Skip to 2nd or 3rd parameter based on 1st parameter

Hi,
I have completed a report in Reports 6i and registered in Oracle Apps 11i.
In this report, I have 3 parameters, P1, P2 and P3. P1 is a fix value: A and/or B.
In Oracle Apps, how can I "grayed out" P3 (as no user input allow) and auto jump to P2 when user select P1 = "A". Similarly, when P1 = "B", it should auto jump to P3 with "grayed out" at P2.
Thanks and welcome for any suggestion.

Yes, it might not be the Report 6i designer tool I should be looking at.
My question is: When executing a report in Oracle Apps 11i, I need to have the cursor move to Parameter P3 automatically (grayed out P2 field) when I fill in "A" at Parameter P1.

Similar Messages

I have a 2nd or 3rd generation iPod touch. Recently, it doesn't recognize headphones and will only play music through it's speakers. I've tried cleaning the area where you plug in the headphones but this has not helped. What should I do?

My ipod touch (2nd or 3rd generation) won't recognize headphones anymore! I have'nt gotten it wet or dropped it. I've tried cleaning out the plug where you plug the headphones in. I've had no luck. Is this fixable or is it time to trash this iPod?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit
It i likely not worth getting it fixed if a bad headphone jack

Dunning 2nd and 3rd letter

Hi SAP Guru
How i can get Dunning 2nd and 3rd letters
I have getten dunning 1st letter but i am not able to get sencond and 3rd
what is the process , Thank you in advance

Hi,
Line items should reach minimum number of days, referring to the due date of net payment, to reach a certain dunning level.
In FBMP check you dunning interval. If line item has reached interval maintained for 2rd and 3rd level then items will not be dunned.
Also check dunning levels for your dunning procedure in FBMP.
If you find no problem with dunning settings then, activate additional log for the dunning run to identify exact reason for the problem.
Thanks!
Raju

HT4352 Do u have to have a computer/pc to use home sharing? I have apple tv not sure if it's 2nd or 3rd generation or even if it's first generation. My laptop is broken and in the shop, can I not run my apple tv off my iPad?

Do u have to have a computer/pc to use home sharing? I have apple tv not sure if it's 2nd or 3rd generation or even if it's first generation. My laptop is broken and in the shop, can I run my apple tv off my iPad?

If you have home sharing turned on in the settings of your apple tv and your iPad you can AirPlay from your iPad to the apple tv. When you play a video there is a tv icon on the right side of the play/pause/fwd/rwd icons. Click that and choose your apple tv. Your apple tv and iPad must be on the same network.

Apple TV (2nd and 3rd Generation) - Home Sharing Not Working but Airplay Does

Hi everyone,
This has been a bit of a ongoing problem, so I'll provide a bit of background.
I am running a Mac Mini (Late 2012) Running Yosemite 10.10.1 as a media server running 10TB of Movies, TV Shows and Music off a NAS Drive. Running iTunes 12.0.1.26. Main hard drive is a 256GB SSD.
I also have 5 Apple TV's in the house, 2 are 3rd Generation (running iOS 7.0.2), 3 are 2nd Generation (running iOS 6.2.1).
The goal is to watch the TV Shows and Music through Home Sharing.
Home sharing works perfectly through the 3rd Generation Apple TV's, as does Airplay. I never have a problem with these. Mac Mini (or any other device for that manner) has no issues accessing the NAS.
The 2nd Generation Apple TV's are a continual source of frustration. They are connected to the network, can access the iTunes store, can accept Airplay signals from the Mac Mini, iPads, iPhones, etc. Can even detect the other (2nd and 3rd Gen Apple TV's). But frequently, when I try and connect to Home Sharing, I receive the error message "Cannot connect to Home Sharing", even though if I jump on the Mac Mini, I can airplay the content to that Apple TV just fine.
Is this just a 2nd Generation Apple TV Issue (to make us go an upgrade all our Apple TV's to 3rd Generation)?
I have completed the following troubleshooting steps, to no success.
1) Reset the Apple TV's (Multiple Times)
2) Sign out of Home Sharing\iCloud\iTunes Account, reset, and sign back in.
3) Restore the Apple TV to the latest firmware and set up again.
4) Test the device on Wireless and Wired Network.
5) Reset all network infrastructure.
6) Power Cycle the Apple TV's for 15 minutes.
7) Reset iTunes.
8) Sign out of Home Sharing\iCloud\iTunes Account in iTunes, Reset the Mac Mini, and Sign back in.
9) Reinstall iTunes.
10) Reset the Mac Mini and NAS.
11) Reformat the Mac Mini and update to latest operating system (Mac OS X Yosemite 10.10.1).
12) Try home sharing from a Windows PC (Windows 8.1, x64).
Literally out of ideas. Am I chasing a Unicorn on this one? Would love some help.
Thanks!

