SKF posting statistical

Dear All,
I read the below in forum :
SKF is not a real cost object , it carries statistical posting only =so it solely for reporting and analysis. Hoewev activity type is use for cost allocation from one cost object to another. Activity type for example No of Employee, Production hr whcih we can use to charge production over head to production order.
Now my question is how can it be considered as statistical? As I use SKF as tracing factor to do allocation via cycle and the cost is transferred from sender to receiver.
So how can it be statistical and only for reporting and analysis? It has COST transfer.
Please advise.
Thanks
Moderator: SKF is not a cost object at all (real or statistical). Please, read help.sap.com for basic concepts

hi,
thanks.
i do know SKF is not a cost object.
i just would like to know why it is saying statistical and why it is saying for reporting but activity type is not.
As I use SKF as tracing factor to do allocation via cycle and the cost is transferred from sender to receiver.
So how can it be statistical and only for reporting and analysis? It has COST transfer.
so why it is saying statistical and reporting?
thanks

Similar Messages

  • Why SKF posting is statistical

    Hi,
    I read the below in forum :
    SKF is not a real cost object , it carries statistical posting only so it solely for reporting and analysis. However activity type is use for cost allocation from one cost object to another. Activity type for example No of Employee, Production hr whcih we can use to charge production over head to production order.
    Now my question is how can it be considered as statistical? As I use SKF as tracing factor to do allocation via cycle and the cost is transferred from sender to receiver.
    So how can it be statistical and only for reporting and analysis? It has COST transfer.
    Please advise why it is saying that SKF is statistical.
    Thanks

    hi,
    thanks.
    i do know SKF is not a cost object.
    i just would like to know why it is saying statistical and why it is saying for reporting but activity type is not.
    As I use SKF as tracing factor to do allocation via cycle and the cost is transferred from sender to receiver.
    So how can it be statistical and only for reporting and analysis? It has COST transfer.
    so why it is saying statistical and reporting?
    thanks

  • Post Statistical Dunning Charges

    Hi:
    How do I post statistical dunning chargers? I try to post 2 dunning chargers but when I run transaction FPVA and FPVB the post of those chargers are real. I follow all the configuration lines for dunning but I don´t see a parameter related for statistical chargers; I only see a parameter for statistical interest.
    Regards,
    Joe

    Hi Bill:
    I look for this table but I don´t find in the system. I think there is a misspelling.
    Regards,

  • CO posting statistical (11) and actual (04)

    Hi all
    Normally, when you post in CO with two or more objects one item is witten as actual the others as statistical, and nomrally is the cost center to be written as statistical. Example for a posting with cost center and internal order, the cost center go as 11 and the IO as 04, happen the contrary only if the IO is created has statistical in own master data.
    Exist the possibility to mark as statistical other CO objects (example cost objects)?
    Second case and real problem: one of user open as revenue element a account at place to open it as cost element, so all the posting done over it, create a CO-PA line as actual and cost center line as statistical. I have already correct for the next year the account, but I cannot make it for this year becuase I have already some postings. Exist a mode for correct the problem? or at least to froce the cost center line as actual?.
    Thanks.
    Davide

    Ok, thanks.
    Last question: I saw also projects can be opened as statistical: we don't use PS module in our company in controlling, but I need a third "dimension" in CO for analysis  of expenses (now we use cost center (actual) and IO (statistical) , profit center is used but for other analysis). I thought about the cost objects but if they must be actual this is not good. Exist problems to use the projects, opening it only as master data (statistical), to set in the FI postings for make CO reporting?
    Davide

  • How to post statistical conditions to accounting ?

    Hi SD Gurus
    Our client requirement is that the net value is posted to two GL accounts i.e., 10% of net value is to be posted to one GL account and 90% of net value is to be posted to one GL account.
    In my pricing procedure net value is determined in 700 STEP so i defined two condition types in 800 and 820 types and had taken the value as 700 step as reference and in the pricing procedure the two condition types r working well but the net value showing double i.e., it was adding the value in 800 step and 820 step with 700 step value. in order to rectify that what configuration steps I have to do.I need the solution very urgent.
    When i make the condition types in 800 and 820 steps as statistical, i am unable to post to accounts. 
    Please suggest.
    Cheers,
    "CLN"

    Dear Chakravarthy
    In your Pricing Procedure, insert a field between Steps 700 and 800 and define it as "Sub Total".  Against this new step, enter "700" in both "From" and "To" field and try.
    Meanwhile, if you want any condition value to be posted to accounting, you have to untick the respective condition types.  Then only, it will flow to accounts.
    Thanks
    G.Lakshmipathi

  • Can we post statistical entries in fi part

    Dear Members,
    Can we post statistica entries in financial accounting.
    if so may i know when or purpose of such postings.
    Thank U.

