Skipping request for user policy assignments due to agent configuration for authority

Hello all,
Symptoms:
The Configuration Manager only shows the following actions:
Application Deployment Evaluation Cycle
Machine Policy Retrieval & Evaluation Cycle
Software Updates Deployment Evaluation Cycle
User Policy Retrieval & Evaluation Cycle
In Software Center there are no applications visible. Also the default 'IT Organization' is shown instead of the 'real' name.
The Confugration Manager:
shows in the tab 'General' the correct Management point. Connection type is 'currently intranet' (ok)
shows in the tab 'Site' the correct site code.
shows in the tab 'Components' all components as either 'installed' or 'enabled'. Only CCM Notification Agent shows 'Disabled'.
In SCCM 2012 under 'Client Settings' -> 'Default Settings' -> 'Client Policy' the setting 'Enable User policy on clients' has been enabled.
Done so far (without success):
Re-installed the MP
Run a query on the SCCM Database to check if there are any corrupt records. There are not.
Installed version 5.00.7958.1000
CCM Framework: 5.00.7958.1203
The computer is installed with a task sequence. There is a reboot after 'Setup Windows and ConfigMgr (CM2012 R2 CU1)'.
Installation command of the SCCM Client (during OSD deployment):
SMSCACHEFLAGS=PERCENTDISKSPACE SMSCACHESIZE=10 SMSSLP=demo-sccm.demoforest.local SMSMP=demo-sccm.demoforest.local PATCH="%_SMSTSMDataPath%\OSD\TDS00020\KB2938441\configmgr2012ac-r2-kb2938441-i386.msp"
Content log files on the client:
PolicyAgent.log:
Processing PreShutdown event PolicyAgent_RequestAssignments 8/4/2014 11:56:52 PM 2204 (0x089C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/4/2014 11:57:37 PM 2436 (0x0984)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/4/2014 11:57:37 PM 2436 (0x0984)
Registered for MP notifications. PolicyAgent_PostStartup 8/4/2014 11:57:37 PM 2436 (0x0984)
Not rerequesting policy on site code change in provisioning mode. PolicyAgent_ReRequestPolicy 8/5/2014 12:01:55 AM 3212 (0x0C8C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:02:48 AM 2352 (0x0930)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:02:48 AM 2352 (0x0930)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:02:48 AM 2352 (0x0930)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Triggered update of user S-1-5-21-1840543543-1948091412-3654635223-1109 settings PolicyAgent_RequestAssignments 8/5/2014 9:00:57 AM 3232 (0x0CA0)
Requesting User policy assignments for 'S-1-5-21-1840543543-1948091412-3654635223-1109' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
Requesting User policy from authority 'SMS:TDS' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
Skipping request for user policy assignments due to agent configuration for authority 'SMS:TDS'. PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
ClientIDManagerStartup.log:
[----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:24:34 AM 372 (0x0174)
Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
SID unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
HWID unchanged ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
 Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
 Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
 Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
 Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
 Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
 HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
 HardwareID2=98130500010000EE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Failed to open to WMI namespace '\\.\root\ccmvdi' (8007045b) ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
[----- SHUTDOWN -----] ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
[----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:25:42 AM 2012 (0x07DC)
Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
SID unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
HWID unchanged ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
 Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
 Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
 Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
 Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
 Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
 HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
 HardwareID2=98C70600010000EE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
ClientAuth.log:
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
ClientLocation.log:
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:24:53 AM 2932 (0x0B74)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:24:54 AM 2932 (0x0B74)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:54 AM 2932 (0x0B74)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:25:53 AM 2504 (0x09C8)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:25:53 AM 2504 (0x09C8)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Getting Assigned Site ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
Assigned Site is TDS ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
Getting Assigned Site ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
Assigned Site is TDS ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
execmgr.log (with errors):
Requesting MTC to delete task with id: {C5DCEE82-C903-4CBD-98CC-534646B3EFD7} execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
This execution request does not own the corresponding task in MTC, returning without deleting it from MTC. execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
Service startup. execmgr 4/22/2014 7:16:09 PM 2332 (0x091C)
Service startup. execmgr 4/22/2014 9:17:36 PM 2216 (0x08A8)
Service startup. execmgr 4/22/2014 9:23:02 PM 2348 (0x092C)
Service startup. execmgr 4/22/2014 9:24:53 PM 1000 (0x03E8)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 3224 (0x0C98)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 1292 (0x050C)
Service startup. execmgr 8/4/2014 11:57:32 PM 3696 (0x0E70)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:57:33 PM 3696 (0x0E70)
Software distribution agent was enabled execmgr 8/5/2014 12:01:55 AM 3448 (0x0D78)
Service startup. execmgr 8/5/2014 12:02:44 AM 2272 (0x08E0)
ExecMgr::GetTaskState - GetTaskState Failed with error code 0x87d00317 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
Policy arrived for child program Install execmgr 8/5/2014 12:03:02 AM 1648 (0x0670)
Creating mandatory request for advert TDS20014, program Install, package TDS00014 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
An existing MTC token was supplied, this execution request is not owner of MTC object. execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
CertificateMaintanance.log:
HTTP is selected for Client. The current state is 0. CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
 DateTime = "20140422164904.539000+000";
 HRESULT = "0x00000001";
 ProcessID = 3320;
 ThreadID = 604;
 CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
 ClientID = "GUID:7ff40832-4c01-456f-9705-096da67985b3";
 DateTime = "20140422164946.336000+000";
 HRESULT = "0x00000001";
 ProcessID = 3320;
 ThreadID = 3216;
 CertificateMaintenance 4/22/2014 6:49:46 PM 3216 (0x0C90)
HTTP is selected for Client. The current state is 0. CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
 DateTime = "20140804215639.612000+000";
