Skipping track after less than 1 second

I have downloaded iOS7, and I tried to delete some track from iTunes that I never listen to. Somehow, several of the songs on my iPhone have now started to skip onto the next track after less than a second of playing. I can still play the songs from iTunes on my PC, so I seem to have done something with the phone and I don't know what! I changed the settings from 'Phone' to 'Library' in the 'shared' music menu - I think that's what caused the problem, as now it seems fine having just changed it back. It's so frustrating that you can't get rid of music you don't want on your phone! There must be a way of doing it without shelling out for Match.

Do you have a circle with a red square next to some of your songs in your music app on your phone?

Similar Messages

  • Itunes yes --iphone sometimes?           skips tracks after a few seconds

    hi new here
    gota problem with listening to audiofiles in Iphone - Some folders play fine others start to play -about 2 - 5 seconds then skip to the next and the next until end of the album . However other folders from exactly the same original download play fine on Iphone , All of them play well on my intel IMac The format I think is Mpeg -1 audio files . Phoned Apple support in Uk they were not aware of problem . Any ideas?

    Welcome to the forums.
    Some folks have reported some skipping issues but nothing consistent yet. I'd certainly try resetting the phone and, if that doesn't work, a complete restore. Let us know if the problem continues after that.

  • Photoshop CC 2014 stops working after less than 30 second and shuts down

    I have installed and uninstalled Photoshop CC 2014 three or four times via Creative Cloud and each time it stops working after less than thirty seconds and shuts down the program. I then installed a an older version of Photoshop CS5.1 from a CD and it works perfect. I also have Illustrator CC 2014 and Lightroom 5 installed from Creative Cloud and both work flawlessly. What can I do to get Photoshop CC 2014 working?

    You have not provided any system information or crash logs, so we can't really know.
    http://myleniumerrors.com/working-with-your-operating-systems-tools/
    Mylenium

  • Firefox freezes when I open it after less than a minute of searching. It freezes regardless of the website I'm on. I've tried reinstalling it several times and have even tried a clean reinstall but it didn't work.

    When I open it, Firefox freezes after less than a minute of use. After waiting a few minutes, it unfreezes but then freezes again a few seconds later. This happens regardless of the website I'm on. I've tried uninstalling and reinstalling it and the problem didn't go away. I've even tried a clean reinstallation but it didn't work. This only happens on Firefox. IE and Safari work fine.

    -Plug your MacBook into a power source.
    -Click on the Apple menu and select "System Preferences".
    -Click on the "Energy Saver" icon.
    -Click on the "Options" tab.
    -Uncheck the box labeled "Automatically reduce brightness of display before display sleep"
    -At the top, next to "Settings for:", select "Battery" from the drop down menu.
    -Uncheck the box labeled "Automatically reduce brightness of display before display sleep"

  • I had many problems when downloading iOS 8 to my ipad 2. I did what Apple recomended : back up then restore.slight improvement mainly my non Apple icons became ok. But after less than a week icons changed their appearance on display.i can send a samp

    after upgrading to IOS 8  non Apple apps icons became weird  beside slowness in all apps like FB Mail games...
    as recomended by Apple I restored my Ipad. Slight improvement and mainly icons restored their look.
    but after less than a week they back to the weird look

    after upgrading to IOS 8  non Apple apps icons became weird  beside slowness in all apps like FB Mail games...
    as recomended by Apple I restored my Ipad. Slight improvement and mainly icons restored their look.
    but after less than a week they back to the weird look

  • New iPod Classic jumps to next track after a few seconds of certain songs

    I have several tracks that will not play on my new iPod Classic (80 gig) for more than a few seconds. After a few seconds, the iPod jumps to the next track. I have played the same songs on my last generation iPod with no problem and in Itunes and Windows Media player with no problem. There is clearly an issue with the new iPod hardware/software. Anyone else having this issue and found a fix.
    I have already done a complete reinstall of the new iTunes and restored my iPod to factory settings and installed the latest iPod software.

