Sk17i Video streaming on WiFi problems.

andriod 2.3.4 build 4.0.2.A.0.58Flash version... Lastest.Apps with push notifcations... All disabled... well, i stopped auto snyc.Internet speed: 20mb/s Unlimited (Sky)Wifi speed: 14mb/s (using speedtest.net's app)Other devices using wifi? none.Distance: within 5 metresConnection strength 2/3 mostly 3 (3/4 if you include the circle)While using the Default browser, almost every video i try to watchquite simply doesn't.Either, it doesn't even start playing, or it plays and has to buffer every few seconds, or it plays... then crashs... etc...Other Browsers? Depends... I don't really want to have to keep jumping around different apps, so i would like a nice... alround browser. (other than playing games)but, if you can only recommend a good browser for playing videos... then sure.Note- i have used Opera, Firefox & Dolphin... none work well.I also get the error "cannot play video" or whatever it is, sometimes as well.Solutuons?Thanks,Jackjt8

Mine shows "Streaming error" for both Mobile Data and Wi-Fi connections. It used to work before, but i think after the update, it's no longer working. Can somebody shed light on this issue? It happens when you have to stream videos and the device asks you which application to use. I always choose "Video" which i always use for streaming online videos but now it's no longer working.

Similar Messages

IPad mini rewind or skip on home control center for videos in iOS8 + WiFi problem

Hi,
When I had iOS7 it was easy to skip an ad video on the websites before the main episode to watch just by opening the control center from below and by tapping the forward ">>" button it would skip the advertisement video without problems, but now with iOS 8.3 that I just uploaded because of the ugly emoji I can't skip any... I tap on this and nothing happens. Only if I press and hold it it'll go faster to the end but it's annoying on long videos, I just want to entirely skip it.
Do you guys have any solution on this?
Thank you!
P. S.: I don't know if I should open a new topic about this other issue, but when my family watches HD videos in their room (the content is from a far away country app) and "download" (not that, but it seems like they're downloading very large files, which is only watching streaming series), my iPad mini internet connection fails too much, it stops and everything weird. The Wi-Fi signal is good (three bars) because I'm freaking next to the router, but it goes very very slow because of them. I don't think it is an iOS problem (I had this on version 7 and 8.3) or anything, but I want more priority on my iPadMini than on my family's Android Samsung Galaxy S4 phone; I don't know how to fix this. They're stealing my fastness even though I'm two meters from the router and they are in the room... Is the antenna of my device worse than theirs? I contacted to my ISP and they can't do anything (bad routers without priority options). It's so sad, I thought Apple was better.

Can you guys recommend me a forum where people actually read/answer the questions?
I regret upgrading to iOS8.3; every YouTube link opens automatically in the freaking app, it's so annoying.
I knew a lot of flaws were coming by not staying in a previous version, now I blame myself for not doing it.

Problem viewing streaming video in some wifi networks, but not others

When I am at work (university), I can not view YouTube videos or video streaming from news sites such as cnn mobile on my ipod touch 2g.
<m.cnn.com/videos.jsp?ckey-cnn)06#__1_>
When I called Apple support, they had me reset-restore. I still had the problem. I went to the Apple store Genius bar and the problem no longer existed, the videaos downloaded and played from both sites!
But at my diner and at work, I get the message, "This movie could not be played" in a popup box with an OK button. The same message appears if I use the YouTube application. I click on any video, and the same popup appears. In Cnn the popup is preceded by a shaded capital Q that looks like the blue Quicktime Q; in Youtube the pupup is preceded by a YouTube icon in gray with the "Tube" surrounded by the rounded rectangle, their icoon...
At the Apple store the popup never appeared, and the videos downloaded and played.
I have no trouble playing movies I have downloaded from iTunes.
I did not have this problem when I initially got my iPod Touch, and I think it appeared after one of the last two system upgrades, but I am not sure.
I am curious that it the problem happens at two places, my diner and at work.
The speed of my wireless work network, as judged by the ipod app speed test is 9915 kbps download and 6971 kbps upload, so plenty fast.
The first time I noticed this issue was with the application "At Bat Lite" which also won't play video highlights at work.
I do not have WiFi at home
Any thoughts about what would cause this lack of functionality apparantly only at some networks but not others?
Oh, one more piece of data: at work a Macbook will play YouTube both on ethernet and using wifi...
Thanks for any thoughts or suggestions,
Paul

