Skip Recovery HD; make bootable clone of 2011 Mac Mini with 10.7.1 ?

Can I just skip Recovery HD palaver and make a bootable clone of 2011 Mac Mini with 10.7.1 ?
I have a large FireWire800 drive, and can partition a few gigs off on it with a GUID map.
What should I use to clone my current OSX 10.7.1 onto the external drive, and will this work?
Thanks

I finished setting up my Mac Mini today (52 GB of sys, apps and stuff), and used Carbon Copy Cloner to make a clone onto my external disk.
Works Great!
Now I not only have an Emergency boot Lion disk, but I also have all those apps and prefs and things in case I need to: Work Now!

Similar Messages

4K videos stutter on 2011 Mac Mini with AMD 6630

I have a Dell 4K monitor and while it works perfectly with MDP to MDP cable @ 2160p and plays back videos up to 1080p with no issues, trying to play 4K movies or trailers results in choppy, video that is virtually unplayable. Is this a function of the video card or a combo of the i5 and video card. Of course videos play correctly on my Windows gaming laptop.
Cheers,

From the 2011 Mac Mini Tech specs:
Video Support
Works with almost any display or HDTV.
Thunderbolt port with support for up to 2560-by-1600 resolution
HDMI port with support for up to 1920-by-1200 resolution
DVI output using HDMI to DVI Adapter (included)
Support for dual display and video mirroring

Anyone know how to get external iSight camera sound to function on 2011 Mac mini with Lion?

I recently helped my Mom upgrade from an older Mac mini to a 2011 model, and the external iSight camera shows video but has no sound. She can see and hear me through both iChat and FaceTime, but I can only see her.
I have checked the source for the mic in FaceTime and iChat preferences as well as the System Preferences, and I can see the monitor responding to input, but it is not sending the sound.

(1) You're welcome! We will be eager to see how it works for you.
(2) If iChat can't access your external iSight, there is something wrong.
• If Apple's http://support.apple.com/kb/HT2090
   suggestions do not help you, continue with the following.
• Use Disk Utility to repair permissions and then
   download and apply the 10.7.2 Combo Update:
     http://support.apple.com/kb/DL1459
• Repair permissions again immediately following the system restart
   that completes the Combo update.
(3) If your mini does not have a Firewire 400 port, also check
     your connections. Options I know for ways to connect
     a FW400 external iSight to a FW800 Mac port:
• This Firewire 400-800 cable can work: http://store.apple.com/us/product/TU942LL/A (I use this one.)
• Some report that this low-priced alternative cable works:
http://www.newegg.com/Product/Product.aspx?Item=N82E16812189097
• To use your FW400 6pin-6pin cable, you can use
    a 6pin-9pin adapter like one of these: http://tinyurl.com/ydsbb6m
   (I successfully use this one, too.)