 HRESULT = "0x00000001";
 ProcessID = 2144;
 ThreadID = 2212;
 CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
 ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
 DateTime = "20140804215651.440000+000";
 HRESULT = "0x00000001";
 ProcessID = 2144;
 ThreadID = 3348;
 CertificateMaintenance 8/4/2014 11:56:51 PM 3348 (0x0D14)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/4/2014 11:56:56 PM 1096 (0x0448)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:02:33 AM 1656 (0x0678)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:11:17 AM 384 (0x0180)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:24:34 AM 372 (0x0174)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:25:42 AM 2012 (0x07DC)
smscliui.log:
Perform Action: Request & Evaluate User Policy - {3A88A2F3-0C39-45fa-8959-81F21BF500CE}. Message sent, id={FC736B58-2635-45B8-8002-E7C8D6CCEB8D} smscliui 8/5/2014 9:02:34 AM 2484 (0x09B4)
Current Assigned Site: TDS smscliui 8/5/2014 9:02:38 AM 868 (0x0364)
Currently assigned FQDN:  smscliui 8/5/2014 9:02:41 AM 868 (0x0364)
Failed to set DNSSuffix value to the registry. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
SMS Site code has not been changed. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
Current Assigned Site: TDS smscliui 8/5/2014 1:19:20 PM 2160 (0x0870)
CcmMessaging.log:
Queue 'StateMessageManager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'StateMessageManager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'CTMDTSReply'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'CTMDTSReply' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'CTMDTSReply'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'execmgr'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'execmgr' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'execmgr'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_RequestAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_RequestAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_RequestAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'ClientRegistration'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'ClientRegistration' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'ClientRegistration'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'EndpointProtectionAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'EndpointProtectionAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'EndpointProtectionAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'LS_ScheduledCleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'LS_ScheduledCleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'LS_ScheduledCleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_Cleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_Cleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_Cleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'DCMAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'DCMAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'DCMAgent'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'CertEnrollAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'CertEnrollAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'CertEnrollAgent'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'ExternalEventAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'ExternalEventAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'ExternalEventAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'UpdateStore'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'UpdateStore' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'UpdateStore'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_ReplyAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_ReplyAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_ReplyAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'SMSSHA'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'SMSSHA' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'SMSSHA'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'lmp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'lmp_[http]mp_locationmanager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'lmp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'mp_statusreceiver'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'mp_statusreceiver' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'mp_statusreceiver'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'mp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'mp_[http]mp_locationmanager' initialized with 1 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'mp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Raising event:
instance of CCM_CcmHttp_Status
 ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
 DateTime = "20140804232553.423000+000";
 HostName = "DEMO-SCCM.demoforest.local";
 HRESULT = "0x00000000";
 ProcessID = 1996;
 StatusCode = 0;
 ThreadID = 2504;
 CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
 ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
 DateTime = "20140804232553.485000+000";
 HostName = "DEMO-SCCM.demoforest.local";
 HRESULT = "0x00000000";
 ProcessID = 1996;
 StatusCode = 0;
 ThreadID = 2504;
 CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
 ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
 DateTime = "20140804232553.563000+000";
 HostName = "DEMO-SCCM.demoforest.local";
 HRESULT = "0x00000000";
 ProcessID = 1996;
 StatusCode = 0;
 ThreadID = 2504;
 CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
 ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
 DateTime = "20140804232553.657000+000";
 HostName = "DEMO-SCCM.demoforest.local";
 HRESULT = "0x00000000";
 ProcessID = 1996;
 StatusCode = 0;
 ThreadID = 2504;
 CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
 ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
 DateTime = "20140804232606.048000+000";
 HostName = "DEMO-SCCM.demoforest.local";
 HRESULT = "0x00000000";
 ProcessID = 1996;
 StatusCode = 0;
 ThreadID = 2508;
 CcmMessaging 8/5/2014 1:26:06 AM 2508 (0x09CC)
Raising event:
instance of CCM_CcmHttp_Status
 ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
 DateTime = "20140804232606.110000+000";
 HostName = "DEMO-SCCM.demoforest.local";
 HRESULT = "0x00000000";
 ProcessID = 1996;
 StatusCode = 0;
 ThreadID = 2188;
 CcmMessaging 8/5/2014 1:26:06 AM 2188 (0x088C)
Raising event:
instance of CCM_CcmHttp_Status
 ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
 DateTime = "20140804232606.188000+000";
 HostName = "DEMO-SCCM.demoforest.local";
 HRESULT = "0x00000000";
 ProcessID = 1996;
 StatusCode = 0;
 ThreadID = 2504;
 CcmMessaging 8/5/2014 1:26:06 AM 2504 (0x09C8)
CcmNotificationAgent.log:
Bgb client agent is starting... BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
Bgb client agent is disabled BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
TCP Listener is disabled. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
BgbController main thread is started with settings: {bgb enable = 0}, {tcp enabled = 0}, {tcp port = 0} and {http enabled = 0}. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
Wait 3600 seconds for event notification. BgbAgent 8/5/2014 1:26:05 AM 3076 (0x0C04)
Wait 3600 seconds for event notification. BgbAgent 8/5/2014 2:26:05 AM 3076 (0x0C04)
Any help is appreciated and with kind regards,
Willem-Jan

