Skipping the search for linked images
Hi all
My indesign document have 250 images. While I have moved the indesign document to different server. All the images are missing links now. While I am opening the document indesign looking for image links, this process is cosuming more time to open the document.
I want to just skip the searching for linked file and open the file. I will relink them afterwards.
Skipping the search for linked images while opening the indesign file is prossible?
Thanks in advance
Regards
arul
That preference can be changed. Edit>preferences>file linking (Windows) or InDesign>preferences>file linking (Mac)
Bob
Similar Messages
-
What is the Search for:- All images/All documents/all movies for in Finder
I am confused as to the purpose of Search for:- All images/documents/movies in Finder. I seem to have documents, pictures and music I have never seen or downloaded, and often photos I have actually downloaded are copied in triplicate sometimes more. I have at times got 10,000 items in my documents in Search for? My worry really is does this all take up memory on my computer and if so why is it happening and how do I stop it?
I do hope someone can explain the purpose of the Search For?
Jai309Thanks Kappy, I had thought that is what it probably was but just confused by all the items I never searched for or downloaded. Now that I know it doesn't take up any memory I shan't worry about it. When I deleted everything from the search for files all the photos in my iphoto and documents were also removed. (thankfully I always have my stuff backed up on hard drive) I guess one just shouldn't remove them? Is there a safe way to clear it out without loosing the stuff I need to keep?
Regards
Jai309 -
Then there are seven pages of empty grey squares ( where the images should be ) and scrolling down to the bottom there is a button which has `show more results` written on it, this happens every time I do an image search. I have done the same search using `internet explorer` and there is no problem finding thousands of pages of images.
Finally Ive found a solution !!!!.
Open your browser, click images and search for any image, when the images appear (probably only two pages of them) scroll right to the bottom of the page and click `Switch to basic version`. Problem solved!!!!!!. -
Question
When I do a search for an image I only have a limited number of images. There used to be a ton of pictures on my screen and an unlimited amount of pictures to look through. Is there a way of changing this back to the way it used to be???Thanks. So there's no means of knowing whether a text message has been delivered, not to mention time of delivery. Perhaps I've gone for the wrong phone. It might do a lot but seems to miss out on some basics.
-
When I search for Google images I can't open source pages
When I search for Google images I can't open the images or source pages. so cannot acces the full size images .
Somehow, you've created two topics with the same question. Not to worry, here's the link:
https://discussions.apple.com/community/desktop_computers/imac_intel -
Sharepoint 2013 - Search for link names on a single page
Hi
I am messing around with SP13 and trying to get my search result web part to only search for link names and display all results.
I have created the search source to point at the sub site. If I search for part of a link name it will list all links in one long row as a single result.
Example: One single page contains all links. Each link points to a .aspx page. The search source is pointing at this page and it can display results but only as a single result containing all links as one line of text.
Say I have 1000+ links of which 50 has names such as Link1-Item1-Basket1, Link1-Item1-Basket2 up to Link1-Item1-Basket50.
When I search for Link1-Item1 I would like my search results to display 50 results as 50 individual links.
Is this possible?Hi,
Yes, you can format the search results as you expected. But you have to create a custom display template to format your results such as extract the links from each results and display it as separate link.
Once display template created you have to map the display template to your search results web part.
Please refer to the following articles.
SharePoint 2013 Customize Display Template for Content By Search Web
Part (CSWP) Part-1
Introduction to SharePoint 2013 Display Templates
Display Template Overview
Please mark it answered, if your problem resolved. -
I was searching for an image on my Imac and when I went to Finder,File,Find and then Image, I found hundreds if not early thousand images of printers ! Amazing in one way but I didn't put them on my machine and don't really want them there.Did they come pre-loaded? Can I delete them safely? Thanks
Almost certainly, no absolutely not once you start deleting stuff like this that you think is not needed, eventually you'll trash something essential and cause yourself a lot of heartache.
There are numerous files classed as images, some will be temporary files in browser caches, others system files, others your "real" images, others files which are not really images but appear to be.
