Sizing strategy document for the NW 2004s Portal

Hello Everybody,
I am looking out for a sizing strategy document for performing the sizing exercise on the SAP Netweaver Portal (NW2004s Portal). Could anyone help me out in finding these documents?
Thanks much,
Sunitha Subbarao.

Hi Sunitha,
You will get the complete documentation for sizing SAP enterprise portal on http://service.sap.com/sizing.
Also refer to http://www.sap.com/benchmark.
Please reward if it helps you.
Thanks & Regards,
Ami

Similar Messages

EHSM - Create Vendor - error: 'Could not find a document for the given key'

Dear all,
In the Chemical Approval Process I have attached a SDS document to the Approval Request. You can assign a Vendor to the SDS. As there are no (EHSM) Vendors currently available in the system I would like to create a new (EHSM) Vendor by clicking on 'Create Vendor'.
This will lead me to the following Webdynpro Application: Edit Vendor (EHFND_UI_VENDOR_OVP).
Only one field is shown in the Webdynpro named: 'Name of the Vendor'. After typing a name e.g. 'test', the following error message appears; 'Could not find a document for the given key'. See also attached document. This issue looks like a missing number range, however I could not find a EHSM number range for Vendors.
How to solve this issue?
More information:
Software Component: SAP EHS Management (EHSM) Support Package: 3
Process: Chemical Approval
Webdynpro application: EHFND_UI_VENDOR_OVP
Thank you.
Kind regards,
Roy

Hi
babooraj
This might be a problem with Windows Power Shell.
The solution is to copy the folder: "PSWorkflow" from "C:\Windows\System32\WindowsPowerShell\v1.0\Modules\"
to "C:\Windows\SysWOW64\WindowsPowerShell\v1.0\Modules"
Than everything works fine.
Ps.: @Microsoft, please fix this problem in future versions.
Thomas van Veen

Preparation of AS IS and TO BE Documents for the MM Related Areas

Hi All,
Can you please help me in preparation of AS IS and TO BE Documents for the MM Related Areas.
Thanks in advance.
Unmesh

Unmesh,
You need to have discussions with business to analyse what should be included in TO BE and what should be in AS IS.
You can try preparing the documents, let me know where you get doubts.
Raghavan

I used "my documents" for the profile folder, I removed the profile and firefox asked if i want to remove its file, and it took ALL my file except a few, all my photographs etc, are these now unrecoverable? as they are not in the recycle bin

I used "my documents" for the profile folder, I removed the profile and firefox asked if i want to remove its file, and it took ALL my file except a few, all my photographs etc, are these now unrecoverable? as they are not in the recycle bin
disaster, thanks firefox 1 year of photos lost

Thanks for the obvious question. I mean it. The very same thought came to me this morning and, sure enough, I had booted into another drive--my old one that, of course, had the old desktop, etc.
It didn't dawn on me that this was the case since I hadn't set it as a boot drive but I guess in the course of all the restarts I did, it got switched.
I'm back to normal again.

No FI document for the GR created thru SRM confirmations

Hi
Can any one clarify me, why there will be no FI document for the GR which is created in the backend which thru SRM confirmations. This is a classic scenario ver 4.0
Please suggest me.
Regards
Srujan.k

Hi,
Make sure that the Purchase Order Line item does not have tick mark on 'GR non-valuated' indicator. If this is so, the FI document will not be posted at the time of confirmation, and it will be posted at the time of Invoice Posting (MIRO Transaction). There will not be any GR/IR Posting if above indicator is tick marked.
As Sanjeev mentioned, the 'GR non-valuated' indicator gets tick marked automatically if you distribute the cost to mulitple cost objects OR if you have set up Account Assignment Category in such a way that GR non-valuated is tick marked by default. Please check either of them.
Regards,
Ashok B Kawa

Some one can provide me documents for the Tasks in UCMON

Hi,
some one can provide me documents for the Tasks and its dependencies in UCMON
Those task are below
1>Period Initialization
2.>Load R/3 data
3>Retained Earnings
4>Currency Translation
5>Elimimination IU Rev&Exps
6>IU Sales
7>IU Pay/Rece
8>Elim COI
9>Reclass(DOM-CORP)
10>Reclass(MX-CORP)
11>Reclass(DOM-INTL)
12>Reclass(ALL-CORP)
Please provide me document on the above tasks and their dependencies in UCMON.
I would like to know what are these steps and what it do in UCMON.

