Skip logic not functioning for "Other" choice

I have just noticed a possible bug: I have a multiple selection field and I opt to "include 'other' choice" in the field options.  So now I have my list of options, plus an "Other" option that requires the user to fill in a text box to specify what "other" means.  Later on, when I try to apply skip logic to the "Other" choice, the skip logic doesn't seem to work--the "other" option isn't triggering the skip logic.  I'll attach a screenshot of the skip logic to demonstrate that it's set up correctly (to the best of my knowledge):
I'm in Chrome and I've tried this with "Other" as the only criteria and also with "Other" plus additional responses options as criteria in an "if any" logic setup.  The additional options trigger the skip logic correctly, but if "Other" is the only selection, it doesn't seem to work for me.
Thanks for any advice or input!

Hi,
This is a known issue that will be addressed in an upcoming release of FormsCentral. Please refer to the following forum thread for more information and a possible work-around:
http://forums.adobe.com/message/6139197
Regards,
Brian

Similar Messages

  • HT201077 As of recently any photos I add to a shared photostream will not update for others. Only I can see them. How come others sharing this photo stream are not getting the new photos?

    As of recently any photos I add to a shared photostream will not update for others and I don't see the updated photos on my other devices. Only I can see them from the device that i've posted from. How come others sharing this photostream are no longer getting the new photos? My iphone (the device i'm adding from) shows 20 pictures in this shared photostream and yet 4 other people that I share this photostream album with and my ipad only show 12 photos. For the past week I keep adding photos thinking people will see them but it just won't update the new ones. Any ideas how to fix this?

    You can stop new photos being automatically added to Photostream in iPhoto from iPhoto preferences > Photostream.

  • Derivation Rules Not Working for other company codes

    Hi,
    I have 5 Company codes and only for one FM was activated. now i want to activate FM for all 5 company codes. for which i have assigned the FM area to all 5 company codes. I have also assigned the derivation strategy to all 5 company codes as well. now when i post a transaction for any other company code derivation rules is not being process hence no commitment item or fund center is derived. however for the original company code for which FM was activated in the first derivation rule are working fine means system is deriving commitment item and fund center. can any one tell me why derivation rules are not working for other company codes? do i have to add Company code in source field of derivation strategy? could this be the reason? because in beginning there was no other company code so we did not included any company code field in the first place.
    Regards,

    Faizan,
    Go to  Funds Management Government> Actual and Commitment Update/Integration> Activate/Deactivate Funds Management.
    In the screen create an entry for each Company Code and Funds Management Area combination.
    Activate the AA Derivtn flag if you want the derivation to be called and the Update flag if you want to update commitments and actuals in FM.
    Thanks
    Shyam

  • Some times firefox does not opens facebook and google pages and this does not happen for other sites. Iam Currently using windows xp and using 3.6.3 Firefox version.Please help.

    Some times the fire fox does not open google and facebook pages but it does not happen for other sites. Iam currently using Windows xp and iam using Mozilla Fire fox 3.6.3 .Please help
    == URL of affected sites ==
    http://www.facebook.com,www.google.com

    You can try a direct connection and select No Proxy in the connection settings.
    You can find the connection settings in "Tools > Options > Advanced : Network : Connection"
    Also do a malware check with a few malware scan programs.<br />
    You need to use all programs because each detects different malware.<br />
    Make sure that you update each program to get the latest version of the database before doing a scan.
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

  • IPad mail sending one page PDF documet as a picture. This picture is not viewing for other people who email open. this problem is from iBooks and from Pages.  (if I sending one page document from Pages from iPhone is ok - PDF)

    iPad mail sending one page PDF documet as a picture. This picture is not viewing for other people who email open. this problem is from iBooks and from Pages.
    (if I sending one page document from Pages from iPhone is ok - PDF. If I sending one page document from iPad is mistake. )

    Turn off rich text in your email signature. Delete images too, if any.

  • HT204032 Why is Powernap not available for other MB's such as the MBP mid 2010 model for example?

    Why is Powernap not available for other MB's such as the MBP mid 2010 model for example?

