Skateboard videoagrapher, any out there, need help
I'm looking for a skate video guy that can answer some questions, any out there?
Do a time lapse of a whole group painting a graffiti of JOEY BONDI on a brick wall. Intercut it with POV footage.
Duct tape the camera to Joey's Helmet, and intercut that with the Graffiti. At the end of the sequence have your son take the helmet off, turn it around, and Mug for the camera, maybe even introduce himself.
Do green screen of the letters of the name written with different colored sharpies (not Green!) on cardboard or newpaper or the pages of a skate magazine. Crumple up the letters gradually. Run the result backward a 1000% (or more) so the letters reveal from the crumpled paper. Chroma key these letters over the POV footage of your camera smashing into the wall at the bottom of the hill to signal the end of the title sequence.
Or just fire up LiveType and Motion, and play with textures and fonts and effects and filters. Listen to the music you will be cutting to while you work in the graphics applications.
Best of luck and have fun.
Tom
Similar Messages
-
i am having the problem in my 3gs iphone. it says it shouldnt take more than 3 minutes then i get this message Could not activate iphone.
i have taken the sim card out and put it back in even then its of no use.
if any one out there can help us it would be very nice of them. thank you for your time.I can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
Yes, my friend unlock the phone to use with Rogers but I don't know where -
Hi on MAC OSX 10.7.4 update on Aperture 3.3.1 has been done, still gget the error message "By opening the databank for the Mediathek „~/Pictures/Aperture Library.aplibrary“ is an error" is anybody out there to help me?
Alex,
did you just upgrade from an Aperture 3.2.x version to Aperture 3.3.1? This error message usually occures after the upgrade to 3.3.1, when Aperture cannont convert the library format to 3.3. format.
I'd try to repair the Aperture Library (Mediathek), before upgrading it. Hold down the option-command key combination (⌥⌘) while double-clicking Aperture. This will bring the "Aperture Library First Aid Tools" panel forward. Select "Rebuild Database" and see, if it will resolve the the problem.
Good luck
Léonie -
why i can not use the ink 650 in the 3515 hp eprint?somebody out there to help me please??
Hi @ronjhay ,
Thank you for taking the time out of your day to ask that question on the HP Forums today!
I am having a bit of trouble understanding exactly what it is that you are asking, I apologize. Are you trying to use the number 650 ink cartridge in the printer? And it isn't fitting and you are asking why it isn't?
Please clarify. Look forward to hearing back from you!
I worked for HP. -
i locked myself out of my ipod and i tryed unlocking it and then the "ipod is disabled" remark shoowed up. I knew what to do to restores it but in the last one minute of restoring a message popped up and said something about it cant finish it and the connectioned timed out. I tried this at my buddies house and it did the same. Ieven my freind (whos very good in electronics and computers) couldnt do it, i need help is there anyway possible?
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete. -
Hi there, need help for this program...thx!