Hello all,
I modified the TS, but the problem is still there.
smsts.log:
==============================[ OSDSetupHook.exe ]============================== OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Executing task sequence OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat". OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Debug shell is enabled OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Successfully enabled debug command shell support. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Configuring local administrator account OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Re-assign all drive letters... OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Could not open drive Q:\ (80070005) OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Ignoring inaccessible volume 'Q:' with error 0x80070005 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
No partition needs to be udpated. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Installing SMS client OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Client already installed. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Moving logs to SMS client directory OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Successfully moved logs to SMS client log directory: C:\Windows\CCM\Logs\SMSTSLog OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Executing task sequence manager bootstrap OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Executing command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Current OS version is 6.1.7601.1 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Logging successfully initialized. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Resuming Task Sequence in Full OS TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
We are going in GINA and potentially need to set the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
setting the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Executing command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
==========[ TsProgressUI started in process 2196 ]========== TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Registering COM classes TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
sbModulePath = C:\Windows\CCM\TsProgressUI.exe TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Unregistering class objects TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Shutdown complete. TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Process completed with exit code 0 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Successfully registered TS Progress UI. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Found network adapter "Intel 21140-Based PCI Fast Ethernet Adapter (Emulated)" with IP Address 5.5.5.101. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Starting Task Sequence Manager. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
executing TS Manager not in full media TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
executing TS Manager in c:\windows\ccm TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Executing command line: "TsManager.exe" TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Successfully intialized Logging for TS Manager. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Commandline: "TsManager.exe" TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/service parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/standalone parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/noclient parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Successfully registered Task Sequencing COM Interface. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Executing as a standalone exe TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Initializing TS Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Opening Task Sequencing Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
NOT executing in WinPE TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling Config policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling config policies... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SysHealthConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSysHealthClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 684, uncompressed size 4652. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SoftUpdConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSWUpdateClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1922, uncompressed size 19242. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SoftDistClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSoftDistClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1327, uncompressed size 13740. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling NAAConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSNAAConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1022, uncompressed size 6494. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling RebootSettingsConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSRebootSettingsConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 433, uncompressed size 1556. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_RebootSettings.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling AppManClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSAppManClientConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 982, uncompressed size 6358. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Get Install Directory for SMS Client TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Updating settings in \\.\root\ccm\policy\machine\actualconfig TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 435 TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3}") AND (PolicyState
= "Active") AND (PolicyType = "Machine") TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:TDS") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:50 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:51 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 9 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 11943 TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:57 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Total RequestedConfig policy instance(s) : 12387 TSManager 8/5/2014 4:52:00 PM 2244 (0x08C4)
New/Changed ActualConfig policy instance(s) : 0 TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Policy evaluation initiated TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace  TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"'  TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"'  TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"'  TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine'
The Powershell command as described by NPerson give the output:
C:\Windows\system32>powershell Invoke-WmiMethod -Namespace root\CCM -Class SMS_C
lient -Name SetClientProvisioningMode -ArgumentList $false
__GENUS          : 1
__CLASS          : __PARAMETERS
__SUPERCLASS     :
__DYNASTY        : __PARAMETERS
__RELPATH        : __PARAMETERS
__PROPERTY_COUNT : 1
__DERIVATION     : {}
__SERVER         : DEMO-CAPTURE
__NAMESPACE      : ROOT\ccm
__PATH           :
\\DEMO-CAPTURE\ROOT\ccm:__PARAMETERS
ReturnValue      :
PSComputerName   : DEMO-CAPTURE
It is about the PSComputerName: that is the name of the machine on which the capture was made. So I suppose the problem is already in the image. Is my statement correct or is it not relevant?
With kind regards,
Willem-Jan