It seems I have two networks available at work, one is behind our firewall, and I login to it. This is the network that I can't view streaming video. There is also a "Guest" network that I don't need to login to. This one works with the YouTube and the news site videos.
Thus, I conclude there is a setting that WiFi network administrators can invoke that specifically can block streaming video on some protocols (whatever the ipod touch uses) and not others (whatever the Macbook uses). But the same router hardware supplying the Guest network does not block these protocols. Presumably this has to do with security on one side of the firewall(?)
Anyway, apparently outside of the WiFi controls available in the ipod touch settings.
Weird...
Paul

Live video stream to both Flash and iOS problem

Hi everyone, I'm Lucas. I Have learnt how to deliver a single live video stream to both Flash and iOS from this video
But after that I got a problem with the ".f4m" file and ".m3u8" file (I think) like this video below here. I don't know what happen with the server because my camera is still working perfectly.
I now using Flash Media Server 4.5
Does anyone know how to fix it?

Try this :
1: stop any stream.
2: go to root_install\applications\livepkgr\events\_definst_\liveevent and delete any .stream file that is in there
3: Go to root_install\applications\livepkgr\streams\_definst_ any livestream folder that is in there for example if you streamed with name livestream12 there should be a folder with the name livestream12, delete it.
4: Then try streaming a single bitrate stream by adding to the FMLE the following parameters
FMS Url : rtmp://localhost/livepkgr
Stream: livestream?adbe-live-event=liveevent
5: go to sample player and add this url to the field : http://localhost/hds-live/livepkgr/_definst_/liveevent/livestream.f4m
*If you have a public IP do the following :
1: go to http://www.osmf.org/configurator/fmp/#
and add this url : http://public_ip/hds-live/livepkgr/_definst_/liveevent/livestream.f4m (replace localhost with your public IP)
and from the advanced tab say that it is live.
Give it a try!

Will my phone carrier be charged for streaming video on a wifi only ipad?

Will my phone carrier be charged for streaming video on a wifi only ipad?

If you are using your phone as a hotspot for you to connect your iPad to for streaming then YOU will be charged for data... not your carrier.

I've noticed this especially when I youtube or video stream for a while. Switching between tabs takes 3-4 seconds. Definitely a memory leak! Is it a general problem or addon specific?

I've noticed this especially when I youtube or video stream for a while. Switching between tabs takes 3-4 seconds.
Definitely a memory leak! Is it a general problem or addon specific?
Also, when I try to close firefox and restart it, the process doesn'y get killed with the normal Command + Q in Mac.
I need to use Force Quit instead.

Try updating Flash. You appear to be running an older version dating from September 2010 which might be the cause of the problem. Download from http://get.adobe.com/flashplayer/
If the problem persists after updating, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

MSNBC problem with video streaming

Hi, can anyone help me with this problem : I have a DELL netbook (specs below) that works just fine. However, in order to get reasonable video quality a recent driver from Intel had to be installed. That done, most video playback and video streaming are reasonable given the cpu power of the atom processor inherent to all netbooks.
However, the MSNBC site, one of my favorites for news sports and entertainement, is really uneven in quality and sometimes unwatchable using the flashplayer 10 plugin (I use IE 6, for now). To the contrary, MSNBC also offers webcasts that open using WMP and not flashplayer and the quality is fine ! I have checked that it is neither my internet connection nor my antivirus software behind the problem.
In short, I get choppy video from the MSNBC site, with some audio delay, and I cant tell whether it's a problem from their site or the flashplayer itself.
Thanks for any suggestions
Mini 1010/Intel Atom z530/1GB Ram/Intel GMA 500/1366x768 scr./160GB drive/WXP

thanks for the answer,
but if you try with vlc this address
rtmp: //188.40.83.89:1935/vod2/mencalez1a.mp4
you will see that this streaming outside Captivate works fine.
Why it does not start in Captivate?
Any idea?
Thanks!

Video streaming issue with WiFi

Video streaming never works for the second time when WiFi is on & connected. Says "Wireless network has been disconnected. Please try again.", though it is connected well and browser works fine.
I need to do battery pull-out everytime. I'm trying to stream youtube video contents.

Yes, it does play all youtube videos but low bandwidth ones (suitable for mobile devices)

Strong wifi, poor video streaming???

