Skin Buttons Too Large

In the Skin, I have the buttons Contents, Index, and Search.
I created another one called Checklists. The graphic is the perfect
size for both this and the mouse over. However, the area around the
button is too big (I have a screen shot). Any idea how I can fix
this? Right now, all my buttons aren't lining up and I am loosing
space.
Thanks,
Stacie

Hi Stacie
Is your button also using text? What I mean by this is to ask
if when you are in the Skins Editor and you edit the button, is
there text in the field labeled "Text"? If so, the behavior is to
surround the button image as well as the text with what looks like
a "Pressed In" area. If you remove the text, this should go away.
Give that a go and see how it goes.
Cheers... Rick

Similar Messages

My iPhone 5c is stuck onto zoom I cannot get into phone as buttons too large for pass code to press and hence lockdown after several attempts can't get access to settings tried turning off and on and also took sim out and back any help appreciated

mmy I phone 5 c is stuck on large close up (zoom)
i therefore can't get into the phone as the pass code to get in is difficult to get everytime you get two numbers I you can't get the other two
so this has caused the lockdowns ..many times... I am now waiting to try again in 23 minutes but same thing will happen again as all the numbers are not displayed on the screen
i I don't know if I have done anything as it was all working fine up to last night and been like this ever since
i I have taken out the sim and put back
aany help appreciated thanks

There are two ways to turn off Zoom:
1. Connect to iTunes. Go to the iPhone summary pane and click the "Configure Universal Access" button. Then turn Zoom off.
2. Double-tap the phone's screen with three fingers. Then go to Settings -> General -> Accessibility -> Zoom and tap the Zoom On/Off switch.

I am trying to download my paid for Elements 13 upgrade. When I click on the "download" button, I recieve this message: 413 Header Length too Large

I am trying to download my paid for Elements 13 upgrade. When I click on the "download" button, I receive this message: 413 Header Length too Large. Help?

You can download using direct download link , which I had provided.
Download Photoshop Elements products | 13, 12, 11, 10
During installation , when prompted enter serial number and proceed with the installation .
If you had purchased upgrade serial number.
First enter Photoshop Elements 13 serial number .
Then it will ask for previous qualifying version serial number.
From the drop down list , select Photoshop Elements 12 and then enter Photoshop Elements 12 serial number

TS1717 Everytime i open Itunes in windows 7 despite me specifying maximised it opens in window that is always too large for the screen. EVen windowing the frame and then remaximiseing puts the buttons outside the edge of the screen

Every time i open Itunes it starts in a window that is too large for the screen (despite me setting "start maximised" in the launch options). Then hitting the "maximise" button expands the window slightly pushing all the buttons and edge of the frame out of the screen and behind the taskbar at the bottom. I have to move the window to a place where i can resize it smaller than the screen then and only then does maximising the window fit it properly to the screen.

Okay, I just opened up Itunes this evening and it's not working again! Sheeshy Peetz!
HOWEVER, this time I followed some different steps and got it working.
(1) Uninstall Quicktime
(2) Uninstall Itunes
(3) Re-download Both
(4) Install Quicktime First! (Read #6 below first though)
(5) Install Itunes Next! (Read #6 below first though)
(6) Here is the CAVEAT for me: I have an SSD as my C:\Drive, which is where I originally installed both of them. So this time, I installed both Quicktime and Itunes to a Non-SSD drive, which was one of my SATA Drives.
(7) Start Itunes and Test your Movies now. For me I was able to play them finally. Who knows how long this will last lol.
Maybe this work for someone.

Click download button and get "413 Header Length too Large"

I'm trying to download photoshop elements. After I click on the 'download' text I am redirected to a page that says
413
Header Length too Large
Any idea how I can get around this???

Try downloading from http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
or http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html (note the Very Important Instructions on that page)
If you still get problems, try a different browser.

Mac Mini display is too large for screen on only one user account

Okay, so I left my two year olds alone for a minute playing the "alphabet game" on my Mac Mini. They only had the keyboard, no mouse but managed to muck up my display leaving me a bit frustrated. The screen is now too large for my Samsung display. The only way to see everything (dock, top bar, etc) is to move my mouse arrow to the end of my display and see it roll back onto the page. I've checked the settings there and they are fine. The MacBook Pro plugs right in and is proper resolution. So I then wondered if another account on the Mac Mini would do the same thing. I logged out of my Admin account and into another and everything looks just dandy. I log back into my Admin account and it's too large and blurry again. The resolution is set correct at 1920x1080 at 60 Hz.
What button did they push on my keyboard that would do this and how do I get it back?? Aargh! Thanks all!

Ha, figured it out myself from another discussion forum finally. Thoght I'd share in case anyone else runs into this. They must have hit "Zoom" by htting the "Control" and scroll buttons at the same time..
Resolution:
You can zoom out by holding down the Option and Command buttons on the keyboard and, while you hold them down, pressing the - key.

