Skippings songs on 7th generation iPod

Hi there.  Recently purchased a 7th generation iPod Nano along with a dock.  While playing on the dock, songs would skip periodically.  I exchanged the iPod & dock but songs are still continuing to skip.  When I play the songs on my computer, there is no skipping. 

No, there is no hold button or function on the 7th gen.
(Resetting is done by pressing the wake/sleep and home button for 6 seconds).

Similar Messages

  • Recently, iTunes upgraded.  My 7th generation iPod is now not recognized and I cannot sync.  The troubleshooting talks  about being visible in Windows (iPod is invisible)  No other options and nothing about windows 8

    Recently, iTunes upgraded.  My 7th generation iPod is now not recognized and I cannot sync.  The troubleshooting talks  about being visible in Windows (iPod is invisible)  No other options and nothing about windows 8

    I have had similar issues with mine, happens mainly if I transfer songs and then decide to disconnect my iPod to listen to them with my IEMs (I use Interenet Explorer in my case and it is not neccessarely up when this happens, so I seriously doubt it is an issue conencted to the web browser). I have no patience for this so my trick is I try to eject it from iTunes, if that does not work, then I bring Windows explorer up, right mouse click on the iPod mounted drive and select Eject. It gives me the same warning but there is a third button selection called Continue. When I choose that it just disconnets the drive anyway and the iPod is finally disconnected. It seems to work each and every time I do it so this solution is fine for me. Would be intersting to see what the real root cause of this is because I started getting this problem with the newer iTunes 11.

  • Does anyone know why my music won't play on my 7th generation iPod nano? I tried resetting it already and that didn't work. Can someone please help?

    Does anyone know why my music wont play on my 7th generation iPod nano? I've tried resetting it already but that didnt work. Can someone please help.

    I would to a Restore.  Select the iPod in iTunes.  Go to the Summary tab for the iPod.  There is a button there to do a Restore.  This will erase the iPod, re-install its software, and set it to default settings.  After Restore complete, try playing songs on the iPod again.
    If THAT does not fix the problem, and it's not bad headphones (since you also tried the "speaker"), there is probably a hardware problem on the iPod.  All 7th gen nanos are still under warranty.  If you have an Apple Store nearby, you should take it to the store's Genius Bar.  To minimize waiting, you can make a reservation on store's web page.
    http://www.apple.com/retail/

  • I'm confused about 6th and 7th generation ipod classic

    what is the difference between the 6th and 7th generation ipod classic??

    Any song purchased from any of the five computers you've authorized to play content from the iTunes music store will play on all of the authorized machines. You will need to copy the actual song files yourself, as you probably won't be able to redownload the songs from the music store without purchasing them again. Some people have gotten previously purchased music redownloaded for free; contacting the Music Store customer service is necessary for this.
    (11376)

  • Does a 7th generation ipod nano work with windows 8?

    we bought a new HP laptop with Windows 8 and are having difficulties wtih our 7th generation Ipod nano's not being recognized by the computer. Is Windows 8 compatible with the Ipod nano 7th generation?

    Hello LCREW,
    The article linked below provides some useful troubleshooting steps that can help get your iPod to appear in iTunes.
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Cheers,
    Allen

  • Unable to sync my replacement 7th generation Ipod Nano. Previous nano had no issue. Both Win7 and Win8 Pc's fail sync. I am an admin on both machines.

    I don't know why my new 7th Generation Ipod fails sync diags on both Win7 and Win8 computers. I am an admin on both machines. The computer sees the device, but ITunes does not, but yet I can eject the ipod.

    Hello Dee Nano.
    It sounds like your iPod nano is recognized by your PCs, but it isn’t recognized by iTunes. Try the suggestions in the article linked below, they will resolve most issues like this.
    iPod: Appears in Windows but not in iTunes
    Cheers!
    -Jason

  • 7th Generation iPod Nano connection issue

    My Dell Inspiron N7110 does not recognize my brand new 7th generation iPod Nano even when I use a USB 2.0 or 3.0 port.

    Gee...I'm answering my own posts.  But...this is the deal.  Apparently, my iPOD Nano froze...and one thing I did not do was reset it.  I did that, and by IPOD was suddenly recognized by my computer....and is now happily charging, etc.   So, case solved.

  • 7th generation ipod nano stops tracking my runs after a minute

    7th Generation Ipod Nano: when using the fitness icon and running, it pauses every minute or so and i have to physically hit resume to start again and the mileage is off. Anyone know how to fix? I can't get it to calibrate because it won't make it through a whole work out to do that.

    Is an earphone or Bluetooth headphone connected to the nano?
    If its an earphone you can check the earpod jack on the iPod to see if there is any lint in it.
    If there is no earphone or Bluetooth headphones connected, the iPod thinks play was hit by accident and pauses it to conserve battery.

  • 7th generation ipod nano only displaying white screen with blue horizontal lines

    Hi,
    My 7th generation ipod nano is now only displaying a white screen with blue horizontal lines along the bottom. It still plays music and is recognised in itunes with I connect it to my PC.
    I have reset is and restored it and it is charged.
    Please advise.
    Thanks,
    Jess

    Hi jkjuarez2012,
    Thank you for visiting Apple Support Communities.
    It sounds like your iPod nano is only showing the Apple logo with a white background, and you've tried many good steps including resetting and restoring the device. I know I'd miss my music in this situation.
    Make sure that you followed the steps in this article when restoring your iPod:
    Restoring iPod to factory settings - Apple Support
    If the issue continues after restoring, your iPod nano may need to be serviced. You can use this link to find out more about iPod service:
    If the issue is still not resolved, please read this information on servicing your iPod.
    From:
    iPod nano (7th generation): Hardware troubleshooting - Apple Support
    Best Regards,
    Jeremy

  • 7th generation iPod nano flashes apple logo with a white screen and won't play.  What is wrong with it?