Hi there guys,
I have created this applet program that requires a user to login with a user no, and a password. I am using arrays as to store the defined variables,(as required by my project supervisor). My problem here is that when the arrays are declared in class validateUser(), the program would run fine, but i cant login and i get a NullPointerException error. if the arrays are located in actionPerformed, i get a 'cannot resolve symbol' error for the method 'get' and 'if (Admin.equals(admins.get(i).toString())) ' as well as 'if (Password.equals(passwordsget(i).toString())) '. I am not very effecient in java, hence the untidy program (and i have to admit, it isnt any good), so sorry for any inconvenience caused. Once agani thx in advance ;)
here are my codings :
import java.applet.Applet;
import java.awt.*;
import java.awt.image.*;
import java.awt.event.*;
import java.io.*;
import java.net.URL;
import java.net.*;
import javax.swing.*;
import java.lang.*;
import java.util.Vector;
public class eg31662 extends Applet implements ActionListener
Panel panel1, panel2, panel3, panel4, panel5;
Button login, enter;
Label inst, top, admin, pass, fieldlabel;
TextField adminF, passF, field;
String Admin, Password;
Vector admins, passwords;
Thread thread = null;
boolean status = false;
public class validateUser extends Applet
String[] admins = {"User1", "User2", "User3"};
String[] passwords = {"P1", "P2", "P2"};
public void init()
setLayout (new BorderLayout());
panel1 = new Panel(new FlowLayout());
panel2 = new Panel(new FlowLayout());
//login button
login = new Button("Login");
//instruction
inst = new Label("Please type in your User no. and the given password in order to proceed");
//label
top = new Label("Login login");
admin = new Label("Admin No :");
pass = new Label("Password :");
//input textfields
adminF = new TextField(8);
passF = new TextField(10);
passF.setEchoChar('*');
panel1.setBackground(Color.gray);
panel2.setBackground(Color.orange);
panel2.add(admin);
panel2.add(adminF);
panel2.add(pass);
panel2.add(passF);
panel2.add(login);
panel2.add(inst);
panel1.add(top);
add(panel1, BorderLayout.NORTH);
add(panel2, BorderLayout.CENTER);
login.addActionListener(this);
setSize(500,400);
void mainpage()
boolean flag = true;
setLayout (new BorderLayout());
panel1 = new Panel(new FlowLayout());
panel2 = new Panel(new FlowLayout());
top = new Label("Welcome");
enter = new Button("Enter");
panel2.setBackground(Color.orange);
panel1.setBackground(Color.gray);
fieldlabel = new Label("Type something here :");
field = new TextField(20);
add(panel1, BorderLayout.NORTH);
add(panel2, BorderLayout.CENTER);
panel2.add(fieldlabel);
panel2.add(field);
enter.addActionListener(this);
public void start() {
if(thread == null) {
status = true;
public void stop() {
status = false;
public void run() {
while(status == true) {
try {
thread.sleep(50);
catch(InterruptedException ie) {
repaint();
thread = null;
public void actionPerformed(ActionEvent ev)
//String[] admins = {"User1", "User2", "User3"};
//String[] passwords = {"P1", "P2", "P3"};
if(ev.getSource() == login)
Admin = adminF.getText();
Password = passF.getText();
boolean ok = true;
for (int i = 0; i < admins.size(); i++) {
if (Admin.equals(admins.get(i).toString())) {
if (Password.equals(passwords.get(i).toString())) {
ok = true;
this.setVisible(false);
//break;
JOptionPane.showMessageDialog(null, "Welcome, u have successfully logged in");
mainpage();
else {
ok = false;
else {
ok = false;
if (ok == false) {
JOptionPane.showMessageDialog(null,
"Incorrect Password or Admin No, Please Try Again",
"Access Denied",
JOptionPane.ERROR_MESSAGE);
else {
this.setVisible(false);
}Hi, sorry to bring this thread up again, but this is actually a continuation from my previous posted program. Hope u guys can help me again!
Right now i'm supposed to come up with a simple quiz program, which consists of the center panel displayin the question (in a pic format), and a textfield to enter the answer at the lower panel. this goes on for a couple of pages and once it is completed, the final page would display the total correct answers out of the number of questions, as well as the score in percentage form.
The few(or many) problems taht i'm facing are :
1)How do i save the answers that are typed in each textfieldAnd later on checked for the correct answer based on the array given?
2)How do i go about doing the final score in percentage form and total of correct answers?
3)I previously tried out using canvas, but it didnt seem to work. my questions(pictures) that are supposed to displayed in the center(canvas) produce nothing. How do i rectify that?
i'm really sorry for the mess in the codings, hope this wouldnt be a hassle for any of u out there. Once again thanks in advance!
