Skin Control not showing

Hi, I'm using Flash 8, producing and swf file and inserting
on the website. Seems to play just fine but I can't see the
transparent control over the movie. Tried right clicking and it
does not appear. Is is just not finding the skin. I am rendering it
with the skin from an avi file. It shows up in Flash just perfectly
but does not show on the website. The skin and swf file are located
in the same sub. The file is on the index page. I'm using front
page to insert the movie

Hi Gurus,
I tryied manually and i found that
1) in table control when i edit,delete or modify value  then impact on ztable is Below table.
                 Budget No    Sales dist       Material           Budgeted Units
   A :-   01    001747       430203           S0116649                    1,382
   B :-   01    004267       430203           S0116649                    1,050
   C :-   01    004280       430203           S0116649                        0 
Line A is my first record
Line B when i modify again new entry is going to create with New budget No
Line C when i delete data from table control  again it create new entry with diff budget No and  Budetget Units set to zero.
why each time new entry going to create ?

Similar Messages

  • Flash control skin does not show in Golive

    Mac OS 10.4.11 GoLive CS (1)  - I have a flash file (.flv) that works well - see initial test without an applied skin - http://www.artdesign.org.uk/test - but with a couple of problems for the actual replacement intended for the correct site.
    Problem 1. The controls skin I attached to the yell_video.flv when converting to a yell_video.swf in Adobe Flash program does not show in Golive, as the actual video does not show either I assume this is normal. I have the 3 files sitting in the 'web content/graphics' folder on the site - yell_video.flv - yell_video.swf - SkinUnderAll.swf - but can not see a means of 'attaching' the skin file to any field in the Inspector Palette. When I run it in a browser the error message comes up, with a dismiss or continue option, click either and the video plays fine but without the skin.
    Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2035: URL Not Found. URL: SkinUnderAll.swf"]
    Problem 2. When the site is first encountered as a user there is a momentary white box where the flash yell_video.swf sits. I have made sure that when converting the .flv file in the Flash program I made the background the exactly same colour as the web page it sits on. The white is then momentarily followed by the blue colour that is not quite the same as the page background I stipulated.

    After much messing around I have found a solution to one of my own problems.
    The SkinUnderPlayStopSeekMuteVol.swf file generated from the exporting of the Flash yell_video.swf from the yell_video.flv file should sit in the same folder as the html page the video has been inserted in. In my case I had all 3 files in a folder entitled 'graphics' which is what caused the problem.
    I still have a problem with the momentary white box where the flash yell_video.swf sits when first opening the site.

  • Flash Controls Not Showing On Web Page

    Hi-
    Been beating my head lately using Flash Pro 8 and DW 8.02.
    Here is the latest difficulty:
    Created a Flash video file in Premiere Elements 4
    Imported the .flv Flash video file into Flash 8 using import
    video
    Added an external skin to the video
    Saved Flash .fla file
    Exported movie in .swf format
    I can open the .swf file in Flash Player 8 and it works fine.
    I can also use the Publish setting in Flash to export the necessary
    files as well as the HTML file. When viewed in either Firefox or IE
    it plays correctly and the player controls are present. However, if
    I create a new page in DW8 and then Insert > Media > Flash,
    point it to the .swf file and then view it in Firefox or IE I can
    only see the .flv Flash video file and none of the controls/skin
    that should be there. I know the controls/skin are actually present
    because I can browse directly to the .swf file and it displays
    works properly. I can also use the publish settings from Flash to
    create the HTML page and it works correctly as well. It is only
    when the page is generated by DW8 that I get this problem. I have
    looked at the code created by DW8 and cannot find any reference to
    the .swf file for the movie controls/skin. Any idea why DW8 would
    only be placing the Flash video .flv file on the page and not
    writing the code to place the entire Flash movie .swf on the page?
    I have tried restarting/rebooting, created a new "clean" test page
    with only the Flash movie on it and it is always the same. The
    other thing that is weird is I did not select Autoplay or Loop in
    the DW8 settings nor in Flash 8, yet when I preview the page
    created by DW8 in a browser, piece of the Flash movie I can see
    (the Flash video part) autoplays and loops!
    Again, any help is appreciated.
    -=SB

