Sky HD box keeps losing signal but is fixed with a power cycle

Hi all, I'm having issues with my Sky HD box. Every day (recently), I'm having to powercycle the box to get a signal.After the power recovery the signal is fine, so I think the dish is fine. It's seems the the box is losing signal while it's on stand by mode. Any ideas? Thanks in advance Jason

I had this problem too but in the end the solution was for Sky to come out and replace the dish and LNBs, since when the signal has been perfect. I would check what signal strength you are getting - I believe it's in the settings menu.

Similar Messages

Airport Keeps Losing Signal!!!

Hi every body!
I'm using a powerbook and a Ibook and i've just installed Apple remote desktop 2.2 but when i'm using it to manage one of my computer.....the airport of the two PWB an IB keep losing signal and i have to reconect it for lots of times.
Does anyone know what happen with it?If you're having the same problem,please share it.....any help would be appreciate.
ibook G4 8oomhz 640mb Mac OS X (10.4.3)

First try a channel change on the base station to see if you are experiencing interference.

Got my iPhone 4S a few days ago. On orange EE in uk. The phone keeps losing signal (no service) never had this problem before with other makes of phone. Please help, thank you.

Please help. My iPhone 4S keeps losing signal (no service) I am with EE orange uk. The phone is only Agee days old. Never had this issue with previous phones.

Same problem!!!
There are many ways to fix it
First you must change the USB cable... Or download new version iTunes bro...
Or if your laptop says " the usb NOT recognize " try to pull up the laptop charger,
It's work for my device, try this bro !!
Im sorry my english is bad!!!

Why does my mini keep losing signal

I have a G4 mac mini and have it connected to my TV, however it keeps losing signal does anybody why?

can you try to fix the problem into a corner maybe, by checking if you can connect to another TV or Monitor, or by exchanging the cable?

Sky+ HD box keeps crashing

Hello everyone, For the last couple of months now my 4 yr old Sky+ HD box keeps crashing. It will easier freeze on the TV guide or freeze on a channel, making it impossible to switch over to a different channel. The only solution I have to this is to switch off and then switch on again. The other issue that I am experiencing is that my series link and reminders regularly fail. Again, the only solution is to switch off and on again. A combination of these errors is happening every 3-4 days. can anyone offer any solutions. I am loathe to purchase a replacement box plus delivery at almost £200 when these are being given away for nothing to new customers. Many thanks

But of an update following my earlier post. A planner rebuild along with deleting my deleted programs is only a temporary fix, as is power off and on. The problems seem to come back within a few days. If anything, the issue seems to be getting worse. When it froze over the weekend it took 30 minutes to be able to get a picture back on my screen after switching the sky box back on. I have now tried a forced software update over the weekend and am hoping that it resolves the problem wore long term.
There is a notice on the help and support website from Sky which seems to be related to the problems many of us are experiencing, although not sure if over the same period. It says a fix should be available this week so it will be interesting to see what that is and whether that has been the root of everyone's problems.

Osx10.6 keeps freezing how can I fix without turning power off?

osx10.6 keeps freezing how can I fix without turning power off? It has happened a dozen times in the last ten days -
Force Quit will not respond
When the freeze occurs the cursor will move, but not activate any application
The only way to restore activity is to turn off MacBook with power button
I do not like doing this, and am happy that so far Time Machine has not stopped functioning when I turn power back on.

