Skip skip skipperoo!

when i start some (not all) albums on my ipod,it skips each song in turn and then goes back to the menu, i haven't connected it to my pc recently and the songs worked before!
any ideas on whats caused the strange disappearence of my beloved barry manilow collection (just kidding) seeing as the total number of songs hasn't changed???

Jonathan,
A couple of things. First, does the song play same or perfectly in iTunes? Sometimes the importing process is just screwing because of resource issues or something buggy on your computer. I know this is rare, but of my over 3000 songs, I had one song do this. When I delete it and reimported it, it was fine. On one song the quality was bad on the CD. I confirmed this after playing the music on my CD player (3 of them in fact). This may not be issue and the reset that was mentioned my work. I hope so.
Secondly, did you accidently clear the album from iTunes and then have sync to your iPod set to automatically? If so, then your iPod will delete it when synced. I used to do this (still at times) a lot when clearing the checks off of songs. I accidentally chose clear and not Uncheck Selection.
I hope this helps and best of luck with your iPod!

Similar Messages

Depot Excise Invoice number skipped ???

Hi Everyone
For Ex. say our depot excise invoice number range is from 1to 100, assuming the current number is 51. Some day back there was a jump in the depot excise invoice number range. In between 1 and 51 the number "25" is missing.
So the excise department has asked the company as to why we have skipped the number 25.
I have checked the table J_1IRG23D, but the skipped excise invoice number is not appearing in the tables, I mean it says "No table entries found for the specified key"
Our Company wants to know the exact reason as to why the system has skipped the depot excise invoice number "25".
Whether it is the system mistake or user mistake or some body else fiddling with the system.
Please offer you valuable suggestions to solve this problem
Thanks & regards
satish

Hi,
SAP 99.9 % will never skip the number range on its own.
As per my understanding:
1.Some one has manually deleted the Depot Excise Invoice number after creation (due to the user mistake at selecting the
appropriate Incoming Excise invoice, Price , material or etc reason. And while creating the New Depot excise Invoice Number
he forget to adjust the number range at object 'J_1IDEPINV' for corresponding Series Group. This u can confirm by checking
the entry at Item level, instead of Header at it will not show that entry.
2.May be due to the Depot Sales Returns for respective Depot Invoice canceled and Deleted by the user.
Here, deleting the excise Invoice is not Valid practice as per Excise Tax rules of GOI.
3. Kindly check, whether Number Range Changes happend for respective Series Group between the Fiscal Year 2010-11.
Please feel free to correct me and It will be a value addition if you find any other solution.
Thank You,
RB

Call tranasaction with skip first screen in ecc6

Hi,
We are doing upgrade from 4.7 to ecc 6. We are getting an error while running a report( The addition "AND SKIP FIRST SCREEN" can't be used with "CALL TRANSACTION .. USING". ) in ecc6. This is not showing error in 4.7. Call transaction with skip first screen is fine in 4.7. But it is throwing an error in ecc6.
Could anybody provide me the pointers to rectify this error.
Regards,
Ramesh

Hi
Did you pass all the mandatory field values to the calling transaction , Because when you use this addition you need to pass all the mandatory field values then only it works fine. Check out whether you are passing all the mandatory field values.
Regards
Pavan

Songs skipping like scratched cd in iTunes 10.6 why and what is the fix

Hi, I use my MacBook pro to play backing tracks for my live show. I am working in Greece in the outdoors at night. Since the beginning of the summer iTunes has been skipping like mad during gigs Not Good. I don't remember when I upgraded my iTunes but don't recall having the problem last year when I started using the MacBook. I have searched the net and have found many a kindred soul suffering skipping songs.
What gives?
What I have tried:
1- I have disabled the sudden movenmt sensor thinking it might be a Bass Response issue. However, still does it.
2- bought a DJ rack to elevate the computer thinking it might be a heat issue. Nope.
3- got rid of all start up items, closed airport, netshred, etc.
4- changed the setting on Perian from Dolby stereo to stereo, and then I uninstalled it. Nope
5- I use the apogee duet live and I get skips. Tried it without the duet and it's worse.
What I am running-
MacBook Pro
Lion X 10.7.4
Processor- 2.66 Ghz Intel Core i7
Memory- 8GB 1067 MHz DDR3
1TB SATA HD
I hope someone can help. I spent a lot of money for my MacBook and don't want to go back to the PC.
Thanks
[email protected]

Hi, Clinton,
Now I think that I have officially tried everything short of taking out the HD and replacing it..
I have used the removable drive and still got the problem.. However, I noticed that the skipping only happens on my Backing Tracks and the same ones, which then told me that the tracks became corrupted. So I re-encoded 2 of the tracks using Garageband and Others I just replaced with new versions..
It worked great for 2 gigs and I was chuffed to bits.. However, I needed the third gig to make it a go and then BLAMMO one of the re-encoded songs skips... My 4th gig I get a new addition to the skipping...
Something is wrong and it is doing my head in.. Do you have any other suggestions aside from going back to my Cheapie Windows Notebook that never skipped?