OS10.3.1 a disaster! Among other things, the dsplay is too large for screen

I do not like OS 10.3 ! After my Z10 was updated to 10.3.1.1779 about a month ago, I access it because the password entry keyboard displayed for about 1/10 sec leaving a black screen.
After a device reset the device the keyboard remained visible but did not respond to touches (actually it did respond randomly to some). Finally another reset gave me a usable keyboard.
But the device always opens with an icon display about 20% too large for my screen and requires several shrink attempts before the proper size displays. Each attempt simply bounces back to the oversize state.
Unfortunately, this also happens with every app (including "Settings") opened. Yesterday, I couldn't return to the main of Settings because the sub-page wouldn't shrink to expose the "<' button - a close and re-open was the only way to get back to the main page.
Other points I hate about the OS: I've noticed my active wallpaper (not custom but from 10.2) is not listed in the the new 10.3 wallpaper list and since I don't know where its stored I can't try one of the newer ones without giving up on the present wallpaper.
The date displayed on the home screen is too faint to be read with my wallpaper. I know there are some people who think black on black is cool; they obviously have great eyesight. The new 10.3 compass is now totally useless and the new clock is not much better but is at least still usable by a change to a digital display.
I recently tried to check the time on a sunny afternoon and gave up because I couldn't make out the white lines on the black background. I find the stupidity of black on black unfathomable and in over 40 years of software development I have never seen something as wasteful of engineering time as products with poor user interfaces (i.e. black on black). Why can't these apps offer the user the ability to change the colour?
The calculator has also regressed. Again all black (cool!), though that's not the issue here. For the longest time I thought it no longer supported scientific operations until I accidentally got a lucky swipe to bring it into view.
However, the requirement of a half-dozen swipe attempts for each display change reduces this app to a space waster or only to be only useful for simple operations and units conversion. I'm going to try a reload of the OS but unfortunately that won't improve the apps.
Is this standard procedure that Blackberry destroys all (blackberry) apps of the previous version with new ones at each update and offers no way to get back or protect against such changes?

Hi All,
I have already checked below configuration T-Code Value :
T-Code : OBA0 :
Tolerance for Groups of G/L Accounts in Local Curre :
Debit posting : 0 TWD, Percentage 0 %
Credit posting : 0 TWD, Percentage 0 %
T-Code : OBA4 :
Upper limits for posting procedures :
Amount per document : 9,999,999,999,999
Amount per open item account item : 999,999,999,999
cash discount per line item : 1%
Permitted payment differences :
Revenue : Amount 100, Percent 1%, Cash discnt adj. to : 100
Expense : Amount 100, Percent 1%, Cash discnt adj. to : 100
I don't understand when AR open item amount is USD 100.3, and incoming payment 101.12, The system can auto clearing by current configuration, but change the AR open item amount to USD 0.3 and change incoming payment amount to 1.12, The system alert error message "The difference is too large for clearing". The same system configuration and the same "Not assigned" value in choosing open item screen, but produce different results!
How should i change the configuration?
Best regards,
Eric
Edited by: Eric Yang on Sep 12, 2008 2:12 AM

HT1338 Since having my Macbook Pro attached to a large display screen, everything is too large for the screen. Is there a cure please?

Today I had my Mac linked to a projector screen, and since disconnection evrything from the desk top onwards has been too large for the screen. Before that evrything was perfect. I have tried zoom buttons etc, but nothing seems to work. Any help gratefully rceived.

So it's not the Zoom feature? Open System Preferences Universal Access pane Seeing tab. Make sure Zoom is turned OFF.
If it's not that, then you may have the resolution set so that it is not optimal for the built-in display. Open System Preferences Displays pane Display tab. The optimal resolution is usually the one at the top of the list of choices.

Whats going on when after i have put my new project it tells me that cannot burn because my encode it too large for DVD

I am trying to convert a video into a dVd i did one and it will not play on my blueray, but, at least it will do on my computer. Now i am trying to do a different dvd and it tells me after i have downlowed my new project, that i cannot burn the idvd because it is too large check my encoded?

The reason why your DVD will not play maybe your choice of disk.
Was it a DVD + or DVD - ?
Always use a good quality DVD blank disk, at least Verbatim and check what format your player will play.
Next, to achieve the best quality export from iMovie, Share your Project to Media Browser.
Then open iDVD and use the media button (bottom right) to import your movie.
A possible reason that you are getting a too large error message is the time length of your DVD.
The default setting in iDVD for Encoding is Best Performance (60mins) and you need to change this to either High Qualirty or Professional Quality which will allow more to be encoded on the disc (120 mins).
iDVD > Project > Project Info > Encoding to change this setting and see on the Capacity slider if your project will fit.
Otherwise check how much free space you have on your HD.
Z.
PS Slow your burn speed down to x4 for error free results.

File too large for volume format?