Similar Messages

  • Admin Services for Users Blog   How to crank up blog for imac/~user

    I want my users to have their own blog and wiki
    Server Admin
    Web
    Web Services
    Services for Users -- implies that it can be so with a check box to turn on webmail and blog
    but I cant find any info about turing it on for users...
    Any ideas?
    (Group wikis are working fine)

    Navigate to http://imac1.local/users/username
    viola!
    well, not quite,
    404: User is not allowed a Weblog
    How does one turn that on???

  • Look for USER EXIT/Program similar with BADI:  BADI_SCD_ACCTG for SAP 4.5B

    Hello SAP Guru,
              We are having the challenging in performing posting to multiple G/L accounts per shipment. This is required, for example, if customer, interplant, and/or inbound orders are combined onto one shipment.
             We found this BADI that allows system to work the way we want; however, BADI is not support in 4.5B.
             This BADI is linked to enhancement LMR1M002 and function module MR_ACCOUNT_ASSIGMENT. Please refer to note 64204.
             Please advise, I am looking something similar that work in SAP 4.5B.
    Regards,
    Song

    Hi,
    Please try this:
    Enhancement  LMR1M002                             Account grouping for GR/IR account maintenance                    
    Enhancement  MRMH0001        Logistics Invoice Verification: ERS procedure                    
    Enhancement  LMR1M001                             User exits in Logistics Invoice Verification          
    Enhancement  LMR1M005                             Logistics Inv. Verification: Release Parked Doc. for Posting          
    Enhancement  LMR1M004          Logistics Invoice Verification: item text for follow-on docs                    
    I hope this may helpfull and let me know wht exactly the business needs so I can give you some more exits.
    Thank you,
    Thanks,
    AMS

  • Agents configuration for the top level Organization

    I was experimenting with this feature and was wondering if it works. I have an IIS 6.0 policy agent installed and it is working correctly. I added a new agent for the top level org and set the name, password to the amldapuser password, and agentRootURL key value. I then edited the AMAgent.properties file of the IIS 6.0 policy agent and changed the com.sun.am.policy.am.username to the one I created. Upon restart the policy agent could not authenticate. I then set the am.password the clear text password and got the same result. Has anyone got this to work?

    Hi ,
    I've Been Following this forum for quite a long time,This has been a good resource for the people working on Identiry Management. A problem has been hindering me from completing the authentication part in my project.
    I've configured the Policy Agent in AMAgent.property file as URL_POLICY mode,which
    would redirect the user to the User Home Page mentioned in the
    registration page of Identity server. what other configurations need to be changed to make this work.
    Thanx,
    Daniel Prem Kumar B.S.
    Hyderabad , India.

  • Agent configuration for Liberty-based federation

    Hi all,
    I am using AccessManager 7.1, and I was wondering to test the liberty-based federation authentication. I configured my authentication domain in the AM server, but then I had to configure the agent.
    In the tutorial there's information about how to configure it:
    Point the com.sun.am.policy.loginURL property in the AMAgent.properties file to the pre-login service URL running on Access Manager.
    but the j2ee agent (2.2 for tomcat) I installed has no property like that. I found something similar: the com.sun.identity.agents.config.login properties list, but I'm not sure I can use this instead of the loginURL property. Moreover, there are some webservices related properties like com.sun.identity.agents.config.webservice.enabled. The default value for the webservice.enabled is false, I suppose it must be changed to true, but what about the endpoints list? The authenticator property must point to an implementation class, so it is not what I need.
    How can I configure the agent to protect web services?
    Thank you.

