Skullcandy earbuds with "MIC3" No Mic Sound

I have Iphone 4. The earbuds are Skullcandy ones with "over the ear" hooks. Three button in line control. Middle button will answer phone calls but the caller can't hear me because apparently the in line mic isn't hearing me. I can hear the caller fine through the earbuds, though. Any suggestions?

Similar Messages

Problems with Shure 8900w mic (sound way to low)

Hey. I just got the Shure 8900w microphone. Garage band has it selected and everything as the input device, and the input level is as high as possible.
Whenever I record using the microphone, it record very quiet unless I am speaking with the microphone right in my face, and then it's still not as loud as it should be.
The bars showing audio flucuation in garageband remain pretty much straight lines, except for very small raised sections.
The built in mic is fine: in the sound->input menu in system preferences, If I move the input level for the built in mic to the halfway point, and clap loudly once with my hands five feet away from the mic, the meter that shows how loud the sound is jumps up to the second to last bar.
If I do the same thing with the Shure 8900, it doesnt go up at all. the first bar fills up if i clap right in front of the mic.
How can I fix this? Please help me, and thanks in advance.

If you can scare up a few dollars more, then I have a solution for you.
Plug your mic into this small mixing console, and then the console into your Mac's Line-In with this cable. That totals about $51.
On top of that, for the sake of your listeners, get a pop Filter as well.
~~HangTime V1.9.9.9.1 [Will Compute for Food] B-)>

I have had a iPod touch 4 on iOS 5.0.1 32gb and whenever I plug my apple earbuds with remote and mic the /- buttons don't work

I don't know why but the remote volume buttons wont work on my iPod. When I got it it was on running on 4.3.4 an it worked perfect but no it wont. Please help

Try the standard fixes to rule out a sftware problem:
- Reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If still a problem then an appointment at the Genius Bar of an Apple store is in order.

Ipod nano 6th gen damages headphones with an inline mic?

I have been using skullcandy earbuds with inline mic/ remote with an iPod nano 6th gen. The problem is that songs will skip automatically, voice over comes on inadvertantly, and volume will go up and down by itself. at first i assumed it was the headphones since it seemed that a button on the inline remote was sticking and causing all of these inadvertant problems. but, i got brand new set of earbuds, different cheaper brand with inline remote (iLuv), and first tested them on my iPhone. they worked perfectly on the iPhone for several weeks. I then started using them on my iPod nano, and a few days later noticed the same thing as before - inadvertant skipping, voice over, etc. When i tried to use the same earbuds again, but on my iPhone, the problem persisted indicating that the headphones were now damaged. That is when i realized it must be the iPod somehow short circuiting the earbuds, since it happened on two separate sets of earbuds.
Has anyone experienced this problem before when using earbuds with an inline remote / mic? is it possible that the earbuds are not compatible with the iPod? i am worried that this is a hardware issue and cannot be fixed by software update....

Did you try doing a Reset on the iPod (which restarts the iPod)?
http://support.apple.com/kb/ht1320
If that does not help, you may want to also try doing a Restore of the iPod in iTunes.
http://support.apple.com/kb/ht1339

Can i use earbuds with mic to make recordings on ipad

HI am trying to use my Klispch s4i earbuds with mic to make audio recordings on my ipad. i know i will have to buy a sound recorder program from the app store. Thanks

I have a zagg smartbuds that have a microphone and it records. Try testing. The Dragon app is free, it's a 'voice to text' app. Download it and try with your earbuds and see if ti works. If that app works then they other should too I would think.

Earbuds with Mic and Skip Functions not working after IOS 6.0.1 update?

I have earbuds with a mic and skip buttons functions and noticed that mic and the skip music functions stop working after updating to IOS 6.0.1. Now when I talk on the phone the mic on iPhone itself is working and not the mic on my earbuds. Also when playing music he skip functions has stop working. Has anyone noticed these problems?

Phone restart > if that doesn't work then do a reset of the settings. Full restore would be the last option.

Will Skullcandy earbud controls work with an Iphone 5S

I lost my Apple earpods, and I was wondering if I buy skullcandy earbuds, will I be able to use their earbud controls to control my phone as I would with a pair of Apple earpods? When I used to have a samsung the controls only worked with samsung earbuds, is it the same case here?

I can't speak for the Deido but this case works great with it and is really nice leather.
http://www.splashproducts.com/product_p/spl-iph5-mhk-ii.htm

Is the iPod Touch 2nd Gen compatible with current iPhone earbuds with mic?

I have a friend that wants to talk to me on Skype with an iPod touch 2nd gen, but the earbuds don't have a microphone to talk into.
Is the iPhone earbuds with mic compatible with the Touch Gen 2? Thanks.

I found an Apple brand iPhone stereo headset (with mic) on eBay, but when I try it with my iPod Touch 2G on apps like Skype or QuickVoice, I get a message saying that there is no microphone attached. Has anyone else encountered this problem?

Has anyone found any glow-in-the-dark earbuds (with mic) for the iPhone? I'm looking for some that glow or light up so they can be seen when I walk in the dark.

Has anyone found any glow-in-the-dark earbuds (with mic) for the iPhone? I'm looking for some that glow or light up so they can be seen when I walk in the dark.