Good to know your Apple IDs are fine.
So I've been experimenting with de-authorizing and re-authorizing computers and devices and the symptoms you are experiencing are reminiscent of devices and computers unable to authenticate with Apple's servers.
What I would do is try de-authorizing and re-authorizing computers and devices to see if things return to normal. Start with the computers first. You can quickly de-authorize the computers by logging in to your iTunes Store account and using the 'Deauthorize All' button. After clicking the button wait a few minutes for it to propagate. You will know that the computers have been de-authorize when the Account Information page says "0 computers are authorized to play content purchased with this Apple ID." Other devices like Apple TV and iPads and such do not count on that list.
Once de-authorized, re-authorize them from the 'Store' menu in the iTunes app. You will know all three computers have been re-authorized when the Account Information page says "3 computers are authorized to play content purchased with this Apple ID." Now try and play your content with Apple TV. If it still doesn't work turn Home Sharing off on the Apple TV and then re-enable it using your Apple ID.
Hopefully this brings back your Home Sharing functionality.

How can I determine if my Ipod Touch 8gb is a 2nd or 3rd generation?

I purchased a MacBook Pro in September when they were having the special where you could get an Ipod Touch 8 gb for free.
Well, I have decided to keep my old Ipod Touch just b/c it is working fine and I would like to sell my new one. The new one is in the original packaging and I don't want to remove it so I can sell it as new, never been out of the box.
My question is how can I tell if this is a 2nd or 3rd generation Ipod Touch? I looked on my invoice and couldn't figure it out. I noticed on CL and EBay, everyone indicates 2nd or 3rd and I want to have the correct info.
I am "guessing" it is 2nd generation and that is why it was part of the promotion.
Any help is appreciated. Thanks so much.

That isa correct, the 8 GB is still 2nd Gen. The only ones that are any different are the 32 or 64 GB versions. This is a 2nd Gen iPod.

Please help.... do I have a 2nd or 3rd gen iPod touch?

I bought an iPod Touch for my father in February from an Amazon seller (happybook1). I ordered a 3rd generation iPod Touch on purpose because I don't have Snow Leopard OS and I wanted to be able to plug it into my OS 10.4 computer.
Yesterday my father decided to bite the bullet and asked me to upgrade his iPod Touch from iOS 3.1 to iOS 4.1. However, when I tried it kept freezing (not the issue here). I wen't to apple.com and put the serial number into their warranty section and it said the iPod is a 2nd generation iPod!!!!!!!!!
Here is the serial number 9C035RM475J
Angrilly, I wrote the Amazon seller and insisted she give me a refund.... I couldn't believe she had sold me a 2nd generation iPod!! But she immediately responded with this:
Thank for your e-mail, the ipod I sent you is considered the 3rd gen, its part number MC086ll/A is the part number matches amazons listing category for the 3rd gen. You can find this part number on the bottom of the box as well as under settings.
The part number for the 2nd gen. touch is MB528LL/A. The model MC086ll/a does show in apples website as a 2nd gen because the only difference between the two is that the 3rd gen. model MC086ll/a came preloaded with the iphone 3.1 software and the second gen. didn't. So apple changed the part numbers and the software from the 2nd to the 3rd but it will show as a second in their website, there is no touch that shows as a 3rd gen in apples website.
Apple can verify this with you if you call them but I just wanted to explain why it shows that way in there site, but I did list it in Amazons 3rd gen. category because it is listed by the part number and they categorize it as a 3rd.
So I just wanted to let you know I didn't list it wrong you can check it by the part numbers in Amazon. Apple is up to 4.2 software version now so it will prompt you to update the software anyway when you connect it so you should have the lastet software. Is the ipod working ok now that you updated.
Now I'm confused.... do I have a 3rd gen or is this seller just lying her pants off??
I was able to restore the software into 4.1 but it is sluggish..... I'm thinking because it is really a 2nd gen with a slower processor?
Can someone please help me to figure out the truth?? Should I insist she refund me (though she probably won't) or accept this answer as the truth? Does it make a difference... the difference between 2nd adn 3rd gen?
Please help... thanks!!