    Hello Davinder,
    Even though the parameter is there, it must be accessible for checking.
    In order to get the profile value of the managed system we use a webservice handled by sapstartsrv on port 56013. It seems that this port is not listening: sapstartsrv is probably stopped.
    You can see it here:
    "!! Exception : Service call exception; nested exception is:
    java.net.ConnectException: Connection
    refused(cause=java.net.ConnectException Connection refused)"
    Would you please check that sapstartsrv is up and running, then check that port 56013 is listening and then please restart the setup.
    Note that your port number might be different.
    Additional information:
    As mentioned in the Note 936273,
    "The start service is integrated into the Unix operating system using the
    "sapinit" script as well as entries for each instance in
    "/usr/sap/sapservices" (see Note 823941 (UNIX) or Note 893215(IBM i)).
    So please check the Note 823941 and 936273 to set up the autostart of the sapstartsrv. Then restart your system and then you can check whether  sapstartsrv is started by
    - 'ps -ef   grep sapstartsrv' command.
    - '/sbin/init.d/sapinit status' command.
    Best regards,
    Guilherme

  • Pause for user click missing after Seamless Tabbing fix.

    I am upgrading a project from Captivate 5.0 to 5.5. Two of the lessons that worked fine in 5.0 have problems in 5.5. Both lessons use the Tab key to move from field to field in a data row and then the Enter key to calculate at the end of the row. This worked fine in 5.0. In 5.5, pressing Tab caused jump to browser address window. I searched blog and found following solution to add:    so.addParam(seamlessTabbing:, :false:);        to the htm file generated when publishing the file. This is not a desirable solution for long term course maintenance, but it did work. Unfortunately a new problem then appeared. The project moved ahead without waiting for user input in the simulation exercises.
    For slides with click boxes using Tab shortcut key and no other interactive objects, the movie just skipped ahead without waiting for user click. I would like the project to pause until the user presses the Tab key and then move to the next slide.  The properties for the click boxes are:
    Action:
    On success: Go to the next slide
    Attempts: Infinite
    Allow mouse click - yes
    Shortcut: Tab
    Options:
    Captions: Failure only
    Others: Pause for Success/Failure Captions and Pause project until user clicks
    Timing:
    Display for: Rest of slide
    Appear after 0 seconds   (I have played around with this setting, but it does not seem to make a difference.)
    For slides with Text Entry, the failure captions display before the user has a chance to input anything. Sometimes the captions flash several times at random. I would like the failure captions to only display when the user  enters an answer that does not match the stored answers.  The properties for the text entry boxes are:
    General:
    Default text: blank
    Retain Text - checked
    Validate User Input - checked
    Var Associated: Text Entry Box ## (## changes from slide to slide)
    On Focus Lost: No action
    Action:
    On Success: Go to the next slide
    Attempts: Infinite
    Shortcut: Tab
    Options:
    Captions: Failure only
    Others: Pause for Success/Failure Captions
    Timing:
    Display For: Rest of slide
    Appear after: 0.5 sec.
    Pause After: 1 sec
    Transition: No Transition
    To test whether it was something I was doing in the editing, I went back to the original 5.0 version of the lesson and imported into 5.5 again and published without doing any editing. The lessons that worked fine in 5.0 did not work in 5.5. Then I tried replacing all the click boxes with new ones created in 5.5. That did not work. I tried adjusting the timing. That did not work. For the text entry boxes, I tried using Show Button, creating transparent button with Tab shortcut. That did not work. Several of these suggestions were ones that I found elsewhere in the Blog with similar but not identical problems. I never found a problem that combined the seamlessTabbing with the missed pauses.
    I am puzzled and frustrated that these lessons that worked fine in 5.0 don't work in 5.5. Our primary edit is only to update the screen images and add a few new fields. I would often reposition an object on the slide, but not change its properties. Since most of the lessons are working fine in 5.5 and only these two that heavily use the Tab key are not working in 5.5. I don't really have the option of going back to 5.0. I need to put them in an aggregator and they all need to be the same version.
    Is there a patch or a quick fix? Also, can the patch to the htm file be built in or is that what is causing the problem? For future course maintenance, it will be complicated to have to treat these two lessons specially. Also, we usually link to the swf file and not the htm file. Our users often use browsers other than Internet Explorer.
    Any suggestions?   Thanks in advance.

