Sizing SOl Man and number/impact of Alerts
We are trying to access our sizing for a Sol man implementation. We
have read the sizing document and it proposes not to have more then 40
alterts per server. Is this 40 limitation at the alert group level or
the alert name level?
Example: Is the 40 limit based on a, b, c or (d and e)?
a. Database Monitoring
b. Space management
c1.Tablespaces
system
d.free space
e. used space
c2.Segments
c3.Performance
c4.SAP consistency
c5.Health
Hello Jim,
Yes, this is correct for your current release and SP. There is no standard way to generate alerts for Communication Channels which are in error status. The alerting mechanism is based on messages. The message must throw an error for an alert to be generated.
However, some new functionality will be available with SP13. It does not cover exactly your requirement i.e. when a channel is in error. But it does cover channels that stop polling. See note 1808222 Trigger alerts if channel stops polling, for more details.
Regards
Mark
Similar Messages
-
Problem in moving project from Old Sol Man 3.1 to New Sol Man 4.0
Hi All,
I am trying to move a project from solution manager 3.1 version to a new solution manager 4.0 version. I followed the below steps:
1.Slected and transported the project using solar_project_admin tcode and created the transort requests in the old sol man version 3.1.
2.Copied the cofile and datafiles from old sol man and kept in trans directory of new Sol man 4.0 version at OS level.
3.Imported the requests into the new Sol Manager 4.0 successfully
4.When I tried to open the imported project it told me to run the "solman_log_comp_mgr program" to convert the project to the central logical components. I just did it and it went well.
I can see the project and do see the document types but no document names and getting all sorts of error messages when I tried to open these documents. Also I dont see the logical components under system landscape.
Before importing, I just have configured servers/hosts, databses and all the components of system landscapes in the new solution manager.
I request you to help me solve this issue. I also would like to know whether i followed proper procedures that i listed above? If not please suggest what procedures I should have follwed.
Thanks in advance.
Aravind SerikarHi Aravind,
to transport a project from 3.1 to 4.0 I would not use SOLAR_PROJECT_ADMIN to "migrate" a project. There for we developed SOLAR_MIGRATION there you can transport system landscape info, also you can transport projects. You should only transport system landscape info if in 4.0 SMSY is EMPTY. To transport projects you have only to specify your project and define a local folder. In this folder we store a few important information. Then all information will be collected in a batch job and automatically exported. Then you have to copy the data file and the cofile into the new trans folder. BUT do NOT forget the i-file. In the folder cofiles you will find a i-file, because we export knowledge warehouse content. This file is important, if you forget it you will get a return code 8. You do NOT have to add the files in the import buffer, we will do this automatically. To import the project, you have to call SOLAR_MIGRATION in SolMan 4.0 there you have to select import, then specify the folder with the few important information. We upload the info and start the import. That is it
Regards,
uDo -
Hi all,
I want to request SAP the latest DVDs of Support Package Stack for NW7.0, ERP 6.0, and Sol Man. 4.0, is it possible & how to do it?
Thanks,
Toan DoHi Toan,
It's possible to order them or download them from SAP Marketplace
http://service.sap.com/swdc
Regards
Juan -
Sol Man 4.0 and Test Director 8.0
Hi,
We currently run Mercury's Test Director 8.0 (SP2) where we store all of our manual and automated test scripts.
We are also planning to use our Solution Manager 4.0 to create our project, our blueprint/configuration and from there on link our test cases to the process steps.
I've read that there is integration between Test Director.
What I'm looking for is that since all of our test scripts are stored in Test Director, is it possible to link those individual scripts to each process steps.
In the Test Case tab of Sol Man, there is the Test Case Type column with several options. If I select "Test document" and use "Web Link" to link to the test script, it would only bring me to the log-on page of Test Director upon which I would need to log-on and then search the Test lab for my script.
Just wondering if there's a way to accomplish (without downloading all of our scripts from Test Director and then uploading them to Sol Man.
Any thoughts would be appreciated.
Thanks
DanielleDaniella,
Please take a look at this thread.This might help you how to integrate Sol Mngr with Test Director.
Solution Manager integration with Mercury product
Thanks
Sudhan Shan -
Sol Man 4.0 and Reporting out to BW
We have upgraded to Sol Man 4.0 and need to report the Change Request info, Change Document info and Transports log using an external BW box. In researching this forum, I have learned that we can export data out by activating the CRM business content. I need more guidance as to what DataSources to use. So far we have activated and found data in <b>0CRM_SRV_PROCESS_H</b> and <b>0CRM_SALES_ACT_1</b>, but I am missing information such as Change Advisory Board, Subject, External Reference, Decision Date, and Implementation date to name a few. Can anyone help? Is this documented ANYWHERE?? Thank you.
