Skipping after rendering when transitions are added
Hey all,
I'm having an issue with the most recent version of Final Cut.
I am trying to add a smooth cross-dissolve between clips in V1 and V2. When I originally add the transition, and move the playhead manually with the arrow keys, the transition is smooth. However, once I render the transition, my video jumps.
To be specific with what happens, the transition itself is smooth, but once the dissolve finishes, the same video that was seen in the dissolve replays normally.
I have tried adding extra handles, moving them both into the same V1 line, and even tried different transition effects, but the same thing keeps happening.
How can I fix it?
Check to be sure the disk format is what iMovie requires.
Also rule out third-party iMovie plug-ins and QuickTime add-ons that might be causing trouble.
More about both here:
http://discussions.apple.com/message.jspa?messageID=1852869#1852869
Karl
Similar Messages
-
IMovie moving audio clips when transitions are added
iMovie moving audio clips when transitions are addedI have some video clips that need simple fades to black added at the end. However, whenever I add the fade out transition, iMovie does something insane. Instead of the last two seconds of video fading to black and the last two seconds of audio fading out, it seems that a random two seconds of audio from elsewhere in the clip is tacked onto the end and faded. This problem is nuts and I am having no luck finding a solution. Does anyone have one? This has happened with other transitions, but I’d settle for just getting a fade to black to work properly. Is this only a problem with Intel machines?
The problem that you describe has come up frequently on this forum. There are lots of things people have tried, but no solution has been found, other than the workaround of extracting the audio, as Klaus 1 mentions, and manually adjusting the fade out. Some feel that it is an intel machine problem, but that is not clear.
For more information on this issue, try using the search function of this forum, typing in "audio echo with transitions", or some other appropriate search words. You might find of interest the information contained in the following post:
http://discussions.apple.com/message.jspa?messageID=5681815 -
Does anyone know how to correct audio that skips after rendering? The video is fine and the audio matches up to the video but the audio skips as though it is going in and out. The movie is about 2 hours long and the first few clips were fine but now it is becoming a problem. I rendered both the video and audio at the same time then I went back and rendered only.....mixdown to see if I could get it to work......no luck. Any help would be greatly appreciated.
Tammy,
If we've dropped a bit of time for this part of the edit, you now have time for more fun aspects of it.
While I will casually monitor my Meters, I spend much more time with a good set of noise-canceling headphones, listening critically. The Meters are basically to point up potential issues. With Audio, if you have not invested in a really good set of headphones, do yourself a big favor, and sneak 'em into the budget.
Glad that you got things toned down.
Now, let's go on to Lesson 02 - The Audio Mixer. Unlike adding Keyframes to a Clip, when your cutting is done, you can apply Track Keyframes to attenuate (also Pan, etc.) you Audio Tracks to suit. One would just change the Send in that Track to Write, or Touch, and "ride the gain" with the slider, as is required. I probably do most of my Audio editing there, than addressing the individual Clips. First thing that I have done is cut back a bit on the frequency of the Track Keyframes in Edit>Preferences, as I find the default to add too many (and you can go in and adjust these by hand, if you need to "smooth" things out a bit.). One caution: do this when you are satisfied with the cuts, Clip placement, etc., as these Keyframes are applied to the Track. If you were to remove a Clip, and replace it, those Keyframes would apply to that new Clip, whether you want them to, or not. This trips some folk up, if they do the Audio Mixer thing too soon in the editing. Wait until you are "in love" with your Timeline otherwise. It's like scoring a Project. One does that as about the very last step, or much work will be repeated, and that is not fun.
Good luck,
Hunt -
help after rendering when I'm mastering a small video segment is duplicated elsewhere in the timeline, apparently I do some movement
Shane is trying to find out if you're working with material that's not in a fcp friendly format, like h264. It's also possible that your sequence is corrupt. Create a new sequence with the same settings, make the old sequence active, select all (command-a) copy (command-c), make the new sequence active and paste (command-v)
-
User pictures are not shown when users are added to person field in custom list
Hi,
Recently we have migrated our intranet from SP2010 to SP2013. We upgraded User profile service application, My sites and Intranet site to new environment. We haven't upgraded sites to use SP 2013 templates due to some business decisions. Everything
is working fine and as expected.