    It would seem Intego Virus Barrier X6 has an intermittent habit of putting the IP address of Apple TV into the Blocked Addresses list despite having checked the 'Trust Apple TV' box and inputting the address into the Trusted Addresses list. Over the course of less than a year this has occurred approximately 4 times to me. My last variation on getting to the root of the problem was to lock the settings with the padlock. I will monitor the situation and should it happen one more time will notify Intego of this 'bug'.

  • EAP TLS for machine and EAP PEAP for user

    Hi forum
    I am doing a design to use ISE to enforece dot1x for corporate machinese on both wired and wireless.
    Due to the particular environment, we will need to use EAP-TLS for machines auth and on top of that use EAP-PEAP for user auth with windows credential and posture for full access.
    Just wondering if anyone has done this before:
    1. Will this work?
    2. Any gottas?
    3. what is the user experience like?
    All machines are win7 based.
    Thanks

    You can not use the native supplicant for this. Cisco Anyconnect NAM will allow you to use this method. It is very simple to configure and deploy.
    Tarik Admani
    *Please rate helpful posts*

  • Authentication for user weblogic denied

    I am unable to start node managerd server from command prompt.
    I installed WebLogic Server Version: 12.1.2.0.0 on Windows 2008 R2 EN Sp1
    I started Administration Server succesfully.
    C:\Weblogic\Oracle\config\domains\wl_server\bin\startWebLogic.cmd
    I created ihale Managed server but  I couldn't start Managed Server.
    C:\Weblogic\Oracle\config\domains\wl_server\bin
    startManagedWebLogic.cmd ihale http://192.168.1.29:7431 
    I'm getting following error.
    ####<Dec 25, 2013 12:51:13 AM PST> <Critical> <WebLogicServer> <umman> <ihale> <main> <<WLS Kernel>> <> <> <1387961473813> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user weblogic denied.
    weblogic.security.SecurityInitializationException: Authentication for user weblogic denied.
    Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Authentication Failed: User weblogic weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090295]caught unexpected exception
      at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:257)
    I am able to login administration console same username and password. Username: weblogic Password:xxxxx
    I changed the weblogic user password and I tried again. It was unseccesfull.
    I created boot.properties file in C:\Weblogic\Oracle\config\domains\wl_server\servers\ihale\security folder.
    I put username and password.
    After I tried to start ihale managed server, boot.properties file didn't encrypted and managed server also didn't started.
    I deleted cache, data, tmp folders except logs folder in \\192.168.1.29\c$\Weblogic\Oracle\config\domains\wl_server\servers\ihale and I tried again. It was unseccesfull.
    I found something on https://community.oracle.com/message/10653470
    Ganesh says:
    Did you restart AdminServer after deleting the LDAP Authentication provider?
    I think your managed server is still trying to authenticate user through ldap authentication provider.
    Torrado answers:
    I found that there was a definition in Security Policy of osb_server1 for an user that belonged to deleted LDAP authenticator.
    I deleted it and server started.
    Thanks.
    How can I delete definition in Security Policy of ihale for an user that belonged to deleted LDAP authenticator?
    Could you please help to solve this problem?
    Best Regards.

    Hi,
    You can rename the ldap folder in following directory structure.
    %Domain_Name% / servers / <servername> / data/
    You will find ldap folder try to rename that folder and then please restart the server again.
    If you are try to start through nodemanager then rename the nodemanager under following directory.
    %Domain_Name% / servers / <servername> / data/.
    Try to rename these two folder and restart the nodemanager and start the server again.
    It will work for you.
    Regards,
    Kal

  • Authentication for user weblogic denied problem when starting managed serve

    Hi All,
    I have a strange situation here. I installed WLS and SOA and BAM servers. Initially I could start both WLS and SOA.
    Later I changed some files (possibly startManagedWebLogic.sh or deleted soa_server1/data/ldap/ or AdminServer/security/boot.properties), but later I remember I changed them back. I am now seeing that my WLS is starting up fine, but SOA is not. I am always getting the error:
    <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
    weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:965)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    Truncated. see log file for complete stacktrace
    Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Authentication Failed: User weblogic weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090295]caught unexpected exception
    at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:251)
    at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
    at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    Truncated. see log file for complete stacktrace
    >
    I tried to go to admin console to change/verify the password for weblogic user, and then put plaintext password in AdminServer/security/boot.properties, then restart Adminserver. But I still cannot start SOA server.
    Could you please let me know how to resolve this issue? I do want to save my environment at this point. Many thanks.