    Actually - I just noticed your solution to the issue. I tried PT's solution, which I mention above and it didn't work. I haven't tried your solution - however, I have considered it. Here's the problem with it though. The first problem is having to sift through 5400+ songs on my ipod to know which ones are having the issue and which ones need to be burned. The second issues is that the songs are compressed mp3's. Converting the compressed mp3's into a cd and reimporting it back into mp3 further degrades the file - you're essentially making an mp3 from an mp3. It actually makes no sense to do this unless you've purchased your music from an online store and therefore don't have the original cd's. Since all of my music is from my cd collection, it would be simpler to re-import the songs from the cds. But, it's really the first issue I mentioned that is the kicker - I don't want to go through my entire music collection to find out which ones are having the problem. The problem isn't the tracks as far as I am concerned - I still have my previous generation iPod and the same tracks play fine. The same tracks play fine in iTunes and Windows Media Player. The problem is the new iPod. If Apple can't resolve the issue through an iPod/iTunes update in the next week or so, I'll just return the iPod and stick with my old one.
    Message was edited by: Oluyinka Oyesiku

  • Offline Songs Skipping/Jumping After Around 10 Seconds

    So I'm habing a proplem where some albums that I download do not work properly. I try play songs and after about 10 seconds it will automatically go to the next song and this sometimes happens with multiple songs in a row. It only happens on some of my albums though. Even after i reboot my phone it continues to happen. The only way I can figure out how to fix it is if I undownload the album and then remove it from my library. Then I add to my library again and redownload it. Does anyone know why this keeps happening?

    Hello there!
    Have you tried a clean reinstallation?
    This helps to fix almost all issues found on the Android client.
    Just follow these steps to clean reinstall Spotify:
    From the home screen, tap Settings > Apps.
    Find Spotify in your list of apps.
    If you're able to, tap Clear Data and Clear Cache.
    Tap Uninstall to remove the app.
    Turn your device off and then back on.
    Open Google Play then search for and install the Spotify Music app.
    Keep in mind that a clean reinstall will delete all data stored by Spotify, so you will need to sync your offline tracks again.
    Hope this helps! ♫

  • Skips to next track after a few seconds

    when i have my ipod on shuffle it skips some songs after playing the first few seconds, please help!!!!!!

    Remember the skipped songs, go into iTunes, highlight these songs, right-click, choose "convert to AAC (or MP3..whatever you've set). After converting delete the older songs, then sync your pod again and you're done!
    Regards, Chris
    P.S.: The Problem is, that iPod nano has problems to playback some (unknown) encoded MP3 Tracks. So when you import your Songs always with iTunes itself, then iPod will play all songs perfectly (no matter if you convert them to AAC or MP3, which you can set in preferences in iTunes. You just have to import songs with iTunes).

  • Ipod skipping songs after a few seconds

    I have been having problems with playing certain songs on my new 80GB ipod classic (all ripped from CDs, not purchased or downloaded).
    The songs will skip to the next song after anything from right at the beginning of the song to 30 seconds in. If I go back, I can fast forward past the point it skips, and it will play to the end.
    I have already tried deleting the songs from my library and re-importing, restoring my ipod with the latest software and checking that the stop time on the song is correct. Does anyone have any other suggestions for me?
    Thanks

    I have a similar issue, the only difference being that when I fast forward it will not continue to play, only again, skip to the next song.
    After some research I have found that the only thing that seems to work for me is to convert my files to MP3 using the "convert to MP3" function found in iTunes. All my songs are already in MP3, but the reason this works is due to the encoding. If the encoding is unknown, it seems more often than not my iPod will skip those tracks. When you convert it to mp3 using iTunes it changes the encoding to some kind of iTunes encoding.
    This makes me VERY angry. There is no way I have found to sort the items by their encoding as to convert only the problematic ones. Also, when you convert it changes the bit rate to read what ever your rip settigs are. This ***** because I plan on reripping some of my CDs that I ripped years ago at a low bit rate. If I convert to MP3 I cannot search my library to see which ones were ripped at the lower rate.
    It also creates a duplicate of the audio file, which means I will not have enough space on my hard drive to compensate for over 12000 duplicated at a higher or equivilant bit rate.

  • My nano died after less than 2 months?