Hi,
My video streaming on apps like FoxNow and SyFy keeps freezing and often quits to the home section.
The WiFi signal is strong and yet it can only play a few minutes before it freezes again.
Streaming is just fine on my MacBook Air from individual TV sites - Hulu, Fox, etc.
The apps for Fox, The CW and SyFy are the worst while NBC and HBO playback just fine.
Can anyone help?
Cheers.

Hello mikeswitzer. Welcome to the Apple Discussions!
As you have already figured out poor signal strength equals poor bandwidth performance. This, of course, will be noticeable for both audio and video streaming.
I suggest downloading a copy of iStumbler. Use iStumbler's Inspector feature (select Edit > Inspector from iStumbler's menu) to determine the Signal-to-Noise Ratio (SNR) at different points around your house, by performing a simple RF site survey. Within the Inspector, note the values for "signal" & "noise" at these locations. Start with your MacBook near the Time Capsule (TC), note the readings, and then, go to the location where you currently have the Mac Mini.
SNR is the signal level (in dBm) minus the noise level (in dBm). For example, a signal level of -53dBm measured near an access point and typical noise level of -90dBm yields a SNR of 37dB, a healthy value for wireless LANs.
The SNR, as measured from the MacBook, decreases as the range to the base station increases because of applicable free space loss. Also an increase in RF interference from microwave ovens and cordless phones, which increases the noise level, also decreases SNR.
SNR Guideline
o 40dB+ SNR = Excellent signal
o 25dB to 40dB SNR = Very good signal
o 15dB to 25dB SNR = Low signal
o 10dB to 15dB SNR = Very low signal
o 5dB to 10dB SNR = No signal
If the SNR is 20dB+ at the Mac Mini, then you should be getting reasonable performance from your TC. If less, either try to locate the source of the Wi-Fi interference or try relocating either the TC or the Mac Mini until they are within a 20dB SNR range.
Another option is to utilize a transceiver on the Mac Mini to try to increase the Mini's built-in AirPort antenna ability to pick up the signal from the TC. One vendor that provides these is QuickerTek.

Is it possible to block video streaming on iPhone 6 when not connected to wifi?

IS it possible to block video streaming on iPhone 6 when not connected to wifi?

App specific and turned off in Settings - Cellular - Use Cellular Data for
(866)

MBP Retina video streaming problems

Does anyone else have video problems anytime they stream a video online? This has persisted for awhile. I assumed it had to do with OSX Maverick, so I gave it about 6-12 months to allow any patches/updates to remedy. I would assume it is a GPU issue or possible RAM.
Also playing locally from my SSD or even an external does not give me any issues. If I stream, however, I get a glitchy, striping across my screen. Sometimes it is vertical; other horizontal. Sometimes it will last just a few seconds and pass. Other times, I have to put the laptop into hibernate and then log back in. When it happens 2-3 times in a 5 minute YouTube video, that gets really frustrating.
Lastly, this is not isolated to YouTube, but any online video streaming. Hulu, netflix, news sites, etc.
Here are some examples of how it looks:

I have been charting it recently, and I think it may be due to heat. I noticed that it reaches temperatures upwards of 80ºC. Even when rendering video that seems a bit high. I am going to download a fan control app, and set them to kick in earlier and see if that helps or at least mitigates the issue.

Serious video streaming problems (ichat and slingbox)

My 1.8Ghz SSD Macbook Air (10.5.2) doesn't seem to be able to handle even low quality video streaming. After a few of minutes of viewing, the image on the Slingplayer or from incoming ichat conference starts freezing and the laptop becomes almost impossible to control (skipping cursor movements, incredibly slow typing on ichat).
I can see what happens to the CPU thanks to Menumeters: one of the two cores stops completely (0% activity), probably to avoid excessive temperature increase.
The bottom line though is that I can't use ichat video or my slingbox (both perform very well on my other Macbook).
Is there a way to fix this?