    Update- This is what I have discovered while playing around
    with the page and Flash file:
    If I create the .swf files for the movie and skin and then
    save them to the same directory as the .Flash video file and then
    view the .swf file everything works fine.
    If I then create a web page using DW8 and insert the Flash
    into the page and save the web page to the exact same directory as
    all the other files and then view the web page in a browser, it
    works fine. However, if I create a new web page in DW8, save it to
    any other directory other than the one where the .swf and .flv
    files are located and then view the page in a browser only the .flv
    Flash video portion of the movie will display in the browser--the
    controls are missing. However, if I browse directly to the .swf
    file and avoid going through the DW8 generated web page the Flash
    movie displays properly with the controls in the correct location.
    My question then is why will DW8 not show the Flash movie with
    controls if the page is located in higher level directory than the
    .swf and .flv files and yet browsing directly to the .swf file with
    my browser works just fine? I have checked the path to the .swf
    file in the DW8 source code and it is pointing to the correct
    directory location. This is so strange--why will it display one way
    and not the other? Any ideas?

  • Flv skin does not show

    I can not get my the skin to display on my streaming .flv
    view it at
    streaming
    .flv
    Any help is very much appreciated!
    I have applied the skin in the fla and it shows up fine when
    I preview it but does not show when it is on the net.
    Thanks guy, this is a great forum!

    Hi there
    Are you referring to the "Skin" as in the playback controls for the FLV itself? Or the overall playback controls for Captivate?
    I suppose the logical step to take is to determine if your issue lies with Captivate generically or only this project. My guess is that it's only this project.
    To easily confirm things, create a new blank project and publish that. See if it behaves as one might expect. If so, your Captivate project has an issue that you need to address. If not, you may need to reinstall Captivate.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Volume control not showing

    In Flash CS3 I am creating an SWF for a live stream. I have
    added a player control bar ( Play, pause, volume control etc) but
    when I publish the SWF it does not show up. I want to be able to
    mute my Flash player.
    Thanks for any help.

    I assume the switch on the side of the phone is in the proper position.  In settings/sound make sure the slider is at max.  Turn on Change with buttons in settings/sound.  In settings/music make sure you have volume limit turned off or if it is on check to see hwat limit you have set so it is not too low

  • Adobe Reader Control not showing in COM tab of Toolbox Items in Visual Studio

    This is my first experience to work on C# and Visual Studio. I have a task to show PDF document on a window form. After reading tutorials and following some examples I have decided to add the 'Adobe Reader Control' in my toolbox and use that control on my form. The problem is that I cannot able to add that control on my toolbox because "it is not showing in COM tab of toolbox items. To clarify just see the red lined component in image that is NOT showing on my component list".
    I have Adobe Reader 11 installed on my machine.
    I am using Visual Studio 2005.
    I am using Windows 7 64-bit OS.
    In my project I have changed the architecture from 'Any CPU' to 'x86'
    Any ideas what can be the issue, why it is not coming on the list?
    This is my first post on this forum. Do point me out if i miss any forum guidelines.

    I have the same problem!  I have photoshop cc2014 (which we own) and the object library shows, but not for cs 5.1 (30 day trial).
    Does registering unlock something?
    Help please!!

  • Movie Controls Not Showing

    Hello Everyone,
    Here is the problem: I have posted movies to my web page, but the fast forward & reverse buttons at the bottom right of the movie are not showing up. I originally had kioskmode set to on, but have removed it since. I also tried exporting the movie with internet streaming-fast start enabled.
    Any suggestions?
    Here is an example - click "Placeholder" http://homepage.mac.com/badelstein/parti/port/splshscr/splshscr.html
    Thanks for the help. Bill

    Found out that CSS was calling out a div width smaller than the movie width - reset to movie width fixed problem.

  • MSI Z68A-GD80-G3 sata port 7 marvell controlled not showing in BIOS

    My spec is..Antec 1200 case.  MSI Z68A-GD80-G3 board .  i7 -2700K @4.1 GHZ.  GTX 580 OC twin FrozR II 1536 Mb Graphics.Corsair Vengeance 16 GB PC3-12800C9 1600MHz RAM.  Cooler Master Hyper 212+ CPU  cooler.  Crucial  SSD M4 128 GB SATA 6Gb/s main Hard drive.Crucial  SSD M4  128GB hard drive. 500 GB HDD. Crucial SSD M4 60GB.1200W PSU.
    My 3rd  60 GB SSD drive had to be plugged in sata 7..I reformatted It in windows and it is working. It does still not show up on BIOS.
    I could not find my install disc. I couldnt find any marvell drivers in the download section for my board?
    Has windows found them? why no show in BIOS?