    Hi,
    My understanding is admin user server is coming up fine but when you try to bring the soa_server1(managed instance) is not coming up due the below mentioned exception.
    If not please correct me.
    I have a few query, please give me comment on this.
    1) Admin and managed instances are running on the same box or different
    2) Did you try to reset the password from console or using weblogic.security command
    3) Did you cleared the soa_server1 temp directory(server/soa_server1/*)
    Solution-1 (If Domain running on different box)
    =============================
    1) Copy the DefaultAuthenticatorInit.ldift file from Domain_dir/Security/ to Remote machine - Domain_dir/Security/
    Note- Remote machine - take a backup of DefaultAuthenticatorInit file.
    2) Remote machine- rename or take a backup of ldap directory and boot.properties file
    /servers/soa_server1/ldap
    /servers/soa_server1/security/boot.properties.
    3) Now try to brought up the soa_server1.It will prompt you the username and password.
    Please let me know.
    Thanks,
    Rajkumar

  • Duplicate SPN for user accounts

    Hi Support,
    I get an error on the system log like the below - but is bringing up a user account rather tham for a computer account; for duplicate SPN:
    The KDC encountered duplicate names while processing a Kerberos authentication request. The duplicate name is username. (of type -17). This may result in authentication failures or downgrades to NTLM. In order to prevent this from occuring remove the duplicate
    entries for username in Active Directory.
    Steps in the article KB321044 is for computer accounts and not for user accounts; is there any relevant steps for user accounts having duplicate SPNS ?
    Thanks,
    Arun

    I've followed the above steps and does not seem to resolve my issue and the below error on system log repeats:
    Log Name: System
    Source: Microsoft-Windows-Kerberos-Key-Distribution-Center
    Date: 20/08/2014 10:29:49
    Event ID: 11
    Task Category: None
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: xxxxxxx.xxxxxxx.internal
    Description:
    The KDC encountered duplicate names while processing a Kerberos authentication request. The duplicate name is [email protected] (of type -17). This may result in authentication failures or downgrades to NTLM. In order to prevent this from occuring remove the duplicate entries for [email protected] in Active Directory.
    * Setspn -x command on Server does not list any duplicate SPNs
    * Followed http://support.microsoft.com/kb/321044 , but output does not give any duplicate SPNs
    * Referred this article and SPN shows only one value and no duplicates:
    http://blogs.technet.com/b/qzaidi/archive/2010/10/12/quickly-explained-service-principal-name-registration-duplication.aspx
    * Tried re-registering SPN for the account sphilpot as per this article - which :
    http://msdn.microsoft.com/en-IN/library/ms191153.aspx#Manual
    Not sure this will fix the issue.
    { Noticed Disk error on System event log noticed: " The driver detected a controller error on
    \Device\Harddisk1\DR1 "
    For which asked to remove/format the Expansion S drive and test }

  • Can't start managed server - Authentication for user denied

    Greetings,
    I have a WebLogic 10.3.6 based domain. The admin server works correctly. Using the admin console, I created a managed server. It is not associated to any machine and I don't use node manager. The managed server listens on localhost:7101 while the admin listens on localhost:7001. Starting the managed server asks for an user/password authentication. Using the same as the one used for the admin console says:
    <7 dÚc. 2012 13 h 55 CET> <Critical> <Security> <BEA-090403> <Authentication for
    user nicolas denied>
    <7 dÚc. 2012 13 h 55 CET> <Critical> <WebLogicServer> <BEA-000386> <Server subsy
    stem failed. Reason: weblogic.security.SecurityInitializationException: Authenti
    cation for user nicolas denied
    weblogic.security.SecurityInitializationException: Authentication for user nicol
    as denied
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.do
    BootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:966)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
    itialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
    erviceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    Truncated. see log file for complete stacktrace
    Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Auth
    entication Failed: User nicolas weblogic.security.providers.authentication.LDAPA
    tnDelegateException: [Security:090295]caught unexpected exception
    at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.log
    in(LDAPAtnLoginModuleImpl.java:251)
    at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(Log
    inModuleWrapper.java:110)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.bea.common.security.internal.service.LoginModuleWrapper.login(Log
    inModuleWrapper.java:106)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    Truncated. see log file for complete stacktrace
    >
    <7 dÚc. 2012 13 h 55 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state c
    hanged to FAILED>
    <7 dÚc. 2012 13 h 55 CET> <Error> <WebLogicServer> <BEA-000383> <A critical serv
    ice failed. The server will shut itself down>
    <7 dÚc. 2012 13 h 55 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state c
    hanged to FORCE_SHUTTING_DOWN>
    I googled a while and found a post saying that the realm is probably altered or in an incorrect status. I reset the the admin's credentials using weblogic.security.utils.AdminAccount but this disn't change anything. Of course, upon the managed server creation, I initialized the fierlds user and password in the server starting tab of the admin console.
    Many thanks for any help.
    Nicolas

    Hi,
    Have you configured LDAP Authenticator on the server?
    If yes, afther the change did you restart both the servers - admin and managed?