import java.applet.Applet;
import java.awt.*;
import java.awt.event.*;
import java.awt.image.*;
import java.io.*;
import java.net.URL;
import java.net.*;
import java.util.Vector;
import javax.swing.*;
import java.awt.image.*;
import java.lang.*;
import java.awt.Graphics;
public class eg31662 extends Applet implements ActionListener
Panel panel1, panel2, panel3, panel4, panel5;
Button login, enter;
Label inst, top, admin, pass, startLabel;
TextField adminF, passF, field;
String Admin, Password;
Vector admins, passwords;
//Quiz declarations
TextField ansF1,ansF2,ansF3;
Button startBut, next0, next1, finishB, previous1;
Image q1, q2, q3;
Image ques[] = new Image[2];
boolean text = false;
boolean checked = false;
int correct = 0;
String [] answer = new String [2];
String [] solution = {"11", "22", "33"};
boolean text = false;
boolean sound = true;
int red,green,blue;
int question =0;
int good = 0;
boolean pause= false;
boolean start = true;*/
Thread thread = null;
boolean status = false;
public void init()
validateUser();
setLayout (new BorderLayout());
panel1 = new Panel(new FlowLayout());
panel2 = new Panel(new FlowLayout());
panel3 = new Panel(new FlowLayout());
//login button
login = new Button("Login");
//instruction
inst = new Label("Please type in your UserName and the given " +
"password in order to proceed");
//label
top = new Label("Top Label");
admin = new Label("User Name :");
pass = new Label("Password :");
//input textfields
adminF = new TextField(8);
passF = new TextField(10);
passF.setEchoChar('*');
panel1.setBackground(Color.gray);
panel2.setBackground(Color.orange);
panel3.setBackground(Color.gray);
panel2.add(admin);
panel2.add(adminF);
panel2.add(pass);
panel2.add(passF);
panel2.add(login);
panel3.add(inst);
panel1.add(top);
add(panel1, BorderLayout.NORTH);
add(panel2, BorderLayout.CENTER);
add(panel3, BorderLayout.SOUTH);
login.addActionListener(this);
setSize(500,400);
private void validateUser()
String[] adminData = {"t", "User1", "User2", "User3"};
String[] passwordData = {"t", "P1", "P2", "P3"};
admins = new Vector();
passwords = new Vector();
for(int j = 0; j < adminData.length; j++)
admins.add(adminData[j]);
passwords.add(passwordData[j]);
private void Mainpage()
boolean flag = true;
removeAll(); // remove all components from container
panel1 = new Panel(new FlowLayout());
panel2 = new Panel(new FlowLayout());
panel3 = new Panel(new FlowLayout());
top = new Label("Welcome");
enter = new Button("Enter");
panel2.setBackground(Color.orange);
panel1.setBackground(Color.gray);
panel3.setBackground(Color.gray);
startLabel = new Label("Welcome! " +
"Please click on the 'Start' button to begin the quiz ");
startBut = new Button("Start");
startBut.requestFocus();
Dimension dim = getSize();
startBut.setSize(50,20);
add(panel1, BorderLayout.NORTH);
add(panel2, BorderLayout.CENTER);
add(panel3, BorderLayout.SOUTH);
panel2.add(startLabel);
panel2.add(startBut);
startBut.addActionListener(this);
validate();
repaint();
private void Quiz1()
//quizCanvas = new Canvas();
boolean flag = true;
removeAll(); // remove all components from container
panel1 = new Panel(new FlowLayout());
panel2 = new Panel(new FlowLayout());
panel3 = new Panel(new FlowLayout());
panel1.setBackground(Color.gray);
panel2.setBackground(Color.orange);
panel3.setBackground(Color.gray);
add(panel1, BorderLayout.NORTH);
add(panel2, BorderLayout.CENTER);
add(panel3, BorderLayout.SOUTH);
q1 = getImage(getDocumentBase(), "1.gif");
ques[0] = q1;
//ques[1] = q2;
//previous = new Button("<");
next0 = new Button("Done");
ansF1 = new TextField(25);
next0.addActionListener(this);
//quizCanvas.insert(ques1);
//panel3.add(previous);
panel3.add(next0);
panel3.add(ansF1);
//panel2.add("1.gif");
ansF1.requestFocus();
ansF1.setText("focussing");
validate();