Installed a new printer and one line on the top is skipped

Appreciate your inputs.
We have been using the 'Check Printing report' for quite a while; We recently installed a new printer and we see that the alignment has gone wrong.
The checks are printing from one line below as it is skipping one line. Where do we adjust the setting so that the printing starts from the place where we want?
Thanks in advance

Hi
Im no expert but I doubt its a template issue more likely to be the control escape sequence on the printer diriver set up. Check your printer manual and the current set up you have.
Regards
Tim

Can I Select from table skipping extents linked with lost datafiles?

Hi~,
I need your help to recover my database.
I'm using oracle 9.2.0.8 at Fedora 3 with no-archive mode.
and I don't have any backup.
Last night, I experenced hard disk failure.
I tried OS-level recovery, but I lost some datafiles of tablespace.
anyway, I wanted to recover my database without data of lost datafiles.
so, I issued "alter database datafile offline drop" and
start oracle instance.
But, datafiles were not removed from dba_data_files view and
extents linked with lost datafiles were not removed from dba_extents view!
Selecting query of some table containing extents linked with lost data files,
I got "ORA-00376: file xxx cannot be read at this time" message.
So, my question is that..
HOW CAN I SELECT FROM THAT TABLE WITHOUT SCANNING EXTENTS LINKED WITH LOST DATA FILES?
Thanks.

Hi,
Without being in archivelog and without backup, one can't do any sort of recovery. That's why backups and archivelog are so so important.
The offline data file command never does actually drop the datafile. It merely indicates to the control file that now the said tablespace will also be dropped. This won't update any view that the files are not supposed to be used or shown to you anymore.
This is what documentation says about the recovery of the database in the NoARch mode,
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/osrecov.htm#i1007937
You do need a backup in order to get those tables being read. Oracle doesn't have any feature which can offline/skip the missing extents for you and let you read the data without them.
HTH
Aman....

GRC 10 - XML de "Skipped NF-e" não disponivel para download.

Boa tarde a todos,
Instalamos o GRC 10 e fizemos um teste de SKIP de uma NF-e que foi rejeitada pelo próprio validador do GRC. O Skip foi aprovado e o status voltou para o R/3 corretamente, porém, ao tentar fazer o download do xml de skipped NF-e ele não está disponível no portal para download.
Quando fazemos o Skip de uma nota que foi rejeitada pela SEFAZ, neste caso, tanto o xml que foi rejeitado como o de Skipped NF-e ficam disponíveis para download.
Na versão 1.0 do GRC o xml de Skip está disponível nas duas situações para download, ou seja, algo está faltando no GRC 10 que está impossibilitando fazer o download no primeiro cenário apresentado.
Alguém já passou por este problema?
Desde já agradeço,
Juliano Costa

Ainda não abri o chamado porque antes disso gostaria de saber de vocês se realmente isso não é algo que fosse um problema de configuração, etc.
Irei abrir o chamado conforme orientação.
Obrigado a todos,
Juliano Costa

Skip NFE com erro de validação

Oi tudo,
Tenho uma pergunta sobre a funcionalidade de saltar uma NF-e com erro de validação.
Eu apliquei notas SAP
1298283 - NF-e: Passar para a NF-e com erro de validação
1376324 - NF-e: Passar para a NF-e com erro de validação
1376901 - Passar para o erro de validação
Mas ainda assim o processo não funciona completamente.
Em nota 1298283 do texto;
Os novos valores definidos no J_1BNFE_MESSAGE_TYPE domínio deve ser usado
do sistema de mensagens ao chamar as funções interface de entrada
u2022 J_1B_NFE_XML_IN ou
u2022 J_1B_NFE_XML_IN_TAB
de ERP para corrigir o ajuste siga em stati do processo de
NF-es com erros de validação, dependendo da resposta da SEFAZ.
NF-e autorizada para o cancelamento são cancelados e da etapa do processo é
definido como C (completo).
Eu tenho definido os novos tipos de mensagens de acordo com as instruções de nota, mas como estes podem ser implementados e ser utilizado em GRC - sistema de NFe?
O tipo de mensagem autorizado para pular com o erro de validação em GRC agora é '5 ', mas deve ter o valor "8" de acordo com notas acima.
Incluir / XNFE / DB_CONSTANTS em GRC não contém os novos tipos de mensagens
    8 Autorização para Passar uma NF-e com erro de validação
    9 Rejeição Passar para uma NF-e com erro de validação
Alguém sabe como o resolver isso?
BR
Honey