    After being so happy with my iPod nano for almost 2 months, and being at this forum for a week, I never thought many of the things here would happen to my nano... Anyway, here is the story:
    Last night my iPod nano was working perfectly. I had listened to it right before I went to bed. Like usually, it was in it's Green Xtreme Mac Tuffwrap with the screen protector. So anyway, when I was getting tired, I shut the nano off, and put it up on one of my desk shelves (the one reserved for the iPod nano.) Anyway, today, when I came home from school, and went to listen to some music, my nano was dead. It didn't do anything. It just wouldn't turn on. Last night the battery power was about half empty (I'm a pessimist) when I shut it off. Anyway, I figured that I should just plug it in to the computer. Maybe it had someone turned itself on over night....
    Anyway, as I say this, my nano is pluged into my iMac G5. It is just sitting there. The computer does not detect it, and the screen is still blank. The nano is not in it's case, but is covered with a thin plastic Crystal Shield (which ***** BTW so don't buy it). It's just lying there dead. I would try to restore it, but the computer doesn't even detect it so what is the point.
    I was going to install iPod linux and void the warranty, but I never actually got around to it. The warranty is intact, but I don't want to send it to apple yet. When my Mom's nano broke it took 2 weeks for her to get the box, ship it to apple, and get her new iPod. Right now is there anything I can do to get this nano alive? Please... I have not misued it or anything. It's been in a case with a screen protector since day one (minus charging), and I have not dropped it or anything. Is there ANYTHING I can do?
    Anyway, I have tried to reset it but it is uselss.
    Here is a picture of the dead nano plugged into the computer. The white spots are from the stupid Crystal Shield that's no "Crystal Clear."
    http://img467.imageshack.us/img467/8362/pc0800019rx.jpg
    Here is my nano in its pride and joy with some of my favourite objects. It is displaying a picture of my cat.
    http://img420.imageshack.us/img420/3304/pc0300096dv.jpg

    I'm not complaining about the airbubbles. When I took the shield thing off the plastic it wasn't even translucent. I could barely see through it. My friend also got them and his were the same. But here did a better job putting his on them me lol and his was airbubble free. But, his nano still looked terrible from it. Do yourself a favour and order one. It's like $5, no big deal. If you can put it on good, show me some pics. Then I will believe this product is worth more than the $5 I paid for it.

  • Video preview skipping/freezing after a few seconds

    Hi All,
    I am a new user of Premiere Pro and am having an anoying issue with video stuttering/skipping in the preview windows when editing.
    I am trying to edit GoPro footage shot from a Hero 3 Black in 1080p 60fps. The video preview is at 1/2 res and it will play smoothly for about 3 seconds, then start skipping. If I pause the preview for a few seconds and restart, it catches up and plays smooth for 3 more seconds or so, then skips again.
    I have tried to convert the raw gopro footage to a premier preset (MPEG-2) using brosoft video converter and have the same problem.
    I thought it may be due to hardware limitations with my older PC, but I have upgraded the slowest parts of the system with no luck (the rest of the PC is running like lightening now though).
    Here is the current setup:
    OS - Windows 7 Ultimate 64 Bit
    CPU - AMD Phenom X4 9750 - 2.4Ghz Quad core - 64bit - specs: http://www.cpu-world.com/CPUs/K10/AMD-Phenom%20X4%209750%20-%20HD9750XAJ4BGH%20(HD9750XAGH BOX).html
    Ram - 8.00 GB Dual-Channel DDR2 @ 400MHz
    Motherboard - ASUSTeK Computer INC. M2N68-VM (AM2) (sata II, not sata III compatable)
    Graphics - 1535MB GeForce GTX 580 (EVGA)
    HDs -
    New 256GB Samsung MZ-7PD256 840 Pro Series Solid State Drive (SATA) - System drive
    932GB Western Digital WDC WD10EADS-00M2B0 ATA Device (SATA) - Video storage
    1863GB Western Digital WDC WD20EARX-00PASB0 ATA Device (SATA) - General storage
    Is there anything else I should be trying here or is this just a limitation of HD video??? Surely I should be able to preview what I am trying to edit without pausing the footage every 3 seconds? =(.

    I have a few other things running at the same time, but I disable network, Antivirus, Media Server apps etc etc (anything thats hungry).
    When play skipps I see RAM at about 50-60% useage, CPU below 50 % on all 4 cores. I have notised that the HDD spikes up to 100% at times but then drops off. I have tried running everything off my SSD and seems to make no difference.
    When I render a clip, it play perfectly....so seems to just be the preview of the GoPro clips thats causing issues. I will have a play with converting the footage to something smaller/lower quallity, but that defeats the purpose of shooting HD footage.
    Another thing I have been notising is that the rendered final clip is rather blury/has some issues with fast moving footage. Any ideas?
    http://youtu.be/l-js5KpDq_4

  • Monitor dimming after less than a minute really starting to annoy me...