    I have a 2010 MBP 6,2 with an aftermarket SSD. My machine gets mail and notifications while asleep, but I do not have any powernap pref box in energy savings under 10.9.1
    I do not have an Apple SSD. I have a Crucial M4-CT512M4SSD2
    Apple did replace my MB last Fall under the video fault problem (for free after 3 years.....thanks Apple), but it stills identifies as a 6,2  Boot ROM  MBP61.0057.B0F
    I wish I could shut off this powernap feature, but have no access to it.

  • Hot Fix for Skip Logic not working on mobile devices.  Me 1 - Adobe Support 0!

    This is just a tip to anyone having the same issue.  It seems that most mobile devices cannot process Skip Logic rules tied to a dropdown menu option.  It is important to know if you never tested this on a mobile device for youself so I strongly encourage that you check this on both Android and iPhone.  The single and multi selections DO work so that is the way to get around this issue.  Here is a sample of our actual web application www.gmcloans.com/quickquote.html with the functional fields.  I created a simple sample test application https://adobeformscentral.com/?f=n8qBqcnKMxR5mRmbAPwkqQ (with QR code for quicker access if you're not on a device now) utilizing all of the selection features for you to test with other devices to help save you the time I lost.
    Pro:  It works.
    Con:
    Lost time...searching for this only forum (at least that I could find) with a solution and having rearranging your application. 
    Uniformity and compaction....If you have a long dropdown list dependent on Skip Logic rules you will have to get confortable with having a lot more information spralled across your application.  
    Adobe Support...To my frustration I had to spend two (2) 20+ minute phone calls with support about this issue only for them to tell me that they don't have a fix and never had anyone express this particular conflict issue with them. 
    I hope this helps you.
    Brian Taylor

    I am still trying to find a version of your device here. The closest I got was a HTC Inspire 4G /w Android 2.3 and the skip logic on the dropdown worked correctly. I'll get back to you once I get to try it on a HTC DNA /w Android 4.1.1.
    Meanwhile were you able to try your form on any other mobile device? I know that you want this to work on your device and we will fix this if there is a bug there... but I'm just curious if you were able on your side to see it work on a mobile device at all.
    Gen

  • Auto_lexer (stemming) not working for other languages(other than english)

    Hi All,
    We are planning to use AUTO_LEXER instead of MULTI_LEXER and observed that stemming is not working for German where as it is working for English when I use AUTO_LEXER. I even used query templates but of no use.
    But when i use MULTI_LEXER, creating sub lexers for German and Enlgish, Stemming is working for German also after changing the session language and setting stemmer of wod list to German (Which is expected).
    Following is the code for AUTO_LEXER creation:
    CREATE TABLE test_auto_lexer(pkey NUMBER(5,0),
    lang_index VARCHAR2(3),
    content_text CLOB,
    CONSTRAINT test_auto_lexer_pk primary key (pkey))
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (1,'eng','I drive a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (2,'eng','I drove a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (3,'eng','I have driven a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (4,'eng','Just check for other things')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (5,'eng','always drive a car')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (6,'eng','it is nothing')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (7,'ger','Ich fahre ein Fahrrad')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (8,'ger','Ich fuhr ein Fahrrad')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (9,'ger','Ich habe ein Fahrrad gefahren')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (10,'ger','Aktivieren Sie einfach für andere Dinge')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (11,'ger','immer Auto fahren')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (12,'ger','es ist nichts')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (13,'ger','sprechen')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (14,'ger','sprach')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (15,'ger','gesprochen')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (16,'ger','tale')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (17,'ger','Indlæg')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (18,'ger','tales')
    BEGIN
    ctx_ddl.create_preference('auto_lexer1', 'auto_lexer');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','index_stems','yes');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','language','danish english german');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','alternate_spelling','german');
    END;
    CREATE INDEX test_auto_lexer_ix1
    ON test_auto_lexer(content_text)
    INDEXTYPE IS ctxsys.context
    PARAMETERS ('datastore ctxsys.direct_datastore filter ctxsys.null_filter lexer auto_lexer1')
    select to_char(content_Text) from test_auto_lexer where contains(content_text,
    '<query>
    <textquery lang="ger" grammar="context">
    $fahren
    </textquery>
    <score datatype="integer"/>
    </query>') > 0
    this doesnt work even after changing the session language. My default Sesson language is AMERICAN.
    Could any one help me with this, in case I am missing something here. I would be really thankful.
    Edited by: Nagendra Prasad on Jan 23, 2010 12:05 AM