Yesterday my macbook pro freezed again, two times in 20 minutes!!!
When i restarted the computer there was this message (maybe it is useful for resolving my problem):
Interval Since Last Panic Report: 29598 sec
Panics Since Last Report:          2
Anonymous UUID:                    0C2CFCCA-8A3F-445F-89D3-99573F5C31AA
Fri Jun 3 19:26:42 2011
panic(cpu 1 caller 0x9cdc8f): NVRM[0/1:0:0]: Read Error 0x00002500: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x92000000 0x36a0c000 0x084700a2, D0, P0/4
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0xe036b8 : 0x21b510 (0x5d9514 0xe036ec 0x223978 0x0)
0xe03708 : 0x9cdc8f (0xbe323c 0xc53840 0xbf23cc 0x0)
0xe037a8 : 0x15c7a7d (0x6255c04 0x6cd3004 0x2500 0x6cd3004)
0xe037e8 : 0x15b8d5e (0x6cd3004 0x2500 0x0 0x0)
0xe03868 : 0x15af132 (0x6cd3004 0x6d95004 0x41 0xe038a0)
0xe03988 : 0xad3b45 (0x6cd3004 0x6d95004 0x996500c 0x200)
0xe039c8 : 0xb52a66 (0x6cd3004 0x6d95004 0x7bcc52c 0x7bcc504)
0xe03a78 : 0xb542d7 (0x6cd3004 0x6d9d404 0x0 0x0)
0xe03b08 : 0x15adf19 (0x6cd3004 0x6d9d404 0x6 0x2)
0xe03b88 : 0x15b7f8e (0x6cd3004 0x6d95004 0x1010 0xe03c9c)
0xe03cf8 : 0x15ef33e (0x6cd3004 0x6d95004 0x0 0x0)
0xe03e28 : 0xb07250 (0x6cd3004 0x6d13004 0x0 0x0)
0xe03e68 : 0x9d6e23 (0x6cd3004 0x6d13004 0x0 0x0)
0xe03f08 : 0x55125b (0x0 0x63d1780 0x1 0x29f562)
0xe03f58 : 0x55028c (0x63d1780 0x1 0xe03f88 0x54fe43)
0xe03f88 : 0x5506e6 (0x63b73c0 0x6805b7c 0x16808f71 0xffffffff)
0xe03fc8 : 0x2a06dc (0x63b73c0 0x0 0x10 0x66b87a4)
      Kernel Extensions in backtrace (with dependencies):
         com.apple.nvidia.nv50hal(6.2.6)@0x14c5000->0x18d9fff
            dependency: com.apple.NVDAResman(6.2.6)@0x967000
         com.apple.NVDAResman(6.2.6)@0x967000->0xc54fff
            dependency: com.apple.iokit.IOPCIFamily(2.6)@0x927000
            dependency: com.apple.iokit.IONDRVSupport(2.2)@0x95a000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x938000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10J869
Kernel version:
Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 702931547147
unloaded kexts:
com.apple.driver.AppleFileSystemDriver          2.0 (addr 0x102a000, size 0x12288) - last unloaded 112769797938
loaded kexts:
com.vmware.kext.vmnet          3.0.0 - last loaded 49645686211
com.vmware.kext.vmioplug          3.0.0
com.vmware.kext.vmci          3.0.0
com.vmware.kext.vmx86          3.0.0
com.sophos.kext.sav          7.3.0
com.bresink.driver.BRESINKx86Monitoring          8.0
com.apple.driver.AppleHWSensor          1.9.3d0
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AppleHDA          1.9.9f12
com.apple.kext.AppleSMCLMU          1.5.0d3
com.apple.driver.AppleUpstreamUserClient          3.5.4
com.apple.driver.AppleMCCSControl          1.0.17
com.apple.driver.AirPort.Atheros21          424.14.5
com.apple.driver.AppleIntelMeromProfile          19.1
com.apple.driver.AppleBacklight          170.0.34
com.apple.driver.SMCMotionSensor          3.0.0d4
com.apple.driver.ACPI_SMC_PlatformPlugin          4.5.0d5
com.apple.driver.AudioAUUC          1.54
com.apple.GeForce          6.2.6
com.apple.driver.AppleLPC          1.4.12
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.iokit.CHUDUtils          364
com.apple.iokit.CHUDProf          366
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AppleUSBTrackpad          200.3.2
com.apple.driver.AppleUSBTCKeyEventDriver          200.3.2