    Hey!
    This is my first post on here... and I'm posting because I've just started getting really fed up with how the display slightly dims after a minute or less of me not typing or moving the cursor... If I need a page open to read, I have to constantly touch the trackpad in order for the light to come on again so I can see what I'm reading...
    I have looked ALL OVER the settings, and the only thing I can find to change is how long it takes for the computer to go into sleep mode... and there's is another thing where you can check it to have the display fade before going to sleep.... but even if I uncheck this, then instead of the display fading, it goes completely black after a minute or less...
    I just want to adjust the amount of time it takes for the display to dim... Please! Is anyone else annoyed with this? I can't even watch a youtube video without being interrupted about 4 times by the screen fading...
    Thank you to anyone that can help me!
    Message was edited by: Matthew McGuire

    -Plug your MacBook into a power source.
    -Click on the Apple menu and select "System Preferences".
    -Click on the "Energy Saver" icon.
    -Click on the "Options" tab.
    -Uncheck the box labeled "Automatically reduce brightness of display before display sleep"
    -At the top, next to "Settings for:", select "Battery" from the drop down menu.
    -Uncheck the box labeled "Automatically reduce brightness of display before display sleep"

  • Why was my free trial disabled after less than a day

    Hi,
    I set up an Azure trial yesterday afternoon, roughly 4pm GMT. I came into the office this morning, and found an e-mail from about 3:30am GMT, telling me my trial had been disabled due to reaching it's spending limits?
    I did set up a VM yesterday, but didn't use it after it was provisioned, and I see I have 31 days left to use my current credit of £125 GBP.
    Why would my account be disabled so quickly. How can I evaluate something in such a short period of time. Is there some way to contact Microsoft directly about this?
    Many thanks, Eds

    Hi Eds19891,
    You can contact Azure support:
    http://azure.microsoft.com/en-gb/support/options/
    Best regards,
    Please remember to mark the replies as helpful if they help, or as answers if they answer your question. Please also unmark the answers if they provide no help.
    Zach Roberts
    Independent Microsoft Community Support Advisor
    Disclaimer: I don't work for Microsoft. Any advice given is my own and does not represent Microsoft.
    Follow me on Twitter:
    @WindowsZach

  • Left side of 27" iMac going dim after less than 2 yrs...aaarrrggg

    left side is flickering and now it just stays dim......I have enjoyed the imac and like it bright......hopefully this is an issue than should be fixed due to so many people complaining about it...I do not have $500 to get it fixed every 2 yrs...anyone else having this issue?

    thanks I have an appointment for this thursday so we will see what happens...hopefully it will not bust my wallet...I wish I had known I had a year to get apple care..my bad for not looking close enough.....as I am typing the whole left side went way dark......crossing fingers
    thanks again
    Chuck

  • Brand new hp laserjet p1102 and new toner cartridge out of toner after less than 100 prints ! ! ! !

    Hi ,
    I have just bought a brand new HP laserjet p1102 and a brand new toner cartridge, and within litterally 50 sheets being printed it says I am out of toner.
    Please tell me what I must do to get this working again, because clearly I am not out of toner.
    Thanks
    Stephen

    Hello , Welcome to the HP Community.  I'd like to help you with the installation and printing issues you are having with your HP Laserjet Pro M201dw, on your Windows 8.1 operating system. I can certainly understand your frustration, it seems like you have attempted the install multiple times. First, I'd recommend running the Print and Scan Doctor, to see if it can resolve any errors in the software without having to re-install. If it does prompt you to re-install your software, I would suggest uninstalling all M201dw software from the Programs section of your control panel. Once that's done, do a cleanboot of your computer. You can find instructions to complete the cleanboot here: How to perform a clean boot in Windows Note: This will turn off all non-essential startup items, so if it's another program on your computer that is causing the installation to lag, it should resolve the install issue. Rather than installing from the download or the CD that came with the printer, I'd suggest downloading and running the HP Printer Install Wizard. Please respond and let me know if this helped to resolve the issue!Good luck

Maybe you are looking for

  • How do I add footnotes/endnotes in Pages for iPad 2?

    Hi everyone. Like many people I was super excited to be able to use my iPad 2 as a word processor with the Pages app. I have a macbook black from 2007 and it is extremely heavy to carry around everyone. I'm a graduate student so mobility for me is ke

  • Classpath error while building the project.

    Hi I have created an application in which on clicking the button on one view , next view opens and data is displayed in the tables. This data i am giving as static, and for that i have created a java file. this java file is located in the subfolder i

  • Hi everyone, how can I download whatsapp for iPad2?

    I would like to download whatsapp on iPad2, how can I do it?

  • Profiling Problem & Web Authentication Proxy

    Dear All, I am facing problem with profiling of workstation over wireless network as ISE is marking these workstations as 'Unknown'. Whereas if I connect same workstation using wired connection then it gets profiled in the right category. Profiling f

  • I'm trying to figure out how to mass edit files with a watermark...

    And I can't figure out how! I know Lightroom has a feature, but the freedom with that one (fonts/colors/size) sucks. Can anyone help me out? I have 900 images to stick a watermark on, and I really need to know how to do it in Photoshop CS4 Thanks!