2011 Mac Mini, 10.8.3, SSD - System CPU at constant 10%, frequent 0.5 sec cursor freezes

Hi. I have a Mid-2011 Mac Mini with 8GB of RAM. I have an SSD installed in it as the primary drive, along with another internal 2TB drive and an external USB 2TB drive for media. This machine is mostly used as a media server and player. It's been running Mountain Lion since I bought it (refurb) last year. I upgraded to 10.8.3 as soon as that came out, and was running for a while without any problems. This evening, though, I started to notice some problems.
The main issue is that the CPU (well, one core) seems to be constantly under load. Under Activity Monitor I'm watching the system load (but not user load) hover between about 8% and 12%, all of the time. But looking at the program list, I don't see anything taking up more than about 2% of CPU, and that is taken up by Activity Monitor itself.
The annoying way that this manifests itself in the UI is that if I'm just randomly moving the cursor around in a circle, I can watch it periodically hang and freeze for about half of a second every 3-4 seconds or so. Meanwhile, everything else on the system also seems to freeze up for about half a second at the same time, which makes watching Netflix extremely irritating. (With Netflix the sound plays as normal, but the video freezes briefly every few seconds - I verified this in both Firefox and Chrome so I doubt it's a browser thing.)
I've already tried some troubleshooting steps myself. (None of this has worked yet.)
I saw a lot of messages in console about "mdworker deny mach-lookup com.apple.ls.boxd", which googling around for led me to this page; per the instructions there I booted into safe mode, waited a bit and rebooted, and now I don't see those messages any more. (I didn't mess with the sandbox.sb file, about which, really? Apple implemented this in Scheme or something?) Just to be on the safe side, though, I disabled Spotlight indexing with sudo mdutil -a -i off.
I opened Disk Util and ran a verify on all three disks, no errors. I found one or two permissions that needed repairing on the startup SSD and repaired them. The problem persisted. I also cleared out my caches with Maintenance while I was at it.
As a side note, even when I rebooted in safe mode, I was still seeing the same behavior (periodic half-second mouse freezes, system CPU averaging a constant 10% or so in Activity Monitor).
I also spent some time reading this other thread which looked like it had some very useful advice (unlike that poster, though, my Spotlight processes aren't crashing). So I went ahead and followed Linc Davis's first set of instructions in that thread. Here's what I've got for steps 1 and 2.
1. Activity monitor
Highest-CPU process is Activity Monitor at about 1-2% CPU
CPU: User 1%, system ~10%, idle ~90%
System memory: Page outs 0, swap used 0 bytes
Disk activity: Reads in/sec 0, Writes out/sec 0 (these infrequently spike up to about 40 or 50 max)
2. System log
I put up a gist for this here. It's my last 50 messages or so, probably some are coming from the most recent reboot. I can see the "IOHIDSystem cursor update overdue. Resending" messages which I presume are linked to my cursor freezes, but nothing else looks obviously suspicious to me. The stuff about "menucracker" is down to MenuMeters; I uninstalled it and rebooted at one point just to check, but it didn't seem to make a difference so I reinstalled it.
As far as kexts go, the only one I had that wasn't Apple was SoundFlower. I actually need that one, I use it to stream files from Plex, but I went ahead and uninstalled it anyways, and it didn't make a difference. My launchd lists start up sickbeard, sabnzbd, and plex, but I've manually quit all of those and the problem persists, so I highly douby any of them are to blame.
Any advice greatly appreciated. Is there a better way that I can see what exactly is causing the high system CPU load, like can I list processes by number of kernel calls or something? I did try top and ps but I didn't see anything obviously different from Activity Monitor in their output.

Nope, I don't have a "/Users/charon/Library/Mobile Documents" directory, let alone anything underneath it. Is that like an iCloud thing or something? I tend to avoid the Apple-supplied services when I can (I don't use iTunes either unless I can help it).
As an update, as of about two days later this problem seems to have solved itself. Possibly sleeping and waking did something to it (though that seems unlikely given how many times I rebooted), or else there was just some long-*** kernel process that finally worked itself out. But my system CPU is back down to normal and the cursor freezes are gone.
??? it is a mystery! ???

Using a HDMI Only Monitor with 2011 Mac Mini i5 2.3

Hi, Just Wondering if anyone has experience with this...
I have searched High and low and cannot work out if the issues with this are fixed or still happening to people.
I am looking a connecting the 2011 Mac Mini with HDMI port directly to HDMI port of a third party monitor but the ones Iam interested in (and are in my price range!) seem to have only HDMI and sometimes VGA also. If I connect the cable directly from the mac to the monitor are there issues with resolutions, wake from sleep, colours being bad/off etc? Is it recommended to only use DVI from the 2011 Mac Mini?
Just need to check this before buying a new monitor and I cant seem to find the answers anywhere so any help would be greatly appreciated! Thanks in advance!
Steve

Yes, you can connect an HDMI monitor directly up to a 2011 using an HDMI cable.
Look at > http://manuals.info.apple.com/en_US/mac_mini_mid2011_ug.pdf in Chapter 1 on Page 15 of the User Guide.

How much Ram can I install in a mid 2011 mac mini, 2.3Ghz?

I have a mid 2011 mac mini with a 2.3 Ghz processor and the factory installed 2GB of ram. I would like to increase my ram but I am confused about the amount it can handle. everywhere i look on the internet it says it can handle up to 8GB however i spoke with apple care on the phone and they said it can handle up to 16GB. So which is it?
thank you for your help.