com.apple.driver.AppleUSBTCKeyboard          200.3.2
com.apple.driver.AppleIRController          303.8
com.apple.iokit.SCSITaskUserClient          2.6.5
com.apple.BootCache          31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.driver.AppleUSBHub          4.1.7
com.apple.iokit.IOAHCIBlockStorage          1.6.3
com.apple.driver.AppleSmartBatteryManager          160.0.0
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleAHCIPort          2.1.5
com.apple.driver.AppleFWOHCI          4.7.1
com.apple.driver.AppleUSBEHCI          4.1.8
com.apple.driver.AppleUSBUHCI          4.1.5
com.apple.iokit.AppleYukon2          3.2.1b1
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleACPIButtons          1.3.5
com.apple.driver.AppleSMBIOS          1.6
com.apple.driver.AppleACPIEC          1.3.5
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          105.13.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.11
com.apple.driver.AppleIntelCPUPowerManagement          105.13.0
com.apple.driver.DspFuncLib          1.9.9f12
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.driver.AppleHDAController          1.9.9f12
com.apple.iokit.IOHDAFamily          1.9.9f12
com.apple.iokit.IO80211Family          314.1.1
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.IOPlatformPluginFamily          4.5.0d5
com.apple.nvidia.nv50hal          6.2.6
com.apple.NVDAResman          6.2.6
com.apple.iokit.IONDRVSupport          2.2
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOGraphicsFamily          2.2
com.apple.iokit.IOBluetoothSerialManager          2.4.0f1
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.driver.AppleSMC          3.1.0d3
com.apple.iokit.CHUDKernLib          365
com.apple.iokit.IOAudioFamily          1.8.0fc1
com.apple.kext.OSvKernDSPLib          1.3
com.apple.iokit.AppleProfileFamily          41.4
com.apple.driver.CSRUSBBluetoothHCIController          2.4.0f1
com.apple.driver.AppleUSBBluetoothHCIController          2.4.0f1
com.apple.iokit.IOBluetoothFamily          2.4.0f1
com.apple.iokit.IOUSBHIDDriver          4.1.5
com.apple.driver.AppleUSBMergeNub          4.1.8
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.5
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6
com.apple.driver.XsanFilter          402.1
com.apple.iokit.IOATAPIProtocolTransport          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.5
com.apple.iokit.IOUSBUserClient          4.1.5
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOAHCIFamily          2.0.4
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IOUSBFamily          4.1.8
com.apple.iokit.IONetworkingFamily          1.10
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.5
com.apple.iokit.IOSMBusFamily          1.1
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          6
com.apple.driver.DiskImages          289
com.apple.iokit.IOStorageFamily          1.6.2
com.apple.driver.AppleACPIPlatform          1.3.5
com.apple.iokit.IOPCIFamily          2.6
com.apple.iokit.IOACPIFamily          1.3.0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x87), Atheros 5416: 2.1.14.5
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: WDC WD5000BEVT-00A0RT0, 465,76 GB
Parallel ATA Device: MATSHITADVD-R   UJ-857E
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021b, 0x5d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
Any ideas?