    hi,
    We Can Post entries which don't have any financial effect. Such as Down Payment Request. F-37/F-47. they are also called as NOTED ITEMS.
    hope its useful.
    Regards,
    R.Ramakrishnaraj

  • Stock is increased and FI entry is posted in statistical GR for third party

    Hello
    I was trying to activate the functionalty for statistical GR in third party but STUCK due to following issues. For enabling this functionaltity I have checked "Goods Reciept" and "GR Non-Valuated" check in "Delivery tab" of PO.
         1. After creating Statistical GR through MIGO (101), stock has been posted in plant. I was expecting no movement in Stock .
         2. I was hoping there should not be in FI posting but FI entry is posted through statistical GR .
    We are using third party process from many years but without statistical GR. Requirement from client is to post statistical GR without FI entry and no stock should be updated. Please advise if anyone has idea on this.
    FYI--We have item category TAS and schedule line category CS in customisation. Also advise if above two settings in PO are enought to turn ON the statistical GR functionality.
    Thanks for your help.
    Regards
    Arvind

    Thanks AKPT for reply
    As advised , pleae find enclosed screens for OMS2, PO and FI entry. FI entry might be wrong as while posting MIGO ..I was getting error "WE etnry is missing in table YFTFI_SUBST236 and I maintained some dummy GL accounts.
    Regards
    Arvind

  • Statistical WBS element posting - Asset

    Hi,
    From the SAP help on AS03 transcation field on Origin tab >Account Assignmnet for investment  - WBS element  , I see the following information.
    WBS element investment project
    Enter the WBS element here, if the system should automatically make statistical postings of the transactions on this asset to this WBS element.
    You can specify in the Customizing definition of the transaction types, whether statistical automatic posting should take place for certain transactions.
    But I am unable to find a setting in the transaction type which allows the statistical postings on the WBS element , when we are posting to the asset.
    We have a requirement to post statistical postings to WBS element when posting to the asset and we thought of using this funtionality but unable to find the setting which allows the statistical postings on the transaction type.
    If anyone knows how to make this setting , could you please share with me.
    Thanks
    Vara Prasad

    Hi Markus,
    Thanks for your response.
    Even with the OSS note I am unable to find how to change the asset accounting transaction types allowed for statistical postings to WBS elements.
    I am aware of other steps in the configuration except this setting, could you please let me know if you have any idea on this setting specifically.
    Regards
    Vara Prasad

  • Statistical posting to Cost center in a CCA report.

    Dear,
    I am posting AP vendor invoice with one cost element which categorized as a primary cost with cost center.
    However CCA report S_ALR_87013611 shows figures 'sometimes' under statistical acct. 
    Can you tell me where i should go through?
    Regards,
    Bluesky.

    HI,
    thats what i try to explain to you there must be another real account assignment object (in your case its profitability segment) together with the cost center that is posted statistically. This is described in SAPNET note 41103 point 4:
    "4. More than one actual account assignment object in a document line item is not allowed. The sole exception is the cost center entered together with another actual CO account assignment object. In this case, the additional object is posted as actual and the cost center is updated statistically."
    Best regards, Christian

  • Statistical posting to Internal order and Cost center while real to PSG

    Dear SAP Gurus,
    There is a requirement is to post statistical posting to Cost center and IO while real posting to PA. I tested and found that I can have only either of Cost center or IO as statistical receiver. Is this standard behaviour or some error in set up.
    Thanks,

    Hi
    I am not sure how IS-H works.. But for sure, it should allow you to enter 3 stat objects...
    There would be some ABAP trick pertaining to IS-H which I am not aware of...
    I can guide you a bit...  During SD billing, ask abaper to put a break point and manually enter the values for cost center and IO and then post the doc.... One of these 2 will be the outcomes
    a. Either it will get posted or
    b. It will get over written before posting....
    based on the outcome, you will have to decide your next course of action
    Also, if your cost center to IO is one to one mapping (Chances would be rare), you can simply write a substitution which would always prevail
    I am sorry I could not offer you a complete solution.. But, this is what comes to my mind...
    Regards
    Ajay M

  • Funds Management - Statistical Posting

    Hello,
    I have implemented FM and I realize that some of the payment updated in FM are statistical posting`s incorrectly. Can I reverse the statistical postings?
    Thank you,
    Angela Costa

    Hi,
    This is not possible in standard procedure. You have to delete transactional data, change the master data of the commitment (or other parameter which made the posting statistical, i.e. special definition of update profile for value type) and then reconstruct the FM data.
    Regards,
    Eli