    I have a 7th Generation iPod Nano that started flashing the Apple logo with a white background.  I have tried Diagnostics, restoring the iPod and even resetting it.  At one point it was in a Restore Loop.  I'm thinking maybe it has a virus but reading further says that I may be missing one of the drivers.  Is there any way to fix it without taking into a tech?? Please help...miss my music!!

    Hi jkjuarez2012,
    Thank you for visiting Apple Support Communities.
    It sounds like your iPod nano is only showing the Apple logo with a white background, and you've tried many good steps including resetting and restoring the device. I know I'd miss my music in this situation.
    Make sure that you followed the steps in this article when restoring your iPod:
    Restoring iPod to factory settings - Apple Support
    If the issue continues after restoring, your iPod nano may need to be serviced. You can use this link to find out more about iPod service:
    If the issue is still not resolved, please read this information on servicing your iPod.
    From:
    iPod nano (7th generation): Hardware troubleshooting - Apple Support
    Best Regards,
    Jeremy

  • Why does the 7th generation ipod nano not have games

    I want to know why the 7th generation ipod nano does not come with:
    1- games
    2- voice memo

    1. The iPod Nano runs the Pixi operating system, not iOS and has too small a screen for displaying the game and controlling it.
    2. Plug in a headset with a microphone: http://manuals.info.apple.com/en_US/ipod_nano_user_guide.pdf page 46.
    3. Ignore the answer from AppleRulesTheWorld

  • I have a 5th generation IPod (Nano?) that I have registered to my ITunes Account.  Recently bought my daughter a 7th generation IPod Nano for her B-Day and Am trying to sync it to my ITunes acct. Message appears that says it does not recognize new Ipod.

    I have a 5th generation IPod Nano that I have registered to my ITunes account.  I recently bought my daughter a 7th generation IPod Nano and have attempted to sync this new IPod to my ITunes account.  A message continues to appear saying that it does not recognize the (new) device...   Any suggestions ??

    How to use your iPod to move your music to a new computer

  • HT4059 I have a 7th Generation iPod Nano and cannot get audiobooks to sync with it. The manual says this is a valid feature but I can't get it to work. Any suggestions?

    I am trying to sync an audiobook from iTunes to a 7th Generation iPod Nano. The manual says audiobooks can be synced to this device by going to iTunes, selecting the Book button and selecting sync audiobooks but when I select the Book button I do not see any syncing options to select.  What am I doing wrong?

    Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
    Above from:
    http://support.apple.com/kb/TS3694#error1611
    Note it could be a hardware problem

  • Does the 7th generation iPod nano have a built in speaker?

    does the 7th generation iPod nano have a built in speaker?  i have looked through the site and i have not found any results on this and i was just curious if anyone else knows the answer here.

    Ya I know, but when i went to the ipod nano page on wikipedia, it is different from the ipod page.
    I really am getting confused...
    7
    16 GB
    Slate
    Silver
    Purple
    Pink
    Yellow
    Green
    Blue
    (Product) Red Special Edition[note 1]
    USB
    October 2012
    Mac: 10.6.8
    Windows: XP 
    iTunes 10.7 or later
    Audio: 30
    Video: 3.5[42]
    240x432
    202 ppi
    76.5 mm
    39.6 mm
    5.4 mm
    31 g
    (1.1 oz)
    New, larger 2.5 inch Multi-Touch screen. Unibody now made of anodized aluminium. Also, with larger screen, supports video playback.
    From: http://en.wikipedia.org/wiki/Ipod_nano
    seventh
    16 GB
    USB
    12 September 2012
    Mac: 10.6
    Win: XP
    audio: 30
    video: 3.5
    Revert to tall form factor with larger 2.5" multi-touch screen. Clip removed. Video playback and speakers restored, and Bluetooth added.
    From: http://en.wikipedia.org/wiki/Ipod

  • The center button on my 7th generation ipod nano no longer works

    I have had my 7th generation ipod nano for about 6 months. It only stays plugged into my vehicle. 3 days ago, the center button quit working. It still plays music and the touch screen works, as well at the top on/off button. What can I do to fix this?

    if it is warranty i would visit a apple retail store, be sure to set an appointment if you vist the store.

Maybe you are looking for

  • Payment block R , not stopping while payment to Vendor

    While making MIRO, invoice has been blocked with 'R', but without releasing block system is accepting payment. What might be the reason.

  • [JS][CS3] Insertion Point

    HI All I need to get a hold of an insertion point between 2 characters and add some negative kerning to the characters either side. I have tried: myInsertion = myPara.characters[-3].insertionPoints; and many variations of that line, but with no joy.

  • How to refer to a Label on the Stage from within a Symbol

    Hi Edgefriends, I'm working on a project in Edge Animate, however I have about zero experience with JavaScript and I can't seem to get this working without it so I hope someone can help me to get this done. Below you see the code I need help with. It

  • Make table of contents links keep current zoom level, not zoom out to full page

    When Indesign creates tables of contents, they automatically link to the paragraphs the links point to, so that in an interactive PDF, clicks and prods take the user to that page. Great. What's not so great is, that the hyperlinks / cross-references

  • Accesing an EJB from an Applet

    Hello, I've published my first EJB to Oracle 8i, and when I use a standalone java application as a client I have no problems. But when I try to access with an Applet, the Java console shows: javax.naming.NotContextException: retvalentin09.cedetel.tel