    In the future, please begin a new thread for a new question and provide a link to a related question.
    According to the online documentation, Oracle only supports stemming for English, Dutch, French, German, Italian, Spanish, and Japanese. Oracle does not support Russian stemming, although you may have gotten some accidental results, due to identifying it as a different language and applying stemming rules for that language. The following manual sections show the languages available for the index_stems attribute of the basic_lexer and stemmer attribute of the basic_wordlist:
    Basic_lexer attributes:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#CIHHBAAD
    Basic_wordlist attributes:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#g1019326
    Also, please see the following note:
    Features not available in 11.2.0.3:
    http://docs.oracle.com/cd/E11882_01/readmes.112/e22488/toc.htm#BABDGGDB
    "Certain Oracle Text functionality based on third-party technologies, including AUTO_LEXER and CTX_ENTITY, have been disabled in this release (reference Bug 12618046). For BASIC_LEXER, the usage of the INDEX_STEMS attribute values that depend on third-party technologies, is also affected. If this impacts an existing application, contact Oracle Support Services for guidance."
    Also, the auto_lexer has been replaced by the world_lexer, which only has one attribute:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#BHCJEGFJ
    I don't work for Oracle, so I don't know why they do things the way they do.
    So, you need to stick with the basic_wordlist for stemming, not the lexers. However, you may get better performance by combining the multi_lexer with the basic_wordlist, as the multi_lexer eliminates time spent on automatic language detection. But, you need to remember not to use the index_stems with your lexer, since it will conflict with the wordlist. I am not experiencing any time problems as you have. Please see the demo below. I have provided the whole script below that, so that you can reproduce it on your system. If you still have problems, then it may be due to differences in versions.
    -- demo:
    SCOTT@orcl_11gR2> select * from v$version
      2  /
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE     11.2.0.1.0     Production
    TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    5 rows selected.
    SCOTT@orcl_11gR2> select value from v$nls_parameters
      2  where  parameter = 'NLS_CHARACTERSET'
      3  /
    VALUE
    AL32UTF8
    1 row selected.
    SCOTT@orcl_11gR2> DROP TABLE news
      2  /
    Table dropped.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> CREATE TABLE news
      2    (pkey            NUMBER,
      3       lang            VARCHAR2 (2),
      4       short_content  CLOB)
      5  /
    Table created.
    SCOTT@orcl_11gR2> INSERT ALL
      2  INTO news (pkey, lang, short_content)
      3    VALUES  (1, 'en', 'I drive a bike.')
      4  INTO news (pkey, lang, short_content)
      5    VALUES  (2, 'en', 'I drove a bike.')
      6  INTO news (pkey, lang, short_content)
      7    VALUES  (3, 'en', 'I have driven a bike.')
      8  INTO news (pkey, lang, short_content)
      9    VALUES  (4, 'en', 'I always drive a car')
    10  INTO news (pkey, lang, short_content)
    11    VALUES  (5, 'en', 'This is nothing')
    12  INTO news (pkey, lang, short_content)
    13    VALUES  (6, 'de', 'Ich fahre ein Fahrrad.')
    14  INTO news (pkey, lang, short_content)
    15    VALUES  (7, 'de', 'Ich fuhr ein Fahrrad.')
    16  INTO news (pkey, lang, short_content)
    17    VALUES  (8, 'de', 'Ich habe ein Fahrrad gefahren.')
    18  INTO news (pkey, lang, short_content)
    19    VALUES  (9, 'de', 'Ich habe immer ein Auto fahren.')
    20  INTO news (pkey, lang, short_content)
    21    VALUES  (10, 'de', 'Es ist nichts.')
    22  SELECT * FROM DUAL
    23  /
    10 rows created.
    SCOTT@orcl_11gR2> BEGIN
      2    -- word list:
      3    ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
      4    ctx_ddl.set_attribute      ('my_wordlist',   'stemmer',           'auto');
      5    -- english lexer:
      6    ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
      7    -- german lexer:
      8    ctx_ddl.create_preference ('german_lexer',  'basic_lexer');
      9    ctx_ddl.set_attribute      ('german_lexer',  'composite',       'german');
    10    ctx_ddl.set_attribute      ('german_lexer',  'alternate_spelling', 'german');
    11    ctx_ddl.set_attribute      ('german_lexer',  'mixed_case',       'no');
    12    ctx_ddl.set_attribute      ('german_lexer',  'base_letter',       'yes');
    13    -- multi_lexer:
    14    ctx_ddl.create_preference ('global_lexer',  'multi_lexer');
    15    ctx_ddl.add_sub_lexer      ('global_lexer',  'default',            'english_lexer');
    16    ctx_ddl.add_sub_lexer      ('global_lexer',  'german',            'german_lexer');
    17  END;
    18  /
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> create index search_news