Charis Davenport
Project Management Specialist
The Walt Disney CompanyDaniella,
Please take a look at this thread.This might help you how to integrate Sol Mngr with Test Director.
Solution Manager integration with Mercury product
Thanks
Sudhan Shan -
Integration SAP Sol Man Service Desk and HP OV Service Desk
Hi!
We have installed SAP SM 4.0 and we also use HP OV Service Desk 4.5.And now we want to integrate both this solution.
As I understand, the interaction is realised wia web interface
In pdf file "Incident Exchange Service between HP OpenView Service Desk 4.5 and SAP Solution Manager 4.0 Service Desk" I have read what needed interface (or service) is integrated to the HP OV SD. But our administrator of HP OpenView Service
Desk sad that where no this srvice.
Are anybody know how to integrate SAP Sol Man Service Desk and HP OV Service Desk?Hello - the document is located at http://service.sap.com/solutionmanager - media library - technical papers - Service Desk WebServices API.
However, HP is CERTIFIED by SAP to connect to this SOAP interface - the only vendor so far (Remedy and Peregrine are in process.) HP has tested this interface at SAP and recieved certification several months ago.
I would have your HP person escalate this issue higher in HP. -
Sol Man HP QC Integration -Install TAO Client
Hi Team,
I am having the requirement to integrate SAP Sol Man with HP QC. In the process, it has been mentioned that, "Install TAO Agents in the SAP Backend systems".
What is TAO clinet? Why this is to be installed?
Backend system means , all the satellite systems which have been conneted with sol Man?
Thanks in advance
KumarHi Kumar,
What is TAO clinet? Why this is to be installed?
This is just another type of application. The SAP Test Acceleration and Optimization application supports customers in automating their business process tests by automatically generating draft test cases and test components. Its tight integration with SAP Solution Manager helps in identifying the impacted test cases and components when there are changes in the landscape. The SAP Test Acceleration and Optimization application creates modular test cases, which are easy to maintain, when the test cases are damaged due to functional changes.
The SAP Test Acceleration and Optimization application supports customers in automating their business process tests by automatically generating draft test cases and test components for SAP GUIu2013based transactions. Using this application in combination with the SAP Quality Center application by HP, you can modify, compose and execute automated business process tests in SAP software development and test systems. The SAP Test Acceleration and Optimization application also provides a lot of reusable library components, which could be used for test composition.
Backend system means , all the satellite systems which have been conneted with sol Man?
It might be all the systems or the system through which you want to perform, or the systems that you want to test the Business Processes
For more details please check these SAP Notes.
Note: 1391728 SAP TAO 2.0 Release and Upgrade Information.
Note: 1404715 SAP TAO 2 Installation Information.
SAP TAO Agent will be available with the SAP Solution Tools Plug-In ST-PI which has to be implemented on all the managed systems that we are planning to connect to the SolMan and SAP TAO systems.There is a compatibility matrix which you can find in the Note: 1404715.
Also you can find some materials and demos under http://service.sap.com/testing Test Management and Media Library.
Hope this is helpful.
Thanks & Best Regards,
Raghavendra.
Edited by: Raghavendra B Deshpande on Jul 2, 2010 6:42 AM -
Unable to create EWA in SOL MAN
Hi Experts,
I configured EWA for SOL MAN....
I successfully generating alerts for satellite systems but not for own SOL MAN
Alert running successfully with PMS and Refresh sessins with out error
my RTCCTOOL not showing any errors/requiremwents...
please suggest...
version : SAP SOLMAN EHP1
Regards,
Siva.
Edited by: skreddy555 on Jan 30, 2011 1:38 PMHello,
So you are saying you can generate EWA reports for Satellite systems but not Solman itself?
That really doesn't give any details to the problem, as what has occured and what has not.
Is the EWA scheduled? Have you run solman_setup on Solution Manager as the managed system?
If you want to generate an EWA for Soman itself, then you also need to treat it like a managed system.
IWhat it the status in solman_ewa_adm? Is it active? If it is ther eand active it should be scheduled and then there should
be something in DSWP. Is the icon a bottle? 2 Bottles? A Red Flag? A Grey Diamond, a Document?