Prasad,
You have to apply to guys and documents of the company from which you took this info. This is a completely custom set of tasks. You either should read about them in the company's manuals or go through the tasks and underlying methods (and simultaneously through on-line help:
http://help.sap.com/saphelp_sem60ep1/helpdata/en/62/f7e73ac6e7ec28e10000000a114084/frameset.htm).
If it doesn't help, then if I were you' I'd consider leaving this job. It might be not for you.

Invoice message Preseding document for the invoice is not available.

Hi .
when I want make the Invoice process to PO the system show the header Message
Invoice message Preseding document for the invoice is not available.
even the Po recepcion is made into SRM.
any suggestions
thanks .

Hi Oscar
It seems the PO has GR Based Invoice Verification indicator active. IN that case system will look for the confirmations/GRs for this PO in order for you to post an invoice for this PO.
Regards
Virender Singh

Process 4010 and 5010 X12 834 documents for the same ISA identifiers in Biztalk 2010.

Hi,
I am facing an issue, where I have to process 4010 and 5010 X12 834 documents for the same ISA identifiers in Biztalk 2010. Do you have any solution on this?
Thanks,
Imran

Hi Sean
I am working on a project where we are processing inbound X12 834 5010 and X12 834 4010 documents using BizTalk 2010.
We have setup the parties, which send either 4010 or 5010 documents. Now, few of the parties have started sending both types of documents (4010
and 5010) and the document has same identifiers.
I am facing an issue in configuring party to receive both 834 4010 and 5010 transactions using same identifier. How do I setup the party in such case?
Thanks Imran

Can create twice billing document for the same delivery in STO

Hi experts,
I donot have problems in Standard Sales order when I create billing doc via VF01. When I try to create another billing doc in VF01 for the same delivery it says error, as the item is already invoiced.
This is correct.
But while creating invoice for STO order, system allows me to create more than 1 billing document for the same delivery. If we accidentally or purposefully create it allows to create many.
Could you let me know where in SPRO (IMG) I can control this?
Thanks,
Pri

Hi
STO billing if it is intercompany STO followed by IV billing type you can create only once
No special settings reqd to achieve this as you bill (IV billing type) the delivery the first time, the delivery status gets completed
If Intracompany, the billing type is proforma invoice F8 and this can be created as many times as you wish as proforma doesnot update accounting
if your issue is this
Even this also if you want to restrict only once then try with copying requirenments 311 at item level (i hope standard item category NLN is used) in VTFL between header NL to F8
Regards
Raja

Installation document for the latest essbase version

Latest Essbase version.
Where can i find the installation document for the latest essbase version

Install/config doc - http://docs.oracle.com/cd/E40248_01/epm.1112/epm_install/frameset.htm?launch.html
Cheers
John
http://john-goodwin.blogspot.com/

F110 - each item in each payment document for the same vendor

Hi Guru,
When i use F110 to do auto payment run for one vendor, each item is paid by each payment document although the document currency is the same, do you know why it appear like this, by right, all the vendor open items should be paid in one payment document, what is the possibility for this scenario, how to check it.
thanks,
Kick

There are things that you should check which may be causing this:
(1) In the vendor master (FK03) go to the section "Payment Transactions Accounting" and see whether the box "Individual Pmnt" has been selected. If it has, then deselect it.
(2) In transaction FBZP go to the "Payment Methods in Company Code" section, double click on the relevant payment method, and check whether the box "Single Payment for marked item" has been selected. If so, deselect it.