Look at the back of the iPod. What model number is actually shown on the unit? And what is the capacity of the unit? If it's an 8GB iPod touch it's a second-generation, regardless of what your seller is claming. Apple never made a 3rd-generation 8GB iPod touch. Some resellers incorrectly refer to the 8GB with iOS 3 as "3rd generation", but that was never a designation approved by Apple."3rd-generation" properly only applies to the 32GB and 64GB iPods Apple released in September 2009, models which have faster hardware.
Regards.

What's the difference between 2nd and 3rd generation

PLEASE HELP! New Apple user and looking to purchase a used 2nd or 3rd generation ipod touch.
what's the difference between 2nd and 3rd generation?
apparently I am told that the 2nd gen does not have the capabilities of listening without headphone? and the 3rd gen does??

Hi maximumslowness - (great name),
The 2nd gen Touch has one internal speaker, so you can listen to it, (both left and right channels) without headphones.
However - it's a small single speaker and it is not very loud. It's not designed for quality listening (neither is the speaker on the 3rd gen as far as I know) and probably will not be adequate if there is a lot of background noise nearby.
One option is to drop the iPod (not literally!) into an iPod Docking station so that the sound can play out through a self-contained mains-powered amplified speaker, which will also charge your iPod. There are many on the market. On the bottom of the iPod is the 30-pin dock connector which can be used to feed the audio to a docking station. Another option is simply to use a cable to connect from the headphone socket to the audio input on any amplifier.
Yet another is to plug in a small fold-up style speakers, such as
http://www.amazon.co.uk/Portable-Folding-Speakers-iPods-Players/dp/B000A1QKNU/re f=sr_1_84?ie=UTF8&qid=1332326622&sr=8-84
or http://www.amazon.co.uk/Generation-Capsule-iPhone-Laptop-Speaker/dp/B002XNO7FQ/r ef=sr_1_6?ie=UTF8&qid=1332326656&sr=8-6
I've no idea how good the sound is, you'll have to judge that for yourself. The links are both to a UK store, but most countries will have a similar option.
I do not recieve any form of payment or compensatiion for the above links.
Message was edited by: the fiend

Video card to run 2nd and 3rd monitors cs5.5

Hello all,
I have a powerful system with multiple hard drives that I use to cut HD DSLR footage on in CS5.5. My GTX 570 runs my 1st monitor and my 9600GT runs the 2nd and 3rd monitors with great success.
1st monitor = timeline
2nd = bins
3rd = full screen preview (Highest quality preview)
The reason I use the gtx 570 to run only the first monitor is because it idles much higher and hotter connected to two monitors. (Disables the down clocking feature on the card when connected to multiple displays).
Well the 9600gt has died.
I don't want to spend alot of money here but I am not sure what video card I require for my 2nd and 3rd monitors. Keep in mind the 3rd monitor is the full screen preview.
I know premiere pro uses my 570gtx for the MPE but I have no idea how this effects (if it does at all) my 3rd preview monitor since I have had it plugged into my 9600gt.
There for I am not sure if I can get away with a cheap card like a $50.00 Nvidia GT 610 or do I need something at least equal or greater then my old 9600gt?
Thanks!,
Kieran

Thank you for the reply Harm. I have an x79 board with a 3930k @ 4.6ghz.
I will take that advice on board.. I might have to fork out a bit of extra money. Shame I only purchased the 570 gtx a couple of months ago!
Found this card....
Gainward GTX550Ti 1G DDR5 DVI HDMI
Internet Price:    $111.00
Barcode :
426018336-2050
GPU :
GeForce GTX 550 Ti
GPU Clockspeed :
900 Mhz
Memory :
1024MB GDDR5 192bits
Memory Clockspeed :
2050 Mhz
Pixels per clock (peak) :
N/A
Bandwidth :
98.4 GB/s
Ramdac :
400 MHz
PCI-Express 2.0
Cooling :
2-Slot Fan
Video-Features :
HDMI
Connectivity :
DVI-I + VGA
Would this be sufficient??
Thanks!!
Kieran

I have here an iPod touch Model number a1288 but the last number to me also looks like a 3. But that isn't my point. I'm here asking this question,. I broke my screen today and I was wondering if it mattered or not if i put on a ipod touch 2nd or 3rd then

I have here an iPod touch Model number a1288 but the last number to me also looks like a 3. But that isn't my point. I'm here asking this question,. I broke my screen today and I was wondering if it mattered or not if i put on a ipod touch 2nd or 3rd then LCD and Screen. I really don't want to buy a new iPod and i've had this for a long time and its still working fine for me. Ijust need something that will play my music at work. Please someone helpp.