    I may have found correct drivers now SATA 7 drive is showing up. seems to be running . my ssds running off SATA 1 and 2 are getting a AS SSD bench mark score of 710 and 780. The SATA 7 one is  scoring at 340 so it  is not working like the first x2 SDD's.

  • Skin does not show up when incorporating .flv file (Captivate 4)

    Hey folks, I am tired of beating my head on the wall, so here is my situation:
    I am attempting to have Captivate 4 call up a .flv file.  I am using Captivate's built-in feature to associate this file to the Captivate project.  Everything seems to go fine, but when I publish - no dice.  A skin .swf is created, but does not appear in the published project.  Blank space where the skin shows up in the raw project and the preview of the project.
    I have checked addresses.  I have tried relative and absolute paths. I have re-done everything. I cannot make this work. It may well be something simple and foolish, but I am getting rather frustrated.  I have searched the forums for this type of issue.  I did see some conversation about a skin with underscores ("_") having difficulty, or missing "metadata".  I am using the skin Captivate is choosing (which has an underscore in it) so am curious why this is an issue, and my brain explodes when I try to understand metadata...
    My primary goal is to simply get the flv to play in a published Captivate 4 project.
    Please help!
    Thanks!
       - nuguy

    Hi there
    Are you referring to the "Skin" as in the playback controls for the FLV itself? Or the overall playback controls for Captivate?
    I suppose the logical step to take is to determine if your issue lies with Captivate generically or only this project. My guess is that it's only this project.
    To easily confirm things, create a new blank project and publish that. See if it behaves as one might expect. If so, your Captivate project has an issue that you need to address. If not, you may need to reinstall Captivate.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Flash video skin controls not appearing on web page

    Hi
    I have a puzzle. I have some test movie clips that are
    operated (played) by pressing a thumbnail. All works ok in the
    resultinmg html and flash file that is produced, but when I import
    the flash movi into DW, the controls disappear, but the movie
    plays...
    if you look at the link below you can see the flash movie
    controls in operation OK
    http://www.chrisleslie.co.uk/new/flash/8movietest.html
    but when the flash doc is inserted into the actual page the
    controls disappear......
    http://www.chrisleslie.co.uk/new/Film.htm
    (press thumbnail 2 to play the test movie)
    any ideas would be greatly received...im at a loss here and
    heading for the vodka.......

    hi,
    I have a similar problem. I have an FLV which sits inside my flash movie. It works fine when previewing it within the flash viewer.
    But when embedding the flash movie into a html page - the controls magically disappear!
    Now i have tried copying the skin to EVERY SINGLE LOCATION WITHIN MY FOLDER STRUCTURE...but it still does not display.
    Any more suggestions??

  • VS2008 CR10 or CR11 control not showing in toolbox

    Hi all,
    I'm very urgently writing an invoice program for one of our exernal sites, however, I have an invoice report already made in CR that I'd like to be able to use from VS2008 C#.
    For some reason the Repoert Viewer control is not in the toolbox. I have tried to add it, but in the list only the CR ActiveX object shows up - if I use that, then it has a width and height of 0 and is unusable. I assume this is the wrong control.
    I have reinstalled CR11, and CR10 twice and VS 2008 twice - it still refuses to show.
    How can I use the product that we have shelled out money for?
    I tried to phone BO support but was told it was going to cost me 130 quid.
    Edited by: dchurch on May 21, 2010 3:44 PM

    My colleague is also using this version on VS2008 and the control is on his toolbox and works fine, just not on mine for some reason.
    Not supported. Do not do this. Do not use it. You will run into issues sooner or later. Nothing I can do for you until you are on a supported version of CR for .NET 2008.
    See [this|https://wiki.sdn.sap.com/wiki/display/BOBJ/WhichCrystalReportsassemblyversionsaresupportedinwhichversionsofVisualStudio+.NET] wiki for more details.
    Ludek

  • Export button for crystalreportviewer control not showing ddl entries for..