Click here.
(115066)

Safari Causing Fan to Spead Up in 2011 Mac Mini

I have a a mid 2011 Mac mini with OS X 10.9 loaded on it. In the past week I have noticed that I can hear the fan running 24 x7 if I leave Safari running. I can look at the activity monitor and it shows Safari using 100% of the CPU. I can reboot the machine and restart Safari and the samething occurs and it doesn't matter what website I go to it still does it. If I quit Safari within 30 sec. the fan starts to slow down and go back to normal. Any ideas what could be causing this?

Hello,
Have you blown the dust out lately?
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Will reinstalling Yosemite on Late 2011 Mac Mini iCore5 4GB DDR3 help improve performance?

I have a late 2011 Mac Mini with icore5 and DDR3 4GB RAM.
To me performance was extremely good with Lion and Mountain Lion. I did love Lion though.
Mavericks improved the performance I did miss on Mountain Lion. But with Yosemite I feel I made a blunder.
My machine doesn't have the capacity to do App Nap effectively, or may be absent.
What happens most of the time is that Safari works extremely fast however all of my system apps behave bizzardly slow.
I thought it could be after initial install and waited for nearly 3 months for the OS to speedup on its own but it lags terribly.
I dont have problems playing iTunes, Safari, facetime and other live meeting apps.
I suspected my harddrive and tested it but that was working fine.
I now only think of reinstalling the OS believing it would speed up. Or should I do a clean install please let me know.

Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy
Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor. Please use copy and paste as screen shots can be hard to read.
Etrecheck – System Information

I need help transferring Bootcamp (Windows XP) from my old Macbook Pro to the new one. How do I make bootable clone of Bootcamp?

Hi I just got a new MacBook Pro I need help transferring Bootcamp (Windows XP) from my old Macbook Pro to my new Macbook Pro Mac OS X 10.7.4 2.6 Ghz Intel Core 17. How do I make bootable clone of Bootcamp?

you can't just move XP even if you took the hard drive and have Windows boot and function.
Apparently there are Windows tools to sanitize the OS and strip all the motherboard drivers and services.
Time to get a supported OS. Don't want to pay, then use 8 for the time until it goes on sale.
There are no drivers for even Vista on 2011 and later Macs.

Performance on a 2011 Mac Mini: Mountain Lion Vs. Lion Server

I have a 2011 Mac Mini running 10.7 server (i7, 8Gb RAB, Dual 500 GB 7200 rpm drives). I use the Mini exclusively as a DAW and am running Logic Express 9 with Native Instrument and Toontrack VST's. I also use a Presonus Firewire mixer.
I am planning my upgrade to 10.8 while I wait for all my VST's to become fully compatible (with 10.8), I wanted know if Mountain Lion will bring significant performance improvements or if am I better off staying with 10.7 Server ?

Let me ask the question again, why are you planning to upgrade to 10.8? What does 10.8 do that 10.7 does not?
Honestly, the first prinicple of a working computer is - if it is stable and you are productive with it, don't change it unless you know why the change is required.
If 10.8 does something that you really need, jump on it. But, before you do, make a full working clone of your 10.7 system disk. This is your insurance if things go south in the upgrade process or your programs are not fully compatible. You can get back to your working system in an hour or so.
Good luck,
x

Can I daisy chain a DisplayPort-only monitor through the 2nd TB connector on a WD 8TB My Book Thunderbolt Duo to a mid-2011 Mac Mini?

I'm very tempted by a refurb HP Smartbuy ZR2740w 27" WQHD display, but it doesn't have a HDMI port. It does have DisplayPort.
Since the mid-2011 Mac Mini I have has either HDMI or Thunderbolt to choose from, plus I've just bought an external TB storage system, I think I'd need to connect the monitor to the second TB port on the external TB storage and hope that the external storage would pass the DisplayPort signals along.
I've read that DisplayPort connections are compatible with TB ports on Macs, and that you can daisy chain TB devices.
I don't want to assume those statements hold when I'd need to connect the DisplayPort cable to the 2nd TB port on the external storage.
Anyone know if this will work?
Is it "supported"?
Thanks!
Andrew