Sounds like a heat issue that others are running into. Not good

Video Streaming problem in ios 8.2

I have recently updated my ipad air to ios 8.2 and from then on the video streaming on any of the applications installed is not working at all. Whether its the app or video streaming on safari nothing is working. I've checked youtube applications and browser version and all other video streaming sites like vimeo etc, none of them are working. I've also checked apple TV, the video streaming on that is also not working. But streaming on my desktop PC is working just fine.
I've reset configurations, I've reinstalled everything, even then its not working at all. Anybody has any solutions.
Thanks,
Puneet

‘FREAK’ flaw undermines security for Apple and Google users, researchers discover - The Washington P…

Airport wifi problems with uverse and gigabit switch resolved

I think there is a bug in airport firmware 7.6 with how spanning tree works in addition to problems with the Uverse router. Having an Airport with a uverse 2wire 3801 and gigabit switch will not work. Putting the extreme in NAT mode with DMZ plus behind the uverse resolved the problem.
Network configuration:
Uverse 2wire 3801 router
    3801 provides prioritization for upstream traffic so skype and VoIP work better when doing a lot of stuff on Internet
Airport extreme firmware 7.6
two airport express 802.11n hardwired to extreme. Set up in bridge mode. All access points have same SSID "create a network" to enable roaming. Ignore anything to do with extending a network. firmware 7.6
two gigabit switches
    Netgear GS608 - 8 port gigabit switch
    Trendnet TEG-S80g - 8 port gigabit switch
    100BT 5 port switch - did not figure into problem
Three Uverse set top boxes wired on Ethernet. They have to be wire directly to the 2wire box to work correctly. See: http://forums.att.com/t5/Features-and-How-To/At-amp-t-U-Verse-modem-setup-Airpor t-Extreme/td-p/2300785
However, you need to be careful to place your own PCs and other internet devices on the network created by your gear (airport extreme in your case), but keep AT&T's set top boxes for the IPTV services IN FRONT of your own router - so they remain on AT&T's provided network.
So it would work like this ...
Network 1: 2wire RG (4 lan ports) -> Any Set tops, and to the WAN port on your AirportExtreme
Network 2: Airport Extreme LAN ports -> to any computers or internet devices (but not AT&T set top boxes).
The RG prioritizes the traffic for your Uverse Voice and your Uverse TV ahead of internet data traffic, as it rationalizes data heading out of your home. If you place your own equipment in that equation (like putting AT&T set top boxes behind your Airport Extreme) the performance and function of your AT&T set top boxes could really flake out on you.
Symptom:
    Everything would be working fine, then intermittently all my wifi access points would stop working. ~6,000 ms latency, dropped packets. Ethernet worked fine. Here is an example of my macbook pinging the extreme when associated with the extreme over wifi with a strong signal.
ping: sendto: Host is down
Request timeout for icmp_seq 23
Request timeout for icmp_seq 24
64 bytes from 192.168.1.64: icmp_seq=25 ttl=255 time=267.051 ms
Request timeout for icmp_seq 26
Request timeout for icmp_seq 27
Request timeout for icmp_seq 28
64 bytes from 192.168.1.64: icmp_seq=26 ttl=255 time=3402.599 ms
Request timeout for icmp_seq 30
Request timeout for icmp_seq 31
Request timeout for icmp_seq 32
64 bytes from 192.168.1.64: icmp_seq=30 ttl=255 time=3060.673 ms
64 bytes from 192.168.1.64: icmp_seq=34 ttl=255 time=24.115 ms
64 bytes from 192.168.1.64: icmp_seq=35 ttl=255 time=31.056 ms
64 bytes from 192.168.1.64: icmp_seq=36 ttl=255 time=39.828 ms
Root cause:
    It looks like the 2wire 2801 router has a problem with spanning tree when interoperating with gigabit switches and airports. There is interplay with the airport.
I did not have this problem until the 7.6 airport firmware. I had been using the Netgear hub for about a year with the extreme in bridge mode. I added the Trendnet hub and upgraded airport firmware at the same time which made fault isolation difficult.
Problem recreation:
Set up airport expresses hard wired to extreme
Connect gigabit switch anywhere to network
Everything OK
Dettach one computer from wifi then reattach, then all wifi stops working. It takes a few seconds for the problem to propagate.
Ethernet still works fine
Problem Resolution:
Connect to 2wire with ethernet
Set 2wire route to have subnet as 192.168.2.x
Set extreme in NAT mode behind 2wire. It will complain about double NAT. Override the warning. Set the subnet to 192.168.1.x so you don't have to change any static IP addresses. Note that 2wire uses 192.168.1.254 as default route whereas airport uses 192.168.1.1.
I set DHCP to start at .10 to leave the lower addresses for assigning static IP addresses to computers I want to expose outside the firewall.
Go into firewall settings. Select airport extreme. Select the bottom setting which is "DMZ Plus". When you go into the airport extreme settings, you will now see that it has the uverse public IP address on its WAN port. NAT port mappings work fine on the extreme behind the 2wire router.