The amount of space of what I presume are essentially icons of printers will will be minimal, lets say these images are 5k in size (I guess they are much smaller?) and there are 1,000 of them, thats only 5Mb. No doubt your disk has multiple gigabytes free, eg thousands of times as much free as you'd save by deleting all of them. So you might gain back an extra 0.0001% disk space*. NOt worth the time, let alone the risk, plus then you'll get into a mindset "hmm, I dont think I can possibly need this 23byte file either I'll delete that as well etc, and then "problem......".
Where are the images stored? It may be that at some time you were searching for a new printer and these images are from that exercise (though I doubt you looked at thousands?) in which case they are in your browser cache and you can always delete that through the browser, but that space will be overwritten by other images anyway.
"If it ain't broke, don't fix it" is a motto to work by with computers.
*( or, if you really do need the (say) 5MB of disk space back because you are running out, this would only be a very temporary solution and that wont have done you any good) -
The search for a perfect design pattern
The search for a perfect design pattern
I am searching tip to upgrade a labview program used. I am looking for the best approach to make
my program more robust and scalable.Software and hardware.
Today the system consists of :
GPS, weather station, ultrasound wind sensor, echosounder and a webcamera, all connected to a computer.
The computer OS is XP pro with Labview version 2009 installed. Except for the webcamera all peripherals have serial communication interface.
The webcamera interface is ethernet.
Device Data type Interval Interface
GPS NMEA string 1 second Serial rs232
Ultrasound wind sensor NMEA string 1 second Serial rs232
Weather, temp,humid NMEA string 35 seconds Serial rs232
Echosounder NMEA string 500ms-5 seconds Serial rs232
(depending of depth)
Webcamera Jpg Snapshot on demand Ethernet
The tasks to be solved
All the data have to be stored.
All the data have to be displayed in real time.
Weather history data must be buffered to be plotted in a graph (pop-up windows).
Absolute wind speed and direction have to be calculated.
Option to send navigation data attached to email at desired time intervals.
Image snapshot at desired time intervals.
The data wich streams into the serial ports are not synchronized and vary in intervals . Would it be a good idea to put all the serial peripherals into a serial device server. Is it possible to let the server place a event in my software, to trigger reading of the data, from the the server. Or how could that be done in other ways?
The perfect design pattern
In version one of the software I use 4 parallel loops to read data at the serial ports, inside these loops the data was separated and outputted to a datasocket server. I used datasocked read in other loops to present and store data. But it did not look good, and yes it was a mess, a really rat nest. I am looking for a better design pattern.
Could some kind of producer/ consumer pattern be the way to go?
Comments and tips are wanted.
TIKNice Project! Congratulations ;-)
I am not an expert for large applications. But your project looks nice and manageable. Here my straightforward ideas:
I would build a GUI, with menu bar, pop-up graph display thing.
THen low level tasks with each one handling a RS232 device and feeding queues or fireing notifications.
Maybe handle the snapshots in an event structure on the GUI blockdiagramm.
When GUI and producer tasks are running, close the gap with a middle layer which captures the data and actualizes GUI by reference. For instance the graph-thing-dialogue triggers a "flush queue" and displays the last 200 entries of the array of data.
I often run into issues when having defined too many userevent structures. I guess i am too stupid for that. Thats why i rather use queues (when i dont want to loose data) or notifiers (data is up-to-date). Nevertheless I like a "stop-all-tasks" user event...traditionally.
My team is actually developing a large application. We are using LabVIEW classes and objects.
So have fun!
Yours
RZM -
Searching for Links in km Folder
Hi Gurus,
I tried to search for links in km folder. But the TREX didn't find them.
is it possible to configure the TREX to enable links to be found?. if
yes how does it work?
Thank youHi,
there is a custom property you have to add during index creation called
<i>IndexInternalLinks</i> and set the value to <i>true</i>
In this way the link itself is indexed, not the target.