I'm trying to copy a 4.6GB .m4v file from my hard disk to an 8GB USB flash drive.
When I drag the movie in the finder, I get a dialogue telling me the file "is too large for the volume's format". That's a new one for me. If the flash drive has 8GB available, and the file is only 4.6GB in size, how is that too large? Does it have to do with the way the flash drive is formatted? It's presently formatted as MS DOS FAT 32. Is that the problem? Do I need to reformat as HFS+? Or is it some other problem?

The flash drive is pre-formatted FAT32 which has a maximum allowable file size of 2 GBs. Change the flash drive format for OS X:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.

HT201077 The photos I have transferred to my PC via Photo Stream are too large for me to share with friends. How do I reduce the size and how do I share them with friends and family only?

I have the latest iPad update on my Ipad 3 as of September 23, 2012.
I havejust taken a series of photographs with my iPad that I would like to share with family and specific friends ONLY. I have set up the photos I want to share in Photo Stream. I have synced them to my PC via iCloud. Everything is fine except, the pictures are far too large to share ... and I don't know what exactly I am supposed to do in order to give my family access to these Photo Stream pictures.
How do I reduce the size of photo stream pictures once they are on my PC via iCloud?
What exactly do I do to give access to the photos on Photo Stream to specific people?
How can I share the videos I have taken with my iPad?
Many thanks for your attention. I look forward to your reply.

Select your photo/s.
File menu > Export..
Kind: JPEG
JPEG Quality: Maximum
Include: [√] Title and keywords
[√] Location information
Size: Full Size
File Name: Use filename
Select one of the photos and open in with Preview.
Tools menu > Show Inspector
Under the second button choose IPTC and it is all there.
Sorry for all the confusion.
:^P

PSE Workspace too large for screen

I'm using PSE v.11 with OSX on an iMac.
The PSE workspace is too large for the screen e.g. the five icons to the left of "Add Event" on the lower control bar are not visible.
Have noted previous discussions have mentioned a "green button" - what's that ?
Help appreciated.

But I'd try going to system prefs>displays and changing your resolution a few times till it snaps into place. You aren't running this on a first generation macbook air, are you?

It says video is too large on iPhone to be send to iCloud

When I tried to send a video clip taken on iPhone (duration - 13 min) to iCloud a notification appeared that the video was too large and I need to crop it. I clicked OK and then an upper line got out showing all the length frame by frame with a yellow marker supposed to be used as a cropping tool. When I started manipulating the tool all things got freezed and I had no chose but to press Main Menu button to recover it. Checking it concerning whether the video was too large I then got to Storage Manager and it estimated at 4.1 GB of unused space of 5 GB allowed free iCloud storage. So what's the trouble, why it all freezed and why it said "too large" for video?

Shared streams don't use your iCloud storage so it doesn't matter how much space you have. Because the storage for shared streams is free, there are limits on what can be included (see http://support.apple.com/kb/HT4858). For videos, the maximum length is 5 min.

Printing from ipad too large on p1102w

All my printing from the IPad print out too large compared to the print from my Win7 PC.
E.g. If I print an email from my WIn 7 PC to the HP P1102w result normal - 1 page.
The same email printed from my Ipad to the P1102w prints a much larger font and runs to two pages.
Any ideas how to rectify this?
Thanks
James

Hello jamespbland,
Welcome to the HP Support Forums!
I see you are having to different out comes of print when using the P1102w, the Windows computer and iPad will print out the same email very differently.
What method are you printing to the P1102w with, ePrint (forwarding the email to the printers email), AirPrint (iPad's printing method) or the ePrint Mobile App?
When printing from Apps or Mobile devices, the printer is not in control of the print outs, the App controls that. With AirPrint and ePrint, I do not believe this is an option that can be adjusted. From the ePrint Mobile App there are more options to set, a re-size option I am not sure however.
Printing from an Apple Mobile Device<---
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

IOS 4.2 issue, or App issue? Photos too large.

I spent two weeks in Japan, taking photos on my DSLR, and uploading them via SD card into the camera connector to the iPad. All worked fine.
I ran Photoshop Express and iOS3.2 (can't remember if it was 3.2.1 or 3.2.2), and was able to edit all the photos, and upload them to FaceBook, and all was well.
Since I've been back, I installed the iOS4.2 update, and an update to PS Express.
Now, all of the photos (including ones I had previously edited) cannot be edited in PS Express, it gives me a message "This photo is too large to be viewed".
Similarly, I've tried another program called Fluid FX, which either gives a similar message, or just crashes.
I've made sure there are no other apps running, have tried a hard reset, and nothing has helped.
I'm wondering if anyone might have any insights before I try downgrading back to iOS3 (and get back my orientation lock button, yay!).
(and yes, it seems another solution is just to take lower resolution images on my camera, but who wants to do that?)

I thought I had updated PS Express for iOS4, but checking the app in iTunes says:
# Updated: 29 September 2010
# Current Version: 1.3.2
# 1.3.2 (iOS 4.0 Tested)
which is before the iOS4.2 release.
Fluid FX has been updated for iOS4.2

Skin Buttons Too Large

Similar Messages

Maybe you are looking for