Keep losing signal & poor speed

Hi
Over the last few days I keep losing my internet connection, I've run several speed tests today connected directly to the router with an ethernet cable & master socket and I'm still struggling to get more than 0.5Mb - usually we average 1.5Mb (Warmwell exchange)
I've tried replacing the router for a brand new netgear as the BT homehub kept losing the signal even at our old address but it's made no difference and over the last 48 hours it's become unbearable.
I've done the test using speedster.btcom, that also shows 0.5Mb.
There are no listed service issues in my area so what's going on?
Cheers,
Andy.

Hi Welcome to the forums
Here are some help pages done by CL Keith http://forumhelp.dyndns.org/speed/Speed.html
also post your full hub stats by entering 192.168.1.254 into your web browser address bar and navigate to adsl or use a-z, if netgear enter 192.168.0.1
Can you also post the full results from BT Speedtest speedtester.bt.com
Have you tried connecting to the test socket at the rear of the master socket
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

MacAir keeps losing signal

MacAir keeps losing signal

Open System Preferences (from the dock, or under the Apple icon in the menu bar).
Choose "Network". Then choose "Assist me ..." on the bottom. Then choose "Assistant ...". It should help.

Good Signal, but not Internet with built-in Airport card

Hi,
I'm sorry if this is a duplicate question, but I couldn't seem to find a similar situation. I'm trying to get my wireless (or any) Internet working at my house with my Powerbook G4 with a built-in Airport card. We have a Linksys 802.11g router with no security enabled. My mac is picking up a very strong signal, but everytime I go to Safari, iTunes, or Explorer it says there's no internet connection present (yet internet connect and my network says I'm connected through Airport).
I've had my wireless and ethernet working on this computer before -- picking up a variety of signals, including other linksys routers. All of the PCs in the house are working fine with this, and my mac even shows up on our router list.
The most recent experience I had with internet on my mac was earlier this week--i took it into my work to do some testing and we had to set up a specific location to get it to work through that ethernet network. When I took it home, I removed all of those configurations and tried both my wireless and ethernet, and I can not get either working. At this point, I've removed all of my configurations and tried reconfiguring. Everything but my airport is turned off. No proxies are selected. I've turned off the iPv6. I'm using DHCP (which is showing the correct router and IP address). I've deleted the System Configuration folder from Preferences. And it's on the top of the list in network and have selected Airport as the default. And none of this seems to be working. Oh, and I tested to see if it was a DNS problem (which I head read in one discussion forum), and that didn't fix it. I'm sure it's something simple that I'm missing. But I can't for the life of me get it to work.
Does anyone have any thoughts? suggestions? insights? help?
Please? I'm pulling my hair out trying to figure out what this could be.
Thanks so much in advance.
meg.