      2  on news (short_content)
      3  indextype is ctxsys.context
      4  parameters
      5    ('lexer            global_lexer
      6        language column  lang
      7        wordlist       my_wordlist')
      8  /
    Index created.
    SCOTT@orcl_11gR2> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> COLUMN short_content FORMAT A30
    SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
      2  /
    Session altered.
    SCOTT@orcl_11gR2> set timing on
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$drive') > 0
      3  /
          PKEY LA SHORT_CONTENT
             1 en I drive a bike.
             2 en I drove a bike.
             3 en I have driven a bike.
             4 en I always drive a car
    4 rows selected.
    Elapsed: 00:00:00.05
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$drove') > 0
      3  /
          PKEY LA SHORT_CONTENT
             1 en I drive a bike.
             2 en I drove a bike.
             3 en I have driven a bike.
             4 en I always drive a car
    4 rows selected.
    Elapsed: 00:00:00.05
    SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
      2  /
    Session altered.
    Elapsed: 00:00:00.01
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$fahr') > 0
      3  /
          PKEY LA SHORT_CONTENT
             6 de Ich fahre ein Fahrrad.
             7 de Ich fuhr ein Fahrrad.
             8 de Ich habe ein Fahrrad gefahren.
             9 de Ich habe immer ein Auto fahren
    4 rows selected.
    Elapsed: 00:00:00.07
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$fuhr') > 0
      3  /
          PKEY LA SHORT_CONTENT
             6 de Ich fahre ein Fahrrad.
             7 de Ich fuhr ein Fahrrad.
             8 de Ich habe ein Fahrrad gefahren.
             9 de Ich habe immer ein Auto fahren
    4 rows selected.
    Elapsed: 00:00:00.16-- script for you to reproduce the demo on your system:
    select * from v$version
    select value from v$nls_parameters
    where  parameter = 'NLS_CHARACTERSET'
    DROP TABLE news
    EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
    EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
    EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
    EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
    CREATE TABLE news
      (pkey           NUMBER,
       lang           VARCHAR2 (2),
       short_content  CLOB)
    INSERT ALL
    INTO news (pkey, lang, short_content)
      VALUES  (1, 'en', 'I drive a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (2, 'en', 'I drove a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (3, 'en', 'I have driven a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (4, 'en', 'I always drive a car')
    INTO news (pkey, lang, short_content)
      VALUES  (5, 'en', 'This is nothing')
    INTO news (pkey, lang, short_content)
      VALUES  (6, 'de', 'Ich fahre ein Fahrrad.')
    INTO news (pkey, lang, short_content)
      VALUES  (7, 'de', 'Ich fuhr ein Fahrrad.')
    INTO news (pkey, lang, short_content)
      VALUES  (8, 'de', 'Ich habe ein Fahrrad gefahren.')
    INTO news (pkey, lang, short_content)
      VALUES  (9, 'de', 'Ich habe immer ein Auto fahren.')
    INTO news (pkey, lang, short_content)
      VALUES  (10, 'de', 'Es ist nichts.')
    SELECT * FROM DUAL
    BEGIN
      -- word list:
      ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
      ctx_ddl.set_attribute     ('my_wordlist',   'stemmer',            'auto');
      -- english lexer:
      ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
      -- german lexer:
      ctx_ddl.create_preference ('german_lexer',  'basic_lexer');
      ctx_ddl.set_attribute     ('german_lexer',  'composite',          'german');
      ctx_ddl.set_attribute     ('german_lexer',  'alternate_spelling', 'german');
      ctx_ddl.set_attribute     ('german_lexer',  'mixed_case',          'no');
      ctx_ddl.set_attribute     ('german_lexer',  'base_letter',         'yes');
      -- multi_lexer:
      ctx_ddl.create_preference ('global_lexer',  'multi_lexer');
      ctx_ddl.add_sub_lexer     ('global_lexer',  'default',             'english_lexer');
      ctx_ddl.add_sub_lexer     ('global_lexer',  'german',              'german_lexer');
    END;
    create index search_news
    on news (short_content)
    indextype is ctxsys.context
    parameters
      ('lexer            global_lexer
        language column  lang
        wordlist         my_wordlist')
    EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
    COLUMN short_content FORMAT A30
    ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
    set timing on
    select * from news
    where  contains (short_content, '$drive') > 0
    select * from news
    where  contains (short_content, '$drove') > 0
    ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
    select * from news
    where  contains (short_content, '$fahr') > 0
    select * from news
    where  contains (short_content, '$fuhr') > 0
    /