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

Commands for apple earbuds with mic

Hi, I have a pair of apple earbuds with a mic that came with my iphone and since you can press the mic i don't know all the commands. Can someone tell me all the commands?
Thanks in advance,
aznD

Refer page 24
http://manuals.info.apple.com/en/iphoneuserguide.pdf

Mic is too sensitive, calls constantly cut out. People tell me y loud, and it sounds like I'm in a tunnel. Any background noise, and call is completely cutting out. This occurs all the time, but more so using earphones with in cord mic.

I have iphone5 ios6 and the Mic is too sensitive, and calls constantly cut in and out. People tell me there is loud background noise and it sounds like I'm in a wind tunnel. Any background noise, and call completely cuts in and out and sounds as if call is dropping. This occurs all the time, but more noticeable while using earphones with in cord mic. I never had this problem with my old iphone4. Has anyone experienced this, and is there a setting that can correct this problem?

Same problem for me. So bad in fact that I can't really use my headphones for calls. I have tried it with several sets of headphones. My primary are the Bang and Olufsen headphones which were great with the previous iphone 4 and 3.
Apple please address this issue.

Apple Earbuds with remote mic/volume functions not working in Windows

So this is somewhat of a strange one. My new Macbook Pro early 2011 with a fresh copy of Windows 7 Pro with all latest updates (including the recent firmware and bootcamp releases) doesn't seem to see my Apple Earbuds with remote as a microphone and the volume commands from the earbuds do nothing. However this works fine under OSX and used to work with my mid 2009 MBP. Anyone else seeing this and does anyone know a way to solve this problem?

I'm having the same problem here. Did you find a solution?

Is there an adapter that lets you use iPhone earbuds with an iMac?

I have big heavy uncomfortable headphones with a mic that I use for gaming on my iMac.
I'd rather use the earbuds from my iPhone.
Is there an adapter that lets you use iPhone earbuds with an iMac?

I got the splitter, (see link below), but the mic does not seem to work. Apparently, there's a difference between a mic port and a line-in port. Mic ports are powered by the computer, line-in ports are not. They expect a powered signal to come from the input device. The iMac has a line-in port.
I downloaded an app called Line-in that is supposed to give back the ability to use unpowered mics with Macs that lost the abiliy after a system update. It did not work for me. I guess my iMac never had the ability to use unpowered mics.
So I ordered the USB Stereo Audio Adapter below. It's basically a sound card that plugs into a USB port and will work with an unpowered mic. It has not arrived yet. I'll let you know how it goes.
GTMax Headset Adapter: Smartphone Headset to PC Adapter - Use a 3.5mm iPhone/Smartphone Headset With Your PC, Converts 3.5mm Plug to Dual Mic/Audio 3.5mm, for Skype/VOIP
http://www.amazon.com/gp/product/B0046FMRGA/ref=oh_details_o01_s00_i00
Syba SD-CM-UAUD USB Stereo Audio Adapter, C-Media Chipset, RoHS
http://www.amazon.com/gp/product/B001MSS6CS/ref=oh_details_o00_s00_i00

ITunes 10.1 and Earbuds with Remote - Can't pause or skip songs on MBP

Since upgrading to Mac OS X 10.6.5 and iTunes 10.1 today, I notice that I can't pause and skip songs with my iPhone earbuds when they're plugged into the Mac. I have a [latest gen 2.4 GHz] 13" MacBook Pro and I could have sworn this was a feature that worked prior to the upgrade. I know it works just fine on my 27" iMac at home, so it's possible that I might be confusing the two systems. All I am able to change is the volume up and down.
Does anyone else have a 13" MBP and a pair of earbuds with the mic? Are you able to click once and pause iTunes and click twice to skip to the next song? I'm so used to doing this on my phone and iMac that I wonder if I am just taking it for granted and maybe the 13" MBP never supported this.
Thanks for any help or tips you can provide.

I've heard others with this same problem in the past. It sounds like a manufacturing problem with the headphones themselves causing the buttons to not work.

Is it possible to link an Audigy2 card with external haedphone & mic connections on my ca

Is it possible to link an Audigy2 card with external haedphone & mic connections on my case as buying an external dri've bay is a bit expensi've, but i really want to make the most of my card. I currently use a usb headset and the sound is a bit naff as i have no control over bass & treble. The only advantage of this is convinience.

longi wrote:
. Is it possible to link an Audigy2 card with external haedphone & mic connections on my case as buying an external dri've bay is a bit expensi've, but i really want to make the most of my card. I currently use a usb headset and the sound is a bit naff as 2. i have no control over bass & treble. The only advantage of this is convinience.
. There is no analog I/O pins available on Audigy 2. Only way to get it working the way you want is to split those I/Os found from back of the card. Here is a project running solving this matter, so you may want to follow it's progress.
There are also couple threads talking 'bout this matter of yours.
2. You can control treble and bass from software you're using or if you play games (only) then from
- Creative Surround Mixer
- CTPanel (can be found on driver installations)
- Control Panel: Sounds And Multimedia properties: Audio tab --> Play Control : Volume slider: Advenced
All these above affects sound Globally.
.jtpMessage Edited by jutapa on 09-7-2005 09:57 PM

Skullcandy earbuds with "MIC3" No Mic Sound

Similar Messages

Maybe you are looking for