repaint();
public void Quiz2(){
boolean flag = true;
removeAll(); // remove all components from container
panel1 = new Panel(new FlowLayout());
panel2 = new Panel(new FlowLayout());
panel3 = new Panel(new FlowLayout());
panel1.setBackground(Color.gray);
panel2.setBackground(Color.orange);
panel3.setBackground(Color.gray);
add(panel1, BorderLayout.NORTH);
add(panel2, BorderLayout.CENTER);
add(panel3, BorderLayout.SOUTH);
q2 = getImage(getDocumentBase(), "2.gif");
ques[1] = q2;
next1 = new Button("Done");
ansF2 = new TextField(25);
next1.addActionListener(this);
panel3.add(next1);
panel3.add(ansF2);
ansF2.requestFocus();
ansF2.setText("focussing");
validate();
repaint();
public void Quiz3(){
boolean flag = true;
removeAll(); // remove all components from container
panel1 = new Panel(new FlowLayout());
panel2 = new Panel(new FlowLayout());
panel3 = new Panel(new FlowLayout());
panel1.setBackground(Color.gray);
panel2.setBackground(Color.orange);
panel3.setBackground(Color.gray);
add(panel1, BorderLayout.NORTH);
add(panel2, BorderLayout.CENTER);
add(panel3, BorderLayout.SOUTH);
q3 = getImage(getDocumentBase(), "3.gif");
ques[2] = q3;
finishB = new Button("Finish");
ansF3 = new TextField(25);
finishB.addActionListener(this);
panel3.add(finishB);
panel3.add(ansF3);
ansF3.requestFocus();
ansF3.setText("focussing");
validate();
repaint();
public void start() {
if(thread == null) {
status = true;
public void stop() {
status = false;
public void actionPerformed(ActionEvent ev)
boolean ok = true;
if(ev.getSource() == login)
Admin = adminF.getText();
Password = passF.getText();
for (int i = 0; i < admins.size(); i++) {
if (Admin.equals(admins.get(i).toString())) {
if (Password.equals(passwords.get(i).toString())) {
ok = true;
JOptionPane.showMessageDialog(null,
"Welcome, u have successfully logged in");
Mainpage();
break;
else {
ok = false;
else {
ok = false;
if (!ok) {
JOptionPane.showMessageDialog(null,
"Incorrect Password or Admin No, Please Try Again",
"Access Denied",
JOptionPane.ERROR_MESSAGE);
if(ev.getSource() == startBut)
Quiz1();
if (ev.getSource () == next0) {
saveanswer();
Quiz2();
if (ev.getSource () == next1) {
//saveanswer();
Quiz3();
if (ev.getSource () == finishB) {
//saveanswer();
//checkanswer();
/*class quizCanvas extends Canvas {
private Image quest;
public quizCanvas() {
this.quest = null;
public quizCanvas(Image quest) {
this.quest = quest;
public void insert(Image quest) {
this.quest=quest;
repaint();
public void paint(Graphics g) {
public void checkanswer() {
if (!checked) {
/*question = 0;
for (int a=1;a<16;a++) {
question++;*/
if (ansF1) {
if (answer[1].toUpperCase().equals(solution[1])) {
correct++;
if (ansF2) {
if (answer[2].toUpperCase().equals(solution[2])) {
correct++;
if (ansF3) {
if (answer[3].toUpperCase().equals(solution[3])) {
correct++;
checked = true; }
public void saveanswer() {
if (text) {
if (!ansF1.getText().equals("")) {
answer [Quiz1] = ansF1.getText();
//answer2[question] = tf2.getText();
if (!ansF2.getText().equals("")) {
answer [] = ansF2.getText();
if (!ansF3.getText().equals("")) {
answer [] = ansF3.getText();
} -
Thunderbolt docks for external video cards. Any out there?
I am finally retiring my Mac Pro 1,1 for a stacked i7 Mac Mini. The only downside to the Mini is the onboard Intel HD Graphics 4000. I've already upgraded to the ATI Radeon HD 5770 and would like to keep that power.
To that end, I've been looking for a Mac-compatible Thunderbolt-enabled external graphics dock. Across the web, I've read about upcoming products from LucidLogix, MSI (GUS II) and Village Instruments (ViDock), but none of these seem to be available to market. I also realize that there are a lot of docks that could be used with a PCIe to Thunderbolt adapter, but that just seems like a costly pain.
