have been having issues with Lion/Macbook Pro.
On occassions whilst using my magic mouse the mouse will start highlighting everything, neither left or right clicking will alleviate this. The only option I have is to go to the Apple menu and right click to reveal it (left click does nothing). I then have to right click on restart which produces the restart window, I then have to press "enter" to reboot the Macbook.
This issue originally started with 10.7.2 and I was hoping 10.7.3 would cure this issue, unfortunately this is not the case.
I have tried using a Logitech wireless mouse to see if it is an issue with the Magic Mouse but the same happens.
One issue which I have noted on the forums is that Lion does not like external monitors and I use a Dell 2209WA with the Macbook Pro in clamshell mode but not sure if this may have any link.
I have tried everything I can find on the forums but to no avail and would be very grateful if anyone out there had similar issues or better had found a solution.
Many thanks,
IainYour understanding of the problem seems correct to me. There's no way to fix it except to replace the logic board.
-
Issues with MacBook Pro 13-Inch i7 2011 with Lion help is mostly welcome
Hello I had some Issues with my MacBook Pro 13-Inch i7 - 2011.. Whenever i enter/exit safari i get the rainbow circle and my MacBook keeps freezing every now and then it's really annoying i get the rainbow circle when i try to shut down the computer aswell and sometimes the computer gets stuck with a white screen whenever i try to shut down the system.. I have 8gb ram and SSD i'd want some help on how to fix these issues please
Edit: The computer freezes when i play games aswell for around 8 seconds when it's newly started so i doubt it's anything to do with the heath it's something wrong with Lion since i never had it when i had Snow Leopard on this computer please help me with what i can do without reinstalling my iOS since i can't do that now i'm at vacation with a slow network which is around 0.85Mbit/s... I'm new to Mac so i have no clue how to repair the iOS same as Windows computers when you just insert the CD and press repairWell, if you are on the road you could try to do this:
1. boot with the Alt key pressed
2. select the recovery drive
3. reinstall Lion
Hope you left a backup at home!
Good luck... -
Issue with Macbook Pro (Screen Blotches)
I've got these issues with my screen, these bright marks appear when the screen displays dark colours, and I don't understand what's causing them.
I've got pictures of the problem here.
http://s891.photobucket.com/albums/ac118/zupnik/?action=view¤t=screen1.jpg
http://s891.photobucket.com/albums/ac118/zupnik/?action=view¤t=screen2.jpg
You can even see black dots in the actual marks themselves which I don't particularly understand. But will this be covered under my warranty? I haven't spilt anything on my Macbook and it hasn't suffered any knocks that I'm aware of.
I've checked the forums, but the other "blotches" which are mentioned are seen in light colours, whereas I can't see them at all in light colours.
Please give me some advice.
Thanks,
Anthony
Message was edited by: Zupnik
Message was edited by: ZupnikI have exactly the same problem.
But since I download the las update, everitime i conect it both displays just turn black and i just see the mouse's pointer. -
Line-In Issue with Macbook Pro
Hello! I have an issue with my line-in port of my Macbook Pro. I had a headset connected for a while and used it for Skype etc. After a while the microphone did not work anymore. I noticed that the input-level did not show any input to the computer anymore. I changed the headset but Mac OS still does not receive any input... The internal microphone works fine. What can I do?
Again, thanks for your help and effort sharing your weekend too solve the problem! Nonetheless I am still stuck. I set up another account and logged in to see if it works. But it did not. Then I cleanes /library/startupitems folder and checked the items in system preferences > accounts > login items to prevent them from loading at startup. But the line-in is still on strike and yes you are right, the built in microfone works fine and the line-out as well... I thought about making a backup of the whole system with Super Duper!, reinstalling MAC OS and trying to see if works then. If it does, it is a software issue, if it does not, the hardware might be broken... This would be the Windows way which I totally hate...
Maybe you are looking for
-
An ip address keeps showing up in the proxy setting under the "Bypass proxy settings for these Hosts & Domains." I keep erasing them and they pop back in.
-
How to write logs in custom files
Hi Experts, public Location objMyLoc=null; public FileLog objMyFile=null; Logger(){ objMyLoc = Location.getLocation("TestLocation"); objMyLoc.setEffectiveSeverity(com.sap.tc.logging.Severity.ALL); objMyFile = new FileLog("./log/applications/TestLog.l
-
Is there a way to unregister a computer?
When I log in online, I get the "we don't recognize this computer" message and I clicked through before unchecking the "register this computer" box. Is there a way to unregister a computer? I don't like the idea of "registered computers" that have n
-
Two days ago, the electricity went out, and my Mac G4 desktop, OSX 10.4.11 was on Sleep and it too Shut down completely. Tried to start the computer, but nothing. Looked up problem in another computer and followed directions on what to do. I disconne
-
Iball Usb modem(dongle) not working on g510 after windows 10 installation
Hi to all, I have just joined the forum to take some help from u people. I have a G510, on which i have just upgraded the OS from windows 8.1 to 10. After upgrading, some issues came like hdmi cable not working, external hard disk not detecting, etc.