Joel,
I am having the same exact problem and have had it for months now.
Here is my tcpdump, hope you can help.
Last login: Sat Sep 2 11:46:05 on ttyp1
Welcome to Darwin!
Orion:~ tarlach$ sudo tcpdump -nni en1
Password:
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on en1, link-type EN10MB (Ethernet), capture size 96 bytes
12:54:33.236551 IP 169.254.196.234 > 224.0.0.251: igmp v2 report 224.0.0.251
12:54:33.635688 IP 169.254.196.234.5353 > 224.0.0.251.5353: 0 [5q][|domain]
12:54:33.635896 fe80::20d:93ff:fe84:ba8c.5353 > ff02::fb.5353: 0 [5q][|domain]
12:54:34.647999 IP 169.254.196.234.5353 > 224.0.0.251.5353: 0*- [0q] 9/0/0[|domain]
12:54:34.648258 fe80::20d:93ff:fe84:ba8c.5353 > ff02::fb.5353: 0*- [0q] 9/0/0[|domain]
12:54:35.436941 fe80::20d:93ff:fe84:ba8c > ff02::fb: HBH icmp6: multicast listener report max resp delay: 0 addr: ff02::fb [hlim 1]
12:54:35.648474 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 00:0d:93:84:ba:8c, length: 300
12:54:35.954863 fe80::20d:93ff:fe84:ba8c > ff02::2: icmp6: router solicitation
12:54:41.635570 IP 169.254.196.234.5353 > 224.0.0.251.5353: 0 [5q][|domain]
12:54:41.635820 fe80::20d:93ff:fe84:ba8c.5353 > ff02::fb.5353: 0 [5q][|domain]
12:54:42.647940 IP 169.254.196.234.5353 > 224.0.0.251.5353: 0*- [0q] 9/0/0[|domain]
12:54:42.648177 fe80::20d:93ff:fe84:ba8c.5353 > ff02::fb.5353: 0*- [0q] 9/0/0[|domain]
12:54:43.804966 IP 192.168.2.4.631 > 192.168.2.255.631: UDP, length: 112
12:54:44.472343 fe80::20d:93ff:fe84:ba8c > ff02::2: icmp6: router solicitation
12:54:44.534688 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 00:0d:93:84:ba:8c, length: 300
12:54:52.940381 fe80::20d:93ff:fe84:ba8c > ff02::2: icmp6: router solicitation
12:54:53.020918 IP 192.168.2.4.631 > 192.168.2.255.631: UDP, length: 83
12:54:53.457391 arp who-has 192.168.2.1 tell 0.0.0.0
12:54:53.457981 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 00:0d:93:84:ba:8c, length: 300
12:54:53.458573 arp reply 192.168.2.1 is-at 00:11:50:4f:4a:40
12:54:55.785686 IP 192.168.2.4.631 > 192.168.2.255.631: UDP, length: 76
12:54:57.635663 IP 169.254.196.234.5353 > 224.0.0.251.5353: 0 [5q][|domain]
12:54:57.635911 fe80::20d:93ff:fe84:ba8c.5353 > ff02::fb.5353: 0 [5q][|domain]
12:54:58.646996 IP 169.254.196.234.5353 > 224.0.0.251.5353: 0*- [0q] 9/0/0[|domain]
12:54:58.647240 fe80::20d:93ff:fe84:ba8c.5353 > ff02::fb.5353: 0*- [0q] 9/0/0[|domain]
12:55:01.016643 fe80::20d:93ff:fe84:ba8c > ff02::2: icmp6: router solicitation
12:55:02.149064 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 00:0d:93:84:ba:8c, length: 300
12:55:09.439854 fe80::20d:93ff:fe84:ba8c > ff02::2: icmp6: router solicitation
12:55:10.767834 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 00:0d:93:84:ba:8c, length: 300
12:55:15.139955 IP 192.168.2.4.631 > 192.168.2.255.631: UDP, length: 112
12:55:17.499395 fe80::20d:93ff:fe84:ba8c > ff02::2: icmp6: router solicitation
12:55:19.379023 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 00:0d:93:84:ba:8c, length: 300
12:55:25.597876 fe80::20d:93ff:fe84:ba8c > ff02::2: icmp6: router solicitation
12:55:27.120694 IP 192.168.2.4.631 > 192.168.2.255.631: UDP, length: 76
12:55:29.634050 IP 169.254.196.234.5353 > 224.0.0.251.5353: 0 [5q][|domain]
12:55:29.634282 fe80::20d:93ff:fe84:ba8c.5353 > ff02::fb.5353: 0 [5q][|domain]
12:55:30.646358 IP 169.254.196.234.5353 > 224.0.0.251.5353: 0*- [0q] 9/0/0[|domain]
12:55:30.646601 fe80::20d:93ff:fe84:ba8c.5353 > ff02::fb.5353: 0*- [0q] 9/0/0[|domain]
12:55:34.186230 IP 192.168.2.2.5353 > 224.0.0.251.5353: 0 [2q] PTR? daap.tcp.local. PTR? raop.tcp.local. (46)
12:55:55.076547 IP 192.168.2.4.631 > 192.168.2.255.631: UDP, length: 83
I cut it off as it seemed to want to just keep running.
I am unable to get online in my own wep network, I can connect and get a strong signal b ut that is all.
Please, if you can, help.
thank yhou

I keep losing my Firefox Toolbar along with my other Tool Bars.

I keep losing my Firefox Toolbar so I can not get to my Bookmarks, Tools etc. Today I have no Tool Bars at all.

''If you do not have a tab bar, just page content from corner to corner:''
Could you check that Firefox didn't switch to its full screen view? You can switch that using either:
* F11 key on the keyboard
* slide the mouse all the way to the top of the window and watch for the tabs and toolbars to slide down, right-click a blank area of the tab bar > Exit Full Screen Mode
''If it's a regular window with a tab bar but no toolbars:''
This could be caused by an incompatibility with one of your extensions, or a corrupted data file.
If you tap the Alt key or press F10, can you call up the classic menu bar (File, Edit, View...)? If so, try Firefox's Safe Mode. That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
From the Help menu, choose Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins will still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Do you have your toolbars in Safe Mode?

WRT310N version 1: Port 4 light is on but nothing is connected after power cycle

I have the WRT310N version 1 with the latest firmware date Dec 2009. Everything is working great except when I turn off the router and power back up. I am only using port 1 but after a power cycle both port 1 and port 4 lights are on and I can't connect to the Internet. If I keep unplugging the router (2 to 5 times) with 30 secs between I can eventually get just the port 1 light and then everything is good to go until the next power cycle. I don't need or want to keep my router on 24/7 so any advice is greatly appreciated. Thanks in advance!