  • Aggreated Invoice Statistical posting

    Hi Experts,
    This question is related to Aggregated invoice posting in a deregulated scenario.
    People familiar with this scenario will know that, Individual invoices are first posted to end customer contract account and then aggregated posting is made to the supplier accont based on aggregation condition.
    I have restriction in my project that there is exactly 1 customer receivable GL, so for both individual & aggreated invoice I end up posting the same GL.
    Can any one please suggest if the aggregated invoice can be posted statistically as the aggregated invoice is just for information purpose in our case. Also let me know the impact , if any, when we post aggregated invoice statistically.
    Thanks & Regards
    Satyajeet

    Hi Yuvi,
    Could you please elaborate your answer cause what I read in the link given below is about the GLs posted by various transactions. The link gives details of GLs posted before and after aggregated invoice posting is done. Let me know how can I post an aggregate invoice statistically in this scenario.
    http://help.sap.com/saphelp_utilities472/helpdata/EN/15/11de7ce13644d7941e99362a8c74d4/frameset.htm
    I tried assigning a statistical key S to main & sub of aggregate invoice but its giving an error.
    Thanks
    Satyajeet

  • Statistical Posting for CE Categories # 11 & 12

    Hi,
    Just need one clarification. For CE Categories # 11 & 12 if I have assigned Cost Centers to it then postings will be statistical i.e. it will not be appearing in CO_PA value fields, however if i need to repost it I will have to use KE26 or KB61 to post it to PSG so that it will appear in CO-PA value fields ?? Please correct me if I am wrong.
    Even if Actual Revenue is ticked in Cost center will posting happen to CO-PA ??
    Regards,
    Varsha

    Hi,
       Revenues are always posted statistically to cost centers. Cost elements 11 and 12 are revenue elements and hence cost center assignment to these cost elements will be statistical. If COPA is active then the PA segment will be the real account assignment and will carry the revenues. Else you need another real account assignment like IO, WBS etc.
      From your question it appears that COPA is active. In that case the revenues will be passed to the value fields in COPA which are mapped to the SD conditions in tcode KE4I. Read note 20254. Also read note 41103, especially point 6.
    regards
    Waman

  • Statistical WBS and Network

    Dear All,
    We have budget control activated on cost centers via the use of PSM. We now want to use Project System module to execute a project for which cost will be charged onto a cost center. An option already investigated is that of using statistical WBS, which provides two advantages:
    1) No hassle of periodic settlement to cost center as cost is updated simultaneously.
    2) Budget control remains in-tact because any cost posted (statistically, i.e. type '11') on a wbs will be posted (actually, i.e. type '4') on the cost center for which budget would be checked.
    My problem arises when we try to use networks. It is my understanding that network orders cannot be made statistical and therefore any cost posted to them (either direct journal entry or via PO, GR/IR) is done actually (i.e. type '4') and not statistically. No actual entry is posted on the cost center, and I have to manually run the settlement on the network. This settlement process than automatically posts the cost to wbs which eventually goes as actual cost to the cost center. However this case has two major problems:
    1) Increased overhead of periodic settlement for the network
    2) No budget control as cost posted on the network can exceed budget available on the cost center (the budget error would only arise when settling the network).
    My prime objective is for the budget control to remain in-tact for which i need an option of automatic cost posting from the network to the cost center as soon as it is posted (something possible for statistical wbs).
    Any help in this regards would be highly appreciated.
    Regards,
    Ammar Zaheer

    Is there any work around? I heard about periodic reposting, has anyone tried it before? What if I create my PR or PO on the statistical WBS?
    Regards.
    Ammar Zaheer

  • Statistical and value field

    hi,
    i would like to seek advice on below.
    1) when say post statistically, like "A profit center is always posted to statistically", it means no FI accounting document generated?
    so statistical means no fi accounting document generated?
    2) profit segment is value field or combination of characteristic value?
        combinations of characteristic values example: product X sales to customer A in the eastern region
        value field like revenues, costs.
    3) what is the difference for characteristic and characteristic value?
    thanks

    1) For postings in external accounting that use a cost element as the account you need to use a special account assignment logic. This enables the SAP system to ensure that data is reconcilable with all the relevant application components. so if there is no posting in fi how do you reconcile the external posting to fi.
    2) Profit segment is a combination of characteristic
         Eg: Characteristics : Sales organization, region, product, customer group
         Value fields: Revenue, sales deductions, costs and quantities
    3) Segments of your organization for which you want to analyze your data in CO-PA. Eg: Plant/Division/Material/Customer/Product.
    In the above example as mentioned by you product, customer, region would become characteristics. In other words  you are analyzing data on this segments so they become characteristics.
    Value fields: what things you would take in consideration to get the data for the characteristics would become value fields.
    Eg: In the above example you are trying to find how the product x sales is to a particular customer A . So in other to find values you would take what are actual sales for that product , any deductions etc so these would become value fields.

Maybe you are looking for