Olá Fernando,
Obrigado pela sua resposta!
Temos também notas 1296515 e 1252567 instalado.
O teste que eu fiz antes de começar a depurar é que eu deliberadamente criada uma NF-e com um valor em falta, de modo que a resposta do GRC seria erro de validação. O exigido quando eu pressionar "Definir Número de NF-e" processo passo status muda para "8" = erro de validação interna do sistema de mensagens. Enviar novamente!
Agora eu enviar um pedido de pular para esta NF-e e as alterações do estado de acção para "Em processamento".
Em GRC Ignorando o pedido for aprovado, mas o processo nunca é completado em R / 3. No log eu posso ver J1B_NFE007 mensagem de erro;
Nova SCS-status "Rejeitado & Skipping (Cancelar) Autorizado" não é permitida para SCS anterior "Erro de validação e Skipping solicitadas".
Quando a depuração vejo que isso acontece em função J_1B_NFE_CHECK_NEXT_SCSSTATUS módulo na declaração
WHEN c_authorized_for_skip.                                                                  "1152140
      IF is_acttab-scssta NA '3'.                                                                  "1152140
        PERFORM get_domain_text USING c_scssta                                   "1152140
                                      i_newscsstat                                                      "1152140
                                      c_scssta                                                             "1152140
                                      is_acttab-scssta                                                 "1152140
                                CHANGING gv_msgtxt1                                            "1152140
                                         gv_msgtxt2.                                                     "1152140
                                                                                "1152140
        MESSAGE e007 WITH gv_msgtxt1        "i_newscsstat                    "1152140
                          gv_msgtxt2        "is_acttab-scssta                                 "1152140
                          RAISING scs_status_not_allowed.                                "1152140
      ENDIF.                                                                                "1152140
Neste ponto, o valor em is_acttab-scssta igual '9 '.
Lamento, mas eu não entendo o significado de "V" na descrição:
(NF-novo e rejeição RESET + + V + + V + SEND Skip Request)
Eu testei:
1. Novo NF-e
2. Definir NF-e número & enviar às autoridades
3. Rejeição devido a erro de validação
4. Enviar pedido de cancelamento de NF-e
Existe algum outro procedimento que eu devo testar?
Se eu tentar redefinir a NF-e após receber a primeira rejeição devido a um erro de validação, R / 3, não me permitem enviar pedido de cancelamento.
Eu penso que este comportamento é muito estranho, já que temos seguido as recomendações na execução notas SAP.
Você recomendaria o próximo passo é registrar um bilhete em relação a este?
obrigada &
atenciosamente!

Is it possible to skip the screen in BDC using IF statement.

Hi Friends,
I have written a report using BDC for tcode CO11 thru recording using CALL TRANSACTION.
Case 1:
If I go to transaction CO11 (screen number 100) and give the order number which has more than 1 operations to be partially confirmed and press ENTER a pop-up screen (screen number 140) appears where in I need to select the operation number and after selecting the required operation number it automatically takes me to another screen (screen number 150).
Case 2:
If I go to transaction CO11 (screen number 100) and give the order number which has only 1 operation to be partially confirmed and press ENTER it directly takes me to screen 150 skiping screen 140.
When I enter the order number which has more than 1 operations to be partially confirmed on my selection screen, my code is working fine as needed.
But, when I enter the order number which has 1 operation to be partially confirmed on my selection screen, it is giving me error in my BDCMSGCOLL saying that the screen 140 doesn't exist.
Is there any way, Can I skip screen 140 using IF statement?
My thoughts:
1. calling screen 100.
      After calling screen 100, I have put the pop-up operation numbers in an ITAB.
      DESCRIBE table lines ITAB <variable>.
      At NEW <order-field>.
      IF <variable> = 1.
2. calling screen 140. "I need some help here to skip the screen 140
                                    " Will this logic work?
      ENDIF.
      ENDAT.
3. calling screen 150.
Rest everything is working fine.
Will my above logic works correctly? I would appreciate if someone could help me with this.
Thanks in Advance.