Is the maintenace package task scheduled and running with no errors? Are you using the SM_<SID>CLNT<nnn>_BACK RFC or the NONE RFC in SDCN as the back RFC and have you tested them?
Is SM:EXEC SERVICES finishing or cancelling? If it is cancelling is there a dump?
These are some things to check. But it is hard to even gues what the problem is because you have been so vague.
If you can describe what you have done to configure, what is working, and what seems not to be working, this would help to get an idea where & what the problem may be. But you generally need to treat the Solution Manager exactly the same as a satellite system when setting it up for EWA reporting. This make is both a managed and the managing system. So you can't skip any steps just because its the managing system. If you describe the problem in more detail, and if any part in the process is working, and what is not, that is helpful.
You should see it schedulied in DWSP. If not, then it's not scheduled. But the status in DSWP can tell a lot. A Red Flag means a problem with SDCCN tasks or the RFC, a Grey Diamond means important data is misisng and the report can't be generated, so that is a probelm is data collection, two flasks indicates sm:exec services has not run or is failing.
So you really need to give more information....unless I have already touch upon your problem, I don't know how helpful people can be but toss out general information.
I'd like to help more if you can give more details to what you see and don't see that you should.
Regards,
Paul -
Generation of Configuration document through Sol Man
Dear Friends,
We are using Solution Manager for our R/3 implementation. In realization phase, we are capturing all transports in BC sets through Sol Man. Via Sol Man, i am executing t.code SCPR3 (Maintain BC set), after capturing all the confugurations in BC set, i am maintaining configuration related details in the same BC set, as below.
In SCPR3 t.code, in top menu,
Edit-----Add documentation.
Here i am maintaining all configuration related details. And saving as "Raw version".
The same way, for all the BC sets, i am maintaing the configuration related details within the same BC set itself.
My client requirement is:
1. Now i am calling all the BC set in Sol Man (t.code SOLAR02, "Configuration" tab, under "type" coloum, i am selecting, "BC set".
2. <b>Now, if i generate "Configuration Guide", the system has to automatically pick the the configuration details, what i have maintained in the BC set (as Add documentation).</b>
How to do this?
regards
SenthilDear Friends,
In SCPR3 t.code, in top menu,
Edit-----Add documentation. can we make this "Add documentation" to be mandatory? So without entering the details, one should not possible to SAVE the BC set.
Can we make any settings for this?
Thanks
Senthil -
SAP Sol Man 4.0 Config guide
Can some one tell me where i can find SAP Solution Manager 4.0 config guide?
Also can some one send me any material for Sol Man certification exam.
will reward points
thanks
PRHi PR,
please have a look at: www.service.sap.com/instguides -> SAP Components -> SAP Solution Manager -> Release 4.0 for the Configuration Guide and other related Guides such as the Master Guide etc... Here you will also find links to other material.
For configuring the Solution Manager you need to go to transaction SPRO in your SolMan. Here you'll find the configuration of the Basic Setting, whcih you need to get it running and the scenariospecific settings, which are relevant for the scenarios.
Best regards,
Annett -
SQL 2005 Authentication for Sol Man 4.0
Hi,
I have used the SQL4SAP.VBS to install SQL 2005 Entp Ed for Sol Man 4.0.
I do not know what authentication mode has been setup by this script
How do I know this ?
How can i change the mode to mixed mode as reuqired by Sol Man 4.0
I havent started the SAP Inst yet .
Thanks
UdayHi,
This is how you need to check.
1. In the Enterprise Manager, select the server and then choose Action ® Properties.
The SQL Server Properties dialog box opens.
2. Select the Security tab.
Here you can see. Hope this solves your problem. Feel free to revert back.
--Ragu -
Digital Signatures in eCATT or Sol Man
Hi All,
How can we include digital signatures feature either in eCATT scripts or in sol man.
Regards,
JustinHI Justin,
I am afraid I cannot be of much help either as it very much seems like SAP has not extended the digital signature functionality besides it's current support for approvals of test documents and notes in the test management domain.
To be able to use this function:
SAP Solution Manager -> Scenario specific settings -> Implementation -> Document Management -> Digital Signature & Document status
Please note that there is a 'catch' here which might be of help to you : Manual test cases of type - 'Test document' can also use this feature.
I did not find any customizations possible for automated test cases like eCATT
I, myself, am not in a position to try this feature and let you know.
However, if you are interested in the document, please revert with your email id so that I can mail it to you.