Have a look there also:
http://help.sap.com/saphelp_nw70/helpdata/en/73/66c090acf611d5993700508b6b8b11/frameset.htm
Regards,
Sascha -
Can I search for multiple images simultaneously in Aperture?
Can I search for multiple images simultaneously in Aperture? For example, search for 'Image2.jpg, Image3.jpg, Image5.jpg' by image name, out of different folders?
dusan -- your best procedure is likely to be to type the first file name (without extension) in the search field of the Photos View, and then mark that file either with a Flag or a color label. (You might clear all Flags prior.) If you have a lot of images or a slow computer (or both ) you may have to wait a few seconds. Aperture will show "Loading ... " on the left side of the tool strip while it churns through your images.
Then hit backspace twice, and type "60". Mark the file found.
Repeat with variations.
Then go to Flagged view, or filter the whole Photos view for the color-label you used. -
Searching for multiple images across different volumes?
Hi, is there a way or an app that can search for different images across various volumes? I need to locate 200 images for an InDesign file across 3 server volumes.
Thanks,
BillIn the Finder, press command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. -
Apple Pay but skipped the part about linking iTunes Card
I setup Apple Pay and skipped the choice to link the credit card tied to my iTunes account.. I added several other cards with no problem but would now like to link the card associated with iTunes account now.. Cannot find a place on the iPhone or iTunes to do so.. Thought I'd just blow away Apple Pay and start anew but don't see a choice to do that.. Can remove individual cards but cannot default Apple Pay and start anew.. Searched various sites and have not found an answer.. Any help would be greatly appr
Based on what I have seen, the ability to add the credit card you have on iTunes is only available on initial set up. After that you will need to add it as you would any other card.
-
TS1424 The search for itunes wont work..... any ideas?
The search for itunes will not work...I can put the name in but when I click on the search symbol it will not work?
If you want to simply do a 'fresh' install (versus wiping out all of your data and doing a 'clean' install) simply boot to your Recovery partition (hold down the Command and R keys whilst booting) and when the Recovery screen appears, elect to freshly install OS X.
Don't know that will solve your problem, though... did you do the 'automatic' update or download the update as a disk image (.dmg)? I wouldn't think that would be causing your problems...
Clinton -
Hello, all.
In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)? For instance, I'm wanting to play an album with a particular track on it or I'm searching for albums that include that track. iTunes incorrectly assumes that all I'm after is that one track and then incorrectly displays the album as if there is only one ttrack on it. This is a bonkers default setting. Can I change this?Click the search magnifying glass and uncheck "Search entire library".
Type in the name of the track.
Click the album of interest to show tracks.
Select the track.
Press the X in the search box to clear the search.
Double click the track you want to start playing first.
tt2 -
Pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate
pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate
after installing windows 7 my computer only displays the LAN on my quicklaunch bar and I can even search for open WLAN networks =(Hi:
You probably need to install the wireless card driver.
Maybe you are looking for
-
Error Log during logon of RAR 5.3 Portal - please help
Hi Experts, We are unable to login into the CC portal [GRC RAR 5.3]. The login screen is appearing again and again without logging into the CC portal Below is the log file which we are getting and we understand that the product is not responding prop
-
My ipod wont synch with itunes,
I moved my itunes from my laptop to my pc using the ipod as a hard disk, and now my ipod wont synch, sometimes it starts and then just hangs and says cannot copy blah blah blah due to an unkown errer 50. When i run the diagnostics the ipod cannot be
-
No video from iPhone to Panasonic plasma TV
Got the AV composite cables from Apple to hook up to my Panasonic plasma to look at photos on iPhone. Why is there no video output on my TV?
-
How to allow user print their draft anwsers before sending it as final ?
How to allow user print their draft anwsers before sending it as final in a form central questionnaire ?
-
CO: put a standard price check on sales order (URGENT PLEASE)
Daer Gurus, I want to put a standard price check on sales order. Will you please help me? Thanks in advance, Best Regards. Juan Edited by: juan on Mar 7, 2008 1:01 PM