    we have a .net web application that was created using asp.net 1.1. 
    It displays crystal reports using the crystalreportviewer control.
    Once the report is displayed, the user clicks on the export button and it looks just fine.
    so everything is ok when it is run on the developer machine.
    We start having issues when the application is deployed to a test server.
    Here is the weird part:  the site is running using asp.net 2.0 instead of 1.1. (not sure why, but they have their reasons)
    First off, we tried creating the report and got the good ole "bobj is undefined".  So I copied the crystalreportviewers folder into the site itself.  I then updated the web.config the way it is described here (bottom):
    http://blog.dragonsoft.us/2008/10/29/how-to-deploy-crystal-reports-2008-project-part-2/
    That fixed the bobj, but now we have an issue with the export button.
    when we click on the File Format drop down, the choices display at the bottom of the screen.  So the user is unable to select a format.  They are stuck using the preselcted "Crystal Reports (RPT)" entry.
    A few other things visually...
    -the main tool bar is white instead of being shaded grey
    -the export dialog is white instead of being shaded grey
    I'm wondering if we using the right version of the crystaldecisions dlls?  We are using version 12.0.1100.0 of those dlls for this problem site.  is it ok that the site is using asp.net 2.0?  or does it HAVE to use 1.1?
    bobj keeps haunting me in one way or the other.
    Edited by: brownie04 on Jul 20, 2010 10:41 PM

    The CR assemblies of version 12.0.1100.0 were specifically compiled to use framework 1.1. That is why you will also find those same assemblies of version 12.0.2000.0 - yup, you guessed it - compiled to use framework 2.x. Unfortunately, without an application configuration file, the latest compatible runtime version installed on the computer is loaded by default. So the app loads framework 2.0, but the CR assemblies are configured for framework 1.1
    The way I see it, you have two options option;
    1) install framework 1.1 on that computer. You will then have to create a configuration file that will direct your ap to load framework 1.1. For details on how to do this see the MS KBase [Configuring a COM Application for Side-By-Side Execution|http://msdn.microsoft.com/en-us/library/65y5x3xf(vs.71).aspx].
    2) Compile your app to use framework 2.0 (e.g.; .NET 2005 or .NET 2008), thus loading CR assemblies of version 12.0.2000.0
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • Color Correction Effect Controls Not Showing Controls

    The recent upgrade seemed to work flawlessly until I tried to go back to some color correction I had started earlier.  In some cases, when I click on the Video Effects tab in the Color Correction workspace, my controls are there and working.  For others, when I click on the Video Effects tab, there's simply nothing there.  I have dragged effects back onto the clip and then gone back to the Effects tab, and still see nothing.  Has anyone else had this problem?  Any thoughts?

    I have the same problem. I've tried removing all effects, adding more effects etc, but in the Effect Controls window all I get is the name of the clip highlighted in blue. I've also gone to Window and selected Effect Controls, but all this does is reveal or hide the Effect Controls tab.  The Motion, Opacity etc controls are not there when I click on the tab. Anyone have any ideas how to get the Effect Controls back?

  • Ad Control not showing above Unity3d window even if draw order is adjusted

    I am using Unity3d and Visual Studio to release a simple game. I already have a paid version released and working great. I am trying to make an ad supported version with little luck.
    I added in the Ad Control item into design view and attempted to adjust the Unity window so that it sits below where the ad banner will sit.  I have even tried to adjust the Ad Control draw order to various numbers higher than 0 (not sure if that should
    help or not).
    When the game starts, there is a "flash" of a red outline where the ad should be, but then it disappears, presumably behind the Unity window.  This area is also not pressable, it blocks the presses on my game where the ad should be.
    Is this something to do with the Unity object window parameters, or is there something else I may have to do to get my ads to work?
    Thanks!
    Nick

    Hello,
    Welcome to MSDN forum.
    I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
    the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    Because your issue is related to Unity3d which is third-party, I suggest consulting your issue on Unity3d community:
    https://unity3d.com/community for better response in order to resolve your issue as soon as possible.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Enterprise Manager Database Control not showing all rows

    Hello,
    I populated a DB through SQL Developer but when I access the DB control of EM and hit "view data" for the correspondant table, only few of the rows are shown.
    Any idea why and HOW I can get it to show all the data I inserted?
    Many thanks!

    There could be few reasons as follows.
    1. You could have filter set in Sql Developer - Try the same from a sqlplus.
    2. you can have a VPD policy on the table - Check for policies on that table using dba_policies.
    3. Also try to analyze the table and check for num_rows from dba_tables. That will tell you exactly how many rows you have irrespective of tool, policy, etc etc.
    Thanks,
    Ankit.

Maybe you are looking for