There are few lists in our environment where we have added users in a persons fields and allowed to show their pictures with details along with name. these user pictures are not being shown on to the page. After looking in picture property I found that "white
Space" in a picture library name is replace by %2520 instead of %20 (/user%2520photos/profile%2520pictures).
I tried reproducing problem on a new team site with SP 2010 template and it is reproduced however it is not occurring for a team site with SP 2013 template.
Any suggestions would be very helpful for resolving this issue. Thanks in advance.
-Amol MesheWe are experiencing the same issue. We get a /User%2520Photos/Profile%2520Pictures/ path anytime we use the people picker field with the option to display picture or the picture and details option.
EDIT: This is only a problem on the list view. If you open the display form the image shows just fine. I can't see any setting view Edit Page and updating the web part that contains the list data to correct this.
Michael Allen (.NET and SharePoint 2010 Developer) -
Dynamically populated dropdown values are missing when instances are added
HI Team
I have a subform which is repeatable have a drop down as one of the field which is dynamically populated from the web service call(short lived process) from the DB.On initialize event of the subform the data connection is executed .Dropown is populated with the values but when an instance of subform is added the dropdown values are missing.
Only in the first instance of a subform dropdown values are showing up , when instances of subform is added the drop down values are missing.
Please let me how can i solve this issue,
Thanks in Advance
BharathiI've tried this option by adding some value (hard-coded) during initialize event of the subform and all values are populated in the newly added instances as well.
Not sure why it's not working for you.. Can you try adding some sample values without calling web service and confirm if it's working? -
Zagged pictures when transitions are used
Why (both in vers 5 & 6) do some pictures get jagged after the transition, or after the starburst title? This is driving me nuts! The pics are either jpeg or tiff.
Thanks,
StuartWhy (both in vers 5 & 6) do some pictures get jagged after the transition, or after the starburst title? This is driving me nuts! The pics are either jpeg or tiff.
Thanks,
Stuart -
Annotation's "D1","D2",... to be added to graph when points are added to graph....
hi ...
Good morning...
Text labels "p1","p2" , & so on ... should be named for points added to the graph for plot 1 only not all plots... .
As in the graph when a particular point is ploted we can right click on graph & add annotation ... to mark tht point ...
but if we dont want user to do it manually.. & as the points will be ploted in graph tht points should be labeled p1,p2,.respectively..... then how to go about it ...
I tried checking in property node .. annotation list is thr ... but all i want is just the point name to b changed for each point not other properties...
I am Using LABview 8.0
Waiting in anticipation ...
Regards
YoganHi yogan,
In order to do this you can read the AnntList property which will output an array of clusters. You can then modify just the Name value in a cluster and write it back to the AnntList property. There is an example that ships with LabVIEW that demonstrates programmatically editing annotations. You can find this in LabVIEW by going to the Help menu, and clicking on Find Examples. Then browse to Fundamentals >> Graphs and Charts >> Programmatically Annotate a Graph.vi. Specifically, pay attention to the "Avg" Value Change event in the Event Structure. This shows how to modify the name of an annotation.
I hope this helps!
Brian A.
National Instruments
Applications Engineer -
When will Apple resolve the FCPX Crashes when Effects are added to a clip in timeline.
I have tried every route to get answers from Apple regarding system crashes when applying an Effect to a clip in the timeline. I am now getting more aware from posts in all sorts of Forum / Communities that this is causing VERY MANY users a problem.
It would only take 30 seconds for Apple to post a statement to let their users know what they intend or are doing to resolve together with an estimated fix time.
Come on Apple please SAY something at least.
F. JacksonHere we go - I have another thread that I started the other day, but thought I'd continue this here. I just did an extensive test. Fred, you may be on to something here. I'm beginning to think some of this is only happening if you are:
(a) running the Trial version
(b) Motion is NOT installed
(c) and it may be that the 10.0.1 update has created this problem, although surely Tom and Andy are running that update...
...or some combination of the above. Anyway...
New iMac i5 quad-core 12mb RAM - new machine with total stock config - only Apple software except for Office 2011.
FCP X Trial version, Motion is not installed
I've tried a variety of clips, but to eliminate variables, for this test I just used clips from a Canon 60D. They were imported from the card and converted to ProRes by FCP X.