Hello.
Try to hard reset the router by pushing the button for 30 secs then power cycle it again.
What if you plug the computer to the other ports? Do you experience the same problem? Have you tried a different cable to connect the computer?
Not sure if reflashing the firmware could help on this one but you could also give that a try. click here
Make sure you know the hardware version of your router before reflashing the firmware. It is found underneath the router itself.

YouView box horribly slow and keeps losing signal.

We've had our box for several months now and have been generally happy with it.
Over the last few weeks though it has become almost unusable. The following problems exist:
It is very slow to respond to commands from the remote. Press a button and nothing happens for several seconds. Then the requested action begins but then freezes again; as an example if I press "3" to change to channel three nothing happens for several seconds. Then the number 3 appears on the screen and again nothing further happens for up to 20 seconds before the channel finally switches over.
The channel guide has become veerrryyyy slooowww... Again it takes several seconds for the guide to appear after which it hangs on"loading" for ages, sometimes for ever.
Finally. Several times a week on switching on from standby an error message tells us there is no signal. And the only way to recover from this is to do a hard power off and switch back on. Once this is done the box is OK for 1 to 3 days before the same fault recurs.
There is no signal problem as verified by other devices that receive the same signal in other locations in the house.
The box is currently virtually unusable and has been so for a free weeks now. It's a shame because up till then it's been pretty good.
How do we resolve these issues?

Did you fill in the Contact form as requested?
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Radeon card keeps losing signal in games in 8x AGP mode.

I have a problem with my boardand i was wondering if anyone else had the same problem.
i have a MSI K8t Neo2
Athlon 64 3500+ (Venice)
Radeon x850xt PE
1 gig ddr 3200 ram in dual channel
In 3d applications my monitor looses signal so i thin ktis a graphics card failure. It only happens in 8x AGP mode, when i use 4x mode everything is lovely and stable.
I have to keep rebooting and its getting annoying, id rather run my system in 8x mode than 4x mode even if i only gain marginal performance increases.
I have all the latest drivers and bios.
the gfx card has fast writes on and vlink 8x on. the frequency is set at 66mhz. The voltage is set at default ( with higher voltages the problem seems worse)
I am wondering if the problem is related to the Ram as its running in dual channel but the 2 modules are not a matched pair but are by the same manufacturer I belive they run at the same timings.
I know its not the cards fault as i just upgraded fro ma 9700 pro and the same problem occured.
Is this a fixable solution or do i just have to wait for a new bios???
Thanks
Adam

I doubt it. Certain ATi cards are known to be at odds with this board. I suspect it can and will eventually be fixed in Bios but I am not an authority on the matter. If you suspect it's your board maybe the better part of vallor is to contact MSI and explain the issue to them. If they feel it's your board then they will give you an RMA. Some folks have done certain testing on an issue in the past and MSI has sent them a specific Bios version to test out as well. So it is hard to say how they will handle the issue unless you get hold of them.
http://support.msi.com.tw

9800 keeps losing signal displaying sos

My torch 9800 is always displaying sos. I have tried a new sim card, tried rebooting it and manual signal search but nothing work. Help does any 1 else have this problem

Hello ebourneus21,
Welcome to the BlackBerry Support Community.
The following article will provide you with more information regarding the SOS signal on your BlackBerry® Torch™ 9800 smartphone smartphone:
Network status indicator shows "SOS" on the BlackBerry smartphone - http://www.blackberry.com/btsc/KB03448
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Why do i suddenly keep losing signal strength?

All of a sudden, my signal strength for Airport Extreme keeps falling and disappearing. This hasn't happened before and all connections are fine, the modem and router haven't been moved and my laptop is where it has always been.
Does anyone know why this is happening and what i can do to increase signal strength?
Thank you
Chandni

Find out what channel the neighbour's network is on using the Airport Traffic Control Widget and ensure your channel is at least three channels away.
If it is a phone then try your network on channels 1 or 11.
iFelix

Sky HD box keeps losing signal but is fixed with a power cycle

Similar Messages

Maybe you are looking for