Sizing the Preference window on netbook
I am working with a student with a new netbook computer. When we go to change preferences, the
preference window goes below the screen and we cannot select OK. That window appears to have no controls that will help us resize it.
Any ideas on how to proceed?
Change the screen resolution of the netbook.
Similar Messages
-
Whenever I open the preferences window and close, a blank square of 120px (aprox) appears at the top left corner of the screen. The square doesn't dissapear untill I exit from Firefox and reopen it.
[http://cl.ly/5DCr Screenshot] ScreenshotCan you go to Help > Troubleshooting information and copy and paste everything here?
This is a [https://bugzilla.mozilla.org/show_bug.cgi?id=641288 known bug] but we need more information on it. -
Illustrator locks up when trying to open the preference window
I have CS5 on windows 7. When I try to open the preference window illustrator locks up and will not open it. I can hit escape and it will go back to working fine. I have tried leaving it thinking maybe it was an odd loading issue but nothing changes. Other than this everything works perfectly fine it just refuses to open the preference window. I have tried searching but I can't find any one else with this issue, I am hoping to avoid having to reinstall it but it is starting to look like that may be my only option.
crutchlets,
You may consider at least two approaches.
One is to wildly increase the monitor resolution to see whether it is hiding somewhere out there, in which case you can drag it into the area with the other things, then reduce again and clean up the mess.
Another one is to try the relevant steps in the following list (1) - 4) and 6) as the last resort).
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
Why is the Preferences Window in Firefox 3.6.12 for Linux coming-up blank?
I just finished manually upgrading Firefox on an old machine running openSUSE 10.2; I decided against upgrading my OS because this is the only version in which my Olympus MAUSB-10 picture card reader works. In order to do this, I had to compile and install GLib 2.12 and ATK 1.32; all other dependancies were already included in this version of Linux. And I am currently running KDE, although GNOME is also installed. Firefox 2.0.0 is also installed on this machine.
Although the browser works fine from my home directory (I am using it right now to fill-out this form.), whenever I click on Edit and then Preferences, I find that this window comes-up blank. Could anyone please tell me how I might fix this problem?
Thanks in advance! ;)
KarlDoes the OpenSUSE distribution meet the Firefox requirements?
http://www.mozilla.com/firefox/system-requirements.html - Firefox 3.6 System Requirements
You may have a problem with the preferences file prefs.js.<br />
See http://kb.mozillazine.org/Preferences_not_saved
Create a new profile as a test to check if your current profile is causing the problems.<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br />
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
I have adobe Acrobat 9 Pro.
I would like to edit my email preferences so that when I create an email with the PDF as an attachment the name of the file will automatically also be the subject line of the email.
according to the help instructions, I should find this by: " open the Preferences dialog box, and under Categories, select Email Accounts."
In my version, "Email Accounts" does not appear in the categories list.
Where do I go to edit email preferences?See https://support.mozilla.com/en-US/kb/Form+autocomplete#Deleting_individual_form_entries
-
Safari won't let me show my passwords in the preferences window
safari won't let me show my passwords in the preferences, cannot put a check the "show password" box
Did you enter your admin password when prompted to show passwords?
Which OS X is installed?
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac.
The version is noted there. -
This bug exists in 3.6 (and perhaps earlier) and 4.0. Simply selecting the General preferences tab creates folder ~/Download no matter what option is currently set for the download directory.
Try disabling hardware acceleration. Many visual bugs can be attributed to issues with graphics drivers.
(Firefox -> Options -> Advanced -> General -> [ ] Use hardware acceleration when available) -
Ever since I got Firefox 4.0 my browser window won't re-size like it used to. When I go to make the window size smaller I lose the scrolling bar on the right hand side unless I keep the window very wide. I like having smaller window sizes but I can't use it the way it used to be???
If the left is being cut off, then you've designed off the left of the page in Muse Design view. The blue guides indicate the page edge and a margin guide within the page. The zero in the ruler is the left edge of the page.