Again, these crashes only relate to using the Inspector with certain Effects. If the Inspector is closed, I can apply these Effects and they play back flawlessly. However, once I've applied them and selected the clip, clicking the Inspector button causes an immediate Quit of FCP. And, if the Inspector is already open, just applying the Effect to any clip causes an immediate Quit.
These are the Effects that cause the crash (for me) by category:
Blur - Radial, Zoom
Distortion - Earthquake, Fisheye, Fun House, Glass Block, Mirror, Scrape, Water Pane
Keying - Image Mask
Lighting - Highlights, Side Lights, Spot
Looks - amazingly enough, all work except for Glory
Stylize - Censor, Halftone, Line Screen, Photo Recall, Pixellate, Vignette
Tiling - Kaleidoscope, Kaleidotile, Perspective Tile (but strangely just plain "Tile" DOES work)
So, this is approximately half of the supplied Effects. Interestingly, there is not a single category in which ALL of them work, nor one in which NONE of them work. And, by the way, doing this gave me a chance to check out every Effect - wow are there some cool ones I can't wait to work with. And, I got into this routine of highlight clip, make sure Inspector was open, double-click Effect, if no crash just CMD-z and repeat. I threw a lot of changes at it in quick succession and it handled it beautifully, except for the list above.
There is also a third party free effect from Alex4D called Smooth Move. It looks fantastic! It allows Ken Burns-like scaling which somewhat alleviates the weird animation that results if you scale and move at the same time with keyframes, BUT it allows the flexibility to NOT have the move span the entire clip like Ken Burns does. Oops, sorry, that Effect ALSO crashes the Inspector, so I can't access the controls. And, to keep this test pristine, I didn't try the Alex4D Effect on this test iMac, just on my Mac Pro on a clean system install.
Now, if Apple said (or says later) oh, wait, in the Trial version some of the Effects are not adjustable, but they are flawless in the paid version, I'd be fine with that. And, if you guys with the paid version and/or Motion installed say it works fine for you, I believe you :-). It's just that several of us were excited to get the Trial. I've been using FCP since 2003 and LOVE this new version. But, until you figure out that you can't use the Inspector with half of the Effects if you are using the Trial version, it just seems like the thing is unusable and crashes constantly - because it does.
Now that I know this, I don't think I've had a SINGLE crash otherwise - even on my "wrong" install on my MacPro with FCP7 and FCPX both on the boot drive.
David -
FCP 10.7 crashes (the whole Macbook Pro) when titles are added
I have a very frustrating problem with FCP. Am on Snow Leopard 10.6.8. 8GB RAM. Was running 10.0.6 but have just upgraded to 10.0.7 - problem persists. I have one video with titles included in it, put together before Nov 28th, that plays and Shares OK. However, ever since about Nov 28th, every time I add a title to a video, it will (sometimes after a few seconds, but always when I try to Share it) crash both FCP and Finder.... I am left with a dead Mac (black screen and unresponsive) and have to force power off by holding down the power button.
Following all the available info on the net I have:
trashed the config files (using Preference manager)
moved out all extraneous Events and Projects (using Event Manager X)
cleared the render files from both the Project and the related Event
clicked on Revert to Original Layout
copied the referenced files onto the Mac Hard Drive (rather than a USB drive) - (yes, I know, I should have the Events, Projects and Media on a non-system drive, but I have no Firewire drive yet... one on order)
(probably some other tips that I have forgotten).
None of this works.
If I add a new title to the 'clean' project (i.e. the one that still works OK with existing titles) then it gives the same problem again.
The fact that it is related to titles suggest to me that it might be font related, but I'm not sure how or why it has happened or how I can revert the system if I have somehow got a corrupt font set.
I do seem to have a hard drive problem in that after I have one of these crash errors, the disk ends up corrupted... as follows:
I can run the disk repair utility from the DVD and it fixes it again. But after the next crash it will be back like this again.
Is this a sign that my hard drive is on its last legs, and this is just a symptom of this? But if so, why is it only Final Cut X that is exhibiting problems?
Any guidance or suggestions from you FCX gurus out there very welcome.