Keeping this very short here is a summary of the actual problem and solution to allow your Apple Airport Extreme to run in Bridge mode on the same subnet as your uVerse settop boxes (if your Layer 2 switch is configurable).
Devices: Uverse, Cisco SG300, and Airport Extreme
uVerse uses Multicast to broadcast video streams between the uVerse network to the settop box, and from settop box to settop box.
X number of Multicast Groups are created based on X number of settop boxes you have. You can see the multicast definitions by logging into the webinterface of the iNid. Each settop box is a member and can choose to display a broadcasted TV stream or not.
Multicast membership is setup by the use of ICMP messages for IPv4 (MLD for IPv6). Each of the settop boxes become members of each others multicast group by reporting up to the iNid (MultiCast Proxy).
In an ideal world a layer 2 switch will track these memberships and only forward a broadcast packet to the ports on the switch to which the settop boxes are connected to. The switch would do these via snooping on the ICMP packets. Most switches by default do not do this by default and simply forward the broadcast packett out every one of it's switch ports.
Here in lies the problem. Problem is that the Apple AES doesn’t do ICMP snooping / filtering and floods the wireless network with these broadcast streams.
In order to fix this you must turn on ICMP snooping and filtering on the switch (or buy a switch that does this). I have a Cisco SG300 and list out the configuration below.
Other notes:
Ensure that all Media renderers (settop boxes) and servers are wired directly off the switch and not attached to any of the Airport Express ports. This way no media transverses the Airport (only control point traffic goes through the WiFi - which is fine). Obviously if the IGMP snooping switch sees any client requesting Multicast streaming traffic on the same port as the WAP, it will add that Multicast address to the forwarding table for that port, and then, yes it could get flooded.
Remember, you need to allow some Multicast traffic through your WAP to allow UPnP discovery to work (assuming that you will be using Wireless control points.)
Read the Multicast chapter in the SG 300 switch Admin Guide as it explains things very well.
Setting up multicast on the SG300s using the WebUI:
1. Multicast/Properties/
Tick enable Bridge Multicast Filtering Status for VLAN 1, and
set the Forwarding Method to IP Group Address for both IPv4 & IPv6.
2. Multicast/ IGMP snooping/
Tick enable IGMP snooping status then select and edit the entry and ensure that IGMP querier status is ticked.
It's essential for IGMP snooping to work that there must be at least one active IGMP querier on the network - if more than one is enabled, they will carry out an "election" to decide which one should be active (normally the one with the lowest IP address.)
3. Multicast Router Port
Set whichever port that is connected to the uVerse iNid to Status which means that it the uVerse router connected to this port is the Multicast Router
4. Multicast/ Unregistered Multicast
set all ports to Filtering. (The default is Forwarding.)
There are a lot of other variables within all the above - the defaults are OK, you should probably leave them alone!
In the config file you would then expect to see the above appearing as something like this:
ip igmp snooping
ip igmp snooping vlan 1
ip igmp snooping vlan 1 immediate-leave
interface vlan 1
bridge multicast mode ipv4-group
bridge multicast ipv6 mode ip-group
interface range gi1-10
bridge multicast unregistered filtering
ip igmp snooping vlan 1 querier
ip igmp snooping vlan 1 querier address <IP-Addr>

Apple TV video streaming issue with EA4500

I am facing issues with my router EA4500 and my apple TV. When I am watching a video from my itunes library at my PC, sometimes stop palying waiting to receive data. Is that a way to conect my apple tv to my router to prioritize this video streaming from my PC to apple TV? Can someone help me? Do you have the port list for Apple TV?

I'm sorry if I confused you! Regarding the firmware version you currently have (2.0.37.131047) it shows that you are using the Classic firmware in which we would suggest that you upgrade it using the Linksys Smart Wi-Fi Firmware. This Linksys Smart Wifi uses the latest firmware for your router that might help you fixed your problem. Click this link below where you can download the new firmware for yor
router. http://homesupport.cisco.com/en-us/support/routers/EA4500----Can you tell me what version of apple tv you have? If your Apple Tv happens to be dual band then I would suggest that you connect to the 5ghz network because it can give you better video streaming capability. Yes you can choose which device you want to connect to the 2.4 or 5 ghz as long that device/s is dual band.

Sk17i Video streaming on WiFi problems.

Similar Messages

Maybe you are looking for