Any good solutions out there?You should check out the Silverstone T004. It can supply up to 450 watts to a graphics card and will cost between $200 and $300. Of, course I'm hoping for the $200 price.
I emailed a Silverstone representative and he said that they're hoping to be able to release it in the first quarter of 2014.
http://www.computershopper.com/computex-2013/diy-external-laptop-graphics!-compu tex-2013-preview-of-the-silverstone-t004-thunderbolt/silverstone-t004-external-t hunderbolt-graphics?thisSpeed=30000#slm -
Any hope, i need help fast
ok just this morning i want to update my iphone from OS2 to OS3 and during that time i went to watch tv, but when i came back this happens
http://i391.photobucket.com/albums/oo358/absolutezeromax/IMG_0057.png
it tells me to connect to itunes, but i done it many times and ditunes just keep saying
"you iphone have error
the device is not regonized, unable to prompt service" or something like that, at least i translate back to enlish (i am brazilian)
so i checked out the recovery tut but it wont work (this should reverse back to OS2)
i tried to remove the batteries, sim card still wont work
i tried to reinstall itunes thinking its the programs problem it still wont work
i restarted both the iphone and the computer dozens of times
i use the diagnosis on itunes and its working fine
so i need help fast plzzzzzzzzzzz!!!!yea i did follow a tut
1.turn off phone
2.hold home button
3.connect to itunes
4.keep holding
then it went into recovery mode but after that it just become that screen again -
Running out of file space on my macbook air and can't seem to make space by deleting old emails/files etc. Have been told by iyogi to purchase a mac tune up for £49.99. Do i need this or can i clean up another way that will not cost me? I have the smallest memory macbook and need to free up some space.
The new Apogee Duet for iPad and Mac, is compaible with iOS devices and includes a USB Midi input. This sounds like the perfect solution for your workflow.
-
I have an iPad 4.3 and have not been able to upgrade to I os 5 or 6 operating system. Does anyone have instructions?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
I am not having a lot of success in getting Ical working correctly. Is there a good tutorial on the web that I can find that explains Ical in depth, something that makes the whole process really easy?
Regards
PhilI am making good progress with the tutorials you suggested.
How ever I have another question for you.
On the left side there is 3 headings, they are On My Mac
[email protected] &
Subscriptions
When I import my monthly flying roster from work it is dumping it into a calender called Home under the heading :ON MY MAC
I want it to be under [email protected]
I have tried dragging it down but that does not work -
HI there, need help in thinking of a logic.
Good Day!
I'm having trouble thinking of the logic in this simple (but tediously hard for me) problem.
I've got two internal tables, say table A and table B. I need to output records from table A that do not match records from table B. and vice versa.
The thing is, before I can output them, there are 3 primary keys for each table. let's say, ID, Document, and date. I need to match 3 of them to the other table, and if they don't match I would have to print them out.
What I did was.
Loop at TABLEA.
Loop at TABLEB.
IF TABLEA-ID NE TABLEB-ID AND ...
WRITE TABLEA-ID ...
ENDIF.
ENDLOOP.
ENDLOOP.
The problem is, let's say table a has
ID: 0
Doc:1
Date: 1
ID:1:
DOC:1
DATE:1
table b has
ID:1
DOC:1
DATE:1
and so on..
the loop will first compare table a with b and if it doesn't match well.. it prints it out immediately. Maybe the 1st record of table A is in the 20th record of table B. So I get multiple unmatches. So now I'm turning to the experts here, hope you guys can help.
I'm not sure if there was a faster way to do this. Any suggestions would be appreciated.
Edited by: Katrina Dy on Jul 2, 2008 8:56 AMHello
sort tablea by ID Document date.
sort tableb by ID Document date.
loop at tablea.
read tableb with key ID = tablea-ID
Document = tablea-Document
date = tablea-date
binary search.
if sy-subrc NE 0.
write: tablea-ID, ...
endif.
endloop.
loop at tableb.
read tablea with key ID = tableb-ID
Document = tableb-Document
date = tableb-date
binary search.
if sy-subrc NE 0.
write: tableb-ID, ...
endif.
endloop. -
The best part is that the 5 duplicates don't even have any contact info. And all my lovely folders .....where are they now? I think it had something to do with switching companies and my last iPhone had been linked to their exchange account.