  • Default logic not running for a particular team

    Hello,
    I have a financial consolidation application in BPC 7.5 NW. We have a particular problem, whereby the default logic is not running for one team when they are uploading data. The error message is "Error running default logic. Error converting records. The root element is missing".
    Users in other teams are not affected by this and they are able to upload data successfully without any problems and are able to view converted records.
    Can someone please explain how this is possible in BPC?
    Also, our development consultant created 2 copies of the default logic in the Finance application. In the admin consol, one is called "Default.LGF" and the other one "DEF BU 9 Mar 2011.LGF". Can anyone kindly explain whether it is possible to have 2 copies of the default logic and if so, how does BPC decide which one to run.
    In both versions of the default logic, the following code is inserted for FX translation:
    // Query 6  - Perform currency translations - run currency translation stored procedure
    *XDIM_MEMBERSET CATEGORY=%CATEGORY_SET%
    *XDIM_MEMBERSET TIME=%TIME_SET%
    *XDIM_MEMBERSET ENTITY=%ENTITY_SET%
    *XDIM_MEMBERSET MEASURES=YTD
    *RUN_PROGRAM CURR_CONVERSION
          CATEGORY = %CATEGORY_SET% 
          CURRENCY = GBP
          TID_RA = %TIME_SET%
          RATEENTITY = GLOBAL
          OTHER = [ENTITY = %ENTITY_SET%]
    *ENDRUN_PROGRAM
    *COMMIT
    Thank you very much.
    Edited by: kashifmehmood on Jun 17, 2011 4:12 PM

    Hi
    1.Users in other teams are not affected by this and they are able to upload data successfully without any problems and are able to view converted records.
    One of the reason may be there are some secured dimensions involved like Entity, which is not assigned to the team. Refer to the HTG document below:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207995e8-deb8-2d10-3cb9-8ab146c95a09?quicklink=index&overridelayout=true
    2.Also, our development consultant created 2 copies of the default logic in the Finance application. In the admin consol, one is called "Default.LGF" and the other one "DEF BU 9 Mar 2011.LGF". Can anyone kindly explain whether it is possible to have 2 copies of the default logic and if so, how does BPC decide which one to run.
    In my opinion your consultant created "DEF BU 9 Mar 2011.LGF" and maintained the logic in that logic file. To run the logic by default, he has to call the earlier logic file in DEFAULT.LGF.
    *INCLUDE DEF BU 9 Mar 2011.LGF ( Nothing wrong in  keeping the entire logic, but it is not required)
    Logic file ""DEF BU 9 Mar 2011.LGF" can be called by DM packages.
    Thanks

  • Fields are bold for some users, not bold for others.