Thanks, bob.OK - so I am now coming down to thinking that this is a MacBook hardware problem with either the graphics card or the graphics memory. I have stripped the Mac down to basics by doing the following:
1) erased hard drive
2) reinstalled snow leopard (10.6.4)
3) performed software update (==> 10.6.8)
4) Installed Final Cut Pro at latest version (10.0.7)
5) Put together simple series of vanilla Apple GIF pictures using 'Boogie Lights' title at the start.
It immediately crashed again with the same symptoms... blank screen and had to hard power off the Mac. The following is the crash dump, and it references GEForce. Is there any expert out there who can look at this and say 'Yep, looks like the hardware'....? I can't see what else it could be given it is a clean install of everything. It just seems strange that it is only FCX that seems to trigger it regularly (though I did have one other crash one other time while in Time Machine)...?
Many thanks in advance....
Interval Since Last Panic Report: 4471 sec
Panics Since Last Report: 1
Anonymous UUID: 218184F3-3B05-4C34-A99A-E1097C20ABEE
Sat Dec 29 10:35:09 2012
panic(cpu 3 caller 0x8354bc9b): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xa60be000 0x0a5480a2, D0, P3/4
Backtrace (CPU 3), Frame : Return Address (4 potential args on stack)
0x818297e8 : 0x21b837 (0x5dd7fc 0x8182981c 0x223ce1 0x0)
0x81829838 : 0x8354bc9b (0x8376128c 0x837d1800 0x8376fe60 0x0)
0x818298d8 : 0x83666608 (0xd70cc04 0xc4a9004 0x100 0xff251547)
0x81829928 : 0x8365d601 (0xc4a9004 0x100 0x81829958 0x8353b778)
0x81829958 : 0x83d809a6 (0xc4a9004 0x100 0x438004ee 0xff211443)
0x81829a98 : 0x836852b5 (0xc4a9004 0xc4a8004 0x0 0x0)
0x81829ad8 : 0x83554e7c (0xc4a9004 0xc4a8004 0x0 0x0)
0x81829b78 : 0x8355155b (0x0 0x9 0x0 0x0)
0x81829d28 : 0x83552af9 (0x0 0x600d600d 0x704a 0x81829d58)
0x81829df8 : 0x82c013c2 (0x81829e60 0x8182a1e0 0x98 0x835547a9)
0x81829f18 : 0x82c017a6 (0xd795404 0x16bbec04 0x6bf541e8 0x8)
0x81829f78 : 0x82c01a91 (0xd795404 0x16bbec04 0x6bf541e8 0x8182a1e0)
0x8182a028 : 0x82c15d83 (0xd795404 0x16bb00e8 0x8182a39c 0x8182a1e0)
0x8182a298 : 0x82bf73f1 (0x6bca6000 0x16bb00e8 0x8182a39c 0x8182a2e8)
0x8182a3f8 : 0x82bf762f (0x6bc06000 0x16bb0000 0x1 0x0)
0x8182a428 : 0x82bfa0ec (0x6bc06000 0x16bb0000 0x4dee0000 0x9855f080)
0x8182a468 : 0x82c1c44a (0x6bc06000 0x16bb0000 0x6bf2f280 0x140)
0x8182a4f8 : 0x82c0dc9b (0x11509b40 0x16bb0000 0x0 0x1)
0x8182a558 : 0x82c0df02 (0x6bf2f000 0x6bf2f788 0x16bb0000 0x0)
0x8182a5a8 : 0x82c0e3d6 (0x6bf2f000 0x6bf2f788 0x8182a8cc 0x8182a86c)
0x8182a8e8 : 0x82c0b1a1 (0x6bf2f000 0x6bf2f788 0x1 0x2209aa)
0x8182a908 : 0x82bd288f (0x6bf2f000 0x6bf2f788 0x16ba7000 0x507617)
0x8182a938 : 0x82c0cc64 (0x6bf2f000 0x8182aa7c 0x8182a968 0x506ad1)
0x8182a978 : 0x82bd6c93 (0x6bf2f000 0x8182aa7c 0x8182aa7c 0x8182a9e0)
0x8182aab8 : 0x82c105d8 (0x6bf2f000 0x1 0x8182abcc 0x8182abc8)
0x8182ab68 : 0x82bd2fe1 (0x6bf2f000 0x1 0x8182abcc 0x8182abc8)
0x8182abe8 : 0x56da06 (0x6bf2f000 0x0 0x8182ae3c 0x8182ac74)
0x8182ac38 : 0x56e2a5 (0x82c61720 0x6bf2f000 0x16499b88 0x1)
0x8182ac88 : 0x56eb59 (0x6bf2f000 0x10 0x8182acd0 0x0)
0x8182ada8 : 0x286638 (0x6bf2f000 0x10 0x16499b88 0x1)
0x8182be58 : 0x21dbe5 (0x16499b60 0x16a825a0 0xa7908 0xc71b)
0x8182be98 : 0x210a86 (0x16499b00 0x0 0x1356a810 0x12c2c340)
0x8182bef8 : 0x216f84 (0x16499b00 0x0 0x0 0x0)
0x8182bf78 : 0x295c57 (0x123a3a28 0x0 0x0 0x0)
0x8182bfc8 : 0x2a256d (0x123a3a24 0x0 0x10 0x123a3a24)
Kernel Extensions in backtrace (with dependencies):
com.apple.GeForce(6.4.0)@0x82bc7000->0x82c7dfff
dependency: com.apple.NVDAResman(6.4.0)@0x834e5000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x827da000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a7da000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x827a5000
com.apple.nvidia.nv50hal(6.4.0)@0x83c4a000->0x8405efff
