Skip first screen

hi all,
i have a 'ztcode' with obligatory fields. i want to call 'ztcode' from another program using the following:
call transaction 'ztcode' and skip first screen.
is there a way to avoid error since obligatory fields will not be filled up if above code is executed?
thanks,
sid

hi all,
thanks 4 d reply. submit is ok. right now im trying to learn the set parameters statement. can u tell me exactly how it works by example. i can't seem follow the sap help documents. in my report program 'ZTCODE' i put this:
parameters p_maktx like makt-maktx memory id pmakt
                  obligatory.
and then at another program, 'ZCALLER', i called 'ZTCODE' which points to my program, as follows:
set parameter id 'pmaktx' field 'REM'.
      call transaction 'ZTCODE'
        and skip first screen.
i ran the 'ZCALLER' and as soon as it called 'ZTCODE' the program stops with the message 'make an entry in all required fields'. can u tell me what i missed?
thanks,
sid

Similar Messages

Call tranasaction with skip first screen in ecc6

Hi,
We are doing upgrade from 4.7 to ecc 6. We are getting an error while running a report( The addition "AND SKIP FIRST SCREEN" can't be used with "CALL TRANSACTION .. USING". ) in ecc6. This is not showing error in 4.7. Call transaction with skip first screen is fine in 4.7. But it is throwing an error in ecc6.
Could anybody provide me the pointers to rectify this error.
Regards,
Ramesh

Hi
Did you pass all the mandatory field values to the calling transaction , Because when you use this addition you need to pass all the mandatory field values then only it works fine. Check out whether you are passing all the mandatory field values.
Regards
Pavan

Skip first screen of BD87 using call transaction with BDC_DATA option

hello all,
i am using call transaction with BDC_DATA option and i want to skip first screen, so can anyone please tell me how can i skip first screen of BD87 and get second screen that is output screen?
regards.

Hi
Build a BDCDATA with following code..
                                                      T     BD87
RBDMON00     1100     X
BDC_CURSOR     SX_DOCNU-LOW
                                                            BDC_OKCODE     =CRET
                                                            SX_DOCNU-LOW
SX_CRETI-LOW     00:00:00
                                                            SX_CRETI-HIGH     00:00:00
                                                            SX_UPDDA-LOW     05.02.2010
                                                            SX_UPDDA-HIGH     05.02.2010
                                                            SX_UPDTI-LOW     00:00:00
                                                            SX_UPDTI-HIGH     00:00:00
RBDMON00     0100     X
BDC_OKCODE     =BACK
RBDMON00     1100     X
BDC_OKCODE     /ECBAC
                                                            BDC_CURSOR     SX_DOCNU-LOW

While Pressing the button i want to skip first screen in standard screen.

Hello All,
I need to create a z Program and call a screen variant of a standard transaction in it.
I am calling a screen variant of transaction PA70 to hide some of the fields of the screen.
Also the first screen is supressed.
My requirement is while pressing back button it should not come on the first screen.
while if i am doing the same thing with Transaction PA20 it is not coming back to first screen.
How can i supress this first screen while coming back?
Regards.

Hi,
Use:
"set al the field values on the initial screen of the transaction and then use
CALL TRANSACTION '<t-code>' AND SKIP FIRST SCREEN.
Now you will be navigated to second screen of the transaction, when you click, you will be navigated to your program selection screen.
Hope this helps you.
Regards,
Tarun

Is possible to skip first screen in BDC Session

Hi all,
Is it possible like in call transaction method to skip first screen in Batch input session?
Syntax----
call transaction MM01 and skip first screen.
I want same result By using Batch input session.
Suggess..........
Thanks
Sanket sethi

Actually i am open transaction SE38 and execute an Standard Report.In the selectiion screen I am changing something in layout.
I recorded it by BDC.
And use batch input session.
Now i want to skip the se38 window i want to drop user on the execution of the report.
I also do it by submit report but i want to know that is there any possibilities to use with BDC session.
Thanks
Sanket

Problems with SKIP FIRST Screen when calling a transaction variant

Hi,
I have a transaction variant of VA02 that suppresses the display of the pricing button on the conditions screen. I have created a variant transaction for called ZA02 which calls this variant of VA02.
In my program I have coded the following :-
      SET PARAMETER ID 'AUN' FIELD VBELN.
      SET PARAMETER ID 'VPO' FIELD POSNR.
      CALL TRANSACTION 'ZA02' AND SKIP FIRST SCREEN.
I would have expected the program to display the second screen of VA02 but it displays the first screen and when I hit return key the second screen is then displayed.
I don't think I need VPO setting but when I code
      SET PARAMETER ID 'AUN' FIELD VBELN.
      SET PARAMETER ID 'VPO' FIELD POSNR.
      CALL TRANSACTION 'VA02' AND SKIP FIRST SCREEN.
VA02's second screen is displayed
Any help as to how to Skip this first screen with ZA02 would be greatly appreciated
Thanks
Rous

Yes you are right Reg thanks for that.
But it appears that VA02 doesn't require it setting anyway. I changed the PID to APO and indeed I've even commented the line out, but my program goes to the second screen when calling VA02 but stays on the first screen when calling ZA02 .