23. How do I connect my Mini DisplayPort monitor or monitor using a Mini DisplayPort adapter to my Thunderbolt-equipped Mac when I have other Thunderbolt devices connected?
When connecting a Mini DisplayPort display or a display using a Mini DisplayPort adapter to a Thunderbolt peripheral (except as described in question 24), make sure the display is connected at the end of the Thunderbolt chain. You can use only one Mini DisplayPort device in the Thunderbolt chain.
Note: Systems with more than one Thunderbolt port, like an iMac, can have more than one Mini DisplayPort monitor or monitor connected with a Mini DisplayPort adapter connected as each Thunderbolt port can support one Mini DisplayPort display.
24. Can I connect my Mini DisplayPort monitor or monitor using a Mini DisplayPort adapter to my Apple Thunderbolt Display?
Mini DisplayPort Monitors or Monitors connecting with Mini DisplayPort adapters will not function when connected through a Thunderbolt Display. They must be connected directly to the Thunderbolt port on the computer or to a non-display device as indicated above.
from
http://support.apple.com/kb/HT5219#23

I upgraded RAM to 16gb in my i7 mid 2011 mac mini and it shuts down at night

I have a mid 2011 mac mini i7. Below are the specs on memory, hardware, and solid state. I also have Yosemite installed - everything is current. version 10.10.2
I've had 8gb installed since I bought it. And I just purchased 2 sticks of Crucial RAM 8gbx2.
Everything is fine but when I go to bed and wake in the morning, the system will not wake-up. I have fresh batteries in the keyboard and mouse. The system mini is warm on top - not cold or hot. So it does not seem asleep. I have pressed the button on the mac mini once and thought it was alseep...nothing happens. I just can't get it back up after it seems asleep at night.
The only way I can get the system going again is pulling the power plug. This has happened each night since installing the RAM. Oh, I also have held the power button down for 5 seconds trying to do a hard reset. Nothing
I was really excited to get the system up and running with 16gb but hate trouble. I am not a tech expert....
I have not changed any settings. And if it was asleep, why isn't it waking?
Does anyone have any ideas here?
Hardware Overview:
Model Name: Mac mini
Model Identifier: Macmini5,2
Processor Name: Intel Core i7
Processor Speed: 2.7 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 16 GB
Boot ROM Version: MM51.0077.B10
SMC Version (system): 1.75f0
Serial Number (system): C0*******JD3
Hardware UUID: *******
Memory Slots:
ECC: Disabled
Upgradeable Memory: Yes
BANK 0/DIMM0:
Size: 8 GB
Type: DDR3
Speed: 1600 MHz
Status: OK
Manufacturer: 0x859B
Part Number: 0x43543130323436344246313630422E433136
Serial Number: 0x*****EF6
BANK 1/DIMM0:
Size: 8 GB
Type: DDR3
Speed: 1600 MHz
Status: OK
Manufacturer: 0x859B
Part Number: 0x43543130323436344246313630422E433136
Serial Number: 0x*****F0B
ntel 6 Series Chipset:
Vendor: Intel
Product: 6 Series Chipset
Link Speed: 6 Gigabit
Negotiated Link Speed: 3 Gigabit
Physical Interconnect: SATA
Description: AHCI Version 1.30 Supported
APPLE SSD TS256C:
Capacity: 251 GB (251,000,193,024 bytes)
Model: APPLE SSD TS256C
Revision: CJAA0202
Serial Number:         41CA40VIK6LK
Native Command Queuing: No
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Solid State
TRIM Support: Yes
Bay Name: Lower
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
EFI:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Volume UUID: BDC1974F-6B8C-3DAE-9DB2-3AA3C17BF506
Macintosh HD:
Capacity: 250.14 GB (250,140,434,432 bytes)
Available: 86.32 GB (86,323,249,152 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Content: Apple_HFS
Volume UUID: A165C2B8-7E7F-3F83-835B-53C6D2695F1B
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk0s3
Content: Apple_Boot
Volume UUID: 80D578DD-6F7D-318B-8FCD-B6E653BB72F5
<Edited By Host>