  • Function modules for User check and Product search

    Hi,
    Please give me the names of function module which are used for user login check, and Product search.
    Thanks,
    Devender V

    Hi,
    For User login check belwo Function module,
    SUSR_LOGIN_CHECK_RFC for ECC/R3
    CRM_ISA_LOGIN_R3USER_CHECKS for CRM
    For product try below Function module.
    BAPI_MATERIAL_GET_DETAIL
    I hope this information will help you.
    Regards.
    eCommerce Developer

  • ERROR: user is not configured for keystore 'service_ssl'

    hi experts:
    System environment:
    pi7.0  j2ee sp09
    ECC6.0 patch level11
    Here is my scenarios..
    ECC6.0-->(IDOC)XI(CIDX)--
    >External system.
    External system-->(CIDX)XI(IDOC)--
    >ECC6.0
    1.we have got there certificates from external system (rootCA.DER,intermedia.DER,Server.DER), imported the 3 certs files to TrustedCAs view using VA tool after we configured the SSL enable.
    2.We generated the CSR file and got the response from CA. we import the CSR response to SERVICE_SSL service
    3.I have assigned the role(keystoreadministrator) to user(PIAFUSER,PIAPPLUSER) in security provide service.
    4.I configured the IR and ID for the first sceniro. I Selected the "service_ssl" view and "TrustedCAs" view in received agreement in ID, and selected the "service_ssl" view in comunication channeland. actived all of them.
    issue :
    as soon I trigger the message to external. It is OK in monitor for processed XML Message.
    BUT I got the error message in runtime workbench/adapter engine/communication channel mornitoring.
    Channel Name: Buyer_Send_OrderChange
    Receiver Agreement: |com_sap_abap_r3_200|Sell_elemic|CIDX_E45_20_seller|OrderChange
    Security Settings > Current certificate configured for signing:
    ERROR: user is not configured for keystore 'service_ssl'
    Security Settings > Partner certificate configured for signing:
    ERROR: user is not configured for keystore 'TrustedCAs'
    Thanks!!.

    The question have been solved ..
    thanks!
                         xixi

  • Print the user id in output of the report for tcode MB52.

    Dear friends,
    I want to print the User ID in the output of the report MB52. is it possible in std reports.
    thanks in advance,

    Hello Apraveen,
    It is not advisable to change any standard SAP program instead you can go for an enhancement approach.
    What you can do is search for USER EXITS or BAdi (Business Add-Ins) for the standard program of MB52.
    Now, check the execution of these user-exits or BAdi and place your code.
    Hope this solves your problem.
    Thanks & Regards,
    Tarun Gambhir

  • Reports not visible for users

    HI,
    I had designed few reports in SD and MM. how do i link those reports for users. and generally what is the path for the users to see the reports in BEX.
    Thanks in advance
    Ravi

    Hi Ravi,
    Create a role (PFCG) for your users and provide them access to view and run the reports and then you save the reports to that role. Then the users will be able to view and run the reports.
    If you save the reports to favourite, only you will bve abel to see them as it is specific to you.
    Hope this helps,
    ***Assign points if helpful***
    Regards,
    Kalyan

Maybe you are looking for

  • MOSS 2007 Custom Theme Images Invisible to Users

    Hi, Our MOSS 2007 Site uses Custom Theme and the theme uses image for styling navigation background. The issue is the when a user logs in to site he is not able to view the navigation background image whereas when a user with full control logs in to

  • Dynamic Selection Button issue

    Hi All, I am working on a ZReport which has a requirement to be added with a dynamic selection button. This Button should be same as AR01 transaction. I have added the ADA logical database and also the NODES inside the program. I got the button on se

  • Why there is animations/graphics difference betwee...

    i saw a video on youtube regarding comparison between display of n8 vs 701.nowadays,i have my n8 updated to belle.the question arises that  why arent the animations and effects shown during the opening of videos in 701 available in n8 belle?i dont th

  • Baixei_a_versão...mas_não_abre......por_que?

    não consigo abrir o cs......

  • Address card prefixs in Mail

    Is it possible to have Mail include the Address Card (name) prefix in the address fields of a new message? How? Thanks