Call transaction and skip first screen

Hi,
I have a little but I think difficult problem
I have a selection screen and after that I call my dnypro. In this dynpro I can open a dynpro which looks like a popup where I have the possibility to call the same transaction with other input paramters.
the problem is when I make call transaction and want to go back I see the pop up dynpro which calls the transaction. so how can I close this popup dynpro by calling again transaction?

I think I can't eyplain it.
Following. I have:
call transaction trans: selection screen calls dynpro 100, in dynpro 100 button with dynpro 200 with starting parameters.
dynpro 200 calls again transaction trans with skip first screen.
now I have displayed again dynpro 100 with new values. When I now want to go back I can see dynpro 200 which called the transaction. So how can I achieve this that dynpro 200 isn't shown when I go back ?

Call tcode and skip first screen

hi all,
before i think of posing a question i have searched SDN for 2days but dint get the desired results.
so i am posting a question.
in my prog am calling a TCODE and in that TCODE i have a mandatory field so when i say skip first screen it does not skip as their is a mandatory field.
so i used my code like this and checked twice and i found i have value in L_PERNO and id is: EHS00PERSONID.
i have a value in L_PERNO.
parameter id of the tcode field is : EHS00PERSONID
set parameter id 'EHS00PERSONID' field L_PERNO.
CALL TRANSACTION 'ZEDIT' AND SKIP FIRST SCREEN .
but it does not set the value... what am i missing still to get it done can i have some input pls.
thanks a lot in advance,
pasala.

Hi Pasala,
You have done everything right and your program will work with simple addition.
Just add the statement below in your transaction 'ZEDIT' in PBO of screen on which mandatory field exist.
get parameter id 'EHS00PERSONID' field 'XXX.'
where XXX is the name of mandatory field on the screen.
Amit Singla

Call Transaction and skip first screen on workflow task

Hello, I'm developing a workflow with a user decison step, where the user should fill some data in transaction FD02.
When the user presses the button in the workitem, the wf goes to a step where i should call transaction FD02.
I'm using SET PARAMETER ID: 'KUN' FIELD customer. to fill the customer field and CALL TRANSACTION 'FD02' AND SKIP FIRST SCREEN.
But when I press the button in the workitem nothing happens. I tested the same in a report and it works. Can anybody help me?
Thanks a lot.

Hi,
try below code
data: fcode type FCODE value 'ANTRAGAEN',
       customer type kunner,
       bukrs type bukrs.
SET PARAMETER ID 'KUN' FIELD customer. " to fill the customer field
SET PARAMETER ID 'BUK' FIELD companycoder. " to fill the company code
SET PARAMETER ID 'TTC' FIELD fcoder.       " to fill Function code for enter " it may be other than TTC please check.
CALL TRANSACTION 'FD02' AND SKIP FIRST SCREEN.

CALL TRANSACTION AND SKIP FIRST SCREEN to specified tab in TCODE 'IW32'

Hi,
I am using CALL TRANSACTION AND SKIP FIRST SCREEN in ALV Grid Report to call IW32 tcode and it goes to tcode skipping the first screen. But it goes to the default header tab in the tab control. Whereas I wish to go to the specified tab 'OPERATIONS'.
Can any one help me, as to how to resolve this issue ?
Thanks in advance.

Sridher,
I have the similar requirement. but in my case its COSTS tab. Could you please provide the code you have used for this to work?
I used standard "call transaction with mode 'E' ". This seems to be working but I am not pleased by my effort. Is there any proper way that you might have followed ?
Greatly appreciated your help.
Regards,
Reddy

Call Transaction - both Skip first screen and USING in one

Hi Experts,
I have to call a Tcode which is for a report painter report and I have to fill the selection screen parameters for that report. Nothing is mandatory but it will be filled in select option field.
My issue is I can only call this Tcode with all the parameters when I use USIING with BDC. but I also want to skip the selection screen so that only the final output gets displayed.
I tried SET PARAMETER ID but I am filling the select-options range from a custom table so don't know how to achieve that.
Any suggestions !!!