You can check your model here: iPod Touch - Wikipedia, the free encyclopedia
and search this place for parts that would fit.

HT4437 How can I tell if my Apple TV is 2nd or 3rd generation?

Just purchased a new Apple TV from FS but not sure how to confirm whether it's 2nd or 3rd generation. It's model A1427 and Part# MD199C/A.

It's the third gen. Only diff is you have 1080p :)
I just googled the model number.

The beta page and Test Pilot page come up EVERY time I use Firefox. Same information so why not allow us to bypass it after the 1st or 2nd or 3rd reading?

The beta page and Test Pilot page come up EVERY time I use Firefox. Same information so why not allow us to bypass it after the 1st or 2nd or 3rd reading?

That is not normal behaviour, for possible causes see [[Firefox has just updated tab shows each time you start Firefox]].

Adding a 2nd and 3rd Drive

I just added a 2nd and 3rd ata drive to my 450 MHZ tower. The motherboard had an open plug that said ata.
I plugged in the cord (strip) that came with the drive into the board and into the additional hard drives.
(fyi) I took both hard drives and strip from a working unix server.
I plugged in power to each.
I started up the mac. It shows the 1st drive on the desktop, but no others. Disk utility doesn't see the new drives either.
What did I miss?
Any help would be greatly appreciated. Thanks.
PowerMac G4 (AGP graphics) (version =2.9) Mac OS X (10.2.x) 9 GB SCSI
PowerMac G4 (AGP graphics) (version =2.9) Mac OS X (10.2.x) 9 GB SCSI

Hi omoriginals ,
Welcome to the Discussions.
Your computer can only mount two drives unless you add another ATA controller card in an empty PCI slot. There's one bus that has the ability to control two drives.
The additional drive and cable you installed will need to be removed. The other that you attached to the existing data cable needs to have its jumper set to "slave" and then attach it to the center position on the cable. The jumpers are small plastic and metal blocks that connect two pins located next to where the data cable attaches to the drive. There should be a diagram on the drive for the settings. Just set it, reinstall then format it with Disk Utility (in your Utilities folder).
John

Is it possible to replace the internal wifi antenna in a itouch 1st gen with a stronger internal wifi antenna from a slightly newer model, such as a 2nd or 3rd gen itouch?

Is it possible to replace the internal wifi antenna in a itouch 1st gen with a much stronger internal wifi antenna from a slightly newer model, such as a 2nd or 3rd generation itouch?

That is not very likely as the antennae are different physical designs and fit will be an issue.

How much less would I have to pay if I exchanged my iPad 1st gen for a 2nd or 3rd gen iPad?

Well I have had an iPad 1stbgen for a while but you only have a certain limit with ios 5.1.1
I was wondering if I can pay less if I exchanged my iPad for an iPad with more modern iOS such as the 2nd and 3rd gen iPad
Thanks for listening and trying to help

Your only option is to sell the iPad and buy a new one.
Apple Reuse and Recycle Program
http://store.apple.com/us/browse/reuse_and_recycle
How to Sell Your Old iPad http://tinyurl.com/85d69lk
Other sources to sell.
eBay Instant Sell http://instantsale.ebay.com/?search=ipad
Sell and Recycle Used Electronics - Gazelle http://www.gazelle.com/
For instant gratification in selling a used iPhone or iPad, Gazelle’s Gadget Trader, an iOS app, is tough to beat. In seconds it detects the device and reveals how much it is worth in good condition. Tap the Sell This Phone to Gazelle button and the deed is done.
Sell Electronics for Cash - Next Worth http://www.nextworth.com/
Buy My Tronics http://www.buymytronics.com/
Sell Your iPad http://www.sellyourmac.com/mac-product-guides/ipad.html
Totem http://www.hellototem.com/
How To Sell Your Old iPad: 5 Places To Trade In Your Old Device
http://www.huffingtonpost.com/2013/11/05/ipad-trade-in_n_4218964.html
THIS IS VERY IMPORTANT - What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5661
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/ts4515
Buying or Selling a Used iPhone or iPad Running iOS 7? Read This First!
http://www.makeuseof.com/tag/buying-or-selling-a-used-iphone-running-ios-7-read- this-first/
 Cheers, Tom

Skip to 2nd or 3rd parameter based on 1st parameter

Similar Messages

Maybe you are looking for