dependency: com.apple.NVDAResman(6.4.0)@0x834e5000
com.apple.NVDAResman(6.4.0)@0x834e5000->0x837d2fff
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a7da000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x827da000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x827a5000
BSD process name corresponding to current thread: Final Cut Pro
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 3601502848115
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.2.0 (addr 0x81e95000, size 0x65536) - last unloaded 92046415154
loaded kexts:
com.avast.AvastFileShield 1.0.1 - last loaded 2657331436339
com.avast.PacketForwarder 1.3
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.31
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.driver.AppleIntelHDGraphics 6.4.0
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleIntelHDGraphicsFB 6.4.0
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.GeForce 6.4.0
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.AppleUSBTCButtons 201.6
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.driver.AppleUSBCardReader 2.6.1
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.driver.AppleSMC 3.1.0d5
com.apple.nvidia.nv50hal 6.4.0
com.apple.NVDAResman 6.4.0
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.8 GHz, 8 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS725050A9A362, 465.76 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 5
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0xfa120000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 8
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 3 -
When records are added to childEO, getRowCount do not get refresh properly
Hi,
I have an AO between parent EO and child EO - OVRBrowseType . I wrote a business rule on parent EO at entity level. my validation is based on no of records in child EO. After creating the parent record and save, when I try to add 2 child records and save , the bellow validation is fired but, acctIter.getRowCount() returns 0 instead of 2. so it does not enter into the if condition. However if I open an existing parent record with 2 child records, update child record and save, the validation fires and the getRowCount() returns 2.
public boolean validateBrowseTypeIssueDate() {
RowIterator acctIter = this.getOvrBrowseType();
Row bt = null;
System.out.println("debug0 in rowcount: "+acctIter.getRowCount());
if (acctIter.getRowCount() == 2)
bt = acctIter.first();
System.out.println("debug1"+bt.getAttribute("BrowseType"));
if (! "IssueDateBrowse".equals(bt.getAttribute("BrowseType")) )
bt = acctIter.next();
System.out.println("debug2"+bt.getAttribute("BrowseType"));
if (! "IssueDateBrowse".equals(bt.getAttribute("BrowseType")) )
return false;
return true;
}Please advise if there is an alternative way to access childEO from parentEOImpl.
Thanks, PradeepI have not tried the above suggestions but the problem is solved. The issue was - I had the requirement of creating a a default child record when the parent record is created. I was creating the child record using insert statement in Prepared Statement in the doDML of parent EOImpl. So it is not creating a row in the EO and when I add the second record through the application and save, the getRowCount returns 1 which is new record that created through application. Sorry for not providing this info earlier and Thank You all.
Regards, Pradeep -
Determining when components are added...when they aren't added
I have a JPanel within which I can add or remove custom Java2D components. I would like to be able to be notified every time one is added or removed. I first tried setting up a ContainerListener, but it didn't work. I then realized that the reason it didn't work is because I never actually "add" the components to the JPanel, I just call their various draw() methods in the JPanel's paintComponent() method.