See here: [sdn wiki - Batch input FAQ - Is it possible to simulate AND SKIP FIRST SCREEN using BDC?|http://wiki.sdn.sap.com/wiki/display/ABAP/BatchInputFAQ#BatchInputFAQ-IsitpossibletosimulateANDSKIPFIRSTSCREENusingBDC%3F]

Call Transaction and skip first screen in SE37

Hi All,
I want call transaction SE37 and skip first screen of it. Is it possible through the statemen Call transaction 'SE37' and skip first screen ?.
Of course I have populated the parameter id 'LIB' before this statement but it is not working. Though I have found several posts with this solution but it's not working for me. Could anyone please let me know if this can be done using this statement or there are any other additions required along with this statement or it is not at all possible to achieve this functionality.
Thanks in advance !!.

Solved! without a solution? very funny.
In somewhere of second screen related bdcdata, intensionlly make a mistake to force the system throws the error and the call the trasnaction with mode 'E'. This will solve the issue.
perform bdc_field using 'BDC_CURSO' " I removed letter R in 'BDC_CURSO'
'ISEG-ERFMG(01)'.
CALL TRANSACTION 'XXXX' USING BDCDATA MODE 'E'.
Thanks.
Suresh Yerra.

Reg XK03 skip first screen

Hi All,
I have a requirement in my custom program when I double click on vendor number it should navigate to the transaction XK03 by skipping first screen.I have done code for this using set parameter for vendor and compcode and purchasing organization but the problem is the program should select purchasing data checkbox also in the first screen before skipping that.So how to pass default check for purchasing data check box?
We tried to do this also using BDC but the problem is with modes since we have only 3 modes A,N,E.I want to skip the first sceen and go to the 2nd screen which is not possible in BDC.
Please suggest somebody how to do this?
Regards
Mahesh

data : opt like CTU_PARAMS.
 opt-DISMODE = 'E'.
 CLEAR : it_bdc.
 REFRESH : it_bdc.
 PERFORM populate_bdc_data USING 'X' 'SAPMF02K' '0101'.
 PERFORM populate_bdc_data USING space 'BDC_CURSOR'
 'RF02K-LIFNR'.
 PERFORM populate_bdc_data USING space 'BDC_OKCODE'
 '/00'.
 PERFORM populate_bdc_data USING space 'RF02K-LIFNR'
 l_final-lifnr.
 PERFORM populate_bdc_data USING space 'RF02K-BUKRS'
 '1000'.
 PERFORM populate_bdc_data USING space 'RF02K-EKORG'
 l_final-ekorg.
 PERFORM populate_bdc_data USING space 'RF02K-D0310' 'X'. <-- for checkbox ..
 CALL TRANSACTION 'XK03' USING it_bdc OPTIONS FROM opt.

Dont make skip first screen

i have this type :
begin of my_string,
invoice LIKE vbrp-vbeln,
 vbeln LIKE veda-vbeln,
 keydate LIKE vbrp-erdat,
 END OF my_string.
but when i click on this data in ALV grid
i get the next transaction but whitout the number
this is the code
" ELSEIF rs_selfield-fieldname EQ 'INVOICE'.
 READ TABLE mdeqp_alv INDEX rs_selfield-tabindex.
 SET PARAMETER ID 'INV' FIELD mdeqp_alv-invoice.
 CALL TRANSACTION 'VF03' AND SKIP FIRST SCREEN .
 ELSEIF rs_selfield-fieldname EQ 'VBELN'.
 READ TABLE mdeqp_alv INDEX rs_selfield-tabindex.
 SET PARAMETER ID 'VL' FIELD mdeqp_alv-vbeln.
 CALL TRANSACTION 'VA43' AND SKIP FIRST SCREEN .
 ENDIF.

Yehiel,
Use the method get_select_rows of the class cl_gui_alv_grid.
Sample Coding:
mygrid->get_selected_rows(
 importing
 et_row_no = iRowIndex ).
 read table mdeqp_alv index waRowIndex-rowid. 
 SET PARAMETER ID 'INV' FIELD mdeqp_alv-invoice.
 CALL TRANSACTION 'VF03' AND SKIP FIRST SCREEN .
Like wise, follow for the others.
Thanks
Kam

How to skip first screen while calling transaction

Hi all,
I am using interactive alv.
if i select one line and press details
that must go to another screen.
In that i must skip first screen and directly go to the details of that first screen.
suppose i am using the code as follows
call transaction mm01 and skip first screen
this is giving me error.
how to solve the problem.
thanks and regards,
giri.

hi giri,
For ur requirement, u can use SKIP FIRST SCREEN addition for CALL TRANSACTION Command.
Before this, u have to use SET PARAMETER ID Command to pass the required values for transaction.
Example, In transaction VA01, we have to set parameter AUN to pass the sale order number to the transaction.