'BAPI_GOODSMVT_CREATE' takes more time for creating material document for the 1st time

Hi Experts,
I am doing goods movement using BAPI_GOODSMVT_CREATE in my custom code.
Then there is some functional configuration such that, material documents and TR and TO are getting created.
Now I need to get TO and TR numbers from LTAK table passing material documnt number and year, which I got from above used BAPI.
The problem I am facing is very strange.
Only for the 1st time, I am not finding TR and TO values in LTAK table. And subsequent runs I get entries in LTAK in there is a wait time of 5 seconds after bapi call.
I have found 'BAPI_GOODSMVT_CREATE' takes more time for creating material document with similar issue, but no solution or explanation.
Note 838036 says something similar, but it seems obsolete.
Kindly share your expertise and opinions.
Thanks,
Anil

Hi,
please check if some of following OSS notes are not valid for your problem:
[Note 838036 - AFS: Performance issues during GR with ref. to PO|https://service.sap.com/sap/support/notes/838036]
[Note 391142 - Performance: Goods receipt for inbound delivery|https://service.sap.com/sap/support/notes/391142]
[Note 1414418 - Goods receipt for customer returns: Various corrections|https://service.sap.com/sap/support/notes/1414418]
The other idea is not to commit each call, but executing commit of packages e.g. after 1000 BAPI calls.
But otherwise, I am afraid you can not do a lot about performance of standard BAPI. Maybe there is some customer enhancement which is taking too long inside the BAPI, but this has to be analysed by you. To analyse performance, just execute your program via tr. SE30.
Regards
Adrian

A signed letter or document for the IRS?

I'd like to create an iTunes Connect account to publish iBooks in your store, after creating them with iBooks Author. You've specified that, in order to create such an iTunes Connect account, I need a U.S. Tax ID. In order to request one from the IRS, I've been requested (by the IRS) to supply, and I quote, "A signed letter or document from the withholding agent, on official letterhead, showing your name and verifying that an ITIN is required to make distributions to you during the current tax year that are subject to IRS information reporting or federal tax withholding."
I'd like to request such a signed letter or document from Apple, but with no luck. What may I do?

I'm going to send off my W7 with the letter provided by Amazon with a link And full details provided on this website
https://kdp.amazon.com/self-publishing/help?topicId=A1VDYJ32T5D3U4
Maybe as Amazon have been at this for so long they have dealt with all the hurdles involved. Maybe someone from Apple should have taken a look at this information.
I've been so disappointed with the support from Apple, that I will publish my first book, written without the use of iBooks Author on Amazon.

Change Documents for the table EKET

Hi ,
We create a purchase order from ME21N . We do have some data for delivery schedule for the data .
This delivery schedule data gets stored in tabe EKET . When this PO is processed from V_V2 the dates
in the delivery schedule are overwritten and he new values will be even in the table EKET . When I follow
the navigation Environment -> Item Changes I dont see the changes documents for these fate fields . I did
debug through the FM EINKBELEG_WRITE_DOCUMENT to see but it looks like it is not captuirng the fields .
Now my requirement is to find where the change documents can be found for the date changes in the delivery
schedule tab in the PO . The fields of interest are :
EKET-SFLDT , EKET-DAT01, EKET-MBDAT , EKET-LDDAT , EKET-WADAT .
I tried for some OSS notes too, but in vain . Can anyone please help to find out how we find the changes documents for these fields .
<b>Also please tell me if there are any OSS notes which explain us to extend the table EKET .</b>
Thanks and Regards ,
Varun .

HI ,
I did check the table CDHDR and CDPOS and also the change document is checked for the data element but no change documents are stored in CDHDR and CDPOS .
<b>Did anyone ever extend the tabke EKET ? Any OSS notes available for this .</b>
Regards ,
Varun .
Message was edited by: varun sonu

How to search for the list of portal components that use a certain LOV?

hi,
does anyone know how to search for all of those portal components which use a certain other component?
let's make it specific. how can i know which of the portal components (portal reports and forms, content folders, etc) are using any certain LOV?
will really appreciate any hints.
naqvi

Please ask this question in the Oracle Text forum (formerly interMedia text). You will get the experts that work with it every day there.

Sizing strategy document for the NW 2004s Portal

Similar Messages

Maybe you are looking for