Thank you for your help.
I did both resets you offer in the link above and then I went to bed last night.
In the morning, when I hit the keyboard, it paused and came to light....and said there was a problem and it automatically reset and re-booted from a blank screen (not main screen). This was the screen after the reboot. The full error info is listed below the image.
Anonymous UUID:       A8BF7A0B-8CBE-1965-232C-ECB1E6FB72EF
Mon Feb 16 09:40:46 2015
*** Panic Report ***
panic(cpu 2 caller 0xffffff8025c1a46e): Kernel trap at 0xffffff8026138ebb, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000890, CR3: 0x0000000008f59010, CR4: 0x00000000000626e0
RAX: 0x0000000000000004, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0xffffff80441dc000
RSP: 0xffffff82105a3df0, RBP: 0xffffff82105a3e20, RSI: 0xffffff804581aa50, RDI: 0xffffff82105a3f30
R8: 0x0000000000000032, R9: 0x0000000000000001, R10: 0x0000000000000000, R11: 0x000003571b6dfe80
R12: 0x0000000000000001, R13: 0x0000000000000000, R14: 0x0000000000000001, R15: 0xffffff804581aa50
RFL: 0x0000000000010286, RIP: 0xffffff8026138ebb, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000000000000890, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff82105a3aa0 : 0xffffff8025b2fe41
0xffffff82105a3b20 : 0xffffff8025c1a46e
0xffffff82105a3ce0 : 0xffffff8025c36683
0xffffff82105a3d00 : 0xffffff8026138ebb
0xffffff82105a3e20 : 0xffffff8025d6595f
0xffffff82105a3e60 : 0xffffff8025fedcb9
0xffffff82105a3f70 : 0xffffff8025fdba9e
0xffffff82105a3fb0 : 0xffffff8025c14dd7
BSD process name corresponding to current thread: syslogd
Mac OS version:
14C109
Kernel version:
Darwin Kernel Version 14.1.0: Mon Dec 22 23:10:38 PST 2014; root:xnu-2782.10.72~2/RELEASE_X86_64
Kernel UUID: DCF5C2D5-16AE-37F5-B2BE-ED127048DFF5
Kernel slide:     0x0000000025800000
Kernel text base: 0xffffff8025a00000
__HIB text base: 0xffffff8025900000
System model name: Macmini5,2 (Mac-4BC72D62AD45599E)
System uptime in nanoseconds: 3672658333040
last loaded kext at 246104407160: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7fa8dea000, size 69632)
last unloaded kext at 306370508014: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7fa8dea000, size 61440)
loaded kexts:
com.apple.driver.AppleBluetoothMultitouch 85.3
com.apple.driver.AudioAUUC 1.70
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.15.5
com.apple.driver.ApplePlatformEnabler 2.1.7d1
com.apple.iokit.IOBluetoothSerialManager 4.3.2f6
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 269.25
com.apple.driver.AppleMikeyDriver 269.25
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.7.3
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleMCCSControl 1.2.11
com.apple.kext.AMDFramebuffer 1.3.0
com.apple.AMDRadeonX3000 1.3.0
com.apple.kext.AMD6000Controller 1.3.0
com.apple.driver.AppleIntelHD3000Graphics 10.0.0
com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleIRController 327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.iokit.IOAHCIBlockStorage 2.7.0
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AppleUSBHub 705.4.2
com.apple.iokit.AppleBCM5701Ethernet 10.1.3
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleAHCIPort 3.1.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.driver.AppleMultitouchDriver 262.33.1
com.apple.driver.AppleBluetoothHIDKeyboard 176.2
com.apple.driver.IOBluetoothHIDDriver 4.3.2f6
com.apple.driver.AppleHIDKeyboard 176.2
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 269.25
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleHDAController 269.25
com.apple.iokit.IOHDAFamily 269.25
com.apple.iokit.IOAudioFamily 203.3
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOSurface 97
com.apple.iokit.IOBluetoothFamily 4.3.2f6
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOAcceleratorFamily2 156.6
com.apple.kext.AMDSupport 1.3.0
com.apple.AppleGraphicsDeviceControl 3.8.6
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.IOPlatformPluginFamily 5.8.1d38
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMC 3.1.9
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.3
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 710.55
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 710.4.14
com.apple.iokit.IOAHCIFamily 2.7.5
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 396
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: Macmini5,2, BootROM MM51.0077.B10, 2 processors, Intel Core i7, 2.7 GHz, 16 GB, SMC 1.75f0
Graphics: AMD Radeon HD 6630M, AMD Radeon HD 6630M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E433136
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E433136
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE4), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.2f6 15235, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE SSD TS256C, 251 GB
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: IR Receiver
Thunderbolt Bus: Mac mini, Apple Inc., 22.2

Problems on 2011 Mac Mini....Help Needed Please!