Hi,
Try something like this:
1. Call Screen 100.
Check if screen 140 needs to be called depending on your custom logic. Lets say you populate a variable as 'X' if it needs to be called.
Then write:
if valiable = 'X'.
Call screen 140.
Enter Screen 140 details.
endif.
Call screen 150.
Here the 'Call Screen' is nothing but the code you extracted after BDC recording.
Thanks.
Ravi'

Native Music Application Stuck on Skip

I looked for a better location to start this discussion, but I can't seem to find a place already started to discuss the native music app that comes with the iPhone.
While there are applications listed such as iTunes U, iBooks, iPhoto, etc under iOS apps, the music app is not there.
Moving on to my predicament:
When the new ios7 came out, one feature I was excited to start playing with was the new iTunes Radio. At first it worked, I added a chanel, listened to it, thumbed up a couple songs, etc.
The next day I go to continue listening to my added channel. It will not play. Instead, it scrolls through (right to left) song name after song name, not stoping no matter what I press. I tried restarting app and phone alike. This was the first day...I gave up and tried a day later. Now it scrolls through and stops after 6 songs (as though I myself were skipping the songs and it had reached its limit.
It does this every time I add a station, and if I play a station without adding it, it plays the first song and then skips by 6 song titles incredibly fast.
I wanted to bring this up here in case it was happening to anyone else.
Thanks for reading, and thanks in advance for any recomendations and/or feedback.

Thank you Rod for the clarification.
As an added note. I finally got a response from Oracle Support regarding my question and posted below:
"Yes. You can skip to section 7 not step 7
Correct one is section 7. as in Note - 417558.1 (but internal note,not published)
It should be
If you have only migrated your existing 4i End User Layers to Discoverer 10.1.2
without patching new eex files, you can skip the remaining steps in this
section and proceed with Section 7 ( as in Note - 417558.1 )
There was a remark on the Note 313418.1 to change this.

How to Skip SSO Username and passowrd.

i just installed Oracle Application Server .2.0.2 on Windows 2003.
Before i can view report i have to give SSO Username and password i want to skip this step and report can be executed directly from my Forms.
i have already commented the SSO lines from my formsweb.cfg file. as shown below
#ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
#ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
#ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
#ssoMode=false
Thanx in advance

I assume you are not using Oracle's Portal or otherwise already using OID as an SSO server.
There are two big steps you'll need to do this
Enable and configure SSO for Forms
http://www.oracle.com/technology/sample_code/products/forms/viewlets/10g/frmsso/frmsso_viewlet_swf.html
Enable WNA for OAS : Read Metalink doc 345025.1. It is not a simple process.
WNA will log into the SSO server via Kerberos. When the Forms connection fires off, it is from the Forms server, so Kerberos is not an option. Instead the Forms server will use a Resource Access Descriptor (RAD) to retrieve username/password/sid logon information from the OID server stored in the OID SSO account that your authenticated into via WNA
If you are already using Portal & have users sign, then WNA is not needed & just go with the SSO for Forms.

IOS8.1 Music App won't play "Skip When Shuffling" songs at all

iTunes has two options for skipping a song during shuffle: the first column with the tick box (let's call this the "Play Column"), and the "Skip When Shuffling" tick box in the Options tab of the song info.
For songs in iTunes where the Play Column is unticked but Skip When Shuffling box is also unticked, this works as it should when synced to the iPhone: ie the song doesn't come up in shuffle, but it can still be selected & played directly on Music app.
But when the Skip When Shuffling box is ticked (regardless of whether the Play Column is ticked or not), the song can't even be selected & played directly on the Music app. When selected, it just picks another random song from my playlist to start shuffling from.
It's like the Skip When Shuffling option overrides the Play Column (no idea why iTunes should have two different options to do the same thing anyway), but has also now stopped the App from playing the song at all. I've tested this by unticking the Skip When Shuffling box in iTunes & re-syncing to the iPhone, and the Music app now plays the songs when selected directly.
My iPhone 4S using iOS8 always played these songs with no problem, so this is a new issue/bug/feature with either iO8.1 or the app in the iPhone 6 itself.

What kind of Music App are you using?
Maybe some Apps they have bugs when using iOS7.
I'm using MVDIO and zingmp3, it's still okay here.