So the question would be: how would I set up something to be notified of them being add...er, drawn in the JPanel?I just solved my own problem.
I took my custom Java2D component class, made it extend Component, then did "this.add(whateverTheNameIs);" and "this.remove(whateverTheNameIs);" in the JPanel. Now the JPanel is firing ContainerEvents because the components are actually being added and removed.
I should give myself some Dukes. -
Logging level that will show when rules are added/changed/deleted?
What level of logging on the ASA will enable the syslog to see when a firewall rule has been changed? I know debugging on the config level should be able to, but I don't want to put my firewall through that level of logging for everything.
any help would be greatly appreciated!Hi,
Would seem to me that you would be looking for Syslog messages with the following IDs
111008 (level 5 = Notifications)
111009 (level 7 = Debugging)
111010 (level 5 = Notifications)
Source:
http://www.cisco.com/en/US/docs/security/asa/syslog-guide/logmsgs.html#wp4769400
You can also change a level of a particular Syslog ID without changing the global level configured for certain destination
Lets say you wanted the change the above Debugging level message changed to the Notifications level you would configure
logging message 111009 level notifications
I am not completely sure would you also need to add these to specify how many of such log messages could be generated and in what timeframe. Though there is an option for "unlimited" also.
logging rate-limit message 111009
logging rate-limit message 111008
logging rate-limit message 111010
- Jouni -
Mail Crashes when attachments are added
My mail application on my intel core iMac has just started crashing when I try to attatch a document.
Any one any Ideas?
iMac / eMac / Mac book pro/ intel core imac Mac OS X (10.4.4) Airport Extreme / Express / Belkin 54g PCMA card
iMac / eMac / Dell Laptop Mac OS X (10.4.4) Airport Extreme / Express / Belkin 54g PCMA cardOK. Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list.
Also, try using a different method to connect to Internet, if possible, or connecting the computer to Internet as directly as possible, i.e. bypassing any routers that might be present, using an ethernet cable instead of wireless, etc., and see whether that makes a difference.
You may also want to take a look at the following thread, in case some of the suggestions provided there work for you:
Mail keeps hanging -
Shuffle locks up when songs are added
I have Reset, Restored, Reinstalled, and I am still having trouble with the Shuffle. It syncs fine to iTunes and shows up in the Devices section. As soon as I drag a song, or any number of songs to the device to add them, the display in iTunes reads Syncing iPod/Updating Files, but never finishes. iTunes stops responding as well. Any help would be appreciated.
Same here, though I can usually succeed when copying one (short) track at a time. If I drag over a half-hour podcast track, it freezes on that too. On a playlist of many tracks, it freezes on the second one. iTunes goes into heavy CPU usage (it tries for 100%), but no detectable disk activity.
Force-quit of iTunes gets my CPU time back, but iTunes' ghost remains. Activity Monitor shows the process gone, but the Dock, command-Tab, and force-quit all show iTunes still "running". At this point, I have to logout to clear it up. Usually, I have also had to force-shutdown with the power button because logout gets nearly there and locks up.
iTunes 7.4.2 (4)
iPod Shuffle Software 1.0.3
Maybe you are looking for
-
Pricing errors are not cleared after fixing the master data
Hi All, Kindly go through the issue explained below. Pricing is determined properly in transaction level(Oppt) when the master data is correct. cool. System shows pricing error (Mandatory condition 0PR0 is missing, Pricing could not be determined)
-
Hi All, I have set up the Condition Record to allow the automatic emailing of PO's to vendors. However I have jusy one query - it appears unless the Output Device is populated in the Condition Record, it will not appear automatically in the PO. Is t
-
How do I re-activate my apple id
I had an unauthorized downlod for an app that charged me a significant amount of money. So I called and Apple reimbursed me the funds but disabled my apple id now I cannot re-activate my account. i have tried reseting my password several times and th
-
I have an add-on that is keeping me from opening my email, please advise
I cannot open my godaddy email any more
-
Hello, We are using presently Oracle Designer 2000 with Oracle 7.3.4. We are moving to oracle 8i and I would like to know if we have to pay for a new version of Designer (Designer 6i). Thank you very much. Melanie