AT LINE-SELECTION .
SET PARAMETER ID 'AUN' FIELD w_vbeln.
CALL TRANSACTION 'VA01' AND SKIP FIRST SCREEN .
where w_vbeln contains the sale ordre number. Now VA01 runs for this sale order number..... And AUN is the PARAMETER to be set before calling VA01 TCODE.
similarly, check the PARAMETER associated with MM01 Tcode and initialize that parameter and call the code in the similar way.
To check parameter Id of MM01,
1) Enter MM01 Transaction
2) Press F1 on Material Field
3) Select Technical Info
4) u can find Parameter ID associated with this field.
check these links for full details.
call transaction...
http://help.sap.com/saphelp_47x200/helpdata/en/78/21761c51ce11d189570000e829fbbd/frameset.htm
at line selection,
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dba2c435c111d1829f0000e829fbfe/frameset.htm
get/set parameter:
http://help.sap.com/saphelp_nw04/helpdata/en/5b/7bc3775d1111d295ad0000e82de14a/frameset.htm
Reward me if useful........
Harimanjesh AN

Submit "and skip first screen"

hello!
is there an option for submit-command like "and skip first screen" for call transaction?
i would like to start a programm without displaying the selection screen (parameters are provided by submit with ...).
the parameters of the new programm aren't set/get parameters (sap-standard-pgm) therefore call transaction won't work.
thanks
matthias

Hi,
In ur question itself u have given a solution
1. Combination of variant and WITH
DATA: RANGE_LANGU TYPE RANGE OF SY-LANGU,
 RANGE_LANGU_WA LIKE lINE OF RANGE_LANGU.
PARAMETERS: MSG_FR LIKE T100-MSGNR,
 MSG_TO LIKE T100-MSGNR.
MOVE: 'I' TO RANGE_LANGU_WA-SIGN,
 'BT' TO RANGE_LANGU_WA-OPTION,
 'D' TO RANGE_LANGU_WA-LOW,
 'I' TO RANGE_LANGU_WA-HIGH.
APPEND RANGE_LANGU_WA TO RANGE_LANGU.
MOVE: 'EQ' TO RANGE_LANGU_WA-OPTION,
 'E' TO RANGE_LANGU_WA-LOW.
APPEND RANGE_LANGU_WA TO RANGE_LANGU.
SUBMIT REPORT00
 USING SELECTION-SET 'VARIANT1'
 WITH MSG BETWEEN MSG_FR AND MSG_TO
 WITH LANGU IN RANGE_LANGU.
In REPORT00, all parameters and SELECT-OPTIONS take their values from the variant VARIANT1.Only MSG and LANGU take the values that are explicitly passed.
Examples
2. Combination of variant, WITH SELECTION-TABLE, and explicit WITH clauses.
DATA: SELTAB TYPE TABLE OF RSPARAMS,
 SELTAB_WA LIKE LINE OF SELTAB.
MOVE: 'LANGU' TO SELTAB_WA-SELNAME,
 'S' TO SELTAB_WA-KIND, " SELECT-OPTION
 'I' TO SELTAB_WA-SIGN,
 'BT' TO SELTAB_WA-OPTION,
 'D' TO SELTAB_WA-LOW,
 'I' TO SELTAB_WA-HIGH.
APPEND SELTAB_WA TO SELTAB.
MOVE: 'E' TO SELTAB_WA-SIGN,
 'EQ' TO SELTAB_WA-OPTION,
 'F' TO SELTAB_WA-LOW,
 SPACE TO SELTAB_WA-HIGH.
APPEND SELTAB_WA TO SELTAB.
CLEAR SELTAB_WA.
MOVE: 'ARBGB' TO SELTAB_WA-SELNAME,
 'P' TO SELTAB_WA-KIND, " PARAMETER
 'XX' TO SELTAB_WA-LOW.
APPEND SELTAB_WA TO SELTAB.
SUBMIT REPORT00
 USING SELECTION-SET 'VARIANT1'
 WITH ARBGB CP 'A*'
 WITH SELECTION-TABLE SELTAB
 AND RETURN.
In REPORT00, all parameters and SELECT-OPTIONS take their contents from the variant VARIANT1except LANGU, which takes its contents from SELTAB, and ARBGB, which takes the value that was explicitly passed.
I got this from ABAP help.
Hope this helps.
Thanks & Regards,
Judith.

Skip first screen

Similar Messages

Maybe you are looking for