Hi,
I have an entry level 2011 Mac Mini (base model but with 8gb ram installed), I bought it in early August.
It has just started being very unresponsive, crashing, locking up, multi-coloured timer, finder crashing.
I have a magic trackpad/wireless keyboard and the following peripherals connected.
A 2tb Samsung USB HDD Drive
A Sony BD Writer (USB)
An Arcam rDac (Digital to Analogue converter) USB also
I also have 2 x 2 TB WD NAS drives connected via a HP Procurve Gigabit Switch.
I use the Mac for iTunes (via Pure Music) with the Arcam rDac (connected in turn to my hi-fi)
I also have Plex installed and Make MKV and am ripping BD's to the Mac Mini's internal HDD and copying them over the Samsung/NAS. Every now and again I get error -50, error -8076, and error -36
That's it, I use nothing else on the Mac, not even Safari or email.
It is connected to a 60 inch Pioneer plasma via HDMI, I also have an iPad 1 which I use for the Remote app for itunes and also have Remoter VNC installed.
I have the Mac (and PS3 a Sky HD box) connected to an HDMI switch then on to the Plasma, the Mac has started being twitchy with regard to handshake, sometimes it is flawless, other times I get a snowy screen and it can take up to a minute or to connect. The other devices connected always work perfectly, and trying another cable or input into the switch makes no difference.
Everything valuable is backed up, shall I Shift+R and reinstall Lion, or is there something else I need to do?
Sorry for the all of the questions
Thanks
David

Sorry I should have said when moving files around I meant larger files.
USB sticks seem absolutely fine.
anything over say 5GB COULD be a problem.
Sometimes Finder (and the Mac) just locks up (can't move mouse pointer or anything) whilst in the process of moving of file. Sometimes I get an error code (8076, 30 & 50 spring to mid).
I've had this moving both the USB drive (2tb) and the NAS.

Mid 2011 Mac MIni Freezing with OSX 10.8.2

My Mid 2011 Mac Mini running OS X 10.8.2 has been Freezing (The baloon spins often) over random things. Is there a scan I can do to check problems. This is my first experience with a Mac and thought they weren't supposed to freeze. I run a few programs at a time but I do have 8g of ram with 2.3 GHz Intel Core i5.

The next time you have the problem, note the exact times when it starts and ends: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Scroll back in the log to the time you noted above. Post any messages timestamped during that interval – the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Offline Installer for Macbook Air 2011 & Mac Mini 2011

I understand that Macbook Air 2011 and Mac Mini 2011 uses a pre-installed OS X Lion with a different build number (11A2063).
However, it seems that with 10.7.2 , there is only 1 build number: 11C74 , as per http://support.apple.com/kb/HT1633 , does it mean that 10.7.2 is a unified version of the OS X Lion for all mac products?
Therefore, would it be possible to purchase & download the Lion Installer from Mac App Store , extract the InstallESD.dmg and use it as a offline Lion installer for Macbook Air 2011 / Mac mini 2011?
P.S. I am seeking an offline solution because the recovery partition has been damaged, the internet recovery doesn't work (error 3403F & 4403F), and the recovery disk I have created with http://support.apple.com/kb/dl1433 showed an error "could not find installation information for this machine". And the Apple Authorized Service Providers are charging $150 for a simple restoration of the recovery partition.

"does it mean that 10.7.2 is a unified version of the OS X Lion for all mac products?"
Yes.
"Therefore, would it be possible to purchase & download the Lion Installer from Mac App Store , extract the InstallESD.dmg and use it as a offline Lion installer for Macbook Air 2011 / Mac mini 2011?"
I don't believe there is a 10.7.2 stand alone installer. 10.7.2 is an update file.

Skip Recovery HD; make bootable clone of 2011 Mac Mini with 10.7.1 ?

Similar Messages

Maybe you are looking for