But my contacts....many completely gone, many i see over and over again as I scroll to find the real person I wanted to talk to with reminders x 4 of the past. But seriously - my favorites, my calendars. There HAS to be a way to recover my phone book and calendar. And while we are on the subject ... *** with iTunes duplicating my music and then a bunch of stupid icons like they cant find my music? I didn't delete the files....Now I'm listenting to "So Yummy for my Tummy" and rockin out with my kids.
First time here and while I genuinely would welcome/appreciate/beg for any solutions I do feel a little better getting all this off my chestdecided to get at least 1 reply.. seriously sitting here hoping somebody can just offer some glimmer of hope. Im scarred the best scenario would be me deleting duplicates manually for days (as I have done in the past) but it doesnt really solve the problem or help me to have contacts in grouped folders. Anything?
-
Delete row option doesn't work and then becomes greyed out. Need help troubleshooting.
Hello!
I'm hoping that someone can please help me troubleshoot an issue I'm having with a table in my form. It has a menu associated with each row that allows you to add, delete, reset, etc. rows. The name of the table on the form is the Purchase Items table. It's the first table on the form.
Here are the steps to recreate the issue:
1. Create 3 rows in the table
2. Click the menu ("X") button associated with the first row.
3. Select "Delete this row". Nothing happens.
4. Click the menu ("X") button associated with the first row.
5. Select "Delete this row" again. Nothing happens.
6. Click the menu ("X") button associated with the first row. You'll notice that the "Delete this row" option is greyed out.
My best guess that the rows are being deleted in the background which would explain that if I have 3 rows, and "delete" 2, that my delete option is then greyed out because I believe there is logic in there such that if there is only 1 row then grey out the option to delete rows. I was planning to attach the file as I have seen others do but don't see the option. I'm happy to provide the file via email if that's easier. Thank you in advance!
SaskiaI've posted the solution here:
http://www.fieldeffecttechnologies.com/AdobeForums/PCard.pdf
The instance manager methods were being given the wrong index of the row to work with. They need to be passed the index for the row that the button you are pressing is in (of course). Instead they were given some v8b index, which I honestly cannot decipher as to what that number possibly means. (Math.round((v3-v4)*v6........)???
Anyways, I fixed it up and also changed some of the logic in the sub menu to determine what's greyed out.
I like that feature! Might even show it to a client!
Kyle -
I am having a problem deleting rented movies. One shows up as a grey box. Apparently it never downloaded. Plus two more that I have watched are still there. Any suggestions.???
This is a user to user help forum only. You are not addressing Apple here.
My iPhone 4S, iPhone 5, and iPad 2 are running 6.1.3 with no such problem and the same with the overwhelming majority of iOS devices running 6.1.3.
Maybe you are looking for
-
Installing on Drive Other then C:
I've done some research on this and it seems it's not possible but I'm going to ask any way to get official clarification. I have an SSD (C:) drive and I don't want my Creative Cloud on that drive I rather have it on the 300GIG K drive I have. It wo
-
Drop down menu created in Fireworks MX doesn't work in IE 10
I have a website which was designed using Dreamweaver and Fireworks MX. The drop down menu on the site has been working well for many years but no longer works in Internet Explored 10 (although it still works in IE9). The main menu is still visible
-
Synchronization of the lyrics on iPhone
Hi everybody! I have a problem with the synchronization between iTunes and my iPhone3GS....I inserted the lyrics in some songs of my library but, after the synchronization, when I play the song on the iPhone there's no text. Can somebody help me?
-
I choose my homepage but it won't stay that it goes to a default i-mesh homepage how do I resolve
How do I keep one homepage that I choose?
-
HELP I Need Help With Photoshop CS5
I have CS% for school. I have Photoshop 64 bit. Every time I open Photoshop to do an assignment it crashes. I have talked to other people who are experiencing the same thing with 64 bit. Everyone I have spoken to with 32 bit seems to be doing fine. A