IPhone 4S skipping songs/won't play some

I recently updated my iPhone 4S, in doing so, I had to reset it and restore it from my back up. Now that I've done that, when I'm playing music from my iTunes, it wil skip the most recently added songs and won't play them at all if you try and click on them manually to play them. It shows them as on my phone in my iTunes on the computer, but won't play them. HELP! Alot are for my wedding and I can't figure out how to fix this!!

Hi, In my case I had a memory space problem. Some songs were on the phone and some not.
- Gain space on your phone (copy alle the photos to hard drive before, then delete them)
- Sync your phone again with iTunes, he will copy the songs on your phone

Horrible video skip / lag problem - once per second in all apps!

I built a new system last month (my first AMD) and I am having a really aggravating problem. In all games and all video playback I get an annoying skip once per second, every second. It affects sound during gameplay but not during movie or mp3 playback. It even happens with the visualization mode in Windows Media Player.
My system is as follows: MSI K8N Neo4-F, A64 3200+ venice core, MSI 6800GT 256MB PCI-E, two sticks of Corsair valueselect DDR400 512MB each, 500 watt PS, 160GB 7200 SATA HDD. Most recent NVIDIA drivers for everything. WinXP Pro with SP2 and all updates, DX9C. Nothing overclocked, all settings standard.
I have tried the following solutions:
1) BIOS upgrades, started with 1.4, installed 1.5, MSI tech support gave me 1.6b2 and I installed that. No luck with any of them.
2) Memory, installed per MSI directions, but I've tried all legal combinations, including one stick at a time. No change.
3) full format and reinstall of WinXP. No luck.
4) Switching between WinXP IDE drivers and NVidia drivers, with and without RAID drivers, No luck.
5) Removal of 6800GT PCI-E card and replacing with Ancient 8MB PCI Permedia2 video card. Problem still persists.
6) Disable onboard sound and LAN. No luck.
7) Running Fedora core 4 on second partition. Installed Nvidia video drivers, tried some games. THIS WORKS! No hitch, no skip, no nothing. Framerates are noticably slower but very stable. In WinXP I saw framerates bounce all over the place, from 230 FPS down to about 70 with one game. That same game on Linux ran smoothly at about 166 FPS with only occasional slight drops. The big FPS drops in Windows usually came right after one of the skips but didn't occure after every skip.
Right now I'm stumped. Linux uses totally different drivers for sound, LAN and SATA support. Some of those drivers don't fully use the Nforce4 chipset's features, maybe that's part of the difference.

Thanks TireSmoke:
I had found that sticky, but I took your advice and went thorugh it in detail last night. Lots of great info, fixes tweaks and tools, sadly none of them fixed my problem. The lag problem most people are reporting is not really like the wierd problem I am having. I have tried the recoommended fixes with ablsolutely no change in my system's behavior.
I am beginning to suspect a faulty motherboard component.
Russ_XP:
I think you are correct about fast writes. I googled the heck out of that last night and couldn't find any reference to enabling or disabling fast writes on PCI-E.
The drive is SATA-1. The Neo4-F is not SATA-2 enabled (there is a hack for it though). From memory I think it's a Western Digital WD1600-something, 7200 RPM dirve. I've tried it on both SATA buses and tried disabling the unused bus in BIOS.
I'm pretty sure I can dig up an old PATA drive somewhere and give that a try.
Gpalmer:
True enough, and I don't have these problems under Fedora. Sadly this is a cross-platform game development box, I need both XP and Fedora working.
Black_God:
Nope, this is a clean install. Although I wonder, could any of the built in XP update and security tools be causing this? I have disabled Windows firewall and virus protection monitoring.

Playing music on itunes 6.0.1 many songs have a long Skip in them... makes

When I play songs on my computer in itunes many songs have a long skip about 1/3 of the way into the songs. Sometimes the skip is just that, a little skip, but sometimes it seems to replay a tiny section of the song over and over very fast, like a reverb, and get louder as it does so. Kind of ruins the moment and the song. Thanks for any help or anyone else have the same problem ???
G5 dual 2 gig, PB 1.67gig 120 HD 17", PB 1gig 60 gig HD 15" Mac OS X (10.4.3)

Tygerlylly,
Read my post here:
http://discussions.apple.com/thread.jspa?messageID=1307909&#1307909
iTunes has corrupted your song files- you should open one or two and you'll see gaps have been added, some segments are recreated between gaps, etc. They're an absolute mess! Can't wait for someone to explain that.
core4

Skip skip skipperoo!

Similar Messages

Maybe you are looking for