Byeeee! -
How do I access CProjects in Sol Man
Hi all
I've been looking through the SAP Project management tools and have started familiarising myself with SOLAR01 / 02, RMMAIN, etc but have found through digging in Google that SAP has another set of project management tools called CProjects. (By all accounts you can do Gantt charts, resource scheduling and all that Jazz?)
I think it is installed in our Sol Man solution as I can give my user the Auths required for access to CProjects inc SAP_CPR_PROJECT_ADMINISTRATOR etc.
However I cannot yet find out how to access the CProject menu's etc (if they exist as such). Can you give me some help here as to what these menu items are and how do I confirm that CProjects is actually fully installed.
Also are there any other SAP PM Tools my system should contain?
ThanksHi Mapp,
The features of Solman and cProjects complement each other to provide a complete toolset for effective project management.Solman project can be extended to cProjects to manage project phases and tasks.
To access cProjects via Solman, navigate to Environment -> Project IMG -> Select 'Logical Component' cProjects Suite or use transaction SOLAR02 and navigate to Solutions/Applications -> mySAP PLM -> Configuration Structures -> SAP cProject Suite 4.5 -> Basic Settings for cProjects.
Hope this helps.
Regards,
Pradeepkumar Haragoldavar -
Automatically create scheduling lines based on quantity and number of containers
Dear Gurus
Our business requires that when creating a sales order automatic scheduling lines should be created based on the quantity and number of containers.
i searched and found of using VOV6 but i am a bit confused on how to set up this calculation logic.
Thanks and RegardsDear Arun kumar
Our business requires that when creating a sales order automatic scheduling lines should be created based on the quantity and number of containers.
Generally shedulines are confirmed Based On qty only ...Or Number of containers
Check OVLZ Maintain Days
MMR--Maintain RLT MRP 3 VIEW Or goods pressing time MRP2 VIEW
VOV8--Lead time in days
VOV6--Activate availability check, Req check box
OVZ9--Remove RLT Check box
SCAL--Factory Calendar also impact please check
If customer Is maintain complete delivery ..Make it Complete check box in XD01 But while creating Sales order if he agrees Partial delivery also according to company activate check box Fixed qnty/date in Schedul lines
And make it availability check in sales order level not in delivery level
Let me know your requirement is some thing different -
Sol Man 7.1 - SLD / LMDB Synchronisation Error
Hi experts,
I am trying to perfom a full synchronisation between LMDB of Sol Man 7.1 and our Central SLD (CIM 1.6.16, SAP_CR 7.3)
Somewhere around 20% - 30% the full synch gets an error and restarts automatically at 0%.
Error message in application log is:
Error in method call SAPExt_EnumerateInstancesNoSubclasses: Failed to leave transaction:
Full sync failed for class SAP_SoftwareFeatureSoftwareComponent
Full sync needs to be repeated after correcting this error
Error message #s:
BL001
LMDB_CS_ERROR023
LMDB_CS_ERROR024
Did raise a call already but no useful response until now.
Anyone else had problems like this?
ThanksHi,
[Note 1480419 - Release Restrictions for SAP Solution Manager 7.1|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1480419], this note saying the restriction on LMDB and SLD sync, Moreover they are suggesting to upgrade SP01 to fix the LMDB issue..
Have you tried out?
Thanks,
Jansi
Maybe you are looking for
-
I tunes tries to update over and over again to 10.2.2. Each time it fails and lists message"Service 'ipad service'could not be installed. Verify that you have sufficient privelege to install system services." I have an iphone and use itunes to upda
-
Whats the price to repair LED screen
My uncle broke my macbook pro's led display in a fit of anger. So I'm stuck with a destroyed screen and i need to know how, where, and the price of repairing it. i really don't want to buy another pro so if you guys could give me your best input/adv
-
Setting Colors to window defaults, UI gets reset
I created a Custom UI delegate for tabs to display the selected tab a certain color. that color is the frame color, i.e. : fillColor1 = UIManager.getColor("activeCaption"); so if you are using the windows OS and you set your active caption color to D
-
How do I disable "play on single-click" from iTunes search?
Just downloaded iTunes 12.1.1.4 (Windows 8, 64-bit) in order for it to sync with my iPhone. I see that now when I search for an artist, clicking on the album (or any search result, ***???) will start playing that album automatically. I don't want to
-
Rows per batch and DefaultbufferMaxrows
Hi, What is the difference between rows per batch and DefaultbufferMaxrows in data task? Is there any relation between these two?