    Post Author: karene
    CA Forum: General
    I have a report in Crystal reports XI using BusinessObjects. One of my users is complaining that one of the fields is bold. But it's not set to bold in the report, and when I run the same report, called the same way, with the same data, the field is not bold.  We had a note about printer drivers, and he ran through our help on that, but it didn't change anything.
    The field is actually a subreport, but I looked at that, and it is a straight database field (SQL Server 2000, memo type), not a formula, and it is not set to bold anywhere in Crystal, at least not that I can see. And besides, it doesn't print bold for me. He saved to a pdf and sent it to me, and it is bold. I saved the same data report to a pdf and it is not bold.
    Does anyone have any ideas for a direction I should look? I think I recall seeing this field bold at some time on my machine, which makes me think it has something to do with a difference in Windows between our two machines. But that's pretty vague.
    Here is some additional information. It's not always the same field. Sometimes two fields in a report are bold. It happens for users with both IE6 and IE7, although it's also not happening for some of us with IE6. We can set our IE6 settings to the same, and it happens for one and not for another.
    -Karen

    Post Author: karene
    CA Forum: General
    I'll ask about and check the Acrobat -- but we're using the ActiveX viewer -- so how does that matter?  We've tried changing default printers before running the report, but it doesn't seem to make any difference.  But... when I open the report to edit it, it does complain about me not having the printer that the report sees as a default, so it still may be related to printer drivers.  I think that's a good direction to keep investigating.
    I don't think the customer would like the entire report in bold, but that is an innovative solution!
    I saw a post from about 6 months ago where it seemed like someone had the same problem, but there was no reply or solution.  If I do figure it out (or if your help leads me in the right direction), I'll post the solution.
    Thank you for the reply.
    -Karen

  • Auto To working for one material and not working for other material

    Hi,
    Hope everybody is doing fine.
    I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
    I didn't setup the back ground processing job. Is that is affecting it?
    thanks for any help.
    regrads,
    KHAN

    Thnaks,
    You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
    Appreciate your time charlie

  • My wifi will not detect networks and will not search for other networks when I search for them. Do I need a new iPhone or can I fix it myself?

    My wifi is on and when it tries to find a wifi connection, the gray little circle just keeps spinning and will not detect our home wifi. I have tried to search for it and connect to it manually, but it will not search for the network name. I'm hoping I don't need a new phone so please help.

    The following may have something that will help: http://support.apple.com/kb/TS1398

  • Making Programs "not there" for other account/users...

    I'm not even sure if I'm in the right place for posting this question. If not, my apologies. There are many programs installed on my computer that no one else uses or even knows what it is (I'm the computer savy person) and shows up in their account, like in applications or where ever it may be. So my question is, can I make it so that it's not there for that person to use, and only on my account for me to use (I am the administrator of the computer). Also, will it save any space on my HD if I made the programs "not there" on other accounts? Thanks.

    1. If you dragged the application onto your hard disk, create a new Finder window and click on the item in the sidebar with the house icon. Create a new folder and move the applications in here. Some application updaters may expect the application to be located in a specific place; this isn't an issue for updates you apply by dragging files into folders.
    2. No.
    (16972)

  • Developer key is not functioning for sap netweaver 2004s trail version

    hi,
    when i was creating a controller class in bsp..its asking for a developer key...i have also extended the license..and i have also used the key which is specified in this page below...kindly refer this link...give me a solution inorder to edit repository objects
    http://service.sap.com/sap/bc/bsp/spn/minisap/minisap.htm.

    Hi,
    check Developer key not valid for NSP ??.
    Peter
    Points always appreciated

  • Shift and CMD keys not functioning with other keys

    System Specs:
    15-inch, Early 2011
    Processor  2.2 GHz Intel Core i7
    Memory  16 GB 1333 MHz DDR3
    Software  OS X 10.8.5 (12F37)
    Hello,
    My issue is with the keybaord of my Macbook Pro. Just yesterday I noticed the following problems with my keyboard.
    Error Issue:
    Right Shift key+D
    Right Shift key+C
    Right Shift key+E
    Left CMD+C
    Are all not functioning. I don't know what happened, I ran the keyboard viewer and tested all these keys out, the weird thing is that I can use the alternate keys on right and left, like shift and CMD.
    Please help your urgent feedback is appreciated.

    I suggest trying the following (check after each step):
    1) Reboot
    2) Reset PRAM using this procedure: http://support.apple.com/kb/HT1379
    3) Reset the SMC: http://support.apple.com/kb/ht3964
    4) check in a different user space (maybe it's a preferences problem)
    5) take to Apple store

Maybe you are looking for