The page won't be responsive It will center as long as the browser is wider than the page. Then it will left align (on the zero point on the ruler in Design view). -
My external backup disk will not show up on my desktop anymore. Always did before. Using WD external backup disk.Any suggestions?
Try power cycling the entire network
That means powering off every device in any order that you want
Wait a few minutes
Start the modem first and let it run 2-3 minutes
Start the next device connected to the modem next, and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
Check the network for proper operation -
The help page requires me to write something here, but I have no additional details.
see '''http://kb.mozillazine.org/Resizing_oversize_window'''
see http://kb.mozillazine.org/Problematic_extensions -
Dynamically sizing the flash window
I would like to be able to run my Flash at 600 X 600 until it
ends then change it to 100 X 100.
Is this possible? If so how do I do it?
I apologize if this is in the wrong section.Have flash call the javascript that resizes it on the html
page. This is a weird request so it will probably require some
crazy javascript on the html page to resize the swf. I have seen
the ability to change to full screen, so it seems possible. -
Im running a brand new imac. FaceTime had been working great. Suddenly, no call were coming in and when Facetime reopened, it reads "there is no connected camera" Help, please.
http://support.apple.com/kb/HT2090
works for iSight as well as FaceTime cameras. -
I used to set Firefox to full screen; but my new monitor is too big to do that. So I sized the Firefox window to the size I want, and I carefully centered it (using a tape measure to get it as close to dead center as possible).
But everytime I open a new window, it appears shifted slightly to the right (I think that's called cascading, but I'm not sure). While some might like this feature, I prefer it open exactly on top of the previous window; and it's a pain to have to shift the new window manually every time I open one.
How do I set Firefox to open new windows right on top of the parent window (and the same size), covering it up completely?
Thanks,
Dafydd abHughWell, then isn't there some way to induce Firefox to give Windows parameters that make it open the fershlugginer window in the *same* position, instead of an offset position?
Dafydd -
Hi
I wonder if there is any way to create in Director a
preferences window (see example below).
http://www.guide.lancs.ac.uk/tellguidemyname.html
In particular what i would like to do is to allow my users to
select the things they want to select from the preferences window
and then when press save to get the appropriate movie.
If the user selects the language of the system to be English
then play movie English otherwise
if the user selects the language of the system to be Greek
then play Greek movie
and
If the user selects architecture + maritime related
information to play movie A (that contains the relevant content)
otherwise if the user selects History and architecture then
play movie B (that contains the relevant content)
I would also like to record the preferences selected in some
kind of text file that would tell what the user selected. Is there
any way to do that?
All ideas will be appriciated
Many thanksI don’t have a simple dir I can post but Buddy
API’s help file has some code snippets that make good
examples. If you have trouble getting started let me know. What I
can post are some examples of how to use my scripts to code the ini
data, keep in mind that you only need to code the data if you are
allowing the users to type text strings to be stored in the ini
file, if all of your data is generated by lingo you can make sure
the data is ini safe yourself without having to code it first.
First the scripts, copy and save in a movie script cast
member:
on codeIniData cMode, iniString
case cMode of
"read" :
iniString = replaceField(iniString,"¬","=")
iniString = replaceField(iniString,"¶",RETURN)
iniString = replaceField(iniString,"µ",";")
iniString = replaceField(iniString,"§","#")
iniString = replaceField(iniString,"«","[")
iniString = replaceField(iniString,"»","]")
"write" :
iniString = replaceField(iniString,"=","¬")
iniString = replaceField(iniString,RETURN,"¶")
iniString = replaceField(iniString,numToChar(10),"¶")
iniString = replaceField(iniString,";","µ")
iniString = replaceField(iniString,"#","§")
iniString = replaceField(iniString,"[","«")
iniString = replaceField(iniString,"]","»")
otherwise : alert "Unknown mode in codeIniData."
end case
return iniString
end
on replaceField input, stringToFind, stringToInsert
output = ""
findLen = stringToFind.length - 1
repeat while input contains stringToFind
currOffset = offset(stringToFind, input)
output = output & input.char [1..currOffset]
delete the last char of output
output = output & stringToInsert
delete input.char [1.. (currOffset + findLen)]
end repeat
set output = output & input
return output
end
OK, lets say you create the following ini file using notepad
and save it with the name “foodPrefs.ini” in the same
folder as your dir movie:
[breakfast]
sue=coffee
bill=bagel
tom=eggs
[lunch]
sue=Chicken McNuggets
bill=Quarter Pounder with cheese
tom=Fries
If you want to read Bill’s lunch preference into
Director simply use the following:
myIniPath = _movie.path & " foodPrefs.ini"
billsLunch =
codeIniData("read",baReadIni("lunch","bill","Error",myIniPath))
if billsLunch = "Error" then alert "Error reading settings
file."
If you have an editable text cast member with the name
"suesBreakfast" and ask sue to type her breakfast order, to save
that order do the following:
myIniPath = _movie.path & " foodPrefs.ini"
suesOrder = codeIniData("write",member("suesBreakfast").text)
resultCode =
baWriteIni("breakfast","sue",suesOrder,myIniPath)
if not resultCode then alert "Error writing settings file."
The most common reason for getting the alert when reading or
writing to the ini file is either an error in your path or having
the ini file open in notepad at the same time Buddy API is trying
to access it. For best results quit notepad before testing.
Storing the contents of an editable text cast member is an
example of why you want to code the ini data. It is possible,
although unlikely, that the user will type characters that have
special meaning in an ini file, I simply temporarily replace those
characters with others that are impossible to type (well, not
really impossible, but very unlikely).
If you are curious, numToChar(10) is the linefeed character
which I replace with a standard RETURN. The most likely reason to
encounter a LF is because the user copied and pasted the text from
another source. Director doesn’t display LF’s in
strings, so replacing it with a RETURN keeps the formatting looking
like the original. -
PS CC 2014 Actions launch Preferences Window
I've been using Photoshop Actions for years but recently I've encountered some odd behavior. I made a simple action that removes transparency from a document by executing the Trim command. The last part of the action then saves the changes and closes the PSD file. It worked great until today.
Here are the steps I'm performing:
While I'm in Bridge, I select all my files in the current folder, I initiate this Action from Tools \ Photoshop \ Batch. This switches me over to PS with the Batch window open. From there, I can choose the action from the drop down list and run it.
The action runs its course on the selected files with no issues the first time around.
However, if I try to run the action again on files in a different folder (from Bridge), I keep getting the Preferences Units & Rulers window launches each time the file loads. I have to sit there and press the Escape key each time in order for the action to complete.
I tried to duplicate the behavior by stepping through the Action manually in order to pinpoint which step is the culprit, but the Preferences window doesn't load. It only does it when the Action runs on its own.
Anyone know why this would happen?If you create an action set with just the one action and save the set upload the uploade it to the web and post a link to the .atn file we can download the action and test that on our machines. You will get feedback from both Mac and PC users. It sound odd that it would work once then fail the second time. Was Photoshop CC 2014 up before you used bridge menu tools>photoshop>batch the first time or was Photoshop started because you used tools>photoshop>batch. If is was not up did you try closing PS down before the second batch?
Maybe you are looking for
-
I am using a mac laptop with mac os x 10.6.8
-
N73 ME SERIOUS ISSUE - PLEASE HELP!!!
Hi, I have an N73 Music Edition - purchased it in Jan, 2008. It was working fine until recently I removed the memory card to clean it. Ever since my gallery doesn't show any items from the memory card. I've set my phone to save all new and downloaded
-
Graphics for Interlaced & Progressive Video.
I had started an earlier thread addressing this issue. The answer I received didn't achieve the results I was looking for so I presented the information a little better. Thank you. I am having interlacing issues producing graphics for a video destine
-
Notification classification extractor not trigger delta
I am facing the same .we have created custom data source for Notification classification using notification master data extractor(0NOTIFICATN_ATTR) but delta is not trigger for any changes in the notification line items..
-
I cannot enable my itunes, i disabled them in january now i want to enable them how
Can someone please tell me how to enable my